Using xsb files with xmlbeans ant task

Hi all
I have got an xsd which references other schemas: for these other schemas I have only the xsbs. The xmlbeans ant task refuse to load the xsd I'm giving in because cannot found the other schemas. I'd like to simply import the existing xsb so that the ant task can use them: does anyone know how to do it?
Thank you in advance for any help
cdr

Actually it doesn't work properly in SQL Server 2008 R2. I have a similar EP task. If I set the working directory to \\server\share\subdir the task fails. However, if I map a drive latter to the \\server\share and set working directory to <drive>:\subdir
it works

Similar Messages

Using ditaval files with XML Author

I've been evaluating XML Author and am trying to determine how to use ditaval files with it. If I want to save a ditamap as a book for PDF creation, the Prompt for DitaVal File check box is greyed out. Does anyone know why this might be the case? Is the use of ditavals limited to a full implementation of FrameMaker?
I tried adding PromptForDitaval=1 to the [General] section of the ditafm.ini file to no avail.

Make sure you are using the latest hotfix for Director (11.5.8) - it is the first to support AS# in Flash. Your SWF members will probably need to be linked to their external files instead of fully imported.
Or perhaps you're saying that you've met both these conditions and are still seeing problems?

Using *.so files with eclipse

Hey there
I'm having a little problem compiling an application which uses *.so files with eclipse:
If I run eclipse from the directory in which the *.so files are present, the application will run.
However, if I run eclipse from any other directory , the applicationwon't run, stating that the *.so were not found.
I've placed the path to the directory on my $PATH , and tried to add the following line to the VM variables in the RUN menu:
-Djava.class.path=<directory _name>
but to no avail..
Any ideas?
Thank You!
Message was edited by:
Yossale

I added it to the LD path, but nothing changed.
How can I check if eclispe picked up the change?First check that you can now run your program from any directory and then worry about Eclipse.
Where did you setup the LD_LIBRARY_PATH?

Using Word files with audio on a PC

I was wondering if it were possible for one to use Word files with recorded audio from a Mac on a PC? I'm not sure if it is possible at all, but if somebody knows how to extract the audio, it would be a great help. I used Word 2008 for the Word files.
Thanks

If you don't get an answer here, try the forums devoted entirely to the problems of MS apps:
http://answers.microsoft.com/en-us/mac/forum/macword

How to use .keystore file with BEAweb 6?? Help

Hi,
Is there a way to use .keystore file with BEA Weblogic 6 or 6.1 ?
I used keytool to create private key and public key..
I do not know how to tell weblogic 6 to use it....
Can this be done through the GUI or do I have to add something to the .xml
config file for the site?
Thanks,
Rob

"Bobby Digi" <[email protected]> wrote:
Hi,
Is there a way to use .keystore file with BEA Weblogic 6 or 6.1 ?
I used keytool to create private key and public key..
I do not know how to tell weblogic 6 to use it....
Can this be done through the GUI or do I have to add something to the.xml
config file for the site?
Thanks,
Rob
nope. with 7.0 you can do that.
>
>

How to use XDCAM files with Premier 4 Trial

According to everything I have read, using XDCAM files with Premier 4 is easy. It just works. However, it doesn't with me.
For starters, when I create a new project, there are no XDCAM presets, despite it stating there are in the various documents I have read.
If I either try to import a file directly or copy it to the hard drive and then import it, I get:
Error Message
The importer reported a generic error
Not very helpful.
This is a trial version of Premier to try to establish if this product is any good. I did try to contact Adobe but they say they don't support trial users. Not very helpful. Since Adobe are obviously not very interested in selling their products, is there anyone else out there whop can answer this or should I just use Final Cut Pro instead (well if Adobe are not interested in helping a potential customer, what chance is there of being helpful once they have your money???)

As far as I am concerned, editing XDCAM EX files with CS4 - I have yet to edit XDCAM (HD) files - is as easy as editing DV(CAM) material on my i7 Extreme machine with Vista Ultimate and 12 Gig of RAM.
I am also pleased to report that the audio bug that beset CS3 when editing XDCAM EX files namely, audio cutting out randomly, is a thing of the past.
The whole CS4 Suite (including Premiere) has been running very smoothly on my (beefy) machine.

"Use RAW files with external editor" greyed out for Photoshop CS2?

