Validation messages in JSF (when not using ADF faces)

I've spent some time with JDeveloper 11 and would like to use it on an upcoming project. I have to target IE 6, so I won't be able to take advantage of ADF Faces. Instead I'd like to use the ADF Business Components with a standard JSF interface so it can be used by people still running IE 6.
I've created a Business Component from a database table and can bind a JSF HTML Creation Form by dragging the appropriate view from the AppModule in the Data Controls pane. However, when I attempt to submit the page without all the fields being valid I get the following validation error message:
j_id__ctru2:j_id__ctru6: Validation Error: Value is required. j_id__ctru2:j_id__ctru6: Validation Error: Value is required.
I've tried making this more descriptive, but editing the error message in the Validation Rules section of the Business Component has no effect. What's the best way to convey a meaningful validation message to the user when not using ADF Faces?
Also - I'm still very new to JDeveloper. Since I won't be able to rely on my users having Internet Explorer 7, would you recommend I stay with JDeveloper 10? The examples and documentation I've seen so far for JDeveloper 11 appear heavily biased towards using ADF Faces so I'm starting to wonder how much support is there for using plain old JSF.
Thanks for your time!

Hi,
if you are completely new to this then I suggest to use JDeveloper 10.1.3 and ADF Faces in there. Its good to use with IE6 as well. Currently we do have more tutorials available for this release than for 11, which for this reason is a better choice for someone new to this
Frank

Similar Messages

When I use my IPhone 4S to view the Shaw Go Movie Central App when I am at home I only use WiFi which is automatic, I start watching a show and sometimes I will get a message like "you can not use your cellular for video playback" or something close to th

When I use my IPhone 4S to view the Shaw Go Movie Central App when I am at home I only use WiFi which is automatic, I start watching a show and sometimes I will get a message like "you can not use your cellular for video playback" or something close to that. Then I received an email from Telus saying I had used my 3G instead of Wi-Fi using 75% of my data. How can this happen when I'm on Wi-Fi at home? If it switched to 3G for some reason I should have been disconnected and not just transferred to 3G network using up my data. What is the fix for this??

It doesn't have to be that complicated, Verizon iPhones come unlocked, just tell VZ you're going on Holiday/Traveling and suspend the service, no need to pay for service if you're not going to be using it. Pick up local SIM cards in the countries of your choosing, pop them in, re-activate iMessage and you're set!
I recommend getting a SIM card from the Three network in England, they have great EU roaming rates and free like-home roaming in Italy.
Set your phone's region to match the country you're in, it'll save from some headaches when calling local/international numbers.
To answer your questions,
1. If you choose not to have a local SIM card, it is good to keep your phone in Airplane mode to save battery.
2. Make sure the two iPhones have different names to reduce sync/restore issues.
3. If husband has an iPhone also, you can chat with iMessage/Facetime, just give him heads up about the new number you'll have. Otherwise, use Whatsapp if he's got an Android. You can activate Whatsapp with your American number or the international number if you choose to get a SIM in Europe.
Also, Get the MagicJack app and/or Google Hangouts, both of those apps provide you with free calling to the USA and Canada using any internet connection. Google Voice is another good way to SMS across the seas.
Let me know if you need any more tips for iPhoning across the pond.

When I use the Alt key and the clone tool, I get a message that I did not use the Alt key to define

Whe I use the Alt key with the clone tool, I get a message that I have to use the Alt key to define the area to be copied. What am I doing wrong?

