Using time warner road runner. when I try to open up safari to home page I get error message that this version does not support the "community toolbar" can't proceed until closing the error message. sick of seeing it

using time warner road runner. when I try to open up safari to home page I get error message that this version does not support the "community toolbar" can't proceed until closing the error message. sick of seeing it

That toolbar/ct plugin seems to cause problems for all who install it!
Close Safari, then locate and delete the following files and it should be gone:
/Library/Application Support/Conduit
/Library/InputManagers/CTLoader
/Library/Receipts/ctloader.pkg
/Library/Receipts/<Toolbar name>.pkg
/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
/Users/<User name>/Library/Application Support/Conduit
where / is the root library on your Hard Disk.
If you are running Snow Leopard you should also look here:
Library/launchAgents/com.conduit.loader.agent.plist
Library/Application support/conduit plugins
Also, as mentioned by Gilli2000:
Library/Receipts - If you read it, it has information in it at the bottom referring extensively to "CT" and "community toolbar".
Maybe it is harmless, but trash those items anyway!
Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery.

Similar Messages

I just took over an iPod Touch 3rd. generation, 32GB and when I place it in my Philips docking station to play music, I get a message that " this equipment does not support charging". My question is: Is this an iPod sw or hw issue or is it the dock?

The Philips device is a DCM5090/10 Tower and it should support charging iPod Touch. Any suggestions??

- See:
iPod touch: Hardware troubleshooting
- Make sure the iPod is fully seated in the dock
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Does Phillips say it is compatible with your model iPod and it iOS. Sometimes an iOS update will break compatibility
- Sometimes this works
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

When I try to open a document created in Pages, I get an error message saying "[Document Name" can't be opened." I don't want to lose hours of work; has anyone else encountered this?

When I try to open a document created in Pages, I get an error message saying "[Document Name" can't be opened." I don't want to lose hours of work; has anyone else encountered this?

A few general trouble shooting tips that may apply here:
1. If you used Software Update to do the OS update(s) to reach 10.6.7, go to http://support.apple.com/downloads/ and download and apply the Mac OS v10.6.7 Combo Updater. The Combo Updater contains some fixes that were not included in the incremental updaters used by Software Update.
1a. Check that you have the current version of Pages (and of the other iWork applications) installed. All three applications' current version numbers end in .0.5
2. A common cause of malfunctioning applications is a corrupted preferences file (.plist file). Your Pages '09's plist is at yourname > Library > Preferences > com.apple.iWork.pages.plist
Quit Pages, locate the file and Drag it to the Desktop (or to the Trash).
Restart Pages and attempt to open one of the files.
If all is well, Trash the plist file and empty the Trash.
If there's no change, AND you've made changes to the Preferences that you wish to keep, drag the file back to its previous location, replacing any new one that has been created.
Regards,
Barry

Unable to install photoshop elements 13 on new computer. Error message is: This installer does not support installation on a 64-Bit windows operating system. Please download the 64-Bit version of photoshop elements. How do I do this?

Unable to install photoshop elements 13 on new computer (Windows 8.1 OS). Error message is: This installer does not support installation on a 64-Bit windows operating system. Please download the 64-Bit version of photoshop elements. How do I do this?

You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

When trying to view the Paul McCartney live concert, I received an error that this computer does not support live streaming

When trying to view the Paul McCartney live concert, I received an error that this computer does not support live streaming

If you're referring to streaming via itv.com, the minimum system requirements can be found here.

Ive been trying to update my macbook pro 8,2 firmware from the apple website but first the smc update gives me an error saying that my software does not support that update and belive me i checked and iam downloading the correct one

so basically i was wanting to update my smc firmware and the EFI Boot ROM version but for the EFI Boot Rom when i click on it says page no found and for the smc firmware, when i do download it says that the my software does not support it, even though it is completely compatible, i checked the system requirements given by the page.
iam trying to do this because i have issues with the chargin, it keeps giving me a "not charging" messege.
Help please...

SadisticIron wrote:
i just baught my first iphone and it is a jalbroken
Buzz! Thank you for playing!
Discussing jailbroken devices is forbidden here by the Terms of Service.
You can not get help here.

We have mac os X 10.5.8 we tried to upgrade with the new firefox 4. it removed our old firefox and replaced it with firefox 4. Now we get a message that our system does not support the new firefox. All our bookmarks settings are gone. Please advise.

When we tried to open firefox 4, all previous settings and bookmarks were gone. Firefox 4 gives message that it is not supported by our system. IMAC G5 power PC with 2 gigs of Ram. Is there any way to restore the old firefox?

Hi everyone,
Many of you have had problems with Spotify for Mac OS X 10.5. We no longer support Spotify on this operating system which we announced back in November here as a "heads up".
However, we've noticed that many folks have been updating regardless which should not be the case. Our intention was to let anyone using Mac OS X10.5 continue using a "legacy" version of Spotify. In any case, the folks who were using 10.5 were updated, and in many cases these customers have experienced crashes with the newest version of the application (Spotify version 0.8.8. at the time of writing).
To make a long story short, we messed up in updating folks who should not have been updated and we're sorry. We plan on fixing the problem of Spotify updating to the latest version for Mac OSX 10.5 users and we're working on it as I write this. If you're a person who has already upgraded and the application is crashing, we're looking into a solution and we hope to have an update shortly.
Warm regards from your humble community manager,
Rorey

TS3899 I receive email on my iPad but it will not send. I get a message that my server does not support relaying

I have an iPad and I have no problem receiving mail. My outgoing mail won't send. It makes the sending noise but get a message saying cant send server doesn't support relaying

Sounds like the problem I have. If you are using your iPad and you are out of range of your ISP your iPad looks for your network but seeing you are out of range it will not allow you to transmit on your netwrok. Hope this makes sense.
Good luck.

