V 3.2 v2 now has problems with layouts, displays images fine in IE10, Firefox but not in Chrome...

Images placed in a page are not displaying in the same places in the design view on the rendered Chrome page, they are perfect in IE 10 and Firefox but not chrome / safari (ipad)?
In other words I cant get all the browsers to render the same, in order to get one set to work I have to position images one way and then they dont work in the other browsers? it doesnt make much sense but i cant seem to figure it out and need urgent help!
see here: http://www.nalpeiron.com/--analytics-solutions-by-role--.html
this has been setup to work with chrome, but in the design view you have to place the images in totally wrong places to get them to show correctly....
if you review in ie/firefox you can see the problem!
Ideas?

Every browser will potentially line break the same text with the same formatting differently due to subtle differences in the text layout engines between browsers, so the inline graphic approach is generally the best approach for achieving completely reliable results.
The reason the difference was so dramatic between IE or Firefox versus Chrome or Safari is that Chrome and Safari are based on Webkit and Webkit rounds percentage leading to a whole pixel value where as IE and Firefox interpret percentage leading as a fractional pixel amount, if necessary. This means line spacing for text with leading that's specified as a percentage will be substantially different between IE/Firefox and Chrome/Safari. You can avoid this by entering a pixel value (i.e. "14 px" for leading in the Control Strip or Text panel in Muse.

Similar Messages

PDF Documents with Functional Buttons - Works for IE and FireFox but not for Chrome and Safari

To all,
Good morning. Our institution developed a PDF document with functional buttons for printing and e-mailing. When the document is viewed via Internet Explorer and Firefox, the functional buttons work as expected. However if the document is viewed via Chrome and Safari, the functional buttons do not work. The workaround for those who are using Chrome and Safari, the PDF document needs to be saved to their local drive before the functional buttons work.
Has anyone experienced this issue before? If yes, what was your solution other than the workaround.
Thanks.
Babylon5

Here's how to configure your browser to run Adobe Reader: http://helpx.adobe.com/acrobat/using/display-pdf-browser-acrobat-xi.html

I'm having problems with syncing my iphone calendar to my ipad, but not the other way around

My iPhone 5 will not sync with my iPad calendar. If I make any changes or add an appointment on my iPhone it will not sync to either iCloud or my iPad, however if I add or change an appointment on my iPad or iCloud it will update my iPhone calendar. I've read where other's are having the same problems but haven't read anyone's post of where a solution has helped. Anyone??

There is no 8/9 pin to 30-pin to adopters that support audio. There are such adopters but they only support charging and syncing, not audio
http://www.guuds.com/product/iP5-9020__Lightning-8-Pin-Female-to-30-Pin-Male-Ada pter-for-iPhone-4S-iPad-3-iPod-Touch-4-Black.html
says
Notice: this converter adapter can not support any audio and video product
Message was edited by: lllaass got mixed up

Had a problem with hijacked browsers. Got it cleaned, Firefox will not open or un install. I want to remove existing and install a "clean" one.

Browsers were hijacked, found and quaranteened(sp?) the bugs, Mozilla will not open from the desktop, Programs. Tried to un-install either one-no joy. Want to use Firefox again, thought I could uninstall and reinstall "Clean" versions. If nothing else, since I can't use Mozilla, want to remove them permanently.

http://kb.mozillazine.org/Uninstalling_Firefox#On_Windows
Start here for manual removal instructions: <br />
'''Even if the uninstall fails, as it may in some cases, continue on with the rest of the uninstall instructions. '''

The scroll feature has stopped working on my laptop touchpad in Mozilla Firefox but not Internet Explorer.

The scroll feature was working well on my laptop touchpad but has ceased to work in Firefox. It continues to work well in Internet Explorer. Help!

