Using the recompose tool

What am I doing wrong? Using the recompose tool I highlight areas in green to keep and highlight areas in red for deletion but when I move the sliders everything is still in the photo. What am I missing?

If you moving the threshold slider , then I would like to tell you that moving this slider decides how much recompose you want to apply to the photo. For eg 100% value of this slider means 100% recompose while a 0% is equal to a simple tranform of the image.
You have to drag the handle on the sides of image to apply recompose or you can also choose a preset from the preset dropdown in the option bar .

Similar Messages

Adobe Photoshop CS4/5 Crashes when using the Move Tool

Hello. I'm here because I'm having an issue with Photoshop.
I was trying out CS5 when it started to crash every time I tried to use the Move Tool. It was the generic error message: "Adobe Photoshop CS4 has stopped working.
A problem has caused Adobe Photoshop CS4 to stop working correctly. Windows will close the program and notify you if a solution is available."
Thinking that it was a CS5 issue, I went back to my copy of CS4, only to find the same thing happening there (I also downgraded because CS5 was also crashing at other random times for some reason, but that's an issue for another time).
This puzzles me because both were working fine before. Granted, I hadn't opened them for a while, but it was a sudden thing.
My first impulse was to uninstall and reinstall CS4. No luck. So then, I uninstalled all third-party plugins, thinking that might be it. Still, the same problem. I started looking around on Google for solutions and found the instructions on resetting the Tool preferences (I chose to reset the preferences for ALL of the tools). When that didn't work, I tried deleting the preferences file outright, which said instructions recommended. Nothing.
I should note that Photoshop crashes when using the Move Tool to move an object without ant lines around it, i.e., a layer. I'll move the object, and after two to three seconds, the mentioned error message will appear and Windows will close Photoshop. This, however, only seems to happen after selecting, copying, and pasting part of a large object with some variation of the Marqee Tool (thus making that part a new layer by default) while working at a zoom of 100%. So, in short, working with a large image like <a href=http://www.wallpaper4me.com/images/wallpapers/ergo_proxy_267_1280-862301.jpeg>This</a> at 100% zoom. The image linked is the image that I was using and am currently using to reproduce the problem. It is 1280x1024 pixels. I have tested this with somewhat smaller, yet comparable images too. Same problem. I have never had this problem working with large images before, and I wonder if anyone has any suggestions short of formatting my hard drive.
The error code, from Event Viewer:
Faulting application name: Photoshop.exe, version: 11.0.2.0, time stamp: 0x4bf2d4f6
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x65637275
Faulting process id: 0xe28
Faulting application start time: 0x01cb2bb3471d87bf
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
Faulting module path: unknown
Report Id: b412e368-97ab-11df-8f49-001d60b646ef
Details:
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2010-07-25T05:15:57.000000000Z
EventRecordID
78845
Channel
Application
Computer
Gatherum
Security
EventData
Photoshop.exe
11.0.2.0
4bf2d4f6
unknown
0.0.0.0
00000000
c0000005
65637275
e28
01cb2bb3471d87bf
C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
unknown
b412e368-97ab-11df-8f49-001d60b646ef
Details in XML View:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-07-25T05:15:57.000000000Z" />
<EventRecordID>78845</EventRecordID>
<Channel>Application</Channel>
<Computer>Gatherum</Computer>
<Security />
</System>
- <EventData>
<Data>Photoshop.exe</Data>
<Data>11.0.2.0</Data>
<Data>4bf2d4f6</Data>
<Data>unknown</Data>
<Data>0.0.0.0</Data>
<Data>00000000</Data>
<Data>c0000005</Data>
<Data>65637275</Data>
<Data>e28</Data>
<Data>01cb2bb3471d87bf</Data>
<Data>C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe</Data>
<Data>unknown</Data>
<Data>b412e368-97ab-11df-8f49-001d60b646ef</Data>
</EventData>
</Event>
System Specifications:
Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7600)
System Manufacturer: HP-Pavilion
System Model: GN697AA-ABA a6214x
Processor: Intel Pentium Dual CPU E2160 @ 1.80 GHz (2 CPUs)
Memory: 2048MB RAM
DirectX Version: DirectX 11
Display Device:
Name: NVIDIA GeForce 8600 GTS
Manufacturer: NVIDIA
DAC Type: Integrated RAMDAC
Approx. Total Memory: 1010 MB
Current Display Mode: 1440 x 900 (32 bit) (60 Hz)
Photoshop Version: CS4 Extended 11.0.2

