Using two Actiontec routers with two coax lines

Hello all-
I currently have one Actiontec router with coax plugged in near my TV (best wifi distribution in house) and my PC in my home office using wireless. A while back the router had been installed in my home office, and another coax cable was put in. I currently have two coax cables coming into the house.
What I want to do is purchase another Actiontec router and plug my office's coax cable into it, and use the new router for a wired connection to my PC. Is there an easy way I can do this? Is itt as simple as buying the new router and plugging it in?
Thanks.

It's easy, but not quite as simple as just plugging it in.
Follow the directions here:
Can I get an ethernet connection in a room with only coax?

Similar Messages

Can I use the pdf fax with a DSL line

Can I use the pdf fax with a DSL line and, if so, how do I get the pdf fax modem to appear in my printer options? No Modems appear in my Modem pop-up menu.
Thanks,

Should I be able to fax using the internal fax software if I set it up with the proper settings?
Yes, if it's not a purely Digital line, dial that FAX number on your Phone, does it answer with a screech?
Must I disconnect all my other lines in order to use this?
No, you shouldn't need to... do you have DSL Filters on all lines except the DSL connection, like these...
http://www.twacomm.com/info/DSL_Filters.htm
Oh, it's not clear, do you have 2 actual Lines/Phone numbers, or do they share the same line?

Can I use two ActionTec routers with Verizon FiOS if they have two different revisions?

I want to add a second router to my coax cable and I know about configuring them already. But my main router is Rev. I and the second is Rev. G. Can I still use the second one? If not is there a way around it? My main router has been lower letters before but I've just gotten replacements and now it's at Rev. I. If that matters lol... Thank you.
Solved!
Go to Solution.

You can connect the second Actiontec router via coax. This link explains how to do it:
http://www.dslreports.com/faq/15984
Note that there is less configuring that needs to be done if you use an Actiontec ECB2500C or WCB3000N. Both of those devices are plug-and-play.
WCB3000N can be seen here:
https://teleproducts.verizon.com/fios/index.cfm/eh/DisplayDetails 3rd item from the top
ECB2500C:
http://www.amazon.com/Actiontec-Ethernet-Adapter-Service-ECB2500C/dp/B008C1JC4O

How can I use two VERIZON ACTIONTEC routers with my home internet?

Hi,
I currently have one Verizon Actiontec router (newest model) that is connected as my primary router that handles all the internet stuff and MoCA for the TV's. It is connected via Coaxial cable into the wall on the first floor of my house. My house is 4 floors - Basement - 1st floor - 2nd floor- loft.
Now, I have a second identical Verizon Actiontec router that I want to put into good use but not sure how. I assume the only thing I can accomplish with it is to extend the wireless network, or make it faster, etc. I'm not exactly sure.
My house doesn't have any ethernet wall jacks, only coax. But there is a coax jack in every room on every floor.
I do not want to drill any holes into any walls, or run long cables that go up to other levels.
My experience with this tech is not too advanced (I know how to reset the router, go into the config page, change security, some IP stuff), but my knowledge is not technical enough to understand how to configure this manually without instructions/assistance/guidance.
I hope I have provided enough information, if there is anything else I am missing or you need to know please inform me.
Thank you in advance, and I appreciate any advice.
sherorox
Solved!
Go to Solution.

You can use the extra router to provide ethernet and a Wireless Access Point (WAP) anyplace you have an active coax connection.
http://www.dslreports.com/faq/15984

Using 2 Actiontec routers

I have 2 actiontec MI424-WR routers. The previous tenant in my apartment left his here, and when I signed up for FIOS they shipped me a router with the cable box and such.
My place is small but for some reason the wireless connectivity in my bedroom is pretty bad. Maybe it's the concrete walls, maybe there's a channel conflict, I dunno.
Either way I figure I have the second router, maybe I can just hook it up to the first (wired) and use it as an access point in my bedroom. Is this feasbile? I'm guessing I'd have to disable DHCP somehow.

