Using TVARVC to Dynamically Set the Payroll Period in Standard Reports

Hi,
I am trying to define the selection screen parameters for the Pay Scale Reclassification (RPIPSR00) program such that the payroll period chosen is always +1 of the current period (i.e. the next payroll period).
I understand that I can use TVARVC to dynamically determine the field value of a selection screen variant. The question is after I have created a variable in the table, how do I go about ensuring that the program uses the next payroll period?
Regards,
Augustine

Try reading the help first: http://help.sap.com/saphelp_nw04s/helpdata/en/c0/980398e58611d194cc00a0c94260a5/content.htm
You have to update TVARVC with the desired value - either via a batch program or manually.
matt

Similar Messages

Difference Between Current Day and fist day of the payroll period

Hi,
How do i find the difference between the current day and the first day of the payroll period with period parameter XX.
Operation VARSTFDYXX is used to decide if the current day is the first day of the payroll period. But is there any operation available to check the difference in exact number of days.
I know hrs=y is used to find difference between current day and a date specification record from IT0041, but i need to check difference between current day and first day from a payroll period parameter.
Any response is greatly appreciated.
Thanks,
Imaneul Rajiv

No! haven't seen it at all! Do I have to drain the battery completely and then charge it? I did that the first day I bought the phone and yet the stats are the same for me
PS: I am referring to the Call Time stats and not the Usage/Standby stats

How to dynamically set the name of the generated PDF file sent by email

Hello,
I am using Reports 10g and I managed to send PDF reports by email, specifying the recipient, subject, format etc, using the reports servlet URL.
But there is one thing that I cannot find a way to do: I want to dynamically set the name of the attached file. It defaults to the name of the RDF file (eg monthly_sales.pdf). I would like it to be something more meaningful (eg monthly_sales_072010.pdf, where 072010 is the month and year passed by parameters).
Is it possible to do it?
Thanks
Luis

Use System.load(...) instead of System.loadLibrary(...).

XSL-FO Report Query / Named Layout - Dynamically set the output filename

Does anyone know if it is possible to dynamically set the name of the PDF file which is created via FOP?
Thanks
Paul

John
Thanks for the quick reply, apologies, I should have been more explicit.
I am calling apache FOP via a report query and a named column layout using xsl-fo to format the PDF report.
The call is done via a javascript function which determines which report to print and then submits the approproate REQUEST. The request is picked up by conditional branches and calls the PRINT_REPORT
The PRINT_REPORT names the PDF file as same as the report query name.
BTW the long term goal is to store the resultant output as a blob back in the database but I can put that off to phase II of the project as I'm not sure that this is possible. Would be nice though!
Thanks
Paul

How do you dynamically set the flat file name

Within my process flow I call a mapping. Within this mapping I have a flat file operator (which creates and writes to a .csv file). All working great.
From this process flow I want to be able to pass a parameter to the mapping (which I can do), and use the value of this parameter as the file name of the .csv file. But I can’t seem to be able to dynamically set the ‘Default physical file name’ to this parameter value within the mapping.
Does anyone have any ideas?
Thanks
Ansel

Hi Ansel
Check out the blog entry here;
http://blogs.oracle.com/warehousebuilder/newsItems/viewFullItem$154
You can use an expression.
Cheers
David

Dynamically set the upper limit of a numerical control

I want to dynamically setting the upper limit of a numerical control. The maximal value that is allowed to input is calculated by the code, so that if the value input by the user exceeds the upperlimit, a warning comes out and the input value is automaticaly reset to zero.
I wired the calculated upper-limit to the property node of the numerical control using ''Data Range > Maximum" property, but it does not work as I expected.
Anyone has suggestion on this? Thanks a lot.

Can you attach your code?
Dejun wrote:
... but it does not work as I expected.
I cannot read your mind. What do you expect? What to you see instead?
Overall, you are in a catch22 scenario if I understand you right. If you set the max of the control to coerce to a certain value and you enter a larger value, it will be coerced to the upper limit and the code does not see the original out-of-range value and you cannot successfully test it with a comparison operation. Maybe you can set it to "ignore" instead of "coerce" or not even set an upper limit. Simply use "in range and coerce" and reset the value under the desired conditions (e.g. via a local variable) before handing it to the rest of the code. You could even wrap this into an xcontrol.
LabVIEW Champion . Do more with less code and in less time .

Mail&Exchange, where can i set the sync period for mails?

Hello everybody!
Where can i set the sync period for my mails with an exchange account? At the moment, i can only see the mails since january, i need to see all of my mails since 2010...
Thanks!
Greets
Jan

first you make a bookmark for WINDOWS LIFE MAIL:
https://support.mozilla.com/en-US/kb/how-do-i-use-bookmarks#w_how-do-i-create-a-bookmark
then you can make a shortcut of it(drag it) where you want it:
https://support.mozilla.com/en-US/kb/Sorting%20bookmarks#w_rearranging-manually
add bookmark to toolbar:
http://support.mozilla.com/en-US/kb/Bookmarks%20Toolbar#w_add-bookmarks-to-the-bookmarks-toolbar
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Dynamically setting the number of collumns...

