Value Mapping Replication - Issue - Authorization Error
Hi all,
I am trying to do value mapping replication of the data from a table in ECC system using an outbound proxy on ECC and ASync Inbound interface on XI - valuemappingreplication.
Steps followed:
1. Created Table Stucture and did write a report to extract the data from the table in ECC to send the data through Outbound proxy.
2.Followed this blog - Value Mapping replication
When tried to execute the scenario after all the steps in the above blog, we have an error in sxmb_moni saying that the authentication failed. I used pisuper, pidiruser in the receiver communication channel
3.Generated a Java Proxy for the valuemappingreplication interface.
4.Tried to deploy the .jar from the above step using SDM, I was not able to deploy it.
reg
Edited by: naveen chitluri on Jul 16, 2008 12:55 PM
All,
For the value mapping replication,
I have tried to send the message to URL directly for RWB, Test Message in the Component Monitoring http://server:50400/MessagingSystem/receive/JPR/XI.
I am getting an error saying that:
Delivery of the message to the application using connection JPR failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Interface urn:flatfile:to:flatfile#MI_EMP_FILE_ASYNC_OUT not registered: com.sap.aii.proxy.xiruntime.core.XmlRecoverableException: Interface urn:flatfile:to:flatfile#MI_EMP_FILE_ASYNC_OUT not registered
Can anyone throw some light on this.
reg
Similar Messages
-
Value Mapping replication issue
Hi PI Experts,
I am working on the Value mapping replication scenario using Z-table created in R/3 system.
I have configured the value mapping Replication Out Abap proxy.
I am getting the following error :
Audit Log for Message: 4d404b41-39e4-0083-e100-80008b3557e6
Time Stamp Type Description
2011-01-27 07:56:19 Information The message was successfully received by the messaging system. Protocol: XI URL: http://gendevhrcx51.unix.appliarmony.net:54000/MessagingSystem/receive/JPR/XI Credential (User): PIAPPLUSER
2011-01-27 07:56:19 Information Using connection JPR. Trying to put the message into the receive queue.
2011-01-27 07:56:19 Information Message successfully put into the queue.
2011-01-27 07:56:19 Information The message was successfully retrieved from the receive queue.
2011-01-27 07:56:19 Information The message status was set to DLNG.
2011-01-27 07:56:19 Information Java Proxy Runtime (JPR) accepted the message.
2011-01-27 07:56:19 Error JPR could not process the message. Reason: Cannot locate proxy bean ValueMappingApplication.
2011-01-27 07:56:19 Error Delivering the message to the application using connection JPR failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing inbound message. Exception: Cannot locate proxy bean ValueMappingApplication.
2011-01-27 07:56:19 Information The message status was set to WAIT.
2011-01-27 07:56:19 Information The asynchronous message was successfully scheduled to be delivered at Thu Jan 27 08:01:19 CET 2011.
I have followed the threads :
1) /people/udo.martens/blog/2009/04/03/value-mapping-replication-scenario
2) ValueMappingReplication in PI 7.1
3) How to Perform Value Mapping u2013 A Walkthrough -> Sarath Chandra Kandadai
which had similar issue but could not make any headway.
Questions :
1) Are there any specific PIAPPLUSER authorizations required ,I have configured the CC as per the 3rd thread.
2) There is an issue with SLD access when I look at the JPR monitoring,could be the possible reason.
SLD access SLD host:port = gendevhrcx51:54000
Error getting JPR configuration from SLD. Exception: No entity of class SAP_BusinessSystem for DHX.SystemHome.gendevhrcx51 found
No access to get JPR configuration
I have refered to the Note : 809420 and asked the basis team to look into this.
I am running out of ideas ,request you guys to help on this issue.
Thanks
-AlokHi Alok,
i have similar error. Here the error:
30.12.2013 20:40:17.789
Information
Java Proxy Runtime (JPR) accepted the message.
