Validation not working during Mass Change of Vendor Line Items
Hi All,
I created validation for Reference Key 1 field of Vendor line items, in this validation i used customized user exit.
Whenever i select multiple line items in FBL1N for mass change & try to put a unauthenticated value system gives error as per Validation only for 1 st item but it not work for subsequent items & put the unauthenticated value in subsequent line items.
I am not able to understand why Validation is working only for 1st line item during mass change & not for subsequent line items.
Please provide your suggestions in resolving this issue.
Thanks
sandeep
Hello Sandeep,
I understand your issue. First check if the changes as per the SAP Note 640908 (https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=640908) is available in your system.
Actually, Mass changes call FB02 in background and at this stage Validation gets activated and hence, the control doesn't go back for the next item changes. You can test this by deactivating the Validation and then the mass changes will me fine.
I hope this explains the behaviour.
Thanks and regards,
Suresh Jayanthi.
Similar Messages
-
Mass change of Vendor Line Items Payment Terms
Hi all
We are trying to make a mass change of payment terms for vendor line items. We have implemented the change required as per SAP note 640908. However when we try to do this not all payment terms are changed.
The log gives us the following error - 'Field BSEG-ZTERM. does not exist in the screen SAPMF05L 1302'.
Please how can we solve this error.
Many thanks
PRGHi,
According to note 640908:
" Notes on error handling:
If the mass change does not occur as required even though you
changed and activated all program parts, note that the error log
for the mass change (Environment -> Mass change -> Error log of
line item list) may contain useful information for error
handling."
" Note: SAP cannot guarantee that the modified mass change will work
correctly even if you carry out all of the steps as described in the
manual tasks."
It is not planned to enter the payment terms by using of
the field payment term ZTERM but by using of the fields ZBD1T/ZBD1P and
ZBD2T/ZBD2P and ZBD3T.
With Best Regards,
Gladys Xing -
Mass change on vendor open item.
Hi
We have a requirement to change the payment terms for all vendor open items to 60 days, to do mass change i selected few open documents and click on enviornment and mass change and new values but here payment terms field is not there.
I thought i need to add to the line layout under special fields then i did that even then payment terms are not showing under mass change > new values field under environment but showing as line layout.
Is there a way to solve this as we may have more than 100,000 open documents for all vendors within the company code.
Will assign good points.
Thanks
KumHi
there is no need of payment term to be changed.
If the Payment term is Payable immediately Due net or Blank in the Open Item, simply change the Base Line date for each open item,give date as of 60th day.then system will pick those line items only after 60 days.
Go for LSMW or BDC to Update the field in those line items.
Regards
Venkat -
Withholding tax not able to view in FBL1N - Vendor Line Item report
Dear All,
The VI documents are posted in different vendors. The Tax code has been duly selected and tax was deducted at the time of posting the entry. When we generate the list of vendor line items using standard report FBL1N, we observe that only some of the VI documents in the output show the withholding tax amount in the respective column whereas in some of the VI documents, the withholding tax amount is appearing as zero even though the tax line item is available in the document (same can be seen in FB03).
Please let us know the possible cause for the same.
Regards,
Anand.InguvaDear,
by FBL1N is not possible to check the Extended WT
information due to the technical reasons explained into the note
number 363309.
Furthermore please be aware that by the report RFKQST00 and
RFIDYYWT You can have all the WT details.
I hope this helps You.
Mauri -
[FB4/AIR] Resize transition not working during state change
I am using a resize transition between two states. The first time the state is changed the resize transition doesn't seem to execute, but merely jumps to the new size. The issue I am experiencing is similar to this post - http://aralbalkan.com/2177. This is somewhat different as it's a title window and explicitWidth and explicitHeight are not available. Each subsequent time I change states during the same session, the transition plays fine, it's just that first initial state change.
Any suggestions?