I've just upgraded from iPhoto 5, and the "Use RAW files with external editor" option in the advanced preferences is greyed out when I select Photoshop CS2 as my external editor (back in the General pane).
It works fine when Preview.app is selected. I can understand that pre-CS2 Photoshop wouldn't be available, but CS2 is capable of editing RAW images.
Has anyone been able to get iPhoto 6 to send a RAW image to Photoshop CS2 using this preference? I've written an Applescript to do it in iPhoto 5, but I'd rather use something cleaner...
15" PowerBook G4 Mac OS X (10.4.4)

Works great with Photoshop Elements, opens with Camera Raw. The issue is you can't save it so that iPhoto gets the changes.
You have to save it and then re-import. I tried all permutations of saving it in originals and modified folders in the library. No luck. The only thing I didn't try is to save it as a jpeg over the top of the full sized one iPhoto created on import.

How to use "choose file with prompt" command?

I need to use "choose file with prompt" command and I want give user possibility choose ONLY images (jpeg, png, gif). So, I write like this:
choose file with prompt "Please, choose images for processing..." of type {"JPEG Image"}
But this doesn't work! - All files (including jpegs) are dimmed, and user can't choose any....
So, how can I filter JPEGs, PNGs and GIFs?

I have found, that most of images on my computer has missing file_type, I don't know why..... so "type identifier of (info for (choose file))" also doesn't work properly.
The only one way that 100% works is use Uniform Type Identifier (UTI) -- details here: http://www.huw.id.au/code/fileTypeIDs.html
thanks.
iMac G3, PowerBook G3 FW Mac OS X (10.4.5)

Is anybody use Hyper File with LabView?

Is anybody use Hyper File with LabView?
I Have a project that need to conect to a hyper file data base Made by PCsoft.
Thanks
Benoit Séguin
Software Designer

I have never used HyperFile, but a quick check of the company's website indicated that there are ODBC drivers available for it so it should be a simple matter connecting through ADO.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Help With MXMLC Ant task

Hello all. I've been using the MXMLC servlet compiler that
comes with the fds-tomcat tutorial. I have recently tried to
compile with MXMLC using the ant task. The application compiles the
swf correctly except it cant seem to find the spring services I had
configured.
[MessagingError message='Unknown destination 'xxxxx'.']
Now, when I go and try to get the servlet to compile it; ie:
Bringing up the MXML file from the web browser, it works fine. Can
Anybody identify what i'm doing wrong?

Hey
After scratching my head for couple hours and wrestling with
the FDS configuration I have managed to get the application going.
Here is my ant target
<taskdef resource="flexTasks.tasks"
classpath="${file.flexTasks.jar}" />
<mxmlc file="${flex.main.file}"
keep-generated-actionscript="true"
use-network="true" output="${flex.output.file}"
as3="true" es="false"
benchmark="true" debug="true"
optimize="true" services="${file.flex.services.conf}"
context-root="/analytics" strict="true" >

<compiler.library-path dir="${flex.user.classes.dir}"
append="true">
<include name="Cairngorm.swc" />
<include name="CairngormEnterprise.swc" />
</compiler.library-path>

<compiler.source-path
path-element="${flex.actionscript.output.dir}"/>
</mxmlc>

Using variables in WLST Script ant task

I have multiple scipts that are run using ant tasks, however, I do not want to have to enter the password every time one of these scripts is executed. Instead I would like to use the following ant task to store the password in a variable/property:
<target name="getPassword" >
     <echo message="Domain: ${domain}" />
<echo message="Username: system" />
<input message="Please enter password:" addproperty="password" />
</target>
I would then like to use that variable/property everytime a script is executed like this:
     <target name="deploy4x">
          <echo message="***** Copying 4X.ear *****" />
          <copy file="${build.path}\jar\4X.ear" todir="${apps.dir}" preservelastmodified="true"/>
          <echo message="***** Updating 4X.ear on ${domain} *****"/>
          <wlst debug="true" fileName="Deploy4X.py" executeScriptBeforeFile="true" failonerror="true" >
               <script>
                    connect('system','%s' % ${password},'%s' % $url)
               </script>
          </wlst>
     </target>
However, the script blows up every time I try to run it b/c of the connect() line. I have also tried connect('system','%s' % password, '%s' % url).
Has anyone else successfully used variables in an Ant WLST Script task?
Thanks.