30.12.2013 20:40:17.871
Error
JPR could not process the message. Reason: No remote bean found for reference of class com.sun.proxy.$Proxy352.
30.12.2013 20:40:17.876
Error
Delivering the message to the application using connection JPR failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing inbound message. Exception: No remote bean found for reference of class com.sun.proxy.$Proxy352.
30.12.2013 20:40:17.911
Information
The asynchronous message was successfully scheduled to be delivered at Mon Dec 30 20:45:17 CET 2013.
I have registered the inbound interfaces:
http://sap.com/xi/XI/System#ValueMappingReplication = localejbs/sap.com/com.sap.xi.services/ValueMappingApplication:valueMappingReplication
http://sap.com/xi/XI/System#ValueMappingReplicationSynchronous = localejbs/sap.com/com.sap.xi.services/ValueMappingApplicationSynchronous:valueMappingReplicationSynchronous
2 interfaces found
But somehow the bean is not found and gave me the error :
JPR could not process the message. Reason: No remote bean found for reference of class com.sun.proxy.$Proxy352.
Can you tell me in detail what you have done to resolve the problem? I send the test data from soapui using the outbound interface ValueMappingReplicationOut provided by the content in SAP BASIS 7.11.
Thanks,
Ly-Na -
Error - 403 - Value mapping replication - not authorized
Hello Experts,
I tried to implement the value mapping replication in PI 7.1as per the below article.
"http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e07dd2ae-f783-2c10-9aa6-ca69f67dd20f"
As given in the article i have configured everything in Integration Directory.
I have tried the same thing but getting the following error in "call adapter step" after sending the XML from soap client.
"<b>&nbsp;&nbsp;You are not authorized to view the requested resource.</b>"
I am able to find 2 error messages in SXMB_MONI.
i think this is an issue with user details in XI channels.
Please let me know what is the issue,user we have to give in XI receiver channel andwhat ROLE one should have to test the scenario.
Many thanks.
Regards,
HarishHi Hareesh,
Can you try to use the RFC/ communication user in the communication channel and try?
Please check the authentication type also, check if you will require non-sap type or sap type.
Thanks,
Hetal -
Value Mapping Replication : Error Category: XIServer
Hi All,
I'm doing a value mapping replication. Have configured the interface proxy-pi (Async) and the message is transferred to pi with no issues but in pi the message is logged with the following error as in payload:
>Error while receiving by HTTP (error code: 200, error text: Error Parsing Response. No XI Response Received
Link to payload > [http://www.esnips.com/web/SAPIssues ]
tried various cases yet the issue remains the same. any helpful tip on this?
thanks
PrabhuError in RWB: To be delivered
Error in moni: Payload as posted in the thread (refer link)
Error in SMQ2: User column:XIISUSER statustext column: Command to tRFC/qRFC: Execute LUW again -
Value Mapping Replication for Mass Data - Performance Issues
Hi All,
We are looking into Value Mapping Replication for Mass Data. We have done this for less number of fields.
Now we might have to have 15,000 records in the cache for the Value Mapping. I am not sure how this would effect the Java Cache and Java Engine as a whole.
There might be a situation where we will have to leave the 15K records in the cache table on Java Engine...
Are there any parameters that we can look into just to see how this hits the performance.
Any links/ guidance in the right direction might help me..
regNaveen,
Check jins reply in this thread (they have done with API and without API using graphical but still some issues):
Value mapping performance using LookUp API
---Satish -
401 - Unauthorized error in Value Mapping Replication scenario
Hi,
I'm trying to push some Value Mapping replication data from one of the clients (which is a non-Integration Server) of XI system to IS. When I execute the program which calls the outbound proxy, the XI message fails with the error HTTP_RESP_STATUS_CODE_NOT_OK 401 Unauthorised.
As given in SAP help, I registered the inbound java proxies and generated the outbound proxies. I confiured the receiver channel with path /MessagingSystem/receive/JPR/XI. In authentication data, I tried several users such as XISUPER, XIAPPLUSER, XIISUSER..Still I get the same error.