Thanks.Moving to Flex forum http://forums.adobe.com/community/flex/flex_general_discussion
-
Changing Vendor Line item text @ FB03
Hi Gurus,
When running MEB4 (Rebate Settlement) it'll create Accounting Entries that can be seen @ FB03... My problem is how to change the vendor line item text at FB03 upon running MEB4.
Thanks in advanceHi,
You can use FB02 to change the vendor line item text.
Regards,
Vinod -
Automatic Business Area Derivation Rule for Vendor Line Item in MIRO
Hello Experts,
We trying to use Business Area concept for our client.
I have completed all configuration setting for the business are derivation like
1. Creation of Business Area
2. Assign Business area to Plant / Division (OMJ7)
3. Business area determination from sales area (TVTA)
4. Business Area by Sales Area
5. Checked Field Status Group for Customer and Vendor Reconciliation Account
It is working for for compelete sales process and in Procurement cylce it is picking business for MIGO transaction both the line items.
But
In MIRO (Purchase invoice posting) it is automatically taking Business area to the GR/IR line item and it not taking Business area for the vendor line item (automatically)
I comes know that there is a business area derivation rule for this to happen automatically.
Can you please propose the soulution for the automatic derivation of business in MIRO for vendor line item.
Regards,
ChalapathiHi,
I do mot think there is a BA derivation rule for MIRO.
The best you can do is:
1. Use a user exit or enhancement point for deriving the BA from the GR/IR line and populate that in the vendor line
or
2. You make BA as a mandatory field in the field status group for the vendor reconciliation account. This will then force the user update the BA. We use this option. This is so because at times, the vendor item may need a different business area than the GR/IR line.
Cheers. -
Issue with PO change output - Service line items
Hi All,
This is issue with PO change output. We have PO with line item 10, 20 and item 10 has 4 service line items. PO is approved and initial print out is taken.
Some one goes and makes changes to 1st service line items of PO line item 10.
A change output gets triggered. When this output is printed, it prints line item 10 details. This is standard functionality as this item is changed. But its printing all the service line items for this PO line item. Consider a case where there are 3000 service lines for a PO item. If I add 1 service item to this PO line item, the change form prints 3001 services for that line item. There were no changes done to first 3000 service line items.
Currently PO change form takes care of changes at PO line item but it does not take care of changes at service line item level.
Is there any setting that needs to be done for this so that it only considers the changes at Service line item level also.
Regards,
ShahuIf you're using a standard form, send a message to SAP. Otherwise make a change in the form.
-
Validation not working when clearing an open item
Hi SAP Gurus,
We have a interesting scenario to discuss with you. We are using Legal Dunning Procedure so once legal action is intiated against the customer notifications are sent to the legal department if payments are received.
Unfortunately this can happen only during the next dunning run which of course can occur in varying time intrevals. Therefore we need a validation to occur if a payment is received from a customer against whom legal action has been initiated.
We tried using the following fields Date of the legal dunning proceedings, Dunning block, Dunning key, Dunning level but are not able to get the validation to work when attempting to clear the open item. These all work when trying to post a new document but fail when trying to clear a open item. Points will be given for helpful answers.
Regards,
Sivathis is the radio button
<af:selectOneRadio value="#{bindings.Gender1.inputValue}"
label="#{bindings.Gender1.label}"
required="#{bindings.Gender1.hints.mandatory}"
shortDesc="#{bindings.Gender1.hints.tooltip}"
id="sor5">
<f:selectItems value="#{bindings.Gender1.items}" id="si7"/>
</af:selectOneRadio>
i use this sample
http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/ADF_Insider_Essentials/ADF_Insider_Essential_YesNoRadio/ADF_Insider_Essential_YesNoRadio.html -
Mass Change Of Vendor Code in Purchasing Info Records
Hi All,
I have one query and I already search a lot for it but didn't find any specific solutions.
I want to change a vendor code in around 1000 Purchasing Info Record, I had already tried for Mass Maintenance Through T. Code - MEMASSIN, But I found Vendor field in New Values as Grey Field.
Is there any other way to mass change of Vendor in Purchasing Info Records.