I tried to check the alined box, but it would not work. I was able to check
the Sample box, but they they give you about 5 choices to check and I have
no idea what they are all about. I appreciate your help.
Dino
In a message dated 9/18/2012 11:09:06 A.M. Eastern Daylight Time,
[email protected] writes:
Re: When I use the Alt key and the clone tool, I get a message that I did
not use the Alt key to define
created by hatstead (http://forums.adobe.com/people/hatstead) in
Photoshop Elements - View the full discussion
(http://forums.adobe.com/message/4707426#4707426)

Do some processing before loading jsf fragment created using adf task flow

Hi,
I am working on JDev11g.
I want to create SelectItems of SelectOneChoice dynamically before loading jsf fragment created using adf task flow
I tried by implementing RegionController class's method RefreshRegion in my backing bean of jsf page fragement to do some processing before loading region
But it seems to be not feasible approach because it is getting called every time any component on fragement gets partially submitted.
Is there any method which is called only first time when region is loaded ?
Or any other solution to achieve this.
Regards,
Devang

Hi,
don't think so. You would need a phase listener, but I don't see how you get it in. Wha about using a dynamic region and then use the method that is called from the dynamic region first time it is rendered?
Frank

When not using EJBs can I make BD a Singleton and cache facade instances?

Hi,
In an application which does not use EJBs can I make BD(Business Delegate) a singleton?
I was very sure about doing this but when I tried Google on the same subject the answers were'nt supportive of this but that was in the context of applications which used EJBs. And also item 4 in Effective Java isnt very supportive of caching Objects at the drop of a hat.
When not using EJBs would it be an unnecessary thing to make BD a singleton and cahce Facade instances in a BD and DAO instances in a Facade? I am planning to use a array based blocking bounded buffer for the purposes of caching. Or would it be better to make both BD and a facade as SIngletons and just cache DAOs in a Facade?
Any suggestion would be of good help to me.
Thanks a lot.

Not sure I understand all your design, but you seem
to describe an architecture where requests are queued
and handled serially.Sorry if I messed up while explaining it. No, it will not be handled serially. Since the BD is a singleton multiple threads can pass messages to it simulteanously, a bit like an object of the Action class in Struts. Since I dont see having any synchronized methods in a BD requests will be handled simulteanously.
The impact on throughput of handling requests
serially (as opposed to parallelizing them) probably
outweights by far the cost of instantiating one more
object per request...Yes, I understand that but as I explained above the reqests wont be handled serially.
To be more clear, I am thinking of using any one of these two things:
1) BD(Singleton)-->Facade(Singleton, caches DAOs in a thread safe data structure)
2)1) BD(Singleton, caches Facade instances in a thread safe data structure)-->Facade(caches DAOs in a thread safe data structure).
the thread safe data structure I am planning to have is a array based bounded buffer which blocks using wait and notify mechanism.
Thank you for the reply.

How do I turn off background ni file activity when not using Labview? files such as nimxs.exe, nipalsm.exe, nipalsm.exe, nisvcloc.exe, nicitdl5.exe

How do I turn off background ni file activity when not using Labview? I use labview rarely, and I also use my computer for demanding multimedia applications, including multitrack digital audio recording. I need to reduce as much background activity as possible, and taking a look with task manager I see files such as nimxs.exe, nipalsm.exe, nipalsm.exe, nisvcloc.exe, and nicitdl5.exe running even when I haven't used Labview (8 I believe). These files run even after I right click the NI icon on the lower right and turn off the application. I would like the computer to boot up without these files, and for the necessary files to be activated only when I start the program.
Can this be done or do I have to remove labview from the system to improve performance?
Thanks

Hello, those processes are part of running NI services that start when Windows boots. These processes serve varied purposes and stopping them can have undefined and unknown consiquences for your NI products. These products run at "normal" priority meaning that they should be preempted by any process running at a higher priority which I would expect your other application to be doing given their time sensitivity. That being said, in Windows XP (I can't speak for other OSes), you can lower their priorities even greater through task manager (right click the process»set priority) to further remove them from contention for resources. If you want to prevent them from running you can set the service startup type to "manual" in Control Panel»Administrative Tools»Services. Right click the process go to Properties and Under the General tab choose Startup Type»Manual. This will start up the processes only when something directly starts it up. LabVIEW will start these processes up as it attempts to use them. When you shut down LabVIEW you will need to manually shut down these processes through task manager. Again, doing this can cause problems with your NI products on your system and it is not advised.
Travis M
LabVIEW R&D
National Instruments

Is there any way to turn off airport without removing the electrical plug and should I unplug it when not using it??

