USMM Hardware key issue

Hi,
Environment: OS:HP-UNIX , ECC6., Oracle DB
i have applied sap license in 000 with sap* user id successfully. And everything is working fine except one thing.
That is when i go to transaction USMM the hardware key is wrong it shows A0000000. And hardware key is correct in slicense and at service market place.
Please let me know what i can do.
I have also applied license from OS level and still issue is persisting. SAP restart is also not resolving the issue.
Gracias in advance..
Sammy..

Thx Juan...for the solution..that too in such a short time...
tread is marked as answered...
sap_shobhit...thanks for the reply...appreciate ur help...

Similar Messages

SAP B 1 8.8.1 PL5 Hardware key issue

Hi All,
As I recently installed SAP B1 8.8.1 PL5 successfully,
We open 'service manager' -> License Manager -> Settings -> Entered Server name
Issues are :
1.No Harware key was displayed below.
2.While clicking on 'Set' button, some message was thrown like : port number is set, you need to install this also on server...
After that we uninstalled the server tools and again tried to install it but system is not allowing to install ST now.
What to do now............What can be the reasons
Please reply if anyone knows the solution.
Thanks and Regards,
Surabhi

Hi Surabhi,
What is the OS you installed. Is it PL0 or PL5 as your subject?
You may check this: cann't see hardware key
Thanks,
Gordon

Hardware key issue

Hi ,
i have install IDES server ( Licesce installed ). Now my server is courrpted
can i use the same licence key for the same hardware . wheni will install the server again .or do i have get it registered again with SAP
its urgent

Hi Sachin,
yes...if you are installing on the same hardware under same SAP System name (SID) and same software component, you can use the same License key.
Cheers !!
Satya.
PS: points always encourage me to reply ...

Active Hardware Key is missing in ECC 6.0

Hi All,
I have an issues with my ECC 6.0 system. Once I restart my application server due to hardware maintenance. Since that time, I can't logon to my ECC 6.0 except in client 001 with user SAP*. I found in transaction SLICENSE that my active hardware key is missing...
Could anyone help me with this problem ??
Rewards points will be give to you who could solve this problem.
Thank you..

Dear,
Do you have a license installed ? (check the slicense status)
You may request a new license in SAP Service Marketplace at http://service.sap.com/licensekey
Please note that as of Web Application Server ABAP 7.0 the license keys are digitally encrypted. Therefore you must request a new license key for your existing or new system if you are using a SAP product based on Web AS 7.0. Request your digital encrypted license key with license type standard and install it as described in SAP note 870871.
I hope this helps,
Lucio Rodrigues

