Value & is not permitted for attribute Sales Unit - Material Object

Hi gurus,I would very much appreciate expert advice on how to solve the problem I´m facing when lauching middleware object MATERIAL.
I have 2 BDocs in red showing the following error:
Value B20 is not permitted for attribute Purchase Order Unit
Value B20 is not permitted for attribute Sales Unit
I have checked table T006 and customizing and I do have unit of measurement B20 created on CRM so I don´t understand where is the error.
Could you please help me?
Thanks in advanced,
Regards,
Lorena.

Dear Lorena,
Many Thanks.
ok, I need to do manually in the CRM system. I have one question
1: If any changes in the ERP system the data is automatically replicated in to CRM system right? then Why we need to Configure again in the CRM system. for Examaple: Proudct group and Tax.
2. No, I did not replicate Sales Org., but this is also automatically replicated into CRM system. But it is already replicated into CRM i.e. Initial download.
my question is in r/3: If one customer have 2 Sales Area data is maitained in the R/3, that information is also available in the CRM side. if one more sales area is assigned to same customer, that information is also availbale in the CRM system right? but I could not able to find the new sales area data. what is the reason? and how I can dowload the changes in the CRM system?
I realy thanks to you, providing most valuable information and supporting to me.
kindly provide me where should I promote points to you.
I will try and let you know, if I am getting any problem, I will ask you again.
Thanks and Regards,
Jags

Similar Messages

Value . . is not permitted for attribute Date of Manufacture Message no. COM_PRCAT020

Hi
We are using CRM 7 ehp2 system we are facing a problem some equipment number is not updating from ECC to CRM.
showing following bdoc error message.
Value . . is not permitted for attribute Date of Manufacture
Message no. COM_PRCAT020
Diagnosis
You want to specify that the value . . is allowed for the attribute Date of Manufacture. However, in attribute maintenance or in the higher-level category ('parent category'), you specified that the value . . is not allowed for this attribute.
Error when creating objects
Message no. IB_CRM_UPLOAD_MSG019
Error when creating products from equipment BDoc
Message no. IB_CRM_UPLOAD_MSG012
Error when creating objects
Message no. IB_CRM_UPLOAD_MSG019
Error calling the upload BAdI; method: perform_load
Seeking your help for resolving this issue.
Best Regards
Manoj

Hi Manoj,
Refer to the KBA 1880999
This should be useful in resolving the issue.
Best Regards,
Gervase

Error when replicating material master - Value not permitted for PO Unit

Hi all,
I am having the following issue. I am trying to replicate material master from ECC 6.0 to CRM 5.0, but I am getting an error to which I am not being able to find the solution:
Value GFO is not permitted for attribute Purchase Order Unit
    Message no. COM_PRCAT020
Diagnosis
    You want to specify that the value GFO is allowed for the attribute Purchase Order Unit. However, in attribute maintenance or in the
    higher-level category ('parent category'), you specified that the value GFO is not allowed for this attribute.
I tried to find where to edit this attribute in Customizing, and also in tcode COMM_ATTRSET, but I have no idea if this was the right direction.
Has anyone faced this issue before? I would really appreciate any help, since this is preventing me from completing material replication.
Thanks in advance.
Best regards,
Joã

Hello Sudipta,
I checked the attribute in COMM_ATTRSET, but there aren't any specific values for it. There is a value table T006, which I believe is standard, and it contains UoM GFO.
With this being the case, the error I'm getting makes even less sense to me...
Can you tell me if in there is any other place in CRM where we can set UoM?
Thank you, once again.
Regards,
Joã

Value 'defaultNs:AddBP2Type' is not allowed for attribute 'type'

Hi All,
I created the wsdl for mobile and I tried to send a SOAP request from Altova XMLSpy. However when I geive the wsdl in 'wsdl file location' I receive the following.
File http://127.0.0.1:8080/B1iXcellerator/exec/dummy/com.sap.b1i.vplatform.scenarios.setup/vPac.sap.B1Mobile/001sap0003_sap.B1Mobile.wsdl is not valid.
Invalid XML schema: 'Value 'defaultNs:AddBP2Type' is not allowed for attribute 'type'.'
Error location: wsdl:definitions / wsdl:types / xs:schema / xs:element / @type
Any Idea?
Vangelis