What is missing/wrong?
Thanks in advance
Praveen SirupaHi Praveen,
Could you pls do the following...just for verification....
enter the url http://<was_server>:5<sysnr>00/MessagingSystem/receive/JPR/XI
and when it asks for authentication give the XIAPPLUSER and password...you should get an xml that looks like this...
<?xml version="1.0" encoding="UTF-8" ?>
- <scenario>
<scenname>MSG_SCEN</scenname>
<scentype>SERV</scentype>
<sceninst>MSG_001</sceninst>
<scenversion>001</scenversion>
- <component>
<compname>SERVLET</compname>
<compdesc>Messaging System</compdesc>
<comphost>localhost</comphost>
<compinst>MSG_001</compinst>
- <message>
<messalert>OKAY</messalert>
<messseverity>100</messseverity>
<messarea>QR</messarea>
<messnumber>801</messnumber>
<messparameter>na</messparameter>
<messtext>MessagingServlet is active.</messtext>
</message>
</component>
</scenario>
Thanks,
Renjith -
Hi,
I'm having issue in value mapping replication and seeking help to fix it....following is my config in place:
1. Created java out proxy and registered it
http://host:port/ProxyServer/register?
ns=http://sap.com/xi/XI/System&interface=ValueMappingReplication&bean=localejbs/sap.com/com.sap.xi.se
rvices/ValueMappingApplication&method=valueMappingReplication
2. Configurations in place in ID
3. Activated the Outbound ABAP proxy and triggered the call from report program
No errors reported from the client abap proxy, yet, when checked in RWB i'm unable to view the VM table in cache monitoring....not sure where the error is.
Is it required to register the JAR file as generated during the step# 1 in J2EE visual Admin? else is there something I overlooked?> No errors reported from the client abap proxy, yet, when checked in RWB i'm unable to view the VM table in cache monitoring....not sure where the error is.
Check monitoring for adapter framework for errors. -
Value Mapping Replication Vs RFC Lookup API Usage Pros and Cons
Hi Ananth,
Looking at the options you have, Value Mapping Replication might be a better option, because, by going the second route, you are just trying to simulate how a Value mapping replication works in reality.
But, when the VMR framework is readily available, why do we need to simulate it by using Java code?
Moreover, the java code approach will be triggered as many times and the number of messages that are triggered VS the number of times the VMR tables in the Java Runtime gets updated only when there is an entry that is added/modified in the SAP side (Which i feel is less frequent than the frequency of the messages being sent through XI).
Regards,
Ravi Kanth TalaganaHi,
There are more issues you need to consider here:
1) Is this static data or will it change often (the lookup data);
2) Wether it is a good approach to keep it in middle system? if so who takes the ownership of managing it i.e. update, delete etc from time to time
3) The tables don't seem small to me for value mapping
I am not a big expert but i am off the opinion going RFC way as it will keep loose-coupling in place.
However your issue for not using graphical RFC is not true though, you can pass all your line items as a single object which means only making ONE single call to ECC and then get the return the same way. Think along the lines of internal table as an object
regards, -
Cache update in value mapping replication
Could anyone let me know when value mapping replication of mass data is done , the updated values in the java runtime cache that we can view in RWB->Cache Monitoring->Mapping Runtime Cache - are they deleted on system restart or are persisted somewhere.Is it only cached in Java memory and after restart we need to re invoke the scenario again to update the same.
Regards
SubhroHi,
You can refer the following post which talks about the same issue.
Re: Value Mapping Considerations for significantly high input
Also, go through this link for value mapping replication
http://help.sap.com/saphelp_nw04s/helpdata/en/2a/9d2891cc976549a9ad9f81e9b8db25/content.htm
Regards -
Value Mapping Replication - no method ValueMappingReplicationOutSynchronou
Hi There,
When i am trying to implement value mapping replication i a getting the below error.
