Using transactio code to execute a report does not show default value

Hi all ,
      I have given a default value of a field on my selection-screen by initialization in a hr report .
I am using PNP database and default selction-screen in hr report category .
While the report is working fine while executing directly , It is not showing default value when executed through a transaction code .
Can any body tell why it is so ?
Thanks & regards
Sun

Did you create the transaction as a report transaction?
Rob

Similar Messages

  • User exit variable I_STEP=1 does not show default value WebI selection scr

    Hello,
    We have a BW query with a user exit variable. We have written user exit code under I_STEP = 1 so that the default value for the field is displayed on the selection screen to the user. Works very well on the BW side.
    We based a universe on top of the query and then created a WebI report.
    When the WebI report is executed the default value is NOT seen on the selection screen,
    Note:
    1. If the user exit variable is optional and we execute the report, the default value is NOT seen on the selection screen. However if the report is executed without entering any value for the field the logic under I_STEP = 1 is picked up and the report gets the correct output
    1. If the user exit variable is mandatoryand we execute the report, the default value is NOT seen on the selection screen. The user now has to enter the value for the field.
    The scheduled reports will work in case of optional user exit variable.
    However this amounts to loss of functionality.
    Is this a known bug?
    Is there a way to display default values based on user exit variables on the WebI selection screen?
    Kindly advice. Btw we are on XI 3.1 SP3
    Rgds
    Edited by: Anup Deshmukh on Jun 29, 2010 11:13 PM

    OSS Note 1285993 - "Support of Customer Exit Variables from BEx query into WebIntelligence via OLAP universe"  deals with this issue and has deemed it out of scope for XI 3.1 SP3.
    Rgds

  • WT reporter does not show split for tax authorities!

    Dear all:
        I need to report for all employees some WTs of taxes, but wt reporter does not show the splits for them (to distinguish federal from statal authorities payments), it is like summarises all the same WTs... I tried payroll recon. report but this one does not output the data in ALV format (im in 4.6 version) so it is not useful to run in bulk
    Do you have any work around for this?
    I would appreciate any tip or workaround on this,
    Thank you!

    Hi
    1. Allocated costs are always treated as Fixed costs, unless you have booked the expenses in FI using Activity Type as Aux Account assignment object
    2. Check whether these costs are included in Inventory valuation in your Cost Comp Str in OKTZ... If not relevant for inv valuation, these costs wont show up for Variance calculations
    br, Ajay M

  • Report S_ALR_87012000 Asset Register does not show correct values sums

    Hi,
    I've taken a look at S_ALR_87012000 transaction - Asset Register (Italy) after an Assets Data transfer and something strange happens:
    1-  the sum of column Depreciation for year is not correct. It is a little bit strange because the single assets depreciation for year is correct. The same problem is in report S_ALR_87011990  - Asset history sheet
    2- if I put  an asset number range or the asset class in the report selection screen the report does not show some of the assets included in the range or in the asset class.
    Could you explain me why? Is there some program bug?
    Thanks in advance
    Giovanna

    Hi
    If you are executing the reports for previous / future years - execute them as of last day of the fiscal year
    The execution for current year can have any date of the fiscal year for report execution
    BR,Ajay M

  • Report similar to MC$4 that does not show absolute values

    Hi all,
    We need a report similar to Report similar to MC$4 which has the same drilldown capabilities but does not show absolute values, and instead shows the proper (actual) values.
    Or if its possible to change something in the MC$4 report to show the actual values and not the absolute.
    Thanks in advance!
    George

    HI
    Your input criteria should contain all plant numbers and the period to be analyzed.  Execute the report and then select:  Plant Analysis\Export\Transfer to XXL\Deselect all options and tick Plant, Storage Location and Month.  Follow the options to export to Excel.  Report will be based on Plant, Storage location and Month.
    Regards

  • After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

    After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

    Ok, the issue seem to be solved. The problem was this:
    The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
    By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
    And then LR is reading them and all metadata information has been set / read correctly.
    So this is solved.

  • Report does not show Quotation price

    Dear friends,
    What may be the reason, that my report does not show the quiotation price, though Sales order price, revenue price shows normal?
    Please give some probabilities.
    Rao

    check your plan profile OPSB if automatic rev planning for both Quotation and Sales order is ticked

  • I have backed my Mac Book pro up to my external hard drive using time machine. My iPhoto now does not show any images, even when I upload from my iPhone

    I have backed my Mac Book pro up to my external hard drive using time machine. My iPhoto now does not show any images, even when I upload from my iPhone

    Mac 101: File Sharing
    Mac OS X 10.7 Help: Transfer files between two Mac computers
    Mac OS X 10.7 Help: Set up a Windows computer to share files with Mac users
    Mac OS X 10.7 Help: Use iDisk to share files
    Mac OS X: Sharing your files with non-Apple computers
    How to share a Mac's files with a PC and vice versa.

  • I can not use the patch command. The icon does not show up on th comand bar.