Even a decent RAM upgrade is usually only a few hundred dollars nowadays, but it's not a trivially simple process. That said, with a little research and care you can do it. Alternatively, you can hire people (e.g., "Geek Squad") to do such an upgrade.
First, you'll need to know what your operating system capacity is. For example, a 32 bit Windows system can really only use up to a bit more than 3 GB of RAM, while a 64 bit Windows system can use all the RAM you can find a place to plug in. What version of Windows are you running?
Then you'll need to determine what RAM you have installed and what your computer's maximum RAM capacity is - usually you can do this through internet research, either by visiting your computer manufacturer's web site or doing google searches. There are even RAM manufacturer web sites that will tell you what kind of RAM your computer needs and suggest sources, for example:
http://www.kingston.com/
It may be that you can just plug additional chips into currently empty sockets, or it is possible you'll need to replace the RAM chips you have installed in your computer to make room for an upgrade. Every computer is different.
If you list your computer model and current RAM that you have installed here, it may be that someone can help with more specific advice.
-Noel

Photoshop CC 2014 Crashes Randomly when using the Text Tool...

Since the most recent Photoshop update, CC 2014 has been extremely buggy and completely unstable on my Mac Pro, which is inexcusable from a paid service . The most common crash for me occurs when I try to use the “text tool” or attempt to edit text (usually the color). I am occasionally prompted with a window stating, “Could not complete your request because of a program error” and then Photoshop crashes seconds after.
After the initial crash and Apple’s various prompts I usually go through 2-3 consecutive cycles of Photoshop attempting to open back up and crashing over and over again.
I’ve attempted signing out and back in to my Creative Cloud as suggested in several threads, but that was unsuccessful in mitigating the crashing. Is there a fix for this, other than uninstalling and reinstalling? My studio has too many upcoming deliverables and deadlines to do a fresh install, so suggestions/solutions would be appreciated .
Problem Report
Process:         Adobe Photoshop CC 2014 [3736]
Path:            /Applications/Adobe Photoshop CC 2014/Adobe Photoshop CC 2014.app/Contents/MacOS/Adobe Photoshop CC 2014
Identifier:      com.adobe.Photoshop
Version:         15.1.0 (15.1.0.148)
Code Type:       X86-64 (Native)
Parent Process: launchd [150]
Responsible:     Adobe Photoshop CC 2014 [3736]
User ID:         502
Date/Time:       2014-08-18 14:39:11.590 -0700
OS Version:      Mac OS X 10.9.4 (13E28)
Report Version: 11
Anonymous UUID: D2E627F5-FA78-7D87-F2B5-7C57B55C541F
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x00000000deadbeef
VM Regions Near 0xdeadbeef:
-->
    __TEXT                 00000001022de000-0000000106ab5000 [ 71.8M] r-x/rwx SM=COW /Applications/Adobe Photoshop CC 2014/Adobe Photoshop CC 2014.app/Contents/MacOS/Adobe Photoshop CC 2014

Sorry for the lack of the report it was my first time reporting an error for software... Never had an issue before.
I haven't experienced the crash via text tool since I posted the question, but the Photoshop is still constantly crashing at startup, but every time I try to enter the report I get the error: Please try again later.m5

In version 5, how do I use the selection tool to move objects?

I can use the selection tool to select objects, but when I try to drag it, nothing happens. My workaround is to use the selection tool to select an object, and then use the transform tool to drag the object into its new position. Any help is greatly appreciated.

is your object locked?
Message was edited by: lilia@
... or perhaps your clicking on the content grabber?

How do I use the brush tool on a video in cs6? It only stays on one frame?

How do I get what I create with the brush tool to stay on every frame in my video? I've got some footage of a car trip and I'm trying to use the brush tool to make a super 8 looking border, but it vanishes when I play the video because its only on one frame.

