UWL workitems not visible

Hi Champs,
In our landscape there are many ECC systems (HR, SRM, ERec) and UWL is configured on a consumer portal which connects to these ECC systems and extracts the workitems. Now workitems from HR and ERec system are visible but no SRM workitems are visible in portal. It was working fine earlier.
We have done the following checks:
1. UWL configuration.
2. Re-registered the system.
3. Checked the RFC destinations and the connection is successful.
4. Workitems are present in SRM system.
5. Connection status doesnt not show any error.
It was working fine until we changed the timeout parameter and restrated the SRM system.
ps: the user has more than 700 workitems in his inbox, would that cause any problem?
Regards,
Piyush.

Hi Piyush,
Check this thread out,
/message/7415415#7415415 [original link is broken]
Regards,

Similar Messages

UWL workitems not deleted

Hi,
not dealt with UWL workitems before.
Client has a PR WF in the system and workitems go to UWL for Approvals.
Instead of releasing the PR from UWL, the user has released it from ME54N.
So now, though the PR is released, it still shows workitems in UWL.
My question is are there any settings (in SAP, Portal) which could handle this, so that whenever user releases a PR thru ME54N, the workitem in UWL gets deleted.
Other question, now since the workitems (for which PR was released from ME54N) are there in UWL, what happens if the user again db-clicks the workitem, will it throw an error?
Last question, what can I do to remove those workitems for which PR was released from ME54N. How can I delete them.
Thanks,
Aditya

Hi Aditya,
As Workitem behaviour is dependent on Status, set the Workitem status to complete using any one of the following FM
   SAP_WAPI_SET_WORKITEM_COMPLETD
   SAP_WAPI_WORKITEM_COMPLETE
   SWU_COMPLETE_R3F_WORKITEM
I dont know the exact one... so kindly check the Documentation of them and choose the best.
As far as i know second one would set the status to complete
Hope this would Solve your issue.
Regards
N.N.

UWL- SAP workitems not visible. ( Leave requests )

Hi All
I am trying to configure UWL so that all leave requests from employee (ESS user) come and sit in the UWL iview of manager in Portal. I am able to get it in Business Workplace in SAP and able to execute the same. But i want the same to be made avaailable in Portal. I have configured the UWL as per documentation and can see the Tasks in the UWL XML on portal but the tasks dont show up in the UWL iview.
Can some one provide a guidance on the same
Regards
PN

thanks Holger,
I had got the same reply from SAP as this seems to be the functionality.
I have some issues though with the Authorisations
I am using ws20000081, ws01000109 transactions for Leave Request and Leave Request Overview.
I am not able to see the Approver name in <b>Approver</b> column in "Create Leave Request" transaction. If i give SAP_ALL, then the Superior name as per the Org strucuture appears in the Approver Column in the service.
Also, the replace button functionality doesnt seem to work. It only shows the Superiors name, I cannot assign any other name where the end user can send the approval if the immediate superior is absent
Appreciate your help
Regards
PN

UWL WorkItem Not able to execute

Hello friends,
when i am trying to execute the workitems of my Z webdynpro applications i am able to see the workitem in the in box but i am getting a screen of R/3 and only statement coming as close window.
In Tcode SWFVISU every thing is maintain. the systems are register in UWL.
i am also getting following error in log files
#1.5#00145E9C67C20063000002C90009C04800045105AB7B32BF#1214984700506#com.sap.work                                                                             flow#sap.com/irj#com.sap.workflow#Guest#0####6b21b320448611ddadcc00145e9c67c2#Th                                                                             read[ThreadPool.Worker5,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error                                                                             #1#/Applications/Workflow/General#Plain###TaskSchedulerDeadline.run()#
#1.5#00145E9C67C20063000002CA0009C04800045105AB7B33A4#1214984700507#com.sap.work                                                                             flow#sap.com/irj#com.sap.workflow.#Guest#0####6b21b320448611ddadcc00145e9c67c2#T                                                                             hread[ThreadPool.Worker5,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Erro                                                                             r##Plain###LockConfigException: Cannot lock configuration object "config://local                                                                             /com.sap.workflow/scheduler/task" without a valid user ID.
        at com.sapportals.config.fwk.data.ConfigLockManager.lock(ConfigLockManag                                                                             er.java:516)
Please help.   Points will be awarded surely.
Regards,
Umesh Chaudhari.