You are going in the right direction, but if you have a working FiOS TV outlet in that area where you want it, then you should try this method.
[PDF]
Configure MI424WR as a LAN MoCA Bridge - A
Basically you take it to that room, get a two way tv splitter (5-1000mhz) and then hook the wall coax cable into this splitter. The splitter will have two outs. one cable will get connected between the new router, and a 2nd cable will get connected to your set top box.
Use the configuration settings as described.
Then you can plug straight into the router for the best connectivity (always recommended) or use the wireless from that router in that room.

With header line & with out header line ?

what is difference between with header line & without header line ?

When you create an internal table object you can also declare a header line with the same name. You can use the header line as a work area when you process the internal table. The ABAP statements that you use with internal tables have short forms that you can use if your internal table has a header line. These statements automatically assume the header line as an implicit work area. The following table shows the statements that you must use for internal tables without a header line, and the equivalent statements that you can use for internal tables with a header line:
Operations without header line
Operations with header line
Operations for all Table Types
INSERT <wa> INTO TABLE <itab>.
INSERT TABLE ITAB.
COLLECT <wa> INTO <itab>.
COLLECT <itab>.
READ TABLE <itab> ... INTO <wa>.
READ TABLE <itab> ...
MODIFY TABLE <itab> FROM <wa> ...
MODIFY TABLE <itab> ...
MODIFY <itab> FROM <wa> ...WHERE ...
MODIFY <itab> ... WHERE ...
DELETE TABLE <itab> FROM <wa>.
DELETE TABLE <itab>.
LOOP AT ITAB INTO <wa> ...
LOOP AT ITAB ...
Operations for Index Tables
APPEND <wa> TO <itab>.
APPEND <itab>.
INSERT <wa> INTO <itab> ...
INSERT <itab> ...
MODIFY <itab> FROM <wa> ...
MODIFY <itab> ...
Using the header line as a work area means that you can use shorter statements; however, they are not necessarily easier to understand, since you cannot immediately recognize the origin and target of the assignment. Furthermore, the fact that the table and its header line have the same name can cause confusion in operations with entire internal tables. To avoid confusion, you should use internal tables with differently-named work areas.
The following example shows two programs with the same function. One uses a header line, the other does not.
With header line:
TYPES: BEGIN OF LINE,
COL1 TYPE I,
COL2 TYPE I,
END OF LINE.
DATA ITAB TYPE HASHED TABLE OF LINE WITH UNIQUE KEY COL1
WITH HEADER LINE.
DO 4 TIMES.
ITAB-COL1 = SY-INDEX.
ITAB-COL2 = SY-INDEX ** 2.
INSERT TABLE ITAB.
ENDDO.
ITAB-COL1 = 2.
READ TABLE ITAB FROM ITAB.
ITAB-COL2 = 100.
MODIFY TABLE ITAB.
ITAB-COL1 = 4.
DELETE TABLE ITAB.
LOOP AT ITAB.
WRITE: / ITAB-COL1, ITAB-COL2.
ENDLOOP.
Without header line:
TYPES: BEGIN OF LINE,
COL1 TYPE I,
COL2 TYPE I,
END OF LINE.
DATA: ITAB TYPE HASHED TABLE OF LINE WITH UNIQUE KEY COL1,
WA LIKE LINE OF ITAB.
DO 4 TIMES.
WA-COL1 = SY-INDEX.
WA-COL2 = SY-INDEX ** 2.
INSERT WA INTO TABLE ITAB.
ENDDO.
WA-COL1 = 2.
READ TABLE ITAB FROM WA INTO WA.
WA-COL2 = 100.
MODIFY TABLE ITAB FROM WA.
WA-COL1 = 4.
DELETE TABLE ITAB FROM WA.
LOOP AT ITAB INTO WA.
WRITE: / WA-COL1, WA-COL2.
ENDLOOP.
The list, in both cases, appears as follows:
1 1
2 100
3 9
The statements in the program that does not use a header line are easier to understand. As a further measure, you could have a further work area just to specify the key of the internal table, but to which no other values from the table are assigned.
Internal table with header line
you can use anywhere except obkect oriented concept.
Internal table without header line :
You should use in Object oriented concept..
Always try to use without header line,performance point of view it is best..
Example :
Without header line.
Structure
types : begin of ty_itab ,
matnr type mara-matnr,
end of ty_itab.
Internal table
data i_itab type standard table of ty_itab .
Work area
data wa_itab like line of i_itab
With header line
data : begin of i_itab occurs 0,
matnr like mara-matnr,
end of i_itab
itab with header lines are obsolete, anyway it will work but not recommended. instead use work area or more effiecient is field symbols. so donot use itab with header line.
i will explain use of itab w/o header line.
Data: itab1 type standard table of mara with header line occurs 0,
itab2 type standard table of mara,
wa_itab2 type mara.
loop at itab1.
"This will work fine.
endloop.
loop at itab2.
"This will give erro that itabd does not hav workarea
endloop.
"so write
loop at itab2 into wa_itab2.
"This will work
endloop.
The difference between
whih header line and with out heater line of internal table.
ex:-
a) Data : itab like mara occurs 0 with header line.
b) Data: itab like mara occurs 0.
-While adding or retrieving records to / from internal table we have to keep the record temporarily.
-The area where this record is kept is called as work area for the internal table.
-The area must have the same structure as that of internal table. An internal table consists of a body and an optional header line.
-Header line is a implicit work area for the internal table. It depends on how the internal table is declared that the itab will have the header line or not.
a) Data : itab like mara occurs 0 with header line.
table is with header line
b) Data: itab like mara occurs 0.
table is without header line
regards,
srinivas
*reward for useful answers*