Hi,
I have a report that I need to build. In the requirements I need to dynamically set the number of columns based on the parameters given. I have some ideas on how to do this by building the layout to include all the columns. Then show or hide them based on the parameters passed. I was just wondering if anyone has tried to do something like this? If so, were you successful, and what were some of the major stumbling blocks you ran into. Or if you know of any links to documentation that would help would be great.
On a side note, would doing something like this be handled better if done in Discoverer? I have not used Discoverer before, so I'm not sure myself.
Thanks,
Tom

Hi Tom,
You will find useful information in these notes on Metalink:
261313.1: How to hide columns dynamically without blank spaces ?
1074438.6: How to dynamically set labels based upon globals
28533.1: How to create a dynamic report using lexical parameters for column names
And a comprehensive guide to using lexicals (you will have to use lexicals for column names)
115072.1: Complete Resource Reference for using Lexical Parameters in Oracle Reports
Navneet.

Leaving Action executed in the Middle Of the Payroll Period

Dear All,
I am Trying to execute Leaving action For the Employee in the middle of the Payroll period thereby changing his Employee Group to Pensioner and also his payroll area to that of Pensioner.However the System is not allowing me to do so and is saying that Payroll area cannot be changed in the middle Of the Payroll Period.Plz Suggest what can be done so that the Leaving action Of the Employee can be executed in the Middle of the Payroll Period.
Thanks
Punam Jha

Hi,
In a payroll period, you can not include the same employee in two different payroll processing. Hence, you can assign the new payroll area at the beginning of the next payroll period. Alternatively, execute the separation action with the last date of the pay period.
regards
Mohan M
Edited by: M Mohan on Dec 21, 2009 2:34 PM

How to get the last day of the payroll period

Hi all,
I need to get the last day of the payroll period e.g. last day of Jan 2007 is 31 Jan 2007. Can anyone suggest as to how to get it?
Thanks,
Madhu

T549S contains the payroll periods with pay date. T549Q contains the begin and end dates of the payroll period.
You can select from the appropriate table (or from both depending on your given data) to get the end date of the period.
Hope that helps.
Mary

How do you set the time period on IMAP email accounts (razr maxx)

Hi Guys -
Does anyone know how you can set the time period that the stock email will keep the already downloaded messages for IMAP email accounts?
Mine never seems to show more than a couple of days worth at a time. I'd ideally like to be able to see at least 2 weeks worth of messages without needing to download them again!
On other phones I've had there was a setting in the menu, but either I can't find it...or it's not there. I've found the setting for how OFTEN it checks the accounts, but not the setting I am seeking.
Your help is appreciated!
Best Wishes for the Holiday Season.
-Rich

Hey Rich. Once in 'settings,' there should be a "days to sync' under the 'data usage' section. You don't have that?

[svn] 3148: You can now use CSS styles to set the default text format for TextView.

Revision: 3148
Author: [email protected]
Date: 2008-09-08 15:01:15 -0700 (Mon, 08 Sep 2008)
Log Message:
You can now use CSS styles to set the default text format for TextView. It no longer has any formatting properties. It supports the entire set of Gumbo text format styles.
SkinnableComponent and Group now also support all these styles. However, skins such as ButtonSkin, TextInputSkin, and TextAreaSkin continue for now to specify instance styles on their TextBox, TextGraphic, and TextView, in order to give them a Gumbo look rather than a Halo look. So if you try setting, for example, the fontSize on the Application, it doesn't yet affect the text format of a Button, TextInput, TextArea, etc. unless you remove the instance style in the skin.
Reviewer: Glenn
Bugs: -
QA: Lots of new stuff to test!
Doc: No
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/flex/component/TextArea.as
flex/sdk/trunk/frameworks/projects/flex4/src/flex/component/TextInput.as
flex/sdk/trunk/frameworks/projects/flex4/src/flex/component/TextView.as
flex/sdk/trunk/frameworks/projects/flex4/src/flex/core/Group.as
flex/sdk/trunk/frameworks/projects/flex4/src/flex/core/SkinnableComponent.as
flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/TextBox.as
flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/TextGraphic.as
flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/graphicsClasses/TextGraphicEle ment.as

Nevermind guys - I did it using the 'rb_on.selected' command on the "on" radio button if the .txt file variable was "on", else the "off" radio button is selected.
Thanks for taking a look though!
Shaun

Dynamically set the size of the VIEW

Hello,
I am looking to set the size of my VIEW which is called in following way:
IF iv_show_in_pop_up EQ abap_true.
wd_this->raise_simulation_pop_up( ).
I want to set of the size of the VIEW if it a pop-up.
ENDIF.
How can i get access to the view and set the size. Please Help.
Regards,
Piyush