When Photoshop just won't work properly, try replacing the Preferences file by using this procedure:
Open Photoshop and save your custom goodies. Choose Edit→Presets→Preset Manager to save sets of styles, brushes, and other such bits and pieces you created. Use the Save Actions command in the Actions palette menu to save any sets of custom Actions.
Review your Preferences. Open Photoshop's Preferences and go through each pane, noting your preferred settings so that you can restore your work environment later.
Quit Photoshop. You can close the program like this:
On a Mac: Hold down Command+Shift+Option and restart Photoshop. When prompted, release the modifier keys and confirm, that yes, you do want to replace the Photoshop settings.
On a PC: Restart Photoshop; immediately press and hold down Ctrl+Shift+Alt. When prompted, release the modifier keys and confirm, that yes, you do want to replace the Photoshop settings.

Unable to Open RPD in online mode by using the Admin tool in OBIEE 11g.

Hi All,
I Installed OBIEE 11g (11.1.1.5) in Linux Box.
When I am trying to Open the RPD in online mode by using the Admin tool, I am facing the below error.
Logon failed due to:[nqsError:43113] Message returned from obis
[nQSError:13037] Cannot connect to BI Security Service,please make sure this is running properly (with SSL ot not) in EM.
[nQSError:37001] Couldnot connect to the Oracle BI Server Instance.
All my services are up and the status are Alive,My biserver is in Running Mode and I am able to open the Answers page too.
I am able to open the same RPD in Offline mode but not in Online mode.
I Created a System DSN in ODBC Data Source Administrator for opening the RPD by using the OracleBIServer1 driver,still the issue doesnt resolve.
Any help is highly appreciated.
Thanks,
Praveen.
Edited by: 885630 on Dec 21, 2011 3:33 AM

Hi All,
This question is answered.
The Resolution is
While Installing the RCU i created two instances so the RPD is not able to take the correct instance.After deleting the other instance now i am able to open the RPD in online mode as it is pointing to only one instance.
Thanks,
Praveen.

Using the rotate tool and hand tool at the same time in CS6

When using the rotate tool, you used to be able to use the hand tool even when the Rotate dialogue box was up. Is there a way to get that back?
I make Mandalas (http://www.behance.net/gallery/Mandala/2700497) and work from the center out. This poster is 18"x24" so once I start to get to the outer edge, I'm zoomed into the center at 6400% so I can get my crosshairs as precise as I can, then enter a number (45 degrees, 20 degrees, etc.). Clicking Preview helps, but if you're zoomed in and the object is out of view, you have to guess where it's going. In CS5, you could press down the space bar and use the Hand Tool even while the dialog box was up. Is there a fix for this? (Sorry if this doesn't make sense...it's kind of hard to explain over a forum.)

TBamber wrote:
When using the rotate tool, you used to be able to use the hand tool even when the Rotate dialogue box was up. ....
CS5 on Windows 7.
I can use the hand tool while pressing the Space bar while another tool including the Rotate tool is current. But I can not use the Hand tool in anyway if I'm in the process of using the Rotate tool by holding down the mouse button or dragging with it.
While the Rotate dialog is displayed I can not do anything outside of it in any way.
I can use the scroll wheel on the mouse to scroll the view up or down vertically while using any of the tools including the Rotate tool but not when a tool dialog is open.
I'm curious if others experience different behavior on a Windows system .

How can I add to an existing path using the pencil tool?