Hi,
it seems that Altove did not cope with defaultNs prefix that is used for marking default namespace.
just look up in your <xs:schema > tag what namespace prefix is used for your namespace - you shall find there something like this
<xs:schema xmlns:ns0="your.namespace.com" xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified"
and replace prefix defaultNs with prefix of your namespace (in example above it would be ns0)
There might be several usages of defalutNs iside of WSDL (at least in my case were two) so replace it everywhere using same approach
Best regards, Artem

Error message: The item category 'ZTPS' is not permitted for product '134'

Hi experts,
When I try to create a sales order in CRM, I find the error: "The item category 'ZTPS' is not permitted for product '134'".
how can I solve this problem?
thank you for helping me,
Marco

hi,
I tried to perform the "define item category determination" activity, but the problem is that the possible entries for "Item category groups" and "Item usage" are different in the two systems:
for example in R/3 I find some entries with Item Category group = LEIH (returnable packaging),
when i try to insert this Item category group in CRM i press f4 to see possible entries but Ican't find the value LEIH.
how is it possible?
THANK YOU!
m

Rate and accessable value is not displaying for the tax invoice output

Hello All,
Rate and accessable value is not displaying for the tax invoice output. Rest of all outputs for invoices shows Rate and accessable value.
Scenerio is free of charge sales order (samples) removing the goods from pant so excise invoice has been created and also updated. but for tax invoice out put rate and access value is not displaying.
Pricing procedure: In pricing procedure account keys have not been maintained because there is not gl account upadation during billing for free of charge delivery.
Thanks & Regards,
ramesh

hi Gurpreet,
You can add values to that transient column programatically,either by getiing the row from the iterator and then row.setAttribute('Column_name','Value');
Or providing value to it in the SQL...

"Drilldown characteristic" not permitted for display hierarchy

Hi Experts,
I want to display the hierarchy in my BEx Analyzer for which i tried to activate the hierarchy for the same and got the below error.
"Default values "Drilldown characteristic" not permitted for display hierarchy"
Also I have used a standard variable for this infoobject and it is used for user input in the selection screen of the report.
Eventhough we proceed further with this message, in the Report display, it is not showing the hierarchy in the display.
Please respond ASAP.
Rgds
Kumar

Hi,
I don't know why you are getting this error. But we can create hierarchy either by using herarchy name or else by creating hierarchy variable......In characteristics for which you are creating hierarchy, in display tab of properties give DISPLAY AS KEY, SORT CHARACTERISTICS -- AS IN THE QUERY and RESULT ROWS --- ALWAYS SUPPRESS....
In HIERARCHY TAB --- Give Hierarchy name select use hierarchy setting check boxand select always show radio buttons......
Do in this way and it may work......
Regards,
Kalyani.

Error not permitted for charecteristic product

Hi All,
when i assign a product to a campaign i am getting an error that says
" Value 426B202D64EA13EBE1000000C23759EE is not permitted for characteristic Product"
Any idea how to go about this error.
Rg,
Surender

Resolved. Downloaded customizing object DNL_CUST_SPROD.

An entry in field Funds Ctr is not permitted for account 401000 Message no F5394

Hi Friends,
I have done Fund Management configuration and while posting the document through FB50, I am getting error message " An entry in field Funds Ctr is not permitted for account 401000 "Message no. F5394 and I also checked Field status and Posting keys for Gl account and everything looks fine..
Please help on this..
Thanks
Goutam

Hi,
please check the message the error will give you the table number or Programme name
go to SE38 for programme and for table SM30
system will show where is the exact error facing.
thanks

Values are not getting updated in sales report

I have configured sales information system, and i have been trying to run sales report but values are not getting updated in sales report, System will through message that no data exists.
regards,
thooyavan

Hi,
Please check with the Customer and Material Statistics group in the Customer and material master respectively.
Further check with the LIS settings (Sales Area combination with the Update group).
Reward points if this helps you.
Regards,
Harsh

An out-of-sequence check is not permitted for payroll type B

We had to do advance payments for 4 pay periods for an employee through offcycle workbench. One of the checks was wrong so we had to reverse it. It is an out of sequence reversal. Now when i try to do a correction run , it gives me an error An out-of-sequence check is not permitted for payroll type B
How can i run the correction run now. Please help
Edited by: sagarika sharma on Aug 14, 2010 6:29 AM