CALLING ALL EXPERTS - Connected TWO Actiontec Routers to use one as main and second as GUEST

Hello Experts-
I have TWO Actiontec Routers from Fios. I bought the new N one, and I have an old Actiotec that I was previously not using. So here is what I am trying to do...
I'd like to leave Router 1 (the New N router) as my primary router (comes from ONT via cat5 wire NOT Coax) and Set-up the second router off the first to be a guest router. So essentially make it a bridge.
I can't seem to configure it to work correctly.
Can anyone out there give me a step-by-step walkthru on how to configure this second router so I can have them both hooked up, seperate SSID, with one as the Main and the other being the Guest?
THANK YOU IN ADVANCE!
Rob
Solved!
Go to Solution.

I'm basically wondering how to change the routers IP address and where the Disable DHCP is within the menus.
THANKS IN ADVANCE!
Rob
To change the IP address of the Local Area network choose:
My Network
Network Connections
Click edit on the row for "Network (Home/)office"
On the next screen click Settings
On the next screen you can change the LAN (192.168.1.1) address to something different.
On the same screen you can disable DHCP too.
I hope this helps.

Linking devices that use seperate routers with 2 seperate dsl lines.

Basically at home i have a setup like this using two different dsl lines.
DSL-Line1 > Wireless Router/Modem1 > laptops/games consoles using it.
DSL-Line2 > Wired Router/Modem > wired pc's/file server.
Basically i'm wondering if i replace the wired router/modem with something like a wag320n is there a way to link the two wireless networks together so the games consoles/laptops can get access to the pc's/file servers, but have them still using the seperate dsl lines?,
ie being able to see each other but still using dsl-line1 internet access for the games consoles etc, and the pc/fileservers using dsl line 2.
Thanks

You can connect both routers with an ethernet cable. Example setup:
Wireless router: LAN IP 192.168.1.1/255.255.255.0. DHCP server enabled for 192.168.1.100-149.
Wired router: LAN IP 192.168.1.2/255.255.255.0. DHCP server disabled.
Everything which is supposed to go through the wired router must have a static IP address configured on the device itself. You configure an IP address, e.g. 192.168.1.200, subnet mask 255.255.255.0, gateway 192.168.1.2 and dns 192.168.1.2. Now that computer will use the wired router as internet gateway.
All devices which still use DHCP to obtain an IP address will connect through the wireless router to the internet.
Inside your LAN you have full connectivity.

How to use Two main windows with in a page in script ?

Hi any body explain me...
How to use Two main windows with in a page in script ?
with header data in one main window,
& Item data in other main window.