Why vendor field is showing me as a grey Field?
Thanks In advance
With Regards,
Patanjali BhagatHi Govardhan,
Pl correct me if i am wrong....EINA-RELIF field is to check and uncheck for regular vendor...It will not change the vendor ID...
EINA-LIFNR...is the field to change vendor no.., but i can not see this field name is not there in the table...
Still i think that we can not change the vendor id's once it is created for Info record...
Pl correct me if am wrong.
Uts -
I turned of iMessage and now I want it back on and it's not working, I have changed my password and now I don't know what to do. Is there something obvious I am doing wrong? I have done this on both of my iPads and it hasn't let me go back on to iMessage on either of them.
iCloud System Status
Current
iCloud: iMessage - Users Affected: Some
11/18/2012 13:34 PSTUsers are unable to use iMessage. Normal service will be restored ASAP.
iCloud: FaceTime - Users Affected: Some
11/18/2012 13:33 PSTUsers may be unable to place FaceTime calls. Normal service will be restored ASAP.
http://www.apple.com/support/icloud/systemstatus/ -
I have the iPad 2 16GB, bought it in August 2011, I worked perfectly but in mid-August 2012 I took her to the store because the microphone did not work reviewed and changed me, but to my surprise that the new iPad had the problem is disconnected WIFI signal I have to be glued to the router, and I did everything he says is supported by the Apple and all other pages and forums regarding this problem is not solved and always disconnects when connected always disconnects again!! passing will be settled as no longer factory warranty although it has neither the three months I renewed new, please help because the investment has been great and I can not use only as "a mirror" I'm waiting a true solution, thanks ....
Sincerely,
CatlosThis does help me because I am pondering on wether to buy an airport extreme to solve my ipad 2 connection woes. I have an extremely old router dLink 524....but I have NEVER had any problems with it at all ever. My xbox connected great to it and netflix ran flawless through my xbox.....now I have an ipad2 and an apple tv and they are BOTH having horrible connection problems. I have read most of the forums on how to fix it by changing the settings on my router but since mine is so old I couldn't do some of the suggested solutions. So here I am debating on whether to spend all this $ on an airport extreme? I am just hoping that if I go and purchase this, my connectivity issues problems will go away like yours did. Just wondering if you have ATV as well and if the AE solved its problems? I have read about AE solving ipad2 wifi problems, I'm just hoping it will solve my ATV as well.
**Glad they didn't "moderate into extinction" your post yet, lol, Thank -
Client Side Javascript Validation not Working in Struts 1.x version
hi,
I'm following the steps provioded in the below link for Javascript Client side validation but still it is not working.I'm struggling to get this work.
[http://www.visualbuilder.com/jsp/struts/tutorial2/pageorder/9/|http://www.visualbuilder.com/jsp/struts/tutorial2/pageorder/9/]
"The framework automatically generates the browser specific JavaScript and validate the data only at the client side."From the above statement i undertstand that framework itself generates the javascript function for validating the field mentioned in validations.xml file so that we dont have to explicitly write a javascript function for
validating the fields
(or)
Do we need to call an explicit function
Please need help on this.
I have followed all the steps mentioned on the above link but Client Side Javascript Validation not Working in Struts 1.x version....
Thanks and Regards,
DeepakHi,
Please find my steps below....still getting an error.
2> which version of commons-validation.jar needs to be downloaded ...Link please
downloaded the latest commons-validation.jar and placed in lib.refreshed the project,and did a build.
