Valuatiopn type in material master

HI Friends,
Valuation type not selected while material master created and now we want to update valuation type for same material ,please tell me how we update valuation type for the same  material .
Thanks,
Dharmveer

hi expert,
goood morning
as i have some problem with material creation by using bapi and rfc
as i am able to create material by using  BAPI_MATERIAL_GETINITNUMBER
                                                                BAPI_MATERIAL_SAVEDATA
THE THING IS I MATERIAL HAS BEEN CREATED
AND I NEED TO EXTEND THIS TO VALUATION TYPE ITS IS NOT GET UPDATED IN MBEW TABLE.
AND WAT DO I NEED TO GET UPDATED THAT FIELD IN MBEW
AND WAT FUNCTIONS R WAT SELECT STAMENTS DO I NEED TO USEE
PLEASE
SEND ME REPLY AS I AM WAITING FOR REPLY
THANK YOU
REGARDS
PRABHANJAN
prabhanjan.g06 at g com

Similar Messages

  • Kindly give authorization object for mrp type in material master

    Hi friends,
    Kind tell me what is the authorization object for MRP type in material master.
    Your help is considered more important.
    thanks in advance
    willaims

    hi,
    check your authorisation objects here:
    Go to PFCG --> Environment (at menu bar) --> authorization objects --> Display...
    Here see for MRP and MM for material managament in the tree structure...
    Regards
    Priyanka.P

  • Valuation type in material master

    Dear SAP GURU'S
    please tell me what is a valuation type, it's uses and what are it's setting so that i can get the valuation type in material master.
    thanks and regards.

    Hi Yogesh ,
    Valuation type  is A subdivision of a valuation category in split valuation.
    Example
    An enterprise manages its stocks of a material using the valuation category "Quality", comprising the following valuation types:
    High quality
    Average quality
    Inferior quality
    Valuation category: A criterion for the separate valuation of different stocks of a material managed under one material number for quality and other purpose ...
    If you have any further query on the same then let us know ........
    Thanks
    Kaushik

  • Message Type for Material Master Data Changes

    Hi all
    I'm managing Message Types for Material Master Data extraction from R\3 system to BW system, in order to load on BW only the changes done to some fields of MARA table that are delta relevant.
    Now from R/3 BD50 Transaction I can see that there is a message type that refer to changes done on MARA fields: RS0044.
    I would like to replace this message type with another one (RS0020) in order to align different systems.
    Now changes to material master data in R/3 system are recorder with both message types but only those with RS0044 message type are processed and loaded into BW system.
    So I would like to know:
    1. How is the message type related to the DataSource 0material?
    2. is it possible to replace a message type for BW?
    3. if yes, how can I do it?
    Thanks in advance.
    Elisa
    mail: [email protected]

    Hi Oscar!
    At the moment I'm using Delta queue of 0MATERIAL. I know that in the queue there are all the new and changed records.
    But I would like to be able not to load all the changed records, but only those that refer to some fields of MARA table.
    E.g. if the gross weight of a material is modified I don't want to load this change on BW with Delta loading .
    I've seen that from R/3 Transaction BD52 you can set only delta relevant fields referred to a specific message type and to delete the other fields.
    As I'm able to do this directly in the Development system and Test System, I haven't got the authorization of doing it in the Production system.
    That's why I need to include this setting in a CR and then ask to transport it from Test to Production system.
    But message types referred to MARA field changes are different between the two systems.
    And it seems they are automatically created.
    Is it true?
    Thanks
    Elisa

  • Adding a new long-text type to Material Master

    We need to add a long-text type to Material master, in addition to Basic, Inspection and Internal comment texts.
    What would be the best way to do this?
    Is there configuration that will allow the generation of a new tab in MM01 - Additional data screen, along with Basic, Inspection etc or should we create a new Screen exit for the new Text type to be edited?
    If a screen Exit is available could you please name it?
    Thanks a lot for the help - in Advance.

    Hi,
    You can add your own tabstrip in material master and put your long texts on it.
    Please have a look at transactions OMT3C, OMT3B, OMT3E.
    All customizing for material master extention can be found in SPRO -> Logistics - General -> Material Master -> Configuring the Material Master.
    Krzys

  • Deactivate inspection type from material master

    Dears
    i have a inspetion qty with satus LTCA CHCR(Cancelled inspection lot)
    Now i need to deactivate inspection type from material master
    system not allowing to deavtivate as inspection lot was there
    how to remove the insepction qty form system
    Any tips
    Faisal

    Hi Faisal,
    Hi Faisal,
    Try this way,,,
    Run QA08
    Enter the Plant, Material Code
    Then go for the Fourth tab "Mass Processing"
    Activate the check box for Activate Despite Inspection Stock and Create Change Documents
    Then insert the inspection type.
    Execute
    System will prompt a screen similar to Inspection set up from MM02, there deactivate the inspection type and press Enter.
    Select the Line item and Save.
    Pls let me know if doesn't work.
    Regards,
    Shyamal
    Let's do it again, When you complete the following steps, are you getting any list of materials there? after completing it up to
    System will prompt a screen similar to Inspection set up from MM02, there deactivate the inspection type and press Enter.

  • Need to create a Store Business document type for material master and store a sharepoint link

    Hello,
    I need to create a Store business document type for material master and store a URL link . How do I do that?( or is there any functionality to upload a document for a  store business document that it will automatically saves to sharepoint?)
    Thanks,
    Ran.