Check SAP Note: 1153955
http://service.sap.com/sap/support/notes/1153955

UWL Preview not visible

Hi All,
I am on Portal 701,
i have created a system object for SRM ABAP system in Portal.
Have created UWL Connector for SRM ABAP system with the same name in System Admin-->Universal worklist
Have registered the System successfully.
Have defined a RFC Connector in visual admin as well.
User are able to see workitems in their inbox.
However they are unable to see UWL preview , i mean they don't get to see Task details in the preview.
Any suggestions on how to get UWL preview?
Regards,
Ashish Shah

hi Ashish,
As my understanding , you missed some of the configuration steps in uwl -Admin.
you should maintain the Task ID in uwl.task.webflow.SAP_ERP_HumanResources.xml file
like the below tag<>
<ItemType name="uwl.task.webflow.TS00008267.SAP_ERP_HumanResources" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchSAPAction" executionMode="default">.
After giving the task id's in uwl-admin. you have to clear the cache in uwl then it will be reflect.
Hope this will be helpfull for you.
Thanks&Regards,
cbr.

Work items are not visible under UWL in portal ?

Hi,
We are upgrading from SRM 5.0 to SRM 7.0.
We have observed one issue here. Workitems are not visible in UWL in portal.
But workitems are available in SAP inbox. i.e SBWP.
Completed items we can see in UWL.
Could you please let me know any idea on this.
Regards
Venkatesh P
Edited by: Venkatesh Padarti on Dec 9, 2010 8:28 AM
Edited by: Venkatesh Padarti on Dec 9, 2010 8:29 AM

Hi Venkatesh,
Can you please share the solution? Which base URL was wrong and where did you correct that?
Your help is really appreciated.
I had post the same question at SRM workflow - work Item is not being displayed If you want to reply there. I will definitely, reward with points too.
Thanks,
Bhavik

BPM TASK IS not visible in UWL Inbox

Hi BPM Expert,
I am facing the big issues in BPM process Triggered problem. earlier i used to BPM start using Web service with Two entity as ID and Username but its was working fine .but i have some requirement to adding one element in Existing WSDL entity as casename , i have added that element and execute the web service using WEBDYNPRO application ,but Task is not visible in UWL inbox but earlier it was working perfectly, after adding that field ,BPm tax is not visible UWL inbox ..
Please guide me ,Its urgent...Plz plz..
Its showing error as
Technical issues is triggered during the process creation..
Thanks
sudhir

Hi ,
I am executing the WEbservice using WSNAVIGATOR but its not execute , its getting HTML log error as below..
1-Web service returned error. Fault Code: "(http://schemas.xmlsoap.org/soap/envelope/)Server" Fault String: "Could not retrieve SDO HelperContext for service_id nsn.com/claimbpmproject/PRINVOKE"
2-
HTTP/1.1 500 Internal Server Error
server: SAP NetWeaver Application Server 7.20 / AS Java 7.20
content-type: text/xml; charset=utf-8
date: Sat, 26 Nov 2011 11:40:56 GMT
transfer-encoding: chunked
Set-Cookie: <value is hidden>
2e4
<?xml version="1.0" encoding="UTF-8"?><SOAP-ENV:Envelope xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><SOAP-ENV:Body><SOAP-ENV:Fault><faultcode>SOAP-ENV:Server</faultcode><faultstring>Could not retrieve SDO HelperContext for service_id nsn.com/claimbpmproject/PRINVOKE</faultstring><detail><yq1:com.sap.engine.interfaces.webservices.runtime.RuntimeProcessException xmlns:yq1='http://sap-j2ee-engine/error'>Could not retrieve SDO HelperContext for service_id nsn.com/claimbpmproject/PRINVOKE</yq1:com.sap.engine.interfaces.webservices.runtime.RuntimeProcessException></detail></SOAP-ENV:Fault></SOAP-ENV:Body></SOAP-ENV:Envelope>
0
Thnaks
Sudhir