Hi,
when I use *XDIM_MEMBERSET ACCOUNT AS %TEST% = BAS(REVENUE) - it work fine.
BUT ! after my first commit, it seems like the variable value is lost. And the *Xdim_memberset takes all.....
Fortunately enough, *select still contains the variable value after *commit.
Thanks,
Joergen
*Correction !
It actually works, it still contains the variable value after commit !!
Edited by: Jørgen Dalby Andersen on Dec 30, 2011 1:33 PM

How to include assigned .as files in MXMLC ant task ?

When i use mxmlc ant task, i found that
the tag <include-sources/> doesn't support !
( described by http://help.adobe.com/en_US/flex/using/WS2db454920e96a9e51e63e3d11c0bf69084-7a63.html )
neither SDK version 3.x nor 4.x
Are they lying?!
How to include assigned .as files ?
Thank you !

My understanding is that mxmlc will use all available resources in the source path, as needed. Instead of giving it individual resources to include, you simply need to give it the source-path that contains those resources. This is different from a library project, which may need to include individual classes that are never used in that library.

Problems with wlserver ant task for WL 8.1

hi
i have a problem with using wlserver ant task for Weblogic 8.1
basically i want to start the server that is already preconfigured and deploy
one ear.
here's what i do:
<taskdef name="wlserver" classname="weblogic.ant.taskdefs.management.WLServer">
<classpath refid="lib.classpath"/>
</taskdef>
<wlserver action="start" dir="D:/BEA/user_projects/domains/mydomain"
output="wls81.log"/>
(and then the deployment task - irrelevant here)
the classpath is generated automatically and includes all jars in the specific
project directory:
     <path id="lib.classpath">
     <fileset dir="${proj.lib.dir}">
          <include name="**/*.jar"/>
     </fileset>
     </path>
(weblogic.jar is there as well)
the problem is when i run it, the following happens:
- if i have action="start" (or no action attribute at all), i get the following
exception:
java.lang.NullPointerException
at weblogic.Home.<init>(Home.java:29)
at weblogic.Home.getInstance(Home.java:86)
at weblogic.Home.getPath(Home.java:94)
at weblogic.Home.getFile(Home.java:99)
at weblogic.ant.taskdefs.management.WLServer.execute(WLServer.java:260)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:193)
at org.apache.tools.ant.Task.perform(Task.java:341)
at org.apache.tools.ant.Target.execute(Target.java:309)
at org.apache.tools.ant.Target.performTasks(Target.java:336)
at org.apache.tools.ant.Project.executeTarget(Project.java:1339)
at org.apache.tools.ant.Project.executeTargets(Project.java:1255)
at org.apache.tools.ant.Main.runBuild(Main.java:609)
at org.apache.tools.ant.Main.start(Main.java:196)
at org.apache.tools.ant.Main.main(Main.java:235)
- if i change it to action="startup" as specified on "wlserver Ant Task Reference"
it seems that this task is skipped completely. no error messages, no stack trace,
nothing. i tried -verbose and -debug options on ant, but there're no logs displayed
whatsoever. it takes less than a second to run this task so i presume it's just
getting skipped completely.
i run this from the standalone Ant 1.5.4 on Windows environment.
i've followed the topic "wlserver Ant task for WebLogic 8.1" where kind of similar
problem is described but putting weblogic.jar on the system CLASSPATH is not an
option for this project.
anyone has any idea about how to get this going?
cheers
Andrei