Error in license check - Error getting the hardware key

Hello,
I'm trying to run SAP NetWeaver 7.0 - Java and ABAP Trial Version on Linux - VMware Edition
but I still have a issue to log on, message : "error in license check"
I try everything I found in forums, I have tested the license, see the trace below.
I checked too files dev_w*
It seems there is a problem with server message
I checked in "dev_ms" file, but nothing has been wrote inside.
Please could you help ? maybe someone met the same issue and solved it.
Thanks
trc file: "dev_slic", trc level: 2, release: "700"
Test license for SAP SYSTEM: N4S
rdisp/mshost: n4shost
rdisp/msserv: sapmsN4S
MsIAttachEx: connect to n4shost / sapmsN4S
NiIInit: allocated nitab (2048 at 0xb72fa008)
NiHsLInit: alloc host/serv bufs (100/100 entries)
NiHsLGetNodeAddr: got hostname 'n4shost' from operation system
NiIGetNodeAddr: hostname 'n4shost' = addr 192.168.155.1
NiHsLGetServNo: got service name 'sapmsN4S' from operation system
NiIGetServNo: servicename 'sapmsN4S' = port 0E.11/3601
NiICreateHandle: hdl 0 state NI_INITIAL
NiIInitSocket: set default settings for new hdl 0 / sock 4 (I4; ST)
NiIBlockMode: set blockmode for hdl 0 FALSE
NiITraceByteOrder: CPU byte order: little endian, reverse network, low val .. high val
NiHsLGetServName: found port number 0E.11/3601 in cache
NiIGetServName: port 0E.11/3601 = servicename 'sapmsN4S'
***LOG Q0I=> NiPConnect2: connect (111: Connection refused) [nixxi.cpp 2769]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 4
"dev_slic" [noeol] 26L, 1378C 1,0-1 Top
dev_w8
M Wed Oct 19 11:46:48 2011
M ***LOG Q16=> ThGetMsHwId, DpMBufHwIdGet (HWID_PENDING) [thxxmbuf.c 512]
M *** ERROR => SlicLikeyGetHardwareKey: no hwid from MSG server: -1 [sliclikey.c 1250]
M *** ERROR => wlikey_check_webas: Error getting the hardware key. You might find some information in file "dev_ms" on the message server. [sliclikey.c 1269]
M ***LOG Q16=> ThGetMsHwId, DpMBufHwIdGet (HWID_PENDING) [thxxmbuf.c 512]
M *** ERROR => SlicKCheckLicense: did not get hwid from message server [slicch.c 306]
M *** ERROR => no hwid from msg-server received [likeyapi_w.c 2257]
M ***LOG Q16=> ThGetMsHwId, DpMBufHwIdGet (HWID_PENDING) [thxxmbuf.c 512]
M *** ERROR => SlicLikeyGetHardwareKey: no hwid from MSG server: -1 [sliclikey.c 1250]
M *** ERROR => wlikey_check_webas: Error getting the hardware key. You might find some information in file "dev_ms" on the message server. [sliclikey.c 1269]
M *** ERROR => ThCheckReqInfo: message send/receive failed [thxxhead.c 17124]
M
M Modeinfo for User T8/M0
M
M tm state = 2
M uid = 9
M term type = 0x2
M display = 0x0
M cpic_no = 0
M cpic_idx = -1
M usr = >SAPSYS <
M terminal = > <
M client = >000<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M its_plugin = NO
M allowCreateMode = YES
M blockSoftCanel = NO
M session_id = >4E9DB1D2B02B3BF6E1000000C0A89B01<
M ext_session_id = >4E9DB1D2B02B3BF6E1000000C0A89B01<
M imode = 2
M mode state = 0x42
M mode clean_state = 1
M task_type = ZTTABTC
M lastThFc = THFCBTC
M lastAction = TH_IACT_NO_ACTION
M th_errno = 0
M rollout_reason = 0
M last_rollout_level = 7
M async_receives = 0
M cpic_receive = 0
M em handle = 2
M roll state = 2
M abap state = 2
M em state = 3
M eg state = 1
M spa state = 3
M enq state = 0
M softcancel = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = 255
M debug_mode = 0
M mode type = 0x1
M debug = 0
M msg_count = 31
M tcode = > <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = 0xa665a3b0
M plugin_info = NULL
M act_plugin_hdl = -1
M act_plugin_no = 0
M max_plugin_no = 0
M async_receives = 0
M vm = no VM
M
M *** ERROR => ThMBufFullRead: ThOpcodeToMsg [thxxmbuf.c 225]
M *** ERROR => ThMBufGet: ThMBufFullRead [thxxmbuf.c 183]
L *** ERROR => BtcEvtRaise: ThScheduler failed (target=, rc=4) [btcevt.c 223]
L *** ERROR => BtcEojRaise: BtcEvtRaise failed: jobname=BI_WRITE_PROT_TO_APPLLOG , jobcount=11414801, status=A [btcevt.c 52]

Hi,
As you are running a Trial version, I do not think HA/ASCS would be relevant for you.
As you found in the dev_ms trace, the port 3601 for message server is not accessible:
NiIGetServName: port 0E.11/3601 = servicename 'sapmsN4S'
***LOG Q0I=> NiPConnect2: connect (111: Connection refused) http://nixxi.cpp 2769
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 4
Check via command netstat if the port 3601 is free for use. The hardware key is obtained from message server and since this port is not available, neither is the message server/the hardware key. Perhaps a VM restart could also help.
Regards,
Srikishan