This probably seems like a rather elementary question, but
whenever I draw a path using the pencil tool, reselect it,
hover over the endpoint, and the click and drag to extend
the line off into a different direction, Illustrator will often
(but not always) erase the existing path and leave only the
new one that I drew.
To wit:
In step 1 above, I draw a line with the Pencil tool.
In step 2 above, I reselect the line from step 1, hover over the endpoint, and then continue to draw further.
However, as can be seen in step 3, the line from step 1 disappears after I draw the new path.
I am aware of the pencil setting, "Edit selected paths", and I have checked it to edit selected paths
within 12 pixels for the above example. What I am doing in the above example, and what I
want to do, is to be able to add more paths onto an existing one using the pencil tool,
rather than have a completely new path being drawn every time I lift up my pen to finish
drawing the previous path.
I also realize that I can do this with the pen tool; but the pen tool is a more
precise tool (and somewhat more cumbersome), and I prefer to have more
of the rough-handed look from time to time.
Finally, I also know that I can use the direct selection tool to select endpoints
from two different paths and then join them using the join command;
but this seems to be more trouble than it's worth in many cases, especially
if I want to do it frequently for a more long and complicated line.
Am I expecting too much out of Illustrator?
Is my idea of how to use the existing tools wrong in this case?
Is there some piece of knowledge I'm missing?
I'm on Illustrator CS5, Mac OS X 10.6.8, using a Wacom Intuos4 tablet.
However, I have confirmed the above on Illustrator CS4 for Mac as well.
Any help or comments would be much appreciated.
Jeff

Thanks @rcraighead - the Live Paint process seems a bit overkill for simply adding
a new path onto an existing pencil path, but I did try the first idea you suggested,
which was tracing a bit over the last part of the existing path and then continuing
on to extend the path. It's a bit imprecise because the existing path gets slightly
modified, but it seems to work pretty well all in all. Nice idea indeed - thanks a million.
I also found that in AI CS5, I can use the selection tool to select all of the paths
in this case and then join them using the join command. I thought I needed to
select individual anchor points for this to work, but it actually works really
well, better than I thought. I seem to recall that previous versions of Illustrator
were a lot more picky with the Join command, but then again this might just
have been my lack of understanding.
I'm curious to know what other solutions to the above problem that other users
might have, so I will leave this question unanswered for a bit...
but I will use your initial technique described - it seems to work
pretty well, in absence of other options Many thanks again for your timely help.
Jeff

After I used the migration tool to transfer contents of my previous MacBook Pro I cannot log in to my new MacBook Pro. I have tried using old and new passwords but to no effect. I cannot use my Apple ID. How can I re-set my MBook to factory setting pls?

I have been a proud owner of Apple products for many years. However, this problem is very frustrating! Any help will be appreciated. I used the migration tool to transfer the contents of my old MacBook Pro to my new shiny MacBook Pro Retina! After migration finished I tried to access my new MacBook Pro retina. However, when asking me to log in it refuses to accept the passwords from either the new MacBook or the old one! I do not have the option of using my Apple ID either.... Please help! Unfortunately, I am past my 90 day Apple Support!!

Restart holding down the CMD+R keys, launch Disk Utility and erase the HD, quit DU, and restore the OS. On first boot, use the Setup Assistant to do the migration. Details in Pondini's Setup New Mac guide.

How can I use the versionning tool to make a coherent solution to export

how can I use the versionning tool to make a coherent solution to export all objects used in my project to other db schema for testing as well as for implementation .
I want to know proper steps to Import/export objects.
while I am exporting my Master repository and work repository then again importing the all , no problem comes all the physical logical schema mapping and mapping between interfaces retains but
while I am trying to export and import one or two packages on the ease of testing then I am getting so many mismatches manually I am setting all why so?
required ur suggestion
Palash Chatterjee

kelly-bot wrote:
Thanks for the tip, but like I said, I dont want to always have to use the arrow keys. Is it not possible to actually DRAG one pixel at a time? I recently upgraded to CC from CS3 and I keep running into things that feel like a downgrade. Super disappointed.
Our posts overlapped there. Are you saying you could reliably drag one pixel with CS3?
What other issues are you having? Things like the Crop tool can feel strange at first, but I promise you you'll never want to use Classic mode once you get used to it.

Can you merge two user accounts on macbook? my wife has created a user on her new macbook , then inadvertently created a second one when using the migration tool. 1st ac has her office 365 install, yet 2nd has her itunes database, docs and contacts.

Can you merge two user accounts on a macbook? my wife has created a new user on her new macbook air then, inadvertently, created a second one when using the migration tool. 1st a/c has her office 365 install, while 2nd has her itunes database, docs and contacts. What is the best way forward to get everything into the one account? Not sure if the office 365 will allow another installation into the second account, otherwise would just do that and delete the first, if that is possible?