    >
    dhayes12 wrote:
    > A)  When I do the (Material Backflush) MFBF for the 04 type, the Inspection Lot gets created OK.  I then can go into QA32 and assign the correct Inspection Plat by clicking the Inspection Lot button.
    >
    > B)  When I do the MIGO via the Purchase Order (type Z01), it will not create the Lot if I have the Multiple Specs selected in the QM Material Master MM02.  If, I turn off the Multiple Specs in the QM Material Master and create a new PO and MIGO, it will create the Lot, however, it automatically assigns the lot to the wrong Inspection Plan (2nd Plan see above)  I need to be able to select the plan like I can with the 04 type.
    >
    > Is their some setting that can be changed in Config or somewhere that acts the same way as example A above?
    For case A, create insp plan with usage "1- production" If you have one IP with this usage for given material then system will assign Plan to lot automatically. In your case for second plan update usage as 1.
    For case B, system should assign 1st plan make sure for both plan udage is correct. for 1st plan usage should be 5 while 2nd plan usage should be 1. Now if your 1st have status 4 and key date before lot date then system will assign plan auto.
    Thanks!!!

  • Maintain Text Types in Material Master

    Hi,
    Is it possible to maintain different text types in the materials master "Sales text" tab just like we can maintain at the sales order header and item levels.
    In VOTXN there is no option for configuring text types for material master (text object MVKE) so I was wondering that if it is possible at all. Please let me know if you have any idea on the same.
    Regards
    Deepak

    Hi Deepak,
    In Material Master you can maintain the "Basic data text". It can be maintained in Basic data 1 view by selecting the Additional data. This text can also be fetched according to your requirement with the help of developer.
    Thanks,
    Sravan

  • TCode for collective changes in inspection type in Material Master

    Hi
    Can any one tell me the TCODE for mass changes for inspection type in Material Master.
    Charuhas

    you can use MM17 or through LSMW or create a BDC through ABAP.
    Regards,
    qsm sap

  • How can we update insp. type in material master on mass basis.

    Hi Team,
    We are using LSMW for material master. I was told that we can not update inspection type  through LSMW. Is it possible thru LSMW if not, how can we update insp. type in material master on mass basis.
    Is there any T-Code to update mass chages for inspection type in material.
    Please suggest.
    Thanks

    Hi,
    You can use  TCode -QA08.
    This Tcode have facility to Inspection Type activation in single  / mass material.
    Also useful for deactivation, special setting at Inspection Type level.
    Regards,
    JM

  • Authorization material type in material master

    Hi expert,
    I want to know how to restrict users to create/change Material Master following
    the material type in the role.
    In role authorization Object: M_MATE_MAR Material Master: Material Types.
    I maintain material type like ROH , HALB , HAWA in authorization Group.
    But it is not work. Please help me.
    Thanks,

    Hi,
    Pl. check your role to users for the material master again for allowed material types. It should restrict the users only for the selected views only. This should be done for all the roles assigned to users in relation to materail master. (i.e. Create, Display & CHange). If you restrict the material type in create role only & it is not restricted in display role, then user will be able to create all the material types. hence restrict the material types in all roles related to material master (create, change, display) assigned to the user.
    Regards,
    Prashant

  • Multiple class types for material master classification display default.

    Hello,
    We are running on R/3 4.7.  We use several different class types for our material masters (001 and Z01).  The problem this creates is the end user having to constantly tell the system which class type to use when going to the classification screen for different materials with different class types.  If a user views one material's classification page with a particular class type (001) then looks at another material with a different class type (Z01) the system tries to pull in information from the last materials class type (001).  The system tells the user there are no assignments for the class (001) in the material their viewing but there is one for class type (Z01).  The user then has to select the class type that applies to the material master their trying to view.  Is there a way for the system to automatically see when a material has only one class type assigned to it for it to automatically default it in without the user having to specify the class type?
    Thanks,
    JRW

    Hi,
    Check the configuration, have you maintained default class type for material type.
    Logistic General> Material Master> Basic Setting> Material Type> Define attributes of Material Types>Select the material type> Double click on material type--> Class type
    Edited by: P. Dhamane on Jun 4, 2010 3:21 PM

  • Tax conditon types in Material master

    Friends,
    We have assign  tax conditon types (CST & LST) to country now when we create material thsese condtion types are coming in material master.
    We want to restrict these condtion types when user create material in the plant whihc is in US. How we can do it?
    Plesse help on thi
    Thanks in advance

    Hi,
    u can solve this problem using Authorization management.
    please consult yout BASIS consultant to procvied the necessarey authorization.
    regards
    ravi

  • How to un hide Industry type in material Master - mm01

    Dear All Experts
    Kindly help to unhide Industry Type field in Material Master .
    Regards
    Alok

    Edited by: Sridhar Jayavarapu on Aug 4, 2011 5:17 PM

  • Multiple Class Type for Material Master

    Hello Everyone,
    I would like to ask where in configuration can I setup Classification so that for each Material Master it can have Multiple Class Type. (such as 001 - Material Class, 023 - Batch, 300 - Variants).  Because currently I can only see 023 - Batch whenever I create a new Material Master.
    Thanks.

    Hi,
    Check the configuration, have you maintained default class type for material type.
    Logistic General> Material Master> Basic Setting> Material Type> Define attributes of Material Types>Select the material type> Double click on material type--> Class type
    Edited by: P. Dhamane on Jun 4, 2010 3:21 PM

Maybe you are looking for