""com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing inbound message. Exception: No such method ValueMappingReplicationOutSynchronous in proxy bean localejbs/sap.com/com.sap.xi.services/ValueMappingApplicationSynchronous""
I am using "ValueMappingReplicationOutSychronous" as my oubtbound and "ValueMappingReplicationOutSychronous" as my inbound interfaces.
We dont need to change anything other than server and port in the below URL to register right.?
http://<Server>:<Port>/ProxyServer/register?ns=http://sap.com/xi/XI/System&interface=ValueMappingReplicationSynchronous&bean=localejbs/sap.com/com.sap.xi.services/ValueMappingApplicationSynchronous&method=valueMappingReplicationSynchronous
Please note that i have tried multiple combinations in the above URLCas it gave the error after replacing only server and port.
Let me what went wrong..
Please help me out..
Regards
HarishHi.
First check if your interface is already registered,
http://server:port/ProxyServer/listAll
then unregister all
http://server:port/ProxyServer/unregisterAll
then register again..
there is another options.
Requests to (un)register beans for interfaces (requires security role xi_jpr_register_bindings):
/register Example: /register?[ns=myNamespace&]interface=myInterface&bean=myBean&method=myMethod
/unregister Example: /unregister?[ns=myNamespace&]interface=myInterface[&bean=myBean&method=myMethod]
/unregisterAll
Requests to list registered beans (requires security role xi_jpr_list_bindings):
/list Example: /list?[ns=myNamespace&]interface=myInterface
/listAll
Request to test the Java Proxy Runtime (requires security role xi_jpr_admin):
/jprselftest (also requires a configuration in the Integration Directory) -
Value mapping replication - groupid format
i am trying to use value mapping replication with the synchronous interface.
i generated an abap proxy and wrote this abap program:
REPORT z_value_mapping_proxy.
TYPES: BEGIN OF ty_lfa1,
lifnr LIKE lfa1-lifnr,
name1 LIKE lfa1-name1,
END OF ty_lfa1.
DATA : obj_ref_sync TYPE REF TO zco_value_mapping_rep_out_sync,
wa_output TYPE zvalue_mapping_replication,
gt_lfa1 TYPE TABLE OF ty_lfa1,
gs_lfa1 TYPE ty_lfa1,
gs_item TYPE zvalue_mapping_replication_itm,
lr_root TYPE REF TO cx_root.
START-OF-SELECTION.
SELECT lifnr name1 FROM lfa1 UP TO 100 ROWS
INTO TABLE gt_lfa1.
LOOP AT gt_lfa1 INTO gs_lfa1.
CONCATENATE gs_lfa1-lifnr '_to_' INTO gs_item-group_id.
CONCATENATE gs_item-group_id gs_lfa1-name1 INTO gs_item-group_id.
gs_item-identifier-agency = 'SEA2'.
gs_item-identifier-scheme = 'urn:source:vcode2'.
gs_item-identifier-value = gs_lfa1-lifnr.
gs_item-operation = 'Insert'.
gs_item-context = 'http://sap.com/xi/XI'.
APPEND gs_item
TO wa_output-value_mapping_replication-item.
gs_item-identifier-agency = 'REA4'.
gs_item-identifier-scheme = 'urn:target:vname4'.
gs_item-identifier-value = gs_lfa1-name1.
gs_item-operation = 'Insert'.
gs_item-context = 'http://sap.com/xi/XI'.
APPEND gs_item
TO wa_output-value_mapping_replication-item.
ENDLOOP.
LOOP AT wa_output-value_mapping_replication-item INTO gs_item.
WRITE: / gs_item-group_id, gs_item-identifier-agency,
gs_item-identifier-scheme , gs_item-context.
ENDLOOP.
TRY.
CREATE OBJECT obj_ref_sync
EXPORTING
LOGICAL_PORT_NAME =
CATCH cx_ai_system_fault .