There is no merge but you can move data from one account to another via the Shared folder. Data is copied from Shared. Watch your free space when copying. These are large files. Do one at a time if you are on a small drive. After making copy, delete from other users before you start next copy.
Office365 installs in the main Applications folder and is available for all users on the computer. Activation is tied to the drive not the User.

How To Use The Pen Tool in Adobe Illustrator, Photoshop and InDesign CS6 | Creative Suite Podcast: Designers | Adobe TV

In this episode of the Adobe Creative Suite Podcast Terry White shows how to use the Pen Tool to create Art, Frames and to trace images in Photoshop CS6. If you've never used the Pen Tool before, this is your video!
http://adobe.ly/STegFg

With the pen tool in Indesign, is there a way of making the points not join if you want to make a few single lines?

How do I send a 2-10 MHz pulse train to my DAQ 6052E why simultaneously reading in data? I'm using the NIDAQ Tools with Igor Pro.

I need to send a continuous 2-10MHz TTL timing signal to a low pass filter (to set the cutoff frequency) while I collect data from one of the analog inputs. I'm hoping that I can send the TTL signal and collect the data through the same DAQ 6052E board.
I've been told that I can send a pulse train using one of the two counters on the board. But does anyone have more specific advice how to implement this using the NIDAQ Tools extensions to IGOR Pro? In particular I'm concerned about how I can send a continuous TTL signal and simultaneously read data. Or can you just turn on the timing signal and it stays on until it's
turned off again?
Thanks for your help

You can program one of the counters to generate a continuous pulse train. Once programmed to do so the counter needs no further interaction. It will continue to generate the signal until stopped through SW. So you can start the counter using the functions provided to you, then forget about it and program the AI operations.
Christian Loew, CLA
Principal Systems Engineer, National Instruments
Please tip your answer providers with kudos.
Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system,
or for use in hazardous environments. You assume all risks for use of the Code and use of the Code is subject
to the Sample Code License Terms which can be found at: http://ni.com/samplecodelicense

How do I use the move tool in CS5 to put two images on to an A4 sheet?

Have recently upgraded from CS3 to CS5.
I often print out two images on A4 paper. Under CS3 I would simply adjust and crop 2 images to say 7 ins x 5 ins, after that bring up a new A4 sized sheet (file, new), then using the move tool I'd move the two separate images on to the A4 sheet and print. Fine!
Now under CS5, once I've adjusted my first image then try to bring up a second image to adjust that one I seem to lose the first one from the screen. But on going back via Bridge and clicking on the image it re-appears - problem is, I lose the second image.
When I bring up a new A4 sheet neither of the images stay on the screen and there is nothing to move.
Have been into Preferences to see if there is anything there to help but can't see anything.
Does anyone know what is happening here and what I'm doing wrong i.e. how do I get 2 separate images on to an A4 sheet?
Thanks,
Bob Eveleigh.

There have been changes since cs3, mainly that cs5 uses tabs.
Tabs can be confusing if your coming from cs3.
If your in the tabbed mode, try going to Window>Arrange>Tile.
All your open documents should be visible on the screen.
If this is the cause of your frustrations, you can read more here:
http://help.adobe.com/en_US/photoshop/cs/using/WS8599BC5C-3E44-406c-9288-C3B3BBEB5E88.html #WS6389D09B-91D5-4474-9AED-C52AE33356EB
MTSTUNER

Why can't I print to a Zebra 2746e using the report tool kit?

I have read on here how peoople have printed barcodes from LV by sending commands directly to a zebra printer. I am using LV8.2.1 on a windows xp computer. I am sending EPL2 messages to the printer using the report tool kit, but all I get is a couple of line feeds. If I send the commands from a command prompt by coping a test file to the printer port it prints fine. Any thoughts. I have attached my program.
Attachments:
zebra tester.vi ‏22 KB

I tried your code against my printer and it works as advertised. Can you print to other printers with it?
By the way, when assembling a string you should use the Format Into String function instead of a string concatenator with a bunch of inputs. It takes up less room and is easier to interpret when troubleshooting.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Using the recompose tool

Similar Messages

Maybe you are looking for