Valid from and Valid to are not getting copied to follow up document.

Hi Experts,
I am creating job quote as a follow up document from master quote.All are getting copied from the master quote to job quote,but valid from and valid to dates are not getting copied from master quote,instead it is calculating the date from date profile rules.
But I need to transport the dates from Master Quote to Job Quote.
Please advice.
Thanks,
Adi.

Hi,
You need to implement CRM_COPY_BADY for that. Please refer to:
Re: create a new follow up complaint to the earlier completed complaint
Regards,
Nicolas.

Similar Messages

How are valid-from and valid-to dates set in TRPROD table in APO during CIF

First question:
How are the valid-from and valid-to dates set in the APO TRPROD table?
For example, if I activate a transportaion lane model on March 1, 2008, will the valid-from and valid-to in TRPROD be 20080301 and 99991231?
Or are these dates defined in the model itself? Or in APO config somewhere?
Next question:
Suppose I rerun the model on May 1 2008 to add some records that didn't get added in the March 1 run. But suppose I want to back-date the valid-from of these records to March 1, rather than use May 1 as the valid-from.
Can this be done?
Or is the valid-from always the date of the CIF that creates the TRPROD records?
Please advise.
Thanks

Hi Srinivas -
Thanks very much for replying so quickly, but your response didn't answer the questions.
Let me try again.
1)
If I run a CIF on March 1 2008 based on a model that will generate APO TLane data, will the TRPROD valid-from and valid-to get automatically set to 20080301 and 99991231?
2)
If the answer to this question is yes, then is it also true that if I run a new set of records in on May 1, 2008 (no duplications with the original set), then the valid-from and valid-to dates will be 20080501 and 99991231.
3)
But if (1) and (2) are both true (if you answer them both "yes", then suppose I want the May 1 record set to have valid-from dates of March 1 (for example, if the May 1 record set includes records that didn't get included in the March 1 set due to an error in selection criteria). How do I get the valid-from to be March 1 when I run the CIF on May 1?
On the other hand, if (1) and (2) are NOT true, then how DO the two dates get set during a CIF ????
Thanks
djh

ARQ: Are "Valid From" and "Valid To" dates are considered for risk analysis???

Hi All,
I have one question w.r.t. risk analysis of user while raising a request in ARQ.
I have noticed that, when a user is assigned 2 conflicting roles in a request (with "Valid From" and "Valid To" fields being the same), ARQ shows risk violations properly.
This is quite logical, because user is assigned conflicting roles within the same dates.
In another scenario, if a user is assigned 2 conflicting roles in a request (with "Valid From" and "Valid To" fields being different)
Example:
Time Administration : Valid From=15.06.2014 and Valid To= 31.12.2014
Payroll Administrator: Valid From=20.06.2014 and Valid To= 31.12.2014
ARA still shows as violations (in ARQ)! Though the "Valid From" dates are different.
Logically, user is not assigned these roles at the same time to cause a risk violations. However, system is showing violations.
May I know if validity dates are considered while performing risk analysis in ARQ? If no, then what could be the justification?
Please advise.
Regards,
Faisal

Rafal,
Thanks for your reply.
Does it mean that all future dates will be considered while analysis?
OR
Does ARA consider these dates?
Regards,
Faisal

Name of the table where can get the two fields Valid-From and Valid-to for

Hi gurus
I want name of the table where I can get the two fields Valid-From and Valid-To and their relation ship with the header table in BOM
Regards
Kaisar

You can only get the Valid from date from the table STKO.
To get the valid to date, you have to take one day less than the valid-from date of the next record for the same BOM.
Alternatively use the Function module:
CSAP_MAT_BOM_READ
It will give both valid from and valid to dates in the tables parameter: T_STKO
Regards,
Ravi
Edited by: Ravi Kanth Talagana on Jul 2, 2008 4:37 PM