    I can not use the patch command. The icon does not show up on th comand bar

    Hello there!
    Compared to other versions, in CS6 the patch tool is in a different location:
    If this doesn't help you, what version of Photoshop are you using?
    Please post back with any other questions,
    Janelle

  • Bex report does not show loaded data at once

    Hi experts,
    Why Bex report does not show loaded data at once after loading is finished but after some time?
    Could be the reason of it:
    a) huge amount of data in infocube.
    b) there are no deleting/creating indexes before/after loading, because it takes too much time
    c) anothe reason?
    Thank you,
    Tigr_Z

    Hi Tigr,
    A and B both can be the reasons behind, but normally in case of B option the results on report output can be wrong like duplicates sort of showing you double figures.
    C - it can be resource issue, so please look into all and double check with basis if thats the case.
    Regards
    Sunny

  • ME23n , Does not shows the values correctly in print preview

    Hi,
    When viewing a PO using ME23n , it does not shows the values correctly in the print preview.
    For example;
    This is the vendor & its address.  (check attached image img1.jpg)
    ZERANDIB BUSINESS APPLIANCES
    Number-122/A
    PO BOX 41,112,REID AVENUE
    COLOMBO-04
    When displaying the print preview, it shows only some parts of the above address
    Shows only; (check attached image img2.jpg)
    ZERANDIB BUSINESS APPLIANCES
    PO BOX 41,112,REID AVENUE
    These values are getting from a table called LFA1. I have checked that table & in that table all the values exists correctly.
    I have noted issue is with, having only a single word. (If address or name having only a single word, that is without spaces, it will not going to show in the print preview) -
    In the above example, it is not showing Number-122/A and  COLOMBO-04 (Its a single word. No spaces there)
    If its like --> Number - 122/A   &  COLOMBO - 04 ,  then it will display in the print preview correctly (where there are spaces after - mark)
    check img3.jpg
    If its having more than one word, then it will display correctly in the print preview.  As below;
    ZERANDIB BUSINESS APPLIANCES
    Number - 122/A
    PO BOX 41,112,REID AVENUE
    COLOMBO - 04
    If its 2 or more words, it shows correctly.
    If its 1 word, then its not showing!
    Why it is happening like that? Any ideas how to resolve this issue?
    regards.
    zerandib

    It turns out that this problem went away after the program crashed.  Everything seems to be working well now.

  • Field Explorer in Crystal Reports does not show the same names as Bex Query

    Hi
    I have crystal reports, I can retrieve data from BW Bex Query. But in the field explorer it does not show the names as in the Bex query designer.
    In the Bex query designer a field will have the following technical name 0Debitor and the description is Customer.
    It shows in crystal reports in the field explorer twice as D[0DEBITOR]D and D[0DEBITOR]D. It also does not seperate key figures and characteristics.
    I would like it to display the field explorer as shown in this blog.
    /people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
    Thanks in advance

    Hi,
    take a look here:
    /people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
    make sure you are using the MDX Driver and what happens is that you will see several fields per characteristic. example: one for the key, one for the description, several if modelled for the display attributes
    Ingo

  • Report does not show the main section while calling from forms 6i

    Hi
    I am running report from report from forms 6i but is does not show the data in main section, where as the data in the header section is ok.
    But when i run the same report independantly from report builder it show the both header and main section with relevent data.
    pl solve the matter
    thanks in advance

    can you tell me more about this, you might check if you are using different users when you call this report or if the user has all privileges to see all tables in this report

  • Report does not show data , but data exists in the cube.

    Hi All,
    I have a situation where I could not show the data in the report. When I load data from an extractor 0CO_OM_WBS_1 into a Cube directly I am able to show the data in my report. When I load the same extractor to a DSO and from the DSO when I load it into the Cube, the data does not show up in the query. To check the data I use the same restriction and could see the data reside in the cube (LISTCUBE). I compressed the requests, still it is not showing up in the query. No aggregates create on the cube.
    It shows the data if I load directly from the extractor, but not when I load data thru DSO.
    Any ideas.
    Alex(Arthur Samson)

    Hi Alex,
    I am facing same problem, i have data in cube but in report i cant see....
    i have created a generic DS, i loaded the data to DSO  then CUBE.
    data is loaded succesfully and i can see data in CUBE ( Manage ), when i am running the repory i am not getting data.
    i think you solve this issue... plz help me to resolve this issue.
    Regards,
    SHAIK.

  • The report does not accept the value for apps.fnd_profile.value('USER_ID')

    Hi,
    I followed the below note and added a report to my SSHR menu.
    How To Add A Report To A 11i Self Service Menu [ID 334847.1]
    In my report , I have a condition in the query
    and a.created_by =apps.fnd_profile.value('USER_ID')
    When the report is submitted as a request , it works fine., however the same report when called from the self service page does not accept any value for apps.fnd_profile.value('USER_ID') .
    Is there a workaround to handle this problem.
    regards

    hi,
    I had already tried the option apps.fnd_global.USER_ID too.
    However it does not accept the value for apps.fnd_global.USER_ID.
    We want to call the reports in SSHR using oaf and at the same time the records that are pending for approval created by the employee should only be visible.
    regards
    Maya

Maybe you are looking for

  • HTTP 500 Internal Server Error while starting AppsTier post-clone

    Hello, Adcfgclone scripts on both DB and App Tiers, as well as Adautocfg scripts, complete successfully but I am faced with a "HTTP 500 Internal Server Error" and "The website cannot display the page" through IE when starting R12 Apps post clone. So

  • Outgoing Payment  and Bank Reconcilaition.

    HI All,          I have an issue regarding the bank account balance shown in the Bank G/L account. In case, cheques issued for outgoing payment but do not get cleared for more than a month, how do i carry forward it to the next month so that after re

  • Integrate third party JMS providers with sunone 8

    Hi, I am trying to integrate a JMS provider, FioranoMQ with Sunone Application server (version 8). I have defined an external queue connection factory using the administration console. But I am not able to deploy the EJB as the exception in server.lo

  • "You cannot authorize more than five computers"

    I am unable to play any of my music that I have bought from iTunes music store because when I try to play my music on my new computer it says "You cannot authorize more than five computers". In fact, I only have four computers using my iTunes music a

  • Aptv keeps restarting itself for no apparent reason

    For the last week or two my aptv has been restarting itself, usually when I put a program on pause and come back a few min. later I find I'm back at the icon screen. My software is up to date and my connection is very good so I'm really puzzled as to