Check with SAP note 1425764,696067 and 1127119.
Mohan

TANN item category item not picking for return sales order

Hi all,
I have a question regarding TANN item category. This TANN item category item is not picking for return sales order type. As far as i know RENN is the free goods for return sales order. Can you please clarify the above question further

Hi
If you are making return order by copying sales order then please see this procedure also.
Try to check in the copy control also.
Go to the following path IMG u2013 Sales and Distribution u2013 Sales u2013 Maintain Copy control for sales documents. (Tcode VTAA)
Select copying control : sales document to sales document.
Search your return delivery order from the reference sales document type.
Then select the item from the left side Colum.
Go and find out TANN item category and click on detail.
Check out Item Cat proposal. If it is empty then type your RENN condition type over here.
Now try to create the return sales order it might work.
Raj.

Report Painter values are not populating for a particular cost center

Report Painter(GR55) values are not populating for a particular cost center for the months of April 1 2011 where as for May onwards values are displaying correctly..We have check the transaction code KSB1 for this cost center there are some values posted for the period of April..
Can any one help me to find out where exactly the issue is and how to resolve the same..

Please check your variables in your report.

Idoc-51:Accounting transaction not permitted for posting in FI/CO

Hi,
Message type FIDCC2
Basic type FIDCCP02
Process code FID2
When i try to post for F-02, through WE19, above idoc, it is showing the 51 error: Accounting transaction not permitted for posting in FI/CO
I'm using the following fields:
E1FIKPF : FI Document Header (BKPF)
BUKRS : Name of global company code
GJAHR : Fiscal Year
BLART : Document Type
BLDAT : Document Date in Document
BUDAT : Posting Date in the Document
MONAT : Fiscal Period
TCODE : Transaction Code
WAERS : Currency Key
HWAER : Local Currency
E1FISEG : FI Document Item (BSEG) -1
BUZEI : Number of Line Item Within Accounting Document
BSCHL : Posting Key - 40
DMBTR : Amount in Local Currency
KOSTL : Cost Center
HKONT : General Ledger Account
WERKS : Site
E1FISEG : FI Document Item (BSEG) -2
BUZEI : Number of Line Item Within Accounting Document
BSCHL : Posting Key - 50
DMBTR : Amount in Local Currency
HKONT : General Ledger Account
WERKS : Site
Pls guide in fixing this.
rgds,
balu

Hi
What is the solution , please let us know ? since we have faced the same error.
Regards
Bhavana

Accounting transaction not permitted for posting in FI/CO

Hi,
For inbound idoc triggering,
Message type FIDCC2
Basic type FIDCCP02
Process code FID2
When i try to post for F-02(or FB01), through WE19, above idoc, it is showing the 51 error: Accounting transaction not permitted for posting in FI/CO
I'm using the following fields:
E1FIKPF : FI Document Header (BKPF)
BUKRS : Name of global company code
GJAHR : Fiscal Year
BLART : Document Type - SA
BLDAT : Document Date in Document
BUDAT : Posting Date in the Document
MONAT : Fiscal Period - 05
TCODE : Transaction Code - FB01
WAERS : Currency Key
HWAER : Local Currency
GLVOR : Business Transaction - RFBU
E1FISEG : FI Document Item (BSEG) -1
BUZEI : Number of Line Item Within Accounting Document
BSCHL : Posting Key - 40
DMBTR : Amount in Local Currency
KOSTL : Cost Center
HKONT : General Ledger Account
WERKS : Site
E1FISEG : FI Document Item (BSEG) -2
BUZEI : Number of Line Item Within Accounting Document
BSCHL : Posting Key - 50
DMBTR : Amount in Local Currency
HKONT : General Ledger Account
WERKS : Site
For which fields u've triggered successfully, pls help in resolving the same.
rgds,
balu

Hi,
i appreciate for your quick reply...
i've applied the code corrections in the FM FI_IDOC_PREPARE , but still same error coming.
tnx n rgds,
balu

Value & is not permitted for attribute Sales Unit - Material Object

Similar Messages

Maybe you are looking for