I just got the 5G Airport Extreme base station. Set-up was a snap! Maybe 10-15 minutes compared to a friend who got another name brand for his pc and took a couple hours, even having to call customer support! Been working great so far, but am concerned about never turning it off, not only about the possibe harm that could be done to the unit, but also about having an active, open Internet connection 24/7. Before I got my Airport Extreme I was using Ethernet cable with a cable modem that could be placed on "standby" whenever I was not using my Mac for Internet, but since AE5G doesn't have a power switch on the unit, have left it turned on rather than unplugging it by the electrical cord. I did turn AirPort "off" in the menu bar when not using it wth my Mac, but AE is still apparently constantly active, showing a steady green light. Would there be any harm done by plugging it in only when I want to use Wi-Fi, then unplugging it?
Thanks for the help!

Would there be any harm done by plugging it in only when I want to use Wi-Fi, then unplugging it?
That is a matter of debate, since there are two schools of thought regarding power status on a router.
One school maintains that you can turn the device on and off as needed. Makes sense for some folks. The advantage of this is that it might save a bit of electricity, although the Extreme draws very little power most of the time.
Another school believes that there is a reason why Apple did not even place an "Off" switch on the device. It's designed to run 24/7.
Leaving the Extreme on will place far less stress on the electrical components in the device since they stay in an "idle" state most of the time, drawing very little current. Powering any electrical device up sends a sudden rush of current through the device, which places far more stress on a device than if it is simply left on.
It depends on your priorities. If you want to save electricity, your decision is already made. If you intend to prolong the life of the router, then consider leaving it on, as Apple intended.
A compromise position might be to leave the Extreme on most of the time and power if off for long weekends or vacation periods when you will be away. Remember that the Extreme must establish all new network connections every time that it powers back up....perhaps another reason to simply leave it on.

I can't download Adobe Acrobat XI Pro as a message states I am not using an up to date windows IE.

I can't download Adobe Acrobat XI Pro as a message states I am not using an up to date windows IE. I am operating Windows 8 Pro w/IE 10 installed. I just purchased the Adobe upgrade and would like to get it installed.

Firefox allowed me to download with no problem. Thanks,
In a message dated 12/1/2012 1:31:52 P.M. Eastern Standard Time,
[email protected] writes:
Re: I can't download Adobe Acrobat XI Pro as a message states I am not
using an up to date windows IE.
created by John Waller (http://forums.adobe.com/people/John+Waller) in
Downloading, Installing, Setting Up - View the full discussion
(http://forums.adobe.com/message/4889310#4889310)

X61 Hang when not using AC adapter

X61 will hang (on the login page, sometimes when using the laptop halfway), when not using AC adapter.I've format the system, install drivers (system update) and application.
anyone encounter this issue?

I notice if I disable Atmel TPM (from Device Manager), the system works normal when not connect to AC adapter.
I did not have most of the Lenovo software installed. Only have System Update, Fingerprint software & Power Manager.
Will there be any issue if I disable the Atmel TPM ?