ENDTRY.
TRY.
CALL METHOD obj_ref_sync->execute_synchronous
EXPORTING
output = wa_output
IMPORTING
INPUT =
CATCH CX_AI_SYSTEM_FAULT .
CATCH ZCX_VALUE_MAPPING_REPLICATIONF .
CATCH CX_AI_APPLICATION_FAULT .
ENDTRY.
COMMIT WORK.
in xi monitor i get the message:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Request Message Mapping
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="JAVA_PROXY.">APPLICATION_FAULT</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="http://sap.com/xi/XI/System">ValueMappingReplicationFault</SAP:ApplicationFaultMessage>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
and inthe aplication logViewer, in the log defaultTrace.trc, i get the message:
Error processing inbound message. FaultException: com.sap.xi.xI.system.ValueMappingReplicationFault_Message_Exception: <ns:ValueMappingReplicationFault xmlns:ns="http://sap.com/xi/XI/System"><standard><faultText>The GroupID 0000000001_to_Forks Manufacturin in item 0 has wrong format. Details: null</faultText><faultDetail><text></text><id>4</id></faultDetail></standard><addition><ItemNr>0</ItemNr><Item><Operation>Insert</Operation><GroupID>0000000001_to_Forks Manufacturin</GroupID><Context>http://sap.com/xi/XI</Context><Identifier scheme="urn:source:vcode2" agency="SEA2">0000000001</Identifier></Item></addition></ns:ValueMappingReplicationFault><ns:ValueMappingReplicationFault xmlns:ns="http://sap.com/xi/XI/System"><standard><faultText>The GroupID 0000000001_to_Forks Manufacturin in item 0 has wrong format. Details: null</faultText><faultDetail><text></text><id>4</id></faultDetail></standard><addition><ItemNr>0</ItemNr><Item><Operation>Insert</Operation><GroupID>0000000001_to_Forks Manufacturin</GroupID><Context>http://sap.com/xi/XI</Context><Identifier scheme="urn:source:vcode2" agency="SEA2">0000000001</Identifier></Item></addition></ns:ValueMappingReplicationFault>
does anyone know what the problem can be?
is there a specific format for groupid?Hi,
You can use FM GUID_CREATE and use 32 digit GUID.
Regards,
Sudharshan N A -
Cache not updated on Value Mapping Replication PI 7.1
Hi,
I already configure an scenario to do Value Mapping Replication on PI 7.1
I am sending the xml file thru an HTTP client and it seems to go all the way down. I have a "Processed Successfully" status in the moni but the thing is that I can not see any difference in the Cache at the RWB.
My receiver agreement uses the ValueMappingReplication interface to a CC of type XI.
Any ideas on what could be wrong?
Thanks in advance.
LuisHi Udo,
Your reply pointed me to the right direction.
In the RWB I found out that my group-id was in the wrong format, so to be sure, I used a function module called /OSP/GET_GUID. That way I generate a correct 32-bit group-id.
Now it works.
Thanks.
Luis. -
Value mapping replication - java cache
i used value mapping replication and successfully loaded values to the java cache (i can see the in the cache monitoring but not in the configuration).
when i try to use a scenario with value mapping using the agencies and schemes which i loaded, the mapping doesn't work and i receive the same value that was entered.
what could be the problem?
P.S
i used the same groupid for each pair of source and target value when i loaded them. is that the right way?Tomer,
what is the context that u used. Did you give the correct context in mapping as in Runtime Cache.
Regards,
Sudharshan N A -
How to achieve transport of value mapping replication cache table values ?
During the migration of our interface from XI3.0 to PI 7.11,
I need to transport the value mapping replication cache table values present in cache monitoring of runtime workbench in
XI 3.0 PRD to PI 7.11 DEV .
Please let me know the ways to acheive this so that I can have the same values present in PI 7.11 Value Mapping Cache table as maintained in XI 3.0.
Please point me into correct direction.