"Display Form" button not visible in UWL preview

Hi Friends,
We are implementing Travel module. The standard Workflow WS20000050 has a single level of approval. However, we wanted 2 level approval and so accordingly this was implemened.
Now we want a 3rd level of decision step to be approved by the traveldesk on recept of tickets.
Even the pdf form, which contains the travel details, needs to be visible. In the standard task TS20000118, the "Display Form" button is automatically visible in the UWL preview apart from the usual
"Approve" and "Reject" buttons.
However the content that needs to be shown to the traveldesk is different. To achieve this, i copied the standard task TS20000118 and changed only the task description. Rest everything including the parameters and binding remains same.
But for this task, the "Display Form" button is not visible.
1. Please advice on the possible reasons why this is happening ?
2. Is there any setting or any SPRO configuration wherin we need to
specify the tasks for whom the button needs to be displayed ?? or
Is it some portal side configuration ?
Thanks,
Shashank

Hi Vijay,
Goto:
Universal Worklist Content Configuration -> Click to Administrate Item Types and View Definitions
In the table under the "Current Configurations" tab, select the standard travel configuration provided by SAP -> "com.sap.pct.erp.mss.tra".
Here, search for the code of the task for which everything is working fine; in our case it was TS20000118. Copy this piece of code.
Now download the currently active XML configuration. In the saved XML file, search for the task code which is not working as expected. Replace this piece of code with the code copied in the above step. Save with a different name.
Upload this new configuration with HIgh priority.
Reregister the connector and clear the cache.
These steps solved my problem. Probably it should work for you too.
Regards,
Shashank

Work items are not visible UWL task are visible in tracking in portal

HI
Friends
i am new from sap Ess/Mss implementation project...
i am facing an Problem " Work items are not visible under UWL in portal overview page"
but i am configured all the ess/mss related things....and also Created for one user for Requester(send Leave Request)...and one more user for App-rover(Apporve an Leave)..
Requestor send an Leave through portal send it successfully......but i am facing a problem in uwl under work items are not showing in overview page...but in tracking work items are (Leave request)showing.....work items are not showing in uwl TASK(VERY PROBLEM)...
i am configured and also registered UWL IN PORTAL..it is good..
in sap ecc i can assigned UWL_SERVICE user to roles
1.SAP_BC_BMT_WFM_UWL_ADMIN
2.SAP_BC_BMT_WFM_UWL_END_USER
3.SAP_BC_ADMIN_USER
4.SAP_BC_UWL_SERVICE
PLEASE HELP ME.
Tanks
Shaik Rafi

Hi All,
In such cases, please try to check as below :
1) Create Leave request work item from Employee and check the same under the UWL Tracking tab of employee.
2) Log-in to swi5 transaction of the respective back end system and give "US" -> manager's UserID -> Choose Tasks to be completed from the drop down -> Remove any date if mentioned -> Execute.
3) Here if you can see the Leave request created, but not on the portal, it reflects some portal issue like sync.
4) If no leave request work item is seen here, then there is a problem in the employee manager mapping or the workflow setup.
5) In such cases, you can try to check the Swi1 and check the log of that workflow to understand the current status of the Leave request.
Revert if further help is needed with more info.
Reward points if found useful.
Regards,
Shri vidya S

Process Chain alerts not visible in UWL

I have carried out the weblog test that Ginger published at
/people/ginger.gatling/blog/2005/06/16/integrating-alerts-into-uwl--its-no-problem
and everthing worked fine.
We are, however, trying to use Process Chain alerts from CCMS. These alerts are visible if we run transaction RZ20 in the back end system but the UWL does not see them.
Is there a guide or something showing how to configure this?
Thank you

Hi Bernard,
I've checked out a couple of systems - you can create alert categories for process chain alerts, and once you have the category you can of course assign recipients.
In fact you should see some existing categories in your system for process chains in transaction ALRTCATDEF.
The UWL essentially reflects what is in the BSP ALRTINBOX as it is using the same/similar routines to derive the alert inbox worklist. So if you don't have anything in ALRTINBOX then it is correct that nothing is showing in UWL inbox as well.
You need to set up the categories and recipients against your process chain alerts.
I'm not all that familiar with BI Process Chains but a couple of minutes looking at the IMG in transaction SPRO showed that in transaction RSPC when you select a process chain you can use menu option Settings > Maintain Alert Categories to make the link between the process chain and the alert categories. You'll probably know what to enter here better than I do.
Regards,
Jocelyn