Hardware key is not displayed in SAP B1 8.81

Hi,
We installed SAP B1 8.81(Evaluation version). Hardware key is exists in Service manager -> Licence Manger.
But it is not displaying in Client System 's Help -> About SAP Business one.
Please let me know how to retrieve hardware key.
Thanks in advance

Hi,
Thanks for reply.
For security purpose we are using Hardware Key of Client's Help --> About SAP business one form --> Hardware key.
Hardware is null in this form in SAP B1 8.81.
Kindly help us to resolve the issue
Thanks in advance
Parthiban

How to get the system specific hardware key.

Hi all,
    I want to get the System specific hardware key(May be Hard disk related key which is unique for every System.) .Now i need to get it using a java program. if possible send me the related links and sample source code. pls help me out to resolve this issue.
Regards,
Kiran.

hi,
   I can able to get the Mac address of computer using the java program. But when i am running a software called "PCQualifier.exe" i am getting the parameters like "uniqueID" and "unique code". so where and how he is getting those things please help me to get those things using a java programme. Any how i am sending the results that i have got after ruuning PCQualifier.Pls kindly help me out to resolve this issue.
Computer Name JAVADEV0005
Operating System Windows XP 5.1 build 2600 (Service Pack 2)
Ethernet Details                   Name [00000008] Broadcom NetXtreme Fast Ethernet                   Adapter Type Ethernet 802.3
MAC Address 00:11:25:F2:98:EF
Hard Disk Capacity    Total      39.06GB
                      Used       84 %
                      Free       6.16GB
RAM Capacity    Total      502 Mbyte
                Used       69 %
                Free       154 Mbyte
CDROM Status CD-ROM Drive Present
USB Information
Total system supported Ports 0
Total Physical Ports 0
Total Devices Connected 0
Total Free Ports 0
Unique ID 5790315021
Unique Code FNVVEFEFHIKO
Thanks & Regards
Kiran.

Sneak Preview NW CE 7.1 SR5 Hardware Key : where to get it from ?

Hi Expert i just installed NW CE 7.1 SR5 ,
     issues:
      1. In order to avail 90 validity i need to provide Hardware key on registration page. How to find this key ?? mine is JAVA stack only??
       2. i dont find irj folder under C:\usr\sap\CE1\J00\j2ee\cluster\apps\sap.com now how can i launch the portal ???
any help would be great.
Regards
Eureka

from start.htm license:
The first step is to obtain the Hardware Key. Log into the system with SAP* user and click on Administer SAP Licenses or use the transaction code SLICENSE. The picture below shows where to find the Active Hardware Key.

Tecra M10 - Stuck CTRL key issue -- perhaps to do with BIOS?

Hello and thanks for reading.
I recently switched my Tecra M10 to Windows 7 (from XP) and it soon developed the dreaded "stuck CTRL key" issue. This causes the keyboard to behave as if the CTRL key is permanently depressed. Sometimes hitting a combination of keys, or bringing up the onscreen keyboard, temporarily solves the issue, but then it returns.
It seems to be an issue many people have, with no simple solution. I've looked at every thread about it I can find, and tried many things to do with drivers etc. without any success.
So firstly, if anyone knows a remedy that works for this particular machine, I would be very grateful to learn it!
Then, there are two things I've not yet done: update BIOS and disable pinch zoom.
I was looking at the following BIOS update:
http://www.toshiba-asia.com/sg/support/drivers/details/25244
... which is version 3.00 and seems to be most recent. My own version is 1.90.
However version 3.00 is labelled "For PTMB0* ONLY". I don't know what this means or whether it applies to me. Can anyone help? Should I install this BIOS?
For the pinch zoom, I've been told that disabling it does sometimes cure the CTRL problem -- but I can't find any pinch zoom facility on the M10. I suspect it simply doesn't have one. Is that right?
Many thanks for any help you can give.