Regards
PSClick on "Tools" option, select "Export Configuration Objects" -> "Individual Objects" -> Choose the "Value Mapping Group" type, and then select the value mappings you want to transport.
-
ABAP program and FB for value mapping replication
Hi,
we are using a 40B system and I want to use the value mapping replication in XI. To refill the data into the XI database I must write an ABAP and a function module to transfer the data out of R/3 into XI (via RFC). Has anybody an example how the program (and the FB) must look like? i.e I want to read table mvke and extract the materialnumber and the prodhierarchy.
Thanks and best regards
ArnoldHi Arnold,
First you need a table type with a structure like follows:
operation
groupid
context
identifier
agency
scheme
(corresponding to the Interface ValueMappingReplication)
All used data elements should have type string or charXX
for example: operation - char10, groupid - char32, rest - char120
Next you create a function module with attribute 'remote-enabled module'.
The import parameter is your new table structure.
Next you create an ABAP program. Here an example:
report z_value_mapping .
tables mvke.
data:
p_value_mapping type zvalue_mapping,
p_value_mapping_table type zvalue_mapping_table.
p_value_mapping-operation = 'Insert'.
p_value_mapping-context = 'http://xi.com/Material'.
select * from mvke where matnr between '170' and '501'.
check not mvke-prodh is initial.
* Create a value mapping group to join two entries.
* use a unique 32 digit number.
concatenate '00000000000000' mvke-prodh into p_value_mapping-groupid.
translate p_value_mapping-groupid using ' 0'.
* Store the mapping source as first entry to the group
p_value_mapping-identifier = mvke-matnr.
p_value_mapping-agency = 'SenderAgency'.
p_value_mapping-scheme = 'MATNR'.
append p_value_mapping to p_value_mapping_table.
* Store the mapping target as second entry to the group
p_value_mapping-identifier = mvke-prodh.
p_value_mapping-agency = 'ReceiverAgency'.
p_value_mapping-scheme = 'PRODH'.
append p_value_mapping to p_value_mapping_table.
endselect.
* Push data to XI
call function 'Z_VALUE_MAPPING' in background task
destination 'IS_XID'
exporting
value_mapping = p_value_mapping_table.
commit work.
Import the RFC to the Integration Builder, create a mapping between your RFC and the interface ValueMappingReplication.
Check this Blog for additional steps:
/people/sreekanth.babu2/blog/2005/02/23/value-mapping-replication
Choose names for context, agency and scheme which are useful your scenario.
Regards
Stefan
Maybe you are looking for
-
Both Safari & Chrome freezing when downloading a file
Hi, Ever since upgrading to Yosemite I'm having issues sometimes downloading files from browsers. I usually use Safari and I noticed that when clicking on file and selecting Download Linked File or Download Linked File As, Safari freezes and requires
-
F110 APP run - Payment run has been scheduled, but job was not released
Dear Friends, We have made payment parameters, payment proposal, edit payment proposal and it was working fine upto that stage. Parameters have been entered Payment proposal has been created Payment proposal has been edited But when we selected payme
-
Cannot Export Video from Flash
Hi, I just copied this dvd movie using Magic DVD Ripper. I then open up Flash and import it to the library selecting "progressive Download from a Web server" (I DON'T want to lose the audio) and edit it by shortening it to just one scene. When I sele
-
Fixed-layout ePub displays one page no matter in landscape mode or Portrait mode
I use the code : <meta property="rendition:layout">pre-paginated</meta> <meta property="rendition:orientation">landscape</meta> <itemref idref="s001" linear="yes" properties="rendition:page-spread-center"/> <itemref idref="s002" linear="yes" properti
-
Browser out of date and can't install Adobe Flash Player
My browser is out of date according to everything I am visiting. I can't post pictures on twitter, some of the videos I watch have blocked plug-ins, and I can't install adobe flash player. My computer is a MacBook Pro 10.6.4, and I would like to ke