ADF FACES: HTML template text Layout is broken when uses ADF Faces tags

This works fine:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<%@ page contentType="text/html;charset=windows-1252"%>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%>
<f:view>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252"></meta>
</head>
<body>
<h:form>
<table border="1">
<tr>
<td width="45%">
<h:dataTable rows="5" bgcolor="Red" value="#{class1.names}" var="name">
<h:column>
<h:outputText value="#{name}"/>
</h:column>
<h:column>
<h:outputText value="#{name}"/>
</h:column>
</h:dataTable>
</td>
<td width="55%">
<h:inputText/>
</td>
</tr>
</table>
</h:form>
</body>
</html>
</f:view>
=> a table is rendered with one row and two columns; in the first column the data table is rendered in the second the inputText
Changing to ADF Faces tags breaks the layout:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<%@ page contentType="text/html;charset=windows-1252"%>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%>
<%@ taglib uri="http://xmlns.oracle.com/adf/faces/EA11" prefix="af"%>
<%@ taglib uri="http://xmlns.oracle.com/adf/faces/EA11/html" prefix="afh"%>
<f:view>
<afh:html>
<afh:head>
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252"></meta>
</afh:head>
<afh:body>
<af:form>
<table border="1">
<tr>
<td>
<af:table rows="5" value="#{class1.names}" var="name">
<af:column>
<h:outputText value="#{name}"/>
</af:column>
<af:column>
<h:outputText value="#{name}"/>
</af:column>
</af:table>
</td>
<td>
<h:inputText/>
</td>
</tr>
</table>
</af:form>
</afh:body>
</afh:html>
</f:view>
=> at the begin of the page an empty table is rendered; below the data table is rendered and below the inputText
It think it should be possible to layout the page with HTML template text and use ADF Faces tags.

As of EA12 (and EA13) <afh:body> is what is known as a "rendersChildren" tag. It needs to do so in order to support partial-page rendering This means that template text inside it needs to be wrapped inside <f:verbatim>.
For later releases of ADF Faces, I've filed an enhancement request to loosen up this restriction for <afh:body>.

Should I disable wi-fi when not using it ? Will this preserve the Battery?

When I`m at home,should I disable the wi-fi when not using the internet ? Does this preserve the battery?

http://ipod.about.com/od/iphone3g/tp/iphone-battery-life.htm
#5 on the list to preserve battery:
Keep Wi-Fi Off
The other kind of high-speed network that the iPhone can connect to is Wi-Fi. Wi-Fi is even faster than 3G, though it’s only available where there’s a hotspot (not virtually everywhere like 3G). Keeping Wi-Fi turned on at all times in hopes that an open hotspot will appear is a sure way to drain your battery life. So, unless you’re using it right this second, keep Wi-Fi turned off.
Find it in Settings -> WiFi -> Slide to Off

Hi, I have an iPhone 4 which rings people when it is locked, whether or not in my pocket. I always lock it when not using it. Can anyone help? It is calling random numbers, not the last person or anyone even recently called on my recents list. Thanks

Hi, I have an iPhone 4 which rings people when it is locked, whether or not in my pocket. I always lock it when not using it. Can anyone help? It is calling random numbers, not the last person or anyone even recently called on my recents list. Thanks

Pay no attention to iinami, the amount of replies to people saying their handsets must have been jailbroken everytime iTunes throws out an error is tremendous. (Clearly you don't need to have any real knowledge to get to level 3 on these forums, let's hope apple's geniuses know a lot more than some of their customers.)
http://support.apple.com/kb/TS3694
Solution below.
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

Ive just subscribed to itunes match. do i need internet access to play tunes when not using my home broadband?

ive just subscribed to itunes match. do i need internet access to play tunes when not using my home broadband?

On an iOS device yes unless you pre-download the music. On your computer no, unless you decide to delete the tracks from your iTunes library. The latter is not recommended without having a full backup of your muaic files.

Should I unplug my AE when not using it for months at a time?

should I unplug my AE when not using it for months at a time?

Yes, in my opinion.....unless you really like to have a green light "on" all the time.

Firefox crashes - even when not using the computer

Firefox crashes - even when not using the computer
Sometimes I can walk away from the computer and only have one tab open (e.g. Facebook) and when I come back to the computer a few hours later, Firefox has crashed for no reason.

Unfortunately the linked crash report is empty (@ EMPTY: no crashing thread identified; corrupt dump) and doesn't include any data, so it is not possible to find the cause of the crash.
Did you recently submitted other crash reports that were submitted and show a crashing thread?
See:
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.org/kb/Firefox+crashes
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If the new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Validation messages in JSF (when not using ADF faces)

Similar Messages

Maybe you are looking for