sounds bug to me. NPE should be correctly handled with appropriate error
message. Please contact BEA support to log the call.
"Andrei Rusakou" <[email protected]> wrote in message
news:[email protected]...
>
hi
i have a problem with using wlserver ant task for Weblogic 8.1
basically i want to start the server that is already preconfigured anddeploy
one ear.
here's what i do:
<taskdef name="wlserver"classname="weblogic.ant.taskdefs.management.WLServer">
<classpath refid="lib.classpath"/>
</taskdef>
<wlserver action="start" dir="D:/BEA/user_projects/domains/mydomain"
output="wls81.log"/>
(and then the deployment task - irrelevant here)
the classpath is generated automatically and includes all jars in thespecific
project directory:
<path id="lib.classpath">
<fileset dir="${proj.lib.dir}">
<include name="**/*.jar"/>
</fileset>
</path>
(weblogic.jar is there as well)
the problem is when i run it, the following happens:
- if i have action="start" (or no action attribute at all), i get thefollowing
exception:
java.lang.NullPointerException
at weblogic.Home.<init>(Home.java:29)
at weblogic.Home.getInstance(Home.java:86)
at weblogic.Home.getPath(Home.java:94)
at weblogic.Home.getFile(Home.java:99)
atweblogic.ant.taskdefs.management.WLServer.execute(WLServer.java:260)
atorg.apache.tools.ant.UnknownElement.execute(UnknownElement.java:193)
at org.apache.tools.ant.Task.perform(Task.java:341)
at org.apache.tools.ant.Target.execute(Target.java:309)
at org.apache.tools.ant.Target.performTasks(Target.java:336)
at org.apache.tools.ant.Project.executeTarget(Project.java:1339)
at org.apache.tools.ant.Project.executeTargets(Project.java:1255)
at org.apache.tools.ant.Main.runBuild(Main.java:609)
at org.apache.tools.ant.Main.start(Main.java:196)
at org.apache.tools.ant.Main.main(Main.java:235)
- if i change it to action="startup" as specified on "wlserver Ant TaskReference"
it seems that this task is skipped completely. no error messages, no stacktrace,
nothing. i tried -verbose and -debug options on ant, but there're no logsdisplayed
whatsoever. it takes less than a second to run this task so i presume it'sjust
getting skipped completely.
i run this from the standalone Ant 1.5.4 on Windows environment.
i've followed the topic "wlserver Ant task for WebLogic 8.1" where kind ofsimilar
problem is described but putting weblogic.jar on the system CLASSPATH isnot an
option for this project.
anyone has any idea about how to get this going?
cheers
Andrei

Xmlbeans ant task help

I'm trying to integrate the ant task to my existing build file in my project.
However the ant task don't have any way to compile more than one .xsd in a different .jar
(i.e.: destdir attr is not supported).
For example, I have two schemas : mySchema.xsd and anotherSchema.xsd
What I need is to generate two different .jars : mySchema.jar and anotherSchema.jar
(The jar names must match with the xsd names, that's how our structure goes).
I don't know if it is possible, or if It would be better to compile everything inside a single .jar
Any suggestions will be much appreciated !!!
Thanks !!

Ah, I found it: the documentation has an error and I copied the supplied example.
http://help.eclipse.org/mars/index.jsp?topic=%2Forg.eclipse.mylyn.wikitext.help.ui%2Fhelp%2FMylyn+WikiText+User+Guide.html says that one has to declare
<taskdef classpathref="wikitext.classpath" resource="org/eclipse/mylyn/wikitext/core/ant/tasks.properties"/>
but should be
<taskdef classpathref="wikitext.tasks.classpath" resource="org/eclipse/mylyn/internal/wikitext/mediawiki/core/tasks/tasks.properties" />
Filed https://bugs.eclipse.org/bugs/show_bug.cgi?id=471965
regards,
Vlad

How to use parameter file with java

Is it possible to use a parameter file with Java, and is there any class/method to make it easy to call and use these parameter from a text file, other than scanning the whole text file manually as we can do normally with visual basic/c++, so we can call the program with the parameter file, like java testing c:\\testing.ini

If I understand you correctly, you may be looking for a properties file. This is basically a text file that contains pairs of strings in the form:
parameter1=value1
parameter2=value2
parameter3=value3
...etc.
and the values are retrieved using the java.util.Properties class - see:
http://java.sun.com/j2se/1.3/docs/api/java/util/Properties.html
Sample use://Call chis method once, to load the props file.
//props file is called "demo.properties", and is
//in a directory that is included in the classpath
    private void loadMyProperties() throws Exception
     InputStream stream = getResourceAsStream("/demo.properties");
     if(stream == null)
         throw new Exception("stream is null!");
     demoProperties = new Properties();
     demoProperties.load(stream);
     stream.close();
// Then you can retrieve properties in your code using:
String param3 = demoProperties.getProperty("parameter3");
//...etc

Using xsb files with xmlbeans ant task

Similar Messages

Maybe you are looking for