Value not appearing in the workbook

Hi Friends,
There are some values in the workbook which are prob appear through cell references. In dev sys its fine. We have moved the workbook to Quality, but here the values are not appearing. The value is period value which is not comming from either query columns or rows. I am unable to track down from where this value is appearing in the workbook. This period value appears where this (Layout ->display text elements ->General) appears ofcourse in Dev not Quality. There are many tabs(Queries) in the workbook.
How to know/check from where this value is getting populated.
Thanks & Regards,
Shreesh.

After adding 'trip type expenses in the layout' in the layout, save the layout as a variant and give it a name.
Next time when you run the report, put that variant and then run
Values will come

Similar Messages

  • Excise duties values not appearing in the RG1 register

    Dear All
    After updation of RG1 register and extraction of the same on  checking the entries in the table J_1IRG1 we are not getting the BED ,Ecess and SECS.In printing of this register the same values are not appearing.
    Further this register is around 524 pages.It is showing per transection.How can we redure no of pages.
    Please guide in this matter.
    deepti

    hi,
    once again check
    1.Tcode: J1id
    2.Tcode:J1iex
    here see part1 created or not check it.
    3. Tcode:J1i5 update register
    4. Check condi.types for SH
    is not fine pls revert back
    regards
    ka

  • Lead time values are not appearing in the report for current year.

    Hi friends,
    Iam checking a report in production.  where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
    how can i get values in the report.
    Thanks ,
    VRV.

    Hi,
    Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
    Eg: 5 Minutes + 5 Kilograms = 10
    You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
    Assign if helps...
    Regards,
    Suman

  • NET BOOK VALUE OF THE ASSETS NOT APPEARING IN THE BALANCE SHEET

    Hi,
        I have uploaded the old assets by using the T.code As91, but the values of the assets are not appearing in the Balance Sheet.Please help in solving this issue
    Ramaswamy

    Hi
    After loading the asset thro AS91, there is a transaction OASV thro which you need to update the GL accounts. 
    Thanks
    