HI..,
u need to go for SPLITTING THE MAIN WINDOW !!!
Main windows in page windows allow you to format text in multiple columns. Define an area in the page window, in which to position the main windows.
Here is the procedure !!
-->Create a page window and assign it to a page.
Choose Edit --> Main windows.
A dialog box appears.
-->Enter values in the fields Area width and Area height in accordance with the input guidelines for main windows.
-->Enter values in the fields Spacing and Number in the Horizontal group if you want to use multiple columns. You can ignore the fields in the Vertical group.
Determine how many columns and line areas are required for label printing. Then enter the corresponding values in the fields in the Horizontal and Vertical groups.
-->The value in the field Left margin varies from main window to main window if multiple columns are used. The following applies:

Left margin of current column + Window width + Horizontal spacing = Left margin of next column
In label printing, the field Upper margin also varies from main window to main window:

Upper margin of current main window + Window height + Vertical spacing = Upper margin of next main window
-->Enter a value in the field Start position.
This is a counter. Enter a starting value which is equal to or greater than 1.
-->The main windows are added to the list.
-->Save your form.
reward if it helps u...
sai ramesh

PO with account assignment category K and use two cost center

Dear Experts
When I create a PO with account assignment category K and use two cost center in the account assigment tab of PO with the same GL or with different GL in the both line item, The FI document does not get posted.
Any input on this please.
Regards
Paul

Hi,
Check in the PO document - Item level - Delivery tab
There are two indicators
1. Good receipt
2. GR non-valuated.
If you are giving only one cost centre, only GR check box active and GR non-valuated check box is in-active. That's why System creating FI document during GR.
If you are giving two cost centres, Both GR check box and GR non-valuated check box are active. That's why System is not creating any FI documents during GR.
Regards
Ravi

Network security - using two wireless WRT54G Routers

I have lots of ports on my router open for numerous family software applications that are all on one computer and I would like to isolate these risky activities from the rest of my network.
I recently read I could use two routers, plug one router into another, assign each a different starting IP address (such as 192.168.1.1 and 192.168.2.1). Then attach my at-risk PCs--to the router that's directly connected to my broadband modem, and all other computers to the second router.
Internet traffic to and from the unsafe PC area would then not reach my secure subnetwork at all.
I currently use a WRT54G V5...does buying a second one and using it as described make sense? It sounds like a rather inexpensive way to add security to my network.
I assume the second router gets connected from it's internet jack to one of the port jacks on the first router? Is there anything else that would need to be changed or set in either router to make this work?
Can I please ask if u respond to try and keep your response at a level that a non expert could understand.....I would really appreciate it!
Thanks for everyones advice!

Thanks for the quick response....it is disappointing to see that I would lose the ability to share files......I assume this is also true for printers as well??? Do you have another solution that you think would do a better job?
Anyway I did get a rather detailed response on how to make it work and it's in a fashion that even I could understand.
I thought I would share it in case anyone else had a interest to isolate a computer.
Thanks
With regards to your concern, the setup that you suggested does address your concern. With this setup, we are somehow creating two networks on your location. In this manner, the computer that needs the set of ports will not be part of the network of the second router thus, it will not be able to affect the other computers.
With this type of setup, we will just have to leave the current settings of the WRT54G v5 (as long as its working properly this time). All we have to configure is the second router wherein we will have to change its LAN IP Address and also, configure its wireless settings in order for the said router to provide wired and wireless connection to all computers connecting to it. Please allow me to give you the steps.
Once we have the second router available, please connect one of the computers straight to the second router using one of the four ports (Ethernet port). With the configuration, only the second router and the computer will be connected with each other.
Before setting up the second router, I suggest that we do a hard reset on the router to make sure that it is on default settings and that we have a stable connection during the setup.
Here’s how to do a reset:
1. Locate the reset button of the router at the back panel.
2. Hold the reset button for 30 seconds using a pen or a paper clip.
3. Release the reset button.
Configuring the Second Router:
1. Go to your desktop and double click on Internet Explorer (Located on the Start Menu in Windows XP).
2. When "Internet Explorer" opens type 192.168.1.1 into the "Address" bar and click on Go.
3. The "Enter Network Password" window will appear.
4. Skip user name and type admin (admin is the default password) as the password, and click OK.
5. Go to Wireless Tab.
6. Change SSID (e.g. Vic or your name or last name).
7. Change channel to 11.
8. Hit save Settings.
9. Click on the sub tab Wireless Security.
10. Set the Security Mode to WEP.
Using pass phrase Encryption Level 40/64bit (10 hex digits):
1. Type a pass phrase.
2. Click Generate.
3. Copy key1 on a piece of paper (10hex character).
4. Hit Save Settings.
For using manual key entry Encryption Level 40/64bit (10 hex digits)
1. Under Key 1 type a 10 digit character from A-F and 0-9 (e.g.: A0B3F58C9E, 0123456789, ABCDEFABCD).
2. Hit Save Settings.
3. Click on the Setup Tab.
4. Change the Local IP Address to "192.168.2.1".
5. Click “Save Settings”.
Finishing the Connection:
1. Shut down all computers.
2. Unplug the power from the back of both routers.
3. Unplug the power from the modem.
4. Wait for 30 second.
5. Connect the WRT54G v5 router (using its Internet Port) to the Cable Modem.
6. Connect the WRT54G v5 (using one of the four Ethernet ports) to the second router (using its Internet/WAN port).
7. Power up the modem.
8. Wait for the lights to stop blinking.
9. Power up the routers.
10. Start up your computer.