3> which DTD name to be specified in "validator-rules.xml" which is in accordance to commons-validator.jar file.
validator-rules.xml ::
<!DOCTYPE form-validation PUBLIC
"-//Apache Software Foundation//DTD Commons Validator Rules Configuration 1.0//EN"
"http://jakarta.apache.org/commons/dtds/validator_1_0.dtd">validation.xml:
<!DOCTYPE form-validation PUBLIC
"-//Apache Software Foundation//DTD Commons Validator Rules Configuration 1.0//EN"
"http://jakarta.apache.org/commons/dtds/validator_1_0.dtd">
i did as u said and im gettiong the below errorNov 5, 2009 4:33:08 PM org.apache.struts.validator.ValidatorPlugIn initResources
SEVERE: Invalid byte 2 of 2-byte UTF-8 sequence.
org.apache.commons.digester.xmlrules.XmlLoadException: Invalid byte 2 of 2-byte UTF-8 sequence.
at org.apache.commons.digester.xmlrules.FromXmlRuleSet.addRuleInstances(FromXmlRuleSet.java:139)
at org.apache.commons.digester.Digester.addRuleSet(Digester.java:1610)
at org.apache.commons.digester.xmlrules.DigesterLoader.createDigester(DigesterLoader.java:89)
at org.apache.commons.validator.ValidatorResourcesInitializer.initialize(ValidatorResourcesInitializer.java:122)
at org.apache.struts.validator.ValidatorPlugIn.initResources(ValidatorPlugIn.java:238)
at org.apache.struts.validator.ValidatorPlugIn.init(ValidatorPlugIn.java:181)
at org.apache.struts.action.ActionServlet.initModulePlugIns(ActionServlet.java:1036)
at org.apache.struts.action.ActionServlet.init(ActionServlet.java:455)
at javax.servlet.GenericServlet.init(GenericServlet.java:212)
at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1139)
at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:966)
at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3996)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:4266)
at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:760)
at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:740)
at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:544)
at org.apache.catalina.startup.HostConfig.deployDirectory(HostConfig.java:927)
at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:890)
at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:492)
at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1150)
at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:311)
at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:120)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1022)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:736)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
at org.apache.catalina.core.StandardService.start(StandardService.java:448)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:700)
at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:295)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:433)
Need help forum members.....
Please reply to my question 1 which has been asked before as belowDo i need to write explicit javascript function for validation in Struts (or) struts generates the javascript function by itself.??? Please explain with an example....
Edited by: Deepak_A_L on Nov 5, 2009 4:37 PM -
Microphone not working during call
microphone not working during phone call. both microphone and headphone mic not working during normal phone call. microphone works during facetime call. any suggestions?
Hi there naxster,
You may find the troubleshooting steps in the article below helpful.
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
-Griff W. -
PO no not reflecting in GL/ Vendor line item display
Hi Guys,
Please let me know that why PO no (column is displaying but) data not reflecting in GL/ Vendor line item display using TCode FS10N? What may the possible reasons and how I can get the data flow in the column?Hi Amit,
You are right and I've changed the layout. I've already said that the field displaying there but data is not flowing in the field. I mean to say that PO no is not reflecting in the specified field. However I am able to get the PO no. in Assignment field. What may be the reason and how I get the data (PO no.) in this field?
Maybe you are looking for
-
Display port Dual link DVI to Gateway XHD3000
The *displayport to dual-link dvi adapter* I bought doesn't seem to work with resolutions > 1920x1200. My Gateway XHD3000 monitor supports upto 2560x1600 but I can't set this resolution in the system preferences. I have set my power setting to "+Bett
-
A few weeks ago forwarded messages with pics and other messages with attached photos gave long strings of HTML text code instead of the I tried sending them to different viewers and got dialog boxes saying the file can't be read. All of them were fro
-
How to use File Adapter in BPEL
Hi, How to use File Adapter in BPEL. I am using Oracle SOA 10g. Any sample or best example in blog or elsewhere ?
-
I just got a ipod touch (used) and how long will it take to sync with 126 songs?
i just got a ipod touch (used) and i restored it and now its syncing my old music into it. but its been taking a few hours. all it sais "step 1 of 4" and "backing up"
-
Make a picture fit the full screen when published?
I can´t seem to get my picture to fit the full screen when I publish it. There are some alternatives. To drag the picture into the canvas and enlarge it. Drag it into the Page background or drag it into the web browser background. Iv tried them all a