Its due to the adobe reader add on. I removed adobe reader and installed foxit reader. Now everything seems perfect. My laptop model is model is Acer Aspire 5820 TG and I use synaptics driver.
Solution: (Courtesy - iuliand)
If you have issues with touch-pad scrolling in FF4 do this:
1) disable Adobe Acrobat add-on and test if it works, otherwise
2) install the latest touch-pad driver.
Hope this will help others.
Edit:
If the above does not work, temporarily disable all add-ons in order to check if there is another one that may cause this.
Also, make sure you update to the latest touch-pad driver from the touch-pad manufacturer site (very easy to do if you have a Synaptics). Most of the time drivers from notebook manufacturer support site are NOT up to date.
Keep in mind that you may need to do both things (disable acrobat AND install latest driver). Both are possible causes and may occur at the same time, as it was in my case.
Edit 2:
If you have an ALPS touch-pad and none of the above works, check dog425's post below in this topic. He pointed out a solution found in this thread: https://support.mozilla.com/en-US/questions/791829#answer-163071

TS1574 My apple macbook pro retina 15'' ME664 has problems with sound.Either there will be no sound at all or at startup there il be very scary and broken sound and afterwards still there would be no sound.Secondly , it does not start in one shot.

My apple macbook pro retina 15'' ME664 has problems with sound.Either there will be no sound at all or at startup there il be very scary and broken sound and afterwards still there would be no sound.Secondly , it does not start in one shot.atleast 2 to 3 times pressing power button for longer time starts it up and afterwards still there will be no sound. Please help

This morning i was not able to hear sound on my recently purchased macbookpro retina 15 inch model.My attempts to resolve this issue by going to system preferences and removing the mute box that was ticked as active. i had downloaded much earlier a mac version of logmein app and noticed that in the sound box noted above that there was a bar indicating that the default was now to logmein. i had never used this app. Why it started today, i have no idea. I moved the logmein application to trash and deleted the app , however it did not remove the default option which still blocked the sound.
Going to a macforum gave the tha anser that to remove the logmein app, it first had to be reinstalled a nd them use the uninstaller option ftrom the dropdown menu. for now that has resolved the failure to allow sound oputput.

This message recently popped up on my PC - "iTunes has detected a problem with your audio configuration. Audio/video playback may not operate properly." What does this mean and how to fix ??

Hi Everyone - recently this message popped up on my PC, when I was trying to import cd's into the iTunes library and then onto my iPod - "iTunes has detected a problem with your audio configuration. Audio/video playback may not operate properly." Can anyone tell me what this means and how to fix it ?? I am not fantastically PC savvy, so any information explained fully and all steps to follow to get my music playing again would be great !! Thanks, SC

Hi B, thanks so much for helping me troubleshoot !!
Ok, so when I went in to check the Audio tab of the Sounds and Audio Device Properties, I found the following:-
* Sound Playback Default Device = No Playback Devices.
* Sound Recording Default Device = No Playback Devices.
* MIDI Music Playback Default Device = No MIDI Playback Devices.
All text in this drop-down box were light grey, and therefore unable to be selected or altered.
I also tried playing a cd through Windows Media player, to see if I could get sound a different way. When I put the cd in and clicked on Play, the following message appeared, "Windows Media Player cannot play the file because there is a problem with your sound device. There may not be a sound device installed on your PC, it may be in use by another program, or it may not be functoning properly."
Any ideas ? I had sound previously, but then a work colleague re-built the PC to add more space to the hard drive, and since then, no sound. I know this may now not just be an iTunes issue, but I would appreciate any assistance you can offer.
Thanks again,
Shell

Downloaded latest update ios 5.1.1.last night - now have problem with my email some being sent others not - any ideas?

Downloaded latest update for iphone 4 ios 5.1.1. last night - now having problems with my emails - all show being sent - but not being received also no b.c.c. to myself coming up on iphone. Any ideas??

The passcode settings simply give you the option of having the passcode lock immediately you lock the screen, or after a delay period. If you set a delay the passcode lock will not activate for the period of the delay. I have mine set to one minute. It is a "convenience" measure to save me having to re-enter the passcode if I lock the screen then immediately remember that there was something else I wanted to do. Obviously this entails a small compromise on security and if you are at all concerned then you should set the passcode to "Immediately". It really has nothing to do with the camera short-cut (though loads of users seem to have run away with this notion). It would be the same if you just did "slide to unlock" during the delay period.

FYI: MS-7125 BIOS has problem with Hard Drives withNative Command Queuing (NCQ)

For those the have messed my two treads on which both ended up being cause by K8N Neo4 BIOS problem with HD's with NCQ.
Will wonders never cease? MSI Support finally conceded the BIOS has a problem with Hard Drives with NCQ and they have forwarded the problem to their programming department.
However, do not look for any results for above two weeks.
Roger

The problem that this thread has been trying to follow is the incapability of the nVidia RAID Controller with Serial ATA Type 2.5 drives. I know the threads has been hard to follow and part of that is because when I started the thread I had what appeared to be three totally un related problems, but all three were traced down the common problem of the incapability of RAID Controller with Serial ATA Type 2.5 drives.
The title of this thread is MS-7125 BIOS has problem with Hard Drives with Native Command Queuing(NCQ). The statement was true at the time it was written and has nothing to do with memory problems.
Sense the thread was started MSI has fixed the BIOS part of the problem, but we have sense learned the nVidia RAID Controller Command software and its driver has problems too. I have been working MSI Support, they have been using me to test pre-beta BIOS and Drivers soon. Of the testing I have done the pre-beta BIOS worked and the Pre-beta 32-bit driver works. I am assuming that the latest BIOS V1.B had as part of it included fixes was the needed fixes for working with the nVidia RAID Controller as I have test the pre-beta RAID Driver with BIOS Version V1.B as the Raid array function fine windows XP Pro 32-bit Edition. As I have had no communications with MSI support of over a week now I am hoping for a release of 32-bit and 64-bit RAID Drivers. But, nobody should get the hopes up, because through other backdoor sources nVidia is having a hell of a time. One reason for this I heard is that the nVidia RAID Controller is fully software, no hardware other than the electrical drive interfaces. Their problem started when they tried using the old 32-bit code Controller with new 64-bit hardware drivers and now they are having to totally rewrite the controller core in 64-bit code. But, knowing my source, it may all be fiction.
The RAID Array you say is up and running, are the drives full specification SATA 2.5 in other words do the both have 3Gb/s speed and NCQ. If you send me the full part numbers I will check the specifications a get back to you. Because if you have nVidia RAID 0 Array you working you will be the first to have done it and there about 230 people around the world that would like to know how you did it, even MSI, who's pre-beta nVidia RAID Drivers that will work with BIOS V1.B for 32-bit Windows only and nothing for Windows XP 64, would like to know.
Roger

I just moved my itunes library from a win 7 computer to a win 8.1 computer. Getting an error message "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. Can't play CDs or get audio file from web!

Help! I just moved my itunes library from a Win 7 computer to a new Win 8.1 computer following the instructions on the itunes website. Everything is good except I'm getting an error message on the Win 8 computer if I try to play a CD or get an audio file off of the internet. I get an error message that says "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. I don't know where to look for or fix the audio configuration on the win 8 computer. As far as I can tell the iTunes configuration looks the same as on the other computers in the house. At this point I don't dare plug my ipod touch into the Win 8 computer for fear it will get messed up.

I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
However, I would also like to rent movie's from iTunes,
Would be great if iTunes would let you choose the output device, too, like most other applications using sound from Skype to Windows Media Player,...

Error message after upgrade to iTunes 11: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point my PC running XP loses all audio.

Several attempts to upgrade to iTunes 11 have failed. After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray. Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
I did that. I reinstalled iTunes 10.5. Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
What might be the problem with my audio configuration?
Why doesn't my iPhone 4S work with iTunes 10.5? It used to work with iTunes 10.5.
Please advise.
ep

This forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
Regards.

Tp ended with error code 0247 - addtobuffer has problems with data- and/or

Hello Experts,
If you give some idea, it will be greatly appreciated.
This transported issue started coming after power outage, sap system went hard shutdown.
Then we brought up the system. Before that , we do not have this transport issue.
our TMS landscape is
DEV QA-PRD
SED-SEQSEP
DEV is having the TMS domain controller.
FYI:
*At OS level, when we do scp command using root user, it is fine for any TR.
In STMS, while adding TR in SEQ(QA system), we are getting error like this.
Error:
Transport control program tp ended with error code 0247
     Message no. XT200
Diagnosis
     An error occurred when executing a tp command.
       Command:        ADDTOBUFFER SEDK906339 SEQ client010 pf=/us
       Return code:    0247
       Error text:     addtobuffer has problems with data- and/or
       Request:        SEDK906339
System Response
     The function terminates.
Procedure
     Correct the error and execute the command again if necessary.
This is tp version 372.04.71 (release 700, unicode enabled)
Addtobuffer failed for SEDK906339.
Neither datafile nor cofile exist (cofile may also be corrupted).
standard output from tp and from tools called by tp:
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0247

when we do scp using sm69,
SEDADM@DEVSYS:/usr/sap/trans/cofiles/K906339.SED SEQADM@QASYS:/usr/sap/trans/cofiles/.
it throws the error like below,
Host key verification failed.
                                                                                External program terminated with exit code 1
Thanks
Praba

When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem each and every earphone am inserting goes unusable

When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem whenever i connect earphone each and every earphone gets un usable. Already made a factory reset. please arrange for a rectification.. :'(

Hi Ganeshpandianm,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371?viewlocale=en_US
"iTunes cannot run because it has detected a problem with your audio configuration"
Cheers,
- Judy

Firefox does not load long images, pixelates images if they are not in their original size, and has problems with thumbnails (in some sites)

Firefox has problems with images.
In sites like deviantART or ImageShack with full-view option, images that are not in full size/thumbnails get slightly pixelated e.g. http://img251.imageshack.us/f/screenshot2tq.jpg/
Long images get completely messed up if full-viewed e.g. http://img689.imageshack.us/f/screenshot5z.jpg/ (though if the file is only big, it loads just fine)
Also, thumbnails in some sites get messed up e.g. http://img201.imageshack.us/f/screenshotyr.jpg/
And in general, Firefox has more 'glitches' like not allowing to add more search engines. It wasn't like that before and I can only assume that it got messed up somewhere with updates, but I'm not really sure.
I've tried cleaning out cache, re-installing Firefox (multiple times) and even downloaded Firefox 4 beta, but the problem remains.
I use Ubuntu.
Does anyone else have similar problems? Or know where the problem lies?

Do you have the latest driver for your graphics display card?
Create a new profile as a test to check if your current profile is causing the problems.
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

I installed Mavericks yesterday and have now got problems with QuarkXpress 9. Every time I click on an image and try to move it the application crashes. Anyone had similar problems or got any suggestions?

I installed Mavericks yesterday and have now got problems with QuarkXpress 9. Every time I click on an image and try to move it the application crashes. Anyone had similar problems or got any suggestions?

Hi Guys
Updated my 2 imacs to Maverick yesterday. Schoolboy error on my part not checking if there were problems with any programmes before I did.
Quark is now a nightmare with no short term answer on the way. As a Quark user for over 20 years this is just another reason to hold your hands up and say OK Indesign you win I will have to learn how to use you and Quark will be a distant memory.
I am told there will probably be no solution to getting quak 9 running on Maverick and that you will need to update to 10 in about 2-3 weeks to get back to normal. Having spent a few bob on 2 versions of 9.5 only in Feb this year i didn't really want to upgrade yet.
So its cough up to carry on using Quark or learn Indesign.
I have lost faith in Quark as they are quick to send me e-mails asking me to upgrade to this and that version, why didn't they send one out saying do not upgrade to Maverick. Perhaps they know there loyal follwing will uograde to 10 and will generate a nice little bonus before Xmas.
Lots to do today and will now take 10 times longer to do it. Is this 2013 or 1974!!!!!
If anyone hears of a solution please post ASAP

V 3.2 v2 now has problems with layouts, displays images fine in IE10, Firefox but not in Chrome...

Similar Messages

Maybe you are looking for