Query with two registers, when i use two taxcode

Hi everybody, my question in this opportunity, it's about this query:
/*LIBRO DE COMPRAS CELULAR STRA S.A. DE C.V.*/
SELECT T0.[TaxDate] Fecha,
 T0.[NumAtCard] 'DOCUMENTO',
 T1.[U_RegIva] 'NRC',
 T0.[CardCode] 'CODIGO DE PROVEEDOR',
 T1.[U_NIT] 'NIT',
 T0.[CardName] 'NOMBRE DE PROVEEDOR',
 SUM(CASE
 WHEN T2.[TaxCode] = 'IVAEXE' THEN T2.[LineTotal]
 ELSE 0
 END) 'LOCALES EXENTAS',
 0.00 ImportacionesExentas,
 (SELECT sum(T12.[LineTotal]) FROM PCH1 T12 INNER JOIN OPCH T10 ON T12.[DOCENTRY] = T10.[DOCENTRY] WHERE T12.[AcctCode] != '11209' AND T12. [TaxCode] = 'IVACCF' AND T12.[DOCENTRY] = T0.[DOCENTRY] AND T10.[TaxDate] >= '[%0]' and T10.[TaxDate] <= '[%1]') 'LOCALES GRAVADAS',
 0.00 Importaciones,
 T0.[VatSumSy] 'CREDITO FISCAL',
 T0.[DocTotal]+
T0.[DocTotal] -(CASE
 WHEN T2.[ACCTCODE] = '11209'
 THEN ((SELECT (T12.[LineTotal]*-1)
 FOM PCH1 T12
 INNER JOIN OPCH T10 ON T12.[DOCENTRY] = T10.[DOCENTRY]
 WHERE T12.[AcctCode] = '11209' AND
 ---T12.[TaxCode] = 'IVACCF' AND
 (T12.[DOCENTRY] = T0.[DOCENTRY]) AND
 T10.[TaxDate] >= '[%0]' and T10.[TaxDate] <= '[%1]'))
 ELSE T0.[DOCTOTAL] END) 'TOTAL COMPRAS', --This statement, cause the error, or, think so i
 (SELECT SUM(T13.[WTAMNT]) FROM PCH5 T13 WHERE (T13.[WTCode] = 'RET1' OR T13.[WTCode] = 'RET2') AND T13.[ABSENTRY] = T0.[DOCENTRY] )'RETENCION IVA',
 0.00 ComprasExcluidos
FROM OPCH T0
 INNER JOIN OCRD T1 ON T0.[CardCode] = T1.[CardCode] INNER JOIN PCH1 T2 ON T0.[DocEntry] = T2.[DocEntry]
WHERE T0.[TaxDate] >= '[%0]' and T0.[TaxDate] <= '[%1]' AND T1.[Country] = 'SV' AND T0.[Series] = 7 and
 t0.docnum not in (SELECT distinct T0.[DocNum] FROM [dbo].[OPCH] T0 INNER JOIN [dbo].[PCH1] T1 ON T0.DocEntry = T1.DocEntry
 inner join RPC1 T2 on t1.trgetEntry=t2.docentry INNER JOIN ORPC T3 ON T2.DocEntry = T3.DocEntry
 WHERE T3.[TaxDate] >= '[%0]' and T3.[TaxDate] <= '[%1]' and t3.series=9) AND
 T0.NumAtCard NOT LIKE '%F%' AND
 T0.NumAtCard NOT LIKE '%REDIGIT%'
GROUP BY T0.[TaxDate],
 T0.[DocNum],
 T0.[CardName],
 T0.[CardCode],
 T1.[U_NIT],
 T0.[VatSumSy],
 T0.[DOCENTRY],
 T0.[DocDate],
 T0.[DOCTOTAL],
 T0.[NumAtCard],
 T1.[U_RegIva],
 T2.[AcctCode],
 T0.[DocTotal]
the result shows two line with the information of one vendor invoice,
example:
numatcard cardcode tax exempt local shopping tax total
12345 0125 0.00 100 13 115
12345 0125 2.00 100 13 115
i think this be must to tax indicator, because in the document i use two diferent taxcode. i need help to avoid this error, if somebody know how resolved, me will great util