UWL Approve Reject button not visible

Hello Experts,
We have implemented Portal 7.0 SP 18 and configured UWL. All task items are appearing correctly.
But approve and reject button is not visible in UWL. The same is visible in ITS screen when we click on the task.
Kindly help.
Regards,
Nirmal Sivakumar G

Hi Soral,
All workflows from ECC is causing this problem. To be precise I have configured a webflow connector to pull the tasks from SAP Inbox. The approve/Reject button should appear in UWL ivew when we select the task item. But only forward and resubmit options are visible.
I guess the problem is with SP 18 itself. Coz there are similar threads with the same scenario in SP 18.
Regards,
Nirmal Sivakumar G

Substitution, uwl filter "work on" not visible

Hi All,
i have a activated substitution and in our dev- and test-portal i have the uwl filter "work on" above the uwl. Everything is fine.
But in our production-portal i do not get the filter. I have a activated substitution, but the filter is not visible.
Any ideas?
Best regards,
Ben

Hi Karri,
you are right - thank you very much.
Strange behaviour, but now it is clear.
Best regards,
Ben

Need Help: Workflow Decision Task not visible in NWBC for customer Task

Hello All,
I am new to NWBC configuration , need ur expert knowledge for the below issue. I have checked the treat . Approve/Reject button for SRM Approval for RFx response ,but not able to get the exact steps for the configurations in NWBC.
Requirement.
     We are working on SLM/SRM module, where we have requirement to create a custom workflow with custom Task for which we have executed below actions.
Created the Custom Workflow.
Created the custom Task with custom ZCLASS and ZEVET.
Created   Event linkages in SWE2.
After doing this we are getting the workitem in the NWBC, currently we don’t have the Portal system in place, so we are using the NWBC for all our testing.
What is the issue?
     When we select the workitem in the NWBC (UML) inbox , the Decision Task ie “Approve” or “Reject” button are not visible , where as for SAP standard Task buttons are visible.
What help we need?
When we cross check the SCN/IBM portal, found that we need to do the XML file configurations. Can you any one kindly let us know the steps we need to follow to achieve our functionality.
Thanks a lot in advance.
Thanks and Regards
Channa

You need to share the details of what Inbox you are using, configuration steps depend on it. If you aren't using portal, you aren't using UWL and there is no UML inbox. You need to get your facts straight. Most likely you are using the Business Workflow Inbox (SWF_WORKPLACE) or the Lean Inbox (IBO_WDA_INBOX). Both are based on Web Dynpro ABAP and POWL but the configuration is different. Regardless, you posted this in the wrong space. Correct space is either SAP NetWeaver Business Client or Web Dynpro ABAP.

Regarding UWL workitems

Hello Experts,
We have created Customer workflow in SRM system and was trying to approve the same via Enterprise Portal.
We have done all the required configurations and we are not getting the workitems waiting for approval in the UWL.
Unfortunately, tasks which are completed are visible in the Portal UWL.
When we tried previewing the standard UWL iView from Portal content we are able to see all the In Progress workitems.
The same is not visible in the UWL assigned to the Portal role.
We believe this should be some sort of permission issue.
Any pointers in this regards is much appreciated.
Thanks and regards,
Vivek

Dear Santosh
Here's my answer to your questions
1) For how many days workitems will be present in UWL if no action has been taken?
90
2) if we are having an option of increasing the no. of days where we can do it and what parameter we need to check?
Check this post
[UWL: Number of Items displayed;
3) Any consequences if we are doing chages to the standard behaviour ?
Depends on what type of changes you're referring to. ;o)
Kind Regards
/Ricardo Quintas

Workflow task on UWL does not open in new window

Hi,
Some of the workflow tasks in my UWL do not open up in a new window when i click on them. I notice that these tasks are not even hyperlinked (underlined). Instead, when i click on the line, a small pop up shows to options: Forward and Resubmit. Therefore i am not able to approve / reject these workitems.
Whereas there are some other work items which open up in a new window on click.
Is this problem related to workflow configuarion (perhaps enabling the WF for portal) or is it something to do with UWL configuration?
Appreciate your help.
thanks
zubair

Hi Paul,
I face the same problem, any findings so far?
Thanks!
Best regards,
Sandra

UWL workitems not visible

Similar Messages

Maybe you are looking for