Hi
> I was looking at the following BIOS update. which is version 3.00 and seems to be most recent. My own version is 1.90.
There are different Tecra M10 models on the market.
Check the labels at the bottom of the unit. There you should find some numbers like for example PTMB0E-01K00LGR
The first 6 characters are important: for example PTMB0E
I assume your notebook belongs to European series.
In such case you should check the Toshiba EU driver page for possible BIOS update.
http://www.toshiba.eu/innovation/download_drivers_bios.jsp
However, on Toshiba EU driver page you will find also the BIOS v3.0 for all European Tecra M10 units.
Anyway, back to the CTRL button issue: guess what, you should connect an external USB keyboard and should check how the CTRL button acts.
In case the USB keyboard would work properly, the CTRL button of internal keyboard is affected and you will need to replace the internal keyboard.
PS: it could be possible that the option "sticky keys" has been enabled. To disable this function, you have to press SHIFT button 5 times in the row.

Keyboard hardware key not working

hi,
i'm trying to set the keyboard hardware keys of my vaio, this is the output of a few commands;
sto cercando di impostare le hardware key del mio vaio, butto qua qualche comando per capire meglio:
cat /sys/class/dmi/id/sys_vendor
Sony Corporation
cat /sys/class/dmi/id/product_name
VPCS11E7E
xev: no output.
showkey -k
keycode 360 press
keycode 360 release
showkey -s: no output
/lib/udev/keymap -i input/event6
scan code: 0x49 key code: vendor
xbindkeys -mk: no output.
is there something useful?
- i've created the file "/lib/udev/keymaps/module-sony-vpcs11e7e"
with this text:
0x49 vendor # VAIO
and i've inserted it in "/lib/udev/rules.d/95-keymap.rules" without results.
- i've created a "file" with this text:
keycode 360 = Super_R Super_R Super_R
and then i used the command
xmodmap file
without results.
what i've to do??
Last edited by syco (2011-08-05 13:06:16)

What happens if you press the key in question then perform a dmesg | tail
Any messages like these:
[136424.699297] atkbd serio0: Unknown key released (translated set 2, code 0x94 on isa0060/serio0).
[136424.699303] atkbd serio0: Use 'setkeycodes e014 <keycode>' to make it known.

Updating license key issue

I am attempting to move the SAP B1 application to a different server (pointing to the same database server).
In doing so I have been told I needed to request a new license key. I have done that however when I try to import the license key into the SAP B1 client (from the Administration->License->License Administration program) I get the following error:
wrong license file; hardware key does not match.
I retrieved the hardware key from the SAP B1 Server Suite Manager that is running on this new application server (from the Settings on the License Manager service).
Also, the License Server that appears on the License Administration dialog still points to the original server. I have tried typing in the new server's name but cannot.
By the way I am trying to make this change in the QA enviornment. We are running a W2003 server and serving the SAP B1 client up via citrix. SAP B1 client and server are installed on the same server.
Any suggesitons would be helpful.
Thanks,
Mike
Edited by: Mike Hamm on Sep 29, 2009 1:45 AM

Hi Mike,
>
Mike Hamm wrote:
> How would I check the port? Is that something on the server or in SAP B1?
Both. In the SAP Business One License Manager ->Settings -> Connection details you might like to change the default port number 30000. In order to check your firewall on the server refer to the documentation of the used firewall.
>
Mike Hamm wrote:
> I do not get any error message when I change the server on the License Administration dialog is: "License server changes will take effect at next logon to a company". Unfortunately the server name reverts back to the original server name (which is, by the way, still operational--does that make a difference?)
You can have running the license server on another Server than the one on which SAP Business One Server application is installed. However it will revert back (to last known 'good' license server) as long no valid license file has been importet to the new license server.
>
Mike Hamm wrote:
> When I try to import the license key I received from SAP (after providing the hardware key from the license manager) I get the following error message: wrong license file; hardware key does not match.
Try to download the license file directly from the Webpage, sometimes the files get corrupted, if sent by email.
Further info: Note [776870|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMSZ3PTU4ODAwMDAr)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=776870] and note [578256|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMSZ3PTU4ODAwMDAr)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=578256]
Kind regards
Mario