Well Gordon,
If you see in the statement, the register is in one line:
(SELECT sum(T12.[LineTotal]) FROM PCH1 T12 INNER JOIN OPCH T10 ON T12.[DOCENTRY] = T10.[DOCENTRY] WHERE T12.[AcctCode] != '11209' AND T12. [TaxCode] = 'IVACCF' AND T12.[DOCENTRY] = T0.[DOCENTRY] AND T10.[TaxDate] >= '[%0]' and T10.[TaxDate] <= '[%1]')
to better expalin.
i have this line without tax, i only need a statement in the that be sum, the line of tax exempt + line without tax + tax total.
if you see in the query, i've excluded the acctcode = '11209', really without this filter, only i need select the doctotal to view the result. but if, i do a statement where only excluide the document line where appear this account, the quey returns a wrong

Using two scan progressive cameras with 1409?

I need to use two scan progressive cameras with the 1409. The two cameras are two sony XC-55 (30Hz). I have configured one as a Master and the other as Slave. I have connected the HD and VD of each camera between them.
I acquire a sequence of frames (normally I take five)of each camera every time that a triggeg ocurrs. Time to time I get some frames in the slave camera that the first line of the frame is not at the top. Not always in the same position. Sometimes I don't received the last or the two last frames.
In the past I used the same configuration with the 1408 and 1408 always tooks correctly all the frames from the two cameras.
Please, help me?
Thanks, in advance

I think the board isn't reading correctly the frames. I have some systems installed with the 1408 and they work correctly. I will send you some frames which show the problem and the vi that I use to capture them. The .icd file that I use with the 1409 is 30 Hz progressive and the .icd file that I use with the 1408 is scan area.
It is possible that I can solve the problem changing the parameters of the icd file? Do you have information about them?
Attachments:
frames.zip ‏167 KB
vi.zip ‏25 KB

How do I use two external monitors with my laptop?

I have a new Pavilion dm4-301 d cl Entertainment PC. My OS is Windows 7. I am used to using two external monitors with a docking station. This new laptop does not have a docking station. What do I need to get to use two external monitors?
This question was solved.
View Solution.

Certainly not without a dock but even with, HP laptop docks pretty well limit you to one of the external monitor ports, even if there are two on the dock. We have used a device called an Atlona AT-HDPIX2 which is a usb to hdmi adapter. It provides a third monitor capability for a laptop....use the native external monitor port and the internal laptop display and then this device gives a third monitor which is full configurable from the Windows 7 display interface...clone, extend, etc. It allows full HD resolution and is responsive enough for even light gaming. HP makes no true docking station for your laptop.

Hi, does someone know if I can use two Apple tv's with the same iTunes library? Thanks

Hi, does someone know if I can use two Apple tv's with the same iTunes library?
Thanks

Yes you can use two (or more) AppleTVs with one iTunes library. They can both stream from iTunes (or the internet) at the same time, as long as you have a good working LAN and internet connection.

Using two Actiontec routers with two coax lines

Similar Messages

Maybe you are looking for