Hi Piyush,
Check what Anzy has to say in [here|https://forums.sdn.sap.com/click.jspa?searchID=18635339&messageID=3289078]:
"You have to go to specific view , which will be embedded in the pop up window.In the view go to ROOTUIELEMENTCONTAINER and set the width and height.This way you can restrict the size of the pop up window."
This is [another approach|https://forums.sdn.sap.com/click.jspa?searchID=18635339&messageID=5836334] suggested by Abhimanyu Lagishetty for dynamically setting the size of your window:
"Pass the URL like this to the create_external_window
javascript:window.moveTo(0,0);window.resizeTo(screen.width,screen.height);window.location.href="http://google.co.in";
Instead of http://google.co.in write your URL it will maximize the window"
Regards,
Uday

How to Dynamically Select the Data File for a Report at Print Time

How do you configure a Crystal report to ask for the file to be reported on as the report is being printed, and allow the user to browse to the file?
The environment is Crystal Reports XI, SP3, with ODBC connection to Sage Timberline Office data version 9.7. The client names their Payroll unposted time file each pay period, and also needs to report on their posted data file, depending on the time period for the report. The client will need to select both the date range and the file name.
I have created a SQL statement in Add Command in Database Expert, which prompts for a file name, but it does not let you browse to select a file on the computer.
Therefore, in the prompts when they print the report, the parameter offers the user a default file name similar to the name they currently use, so they only have to change the payroll period end date in the supplied file name to run the report successfully.
The client is concerned that sometimes a user will name their data file differently, and not know how to input the file name into the Crystal report prompt at print time.
My research on dynamic prompts showed you can link to fields inside the data record, but I did not see a way to dynamically link to select the actual files used in the report.
Another question is that the naming convention used by the SQL query is different than the basic Windows file name, but I think I can handle that issue.
The actual file name is typically similar to:
04-10-11 BP NEW.PRT
However, in the SQL query, the record ID looks like:
PRT_00-00-00 BP NEW__TIME
The SQL Statement using a parameter is:
SELECT
"PRT_CURRENT__TIME"."Employee",
"EMPLOYEE1"."Employee_Name",
"PRT_CURRENT__TIME"."Date",
"PRT_CURRENT__TIME"."Units",
"PRT_CURRENT__TIME"."Job",
"JOB1"."BP_Emps_Used"
FROM
"PRT_CURRENT__TIME" AS "PRT_CURRENT__TIME"
INNER JOIN "JCM_MASTER__JOB" AS "JOB1"
ON "PRT_CURRENT__TIME"."Job"="JOB1"."Job"
INNER JOIN "PRM_MASTER__EMPLOYEE" AS "EMPLOYEE1"
ON "PRT_CURRENT__TIME"."Employee"="EMPLOYEE1"."Employee"
WHERE "JOB1"."BP_Emps_Used" = 1
AND
("PRT_CURRENT__TIME"."Date" BETWEEN
{?As of Date} - 41 AND {?As of Date})
UNION ALL
( SELECT
"PRT_NEW__TIME"."Employee",
"EMPLOYEE2"."Employee_Name",
"PRT_NEW__TIME"."Date",
"PRT_NEW__TIME"."Units",
"PRT_NEW__TIME"."Job",
"JOB2"."BP_Emps_Used"
FROM
"{?NEWPRT}" AS "PRT_NEW__TIME"
INNER JOIN "JCM_MASTER__JOB" AS "JOB2"
ON "PRT_NEW__TIME"."Job"="JOB2"."Job"
INNER JOIN "PRM_MASTER__EMPLOYEE" AS "EMPLOYEE2"
ON "PRT_NEW__TIME"."Employee"="EMPLOYEE2"."Employee"
WHERE "JOB2"."BP_Emps_Used" = 1
AND
("PRT_NEW__TIME"."Date" BETWEEN
{?As of Date} - 41 AND {?As of Date})

Hello,
Sorry you'll have to contact Sage on how to do this. We can help you once you get connected but we can't help you get around their connection methods.
There is no Preview Set Database Connection method you can use in CR Designer. The Designer assumes you select it first or use the Set Location option before previewing or refreshing the data.
If you are doing this in the Sage program itself we can't help you, you'll have to contact Sage for assistance.
Sage is an OEM Partner they are responsible for supporting their product and CR. If they have issues help you then they will contact us directly for assistance.
Thank you
Don

Setting the page orientation for a report

Hi
Currently, in infoview I have observed that we can set the page orientation for a report in a webi document , i.e. whether the report is to be viewed in landscape mode or portrait mode.
Currently, in the BO SDK, I have come across the classes like Orientation, but am not able to figure out how to use them.
Can you please paste some code snippet, how to use this class for setting the orientation of the document.
Thanks in advance,
Shruti

Hi Shruti,
To retrieve the Reportcontainer for an existing report on a WebI document, you can do the following:
ReportStructure oReportStructure = oDocumentInstance.getStructure();
ReportContainer oReportContainer = (ReportContainer) oReportStructure.getReportElement(0);
Hope this helps.
Regards,
Dan

Using TVARVC to Dynamically Set the Payroll Period in Standard Reports

Similar Messages

Maybe you are looking for