HT4623 I tried to update my iPad (wirelessly) from iOS 5.1.1 to iOS 7 and I got a message that this version is not compatible with my iPad - any ideas?

I recently tried to update my operating system, but I could not upgrade from iOS 5.1.1 to iOS 7

The Original iPad can only be updated to IOS 5.1.1
Does your iPad have a camera?

Time Warner Road Runner and iCloud setup instructions

I use Time Warner Road Runner for email on my MacBook Pro, my iPad, and my iPhone. I'm confused about how to set up syncing mail using iCloud and a .me mail address when my email has a road runner address. Is there a good step by step instruction available? Do I have to change my .rr email address to one using .me?

I have the same issue. I thouhgt my email would "sync" like my work Outlook emial account, but they do not. If you find a solution, please share!

Error "This class does not support SAAJ 1.3" in oim 11g

hai all,
i have error "This class does not support SAAJ 1.3" when i running create user.
i already tried added in startWeblogic.cmd and in setDomainEnv.cmd :
-Djavax.xml.soap.MessageFactory=weblogic.xml.saaj.MessageFactoryImpl and -Djavax.xml.soap.MessageFactory=com.sun.xml.internal.messaging.saaj.soap.ver1_1.SOAPMessageFactory1_1Impl
step like this site (http://blog.xebia.com/2009/07/14/jax-ws-cxf-and-saaj-on-oracle-weblogic-103/)
i already too set path for = saaj-impl-1.3.jar but the error still same "This class does not support SAAJ 1.3"
i used weblogic 10.3.5, i'm generate soap message used rt.jar (import javax.xml.namespace.QName; etc)
any idea to solving this error ?
thank's
darvesth
Edited by: darvesth on Mar 19, 2013 4:08 AM

thank you darvest, i follow your step before.
but i added any steps after that.
1. include saaj-impl-1.13.jar and saaj-api.jar in project adapter
2. add parameter "SOAPConstants.SOAP_1_2_PROTOCOL" in line code, MessageFactory mf= MessageFactory.newInstance()
-> MessageFactory mf= MessageFactory.newInstance(SOAPConstants.SOAP_1_2_PROTOCOL);
so, my problem already resolve..
i hope this solution usefull to resolve our problem, darvest.
thanks,
Tim BENGA

Error : software component version does not support this object type.

Hi ,
We are getting error as software component version does not support this object type when we try to create Business Object in PI 7.1 ESR .
How can we solve this error.
Regards,
Syed
Edited by: Umar Syed on Jun 11, 2009 12:01 PM

Hi Srinivas,
We are working on Modelling in SAP PI, but we are unable to create any Business Object.. is there any specific steps need to be followed.
Once we login to our ESR from index page we have this option to choose
Available Profiles :         Process Definition
                                   Service Definition
                                   Unregistered.
We are getting the option of new types (_Business Object_) only if we select Unregistered Profile and not in other Profiles . Is there some settings need to be done.
Regards,
Syed

TS1416 It seems the latest itunes version does not support sync functions to ipod classic

I have updated my Itunes to version 11.04 but it seems this version does not support syncing with Ipod classic it seems it only supports the Ipod touch. Does anyone have any solutions for this problem?

Device not recognized. Take note of item 5.
http://support.apple.com/kb/ts1538

When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

You can try downloading the 64 bit version. You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

When I try to open a new window in Firefox, I get an error message

When I try to open a new window in Firefox, I get the following error message:
"Not Found
The requested URL /en-US/firefox was not found on this server."
...but other websites, such as Google or CNN.com, work just fine.
I'm running Firefox 3.6.28 on my MacBook Pro, with OS 10.4.11. I can't update to the latest version of Firefox unless I update my OS, which would be costly and also involve increasing my RAM.
But the Firefox homepage worked fine until this morning. Is this likely to be a temporary glitch? If not, how can I fix it?
Thanks,
Emmy

At least at the moment, the default Firefox homepage is back! So maybe this was a momentary glitch. But see below.
BTW, here's the URL for the page:
http://start.mozilla.org/en-US/?client=firefox-a&rls=org.mozilla:en-US:official
'''But, '''the "Mozilla Firefox Start Page" currently lacks a menu bar at the top with various Google options such as "Gmail," "more," etc. I found these very useful.
I'm wondering -- did Google tell Mozilla to stop including those links on its start page? Maybe Google wants us all to switch to having Google as our default homepage. Or is the lack of a menu bar just another temporary glitch?
Emmy

Using time warner road runner. when I try to open up safari to home page I get error message that this version does not support the "community toolbar" can't proceed until closing the error message. sick of seeing it

Similar Messages

Maybe you are looking for