Windows 8 Key Issue

Here's my problem. Windows 8 came preinstalled on my computer; however, I accidently deleted the Windows 8 key from the bios and now Windows keeps asking me to enter the correct key. Since there is no longer a sticker with the key included with the computer I have no way of finding the key. Does HP keep a record of the keys tagged to the serial number? Or am I just out of luck?
I called HP Support about this and they told me to get the key off the CDs which were included with the computer. When I told him there were no CDs, he said I had bought a used computer mascarading as new because all of their computers ship with Windows CDs. When I disputed this he said that Microsoft could solve the issue for me. Microsoft said that HP could solve it. Can anyone help me? I'd rather not spend money on buying Windows 8
Thanks in advance,
Mike
This question was solved.
View Solution.

HP does not retain records of the keys issued . HP also does not ship Windows CD's with the computers unless they were specifically ordered. If you have somehow deleted the key then you are out of luck, sorry.
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

T400 stuck key issue

I bought my T400 2764-CTO in last December, and started using it on mini dock without any problem. Until recently, it starts to show stuck key issue randomly (not always failure) both at boot up or under Windows Vista.
ERROR
0210 Stuck Key FF
Press <F1> to SetUp
Note: the stuck key keeps changing, sometimes 13, sometimes 1F, sometimes other key.
I opened the laptop, and checked the connection of the keyboard but couldn't locate any problem there. Can this be a keyboard issue? Or even a motherboard issue?
Can Lenovo swap a new keyboard for me? If so, what do I need to do then?
Thanks!
Best Regards

You can call Lenovo service, and log a service call, they will make the necessary arrangements. If you are not confident with bios update then please don't do it youself, and let the warranty department do it for you, as any mistakes can make your laptop useless and you will be paying couple hundreds of euros to get the motherboard replaced.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Retriving the Hardware key in SAP EP 7.0

Hi Experts,
I have installed EP 7.0 in Dev server. I need to retrive the hardware key from Portal so that I can publish
the same to SAP and get the license key.
Please let me know the path in portal where I can find the hardware key.
Thanks a lot in advance.

Since you are on NW 7.0 you will have to visual administrator to retrieve the h/w key. On how to do it, use this sap help link:
http://help.sap.com/saphelp_nw04s/helpdata/en/9f/5e533e5ff4d064e10000000a114084/content.htm
If you just wanna get your h/w key, you can also log-in to the o/s level using <sid>adm & use the command:
"saplicense - get"
- Regards, Dibya

Repeating key issue

I just moved to the Mac a couple of months ago. I love it and haven't looked back. However, today, I used my Mac twice. First, this morning, I didn't do anything unusual. I cleared out my trash, browsed a bit on the Internet and answered e-mail. Then I modeled some artwork. I shutdown my machine, shutdown my cable modem & router and went to work. When I came back at lunch nothing was wrong and I hardly did anything (Internet still wasn't on).
However when I came home after work, I started the machine up and the hard drive icon kept popping up and it was difficult to use the menu because I had to hold down the mouse button instead of just click. It turns out that the space key is repeating spontaniously. I thought it might be the keyboard but it doesn't stop when I unplug the keyboard.
Has anyone had this before? How do I cure it? Thanks.

Hi Redspark,
Did you arrive at any solution to your repeating key issue? I've recently joined the discussions forum because I'm having a similar problem - without having typed anything, my backslash spontaneously inserts itself into any text box available and starts repeating itself across the page. In the Finder, I also get various folders spontaneously highlighting themselves, if I pull down a finder menu, it flashes which makes it almost impossible to select anything. As well I get sudden outbursts of the error chime.
Have done an Archive and Install, reset the PMU. I've also zapped the PRAM, checked my RAM slots, checked Permissions, etc.
Let me know if you've got any further insights.
Thanks.

USMM Hardware key issue

Similar Messages

Maybe you are looking for