How to pass Valid from and Valid to Dates in CS_BOM_EXPLOSION

Hii Experts,
My requirement is to explode BOM using CMC LDB and generating files for all the remaining months by varying Valid from and Valid to dates. For this I am using CS_BOM_EXPLOSION but it has provision for a single date field.
Can you please guide me how to pass both Valid from and Valid to dates in CS_BOM_EXPLOSION ? And if you can suggest any other alternative, its most welcome...
Regards,
Vikas

Hi Vikas,
There is a tables parameter STBP which is of type CSXGEN.
This structure CSXGEN contains two fields valid from date(DATUV) and valid to date(DATUB).
Is this what something you are looking for?
Regards,
Swarna Munukoti

Table containing 'Valid From' and 'Valid To' dates -- tcode SU01

Hi All,
I want to know the Table containing 'Valid From' and 'Valid To' dates -- In tcode SU01 ---Tab Logon Data there are 'Valid From' and 'Valid To' dates. I want to know the table(s) where this info is stored.
thanks
Naved

Looks like you have two userids. Login to SDN using your userid that created the post and assign the points. If you don't see the radio button then change your original post to a question.
Message was edited by: Prakash Singh

Weights are not getting copied from quote to order

Hi All,
While creating sales order items with reference to a Quote the weights are not getting copied (zero shown in weights) even though the material in quote has weight.
Why are the weights not getting properly from quote to order .

hi
goto VTAA and select the target document
click on Magnifying glass symbol
here check whether you have selected complete Reference or not
But if you select this then the system copies the source document completely.
Procedure
If you mark the field, the system copies the source document into the target document completely. The system also copies the complete reference indicator. You cannot change the indicator in the target document.
Regards

Valid from and valid to properties under history preservation transform

I have created_dt and last_updated both date columns in source table and also in target table.
Now under history preservation transform for Date columns:
For "Valid from" and "valid to" properties: which column should i pick?
how can i use created_dt and last_updated columns under history preservation?
What is current flag property, should i leave this blank if i don't have any flag "bit type" column like indicator in source or target table.
My Dataflow has:
Source_table -> Qry_Transform -> Table_comparison > history_preservation - > Key_gen - > Target_table.

Valid from and Valid to in History Preservation transform deals with SCD (slowly changing dimensions).
In most of the scenarios, Valid From comes from the source (as Effective From date) for which the dimension has a particular value.
Eg:
SALES REP, Region, Effective From
A, California, 01.01.2011
Valid To column in History Preservation is the default value that you provide inside. In case of preserving history of an update, Valid To column of the old record can have the Valid From value of the new record, or one day before that. You have option to set the same in History Preservation.

Date entered between valid from and valid to it should throw error

HI i have a doubt in the dates see
i have a column for the valid from and valid to date
EXAMPLE
customer cform NO                 SUBMITTED               VALID FROM            VALID TO         uSER
17     OUIIUYUIY     02.04.2008     03.04.2008     03.12.2008    SAB_BEGUM
WHEN I GIVE the dates in between the period it has to give throw the error
example if i give like as shown below it should pass the error
17      FHGFF2                   02.04.2008                     03.04.2008              03.06.2008         SAB_BEGUM
now how can i pass and check the the dates, it has to accept ones the date is after 04.12.2008 , in between the period it should throw the error. please help me out

have a look at this:
http://help.sap.com/saphelp_nw70/helpdata/EN/a7/5139ef407a11d1893b0000e8323c4f/frameset.htm
and search for the pre defined events in table maintenance dialog.
generate table maintenance->create a maintenance dialog->Maintaining and changing an existing maintenance dialog ->Extended Table Maintenance Events.

How to change dateformat of VALID FROM and VALID TO properties in xml forms

Hi all,
I have created a news using xml form bulider and i have given lifetime for that news ,also displaying the VALID FROM and VALID TO in news.By default it is in mm.dd.yyyy format but i need to display the dateformat as dd.mm.yyyy in show form.Is there any possiblity to change the format in XSLT or any other solutions.
Regards
Bala

Hi Bala
Check this XML FORMS - Date Format.
Its a quite easy way.
Regards
BP

Material Number and Serial Number are not getting filled...Very very urgent

I have my code in the badi...CRM_EQUI_LOAD...method PERFORM_LOAD.In this i try to to create a component for the ibase using the function module... CRM_ICSS_CREATE_COMPONENT...The component gets created but the material and serial number are not getting updated...It is very very urgent..please help....

I am not sure what information you are passing in given FM.
But in my case I have used FM 'CRM_CREATE_IBASE_FROM_EQUI' to create Ibase and component. It creates IBase and Component along with other details like material number and serial number.
you may refer the below code for the same >
Call the standard handling for crm equi load.
call function 'CRM_CREATE_IBASE_FROM_EQUI'
    exporting
      is_header         = is_header
      it_equi_dmbdoc    = it_equi_dmbdoc
    changing
      et_error_segments = ct_error_segment
    exceptions
      technical_error   = 1
      others            = 2.
if sy-subrc <> 0.
    raise equi_load_badi_error.
endif.
Cheers,
Ashish

Sub items are not getting copied into excise invoice

Hi Guru's
I am using Sales BOM in my sale order, pricing and inventory are controlled at sub-item level.
I am creating the outbound delivery with reference to sale order and billing document (Commercial Invoice) with reference to outbound delivery.
When I create an excise invoice in J1IIN, subitems are not getting copied from billing document, instead only main item is getting copied along with sum of all the excise duties of subitems. Ex: A is main item (Not relevant for pricing). B and C are subitems with excise duty 10 and 20 respectively. Here A is getting copied with excise duty 30 (10 +30).
When I download the excise register, register is showing all A, B and C items with quantity but it is not showing the corresponding excise duties of subitems. We would like to avail cenvat at sub items.
Kindly suggest me how can I copy subitems into excise invoice from billing document.
Thanks & Regards.
Swamy H P

Hi Lakshmipathi,
Thank you so much for the response.
Yes, I am able to save the outgoing excise invoice(J1IIN) without any errors. It's working fine for normal materials(With out BOM), but for BOM materials even though main item is not relevant for pricing as pricing is controlled at sub items all the excise duties (BED, ECS and S&H cess) of sub items are getting copied to main item while creating the outgoing excise invoice.
I mean excise invoice is showing only main item with all the sub items excise duties. same is getting posted also.
But when I extract and download RG1 register, RG1 report is showing both main item and sub items with quantity but excise duties are not shown.
I debugged and found that excise duties are not flowing to table J_1irg1 from J_1iexcdtl.
Thanks & Regards,
Swamy H P

Freight Charges from PO into MIRO is not getting copied.

Hi Experts,
Please see the document flow and the issue below.
PO -> MIRO -> MIGO
Here, I have entered freight charges manually in PO, when use the reference to create MIRO.. the freight charges are not getting copied from PO into MIRO.
Why set of configuration I have to perform to solve this?

Hi,
Open you condition type in tcode M/06 which you have created for freight and check the settings as below..
in control data 1-
Cond. class-A(Discount or surcharge)
Calculat.type-A(Percentage)
Cond.category-B(Delivery costs)
Plus/minus-A(Positive)
Check the Accrual Key.
Check whether Accrual key is provided in your pricing procedure for your freight condition.
In PO select your freight condition from conditions tab and click on detailed tab there provide your freight vendor in the same screen you can view the condition value which then flows to your MIRO when posting delivery charges.
While doing MIRO for posting delivery charges select planned delivery charges.
Thanks

Configuration of product not getting copied in follow up transaction

Hello all,
we are implementing CRM 5.0 . IPC is configured for pricing. After entering products in quotation, I go to configuration tab at item level and configure my product by selecting characteristics. Problem arises when I create a follow up document from quotation. Configuration of individual items that I had done earlier does not get copied in follow up transaction and has to be done again. Is there some setting in IPC/ CRM that will let me copy entire configuration of quotation item?

Hi Sumedh,
there is note 899894 with a detailed description how to customize it the correct way! hope it's helpful!
Regards, Gerhard

Date and time fields are not getting updated in database

Hi,
I am Using the bapi SD_SHIPMENT_HEADER_CHANGE in my program ...
I am using bapi_shipemnt_create for creating shipment document but, trying to enter the date fileds using this bapi .
can anybody please tell me how shud i pass this variables exactly ...
i tried giving test data and checked this bapi .. the result in changing parameters is also appearing but in databade itself the date fields are not getting reflected ...
The fields ate DTDIS ,UZDIS, DATEN,UATEN. ( i am trying to map these fields in changing parameters)
          gw_vttkvb_new-mandt = sy-mandt.
          gw_vttkvb_new-tknum = gw_return-message_v1(passing shipment number )
          gw_vttkvb_new-dtdis = gi_ship_doc-dtdis.
          gw_vttkvb_new-daten = gi_ship_doc-daten.
          gw_vttkvb_new-uzdis = gi_ship_doc-uzdis.
          gw_vttkvb_new-uaten = gi_ship_doc-uaten.
          APPEND gw_vttkvb_new TO gi_vttkvb_new.
          CALL FUNCTION 'SD_SHIPMENT_HEADER_CHANGE'
          EXPORTING
            i_tvtk                             = '
          I_DESTINATION                      =
          I_DEPARTURE                        =
          OPT_DIALOG                         = 'X'
        IMPORTING
          E_SERV_AGENT_FROM_DELIVERY         =
          E_ROUTE_FROM_DELIVERY              =
          E_LEG_DETERMINATION_DONE           =
          E_NUMBER_OF_CHANGED_LEGS           =
             TABLES
               c_xvttk                            = gi_xvttk
               c_yvttk                            = gi_yvttk
               c_xvttp                            = gi_xvttp
               c_yvttp                            = gi_yvttp
               c_xvtts                            = gi_xvtts
               c_yvtts                            = gi_yvtts
               c_xvtsp                            = gi_xvtsp
               c_yvtsp                            = gi_yvtsp
               c_xvbpa                            = gi_xvbpa
               c_yvbpa                            = gi_yvbpa
               c_xvbadr                           = gi_xvbadr
               c_yvbadr                           = gi_yvbadr
               i_xtrlk                            = gi_vtrlk
               i_xtrlp                            = gi_vtrlp
          I_DEPARTURE_SEQUENCE               =
          I_XVTFA                            =
          I_YVTFA                            =
             CHANGING
               c_xvttk_new                        = gi_vttkvb_new
            EXCEPTIONS
              invalid_change                     = 1
              route_insert_failed                = 2
              tdlnr_insert_failed                = 3
              status_planned_failed              = 4
              status_registrated_failed          = 5
              status_loading_start_failed        = 6
              status_loading_end_failed          = 7
              status_completion_failed           = 8
              status_shipment_start_failed       = 9
              status_shipment_end_failed         = 10
              OTHERS                             = 11.
          IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
         ELSE.
             **** Save shipment created
           CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
       EXPORTING
         WAIT          =
              IMPORTING
                return        = gw_return.
          ENDIF.
Regards,
shilpa talluri .

Hi,
Try this
DATA: wa TYPE zvariant.
wa-mandt     = sy-mandt.
wa-z_var     = 'test'.
wa-projid      = 'test'.
wa-relid        = 'test'.
wa-srtf2       = 'test'.
wa-clustr      = 'test'.
wa-clustd     = ''test'.
INSERT zvariant CLIENT SPECIFIED FROM wa.
Raul Natu

Valid from and Valid to are not getting copied to follow up document.

Similar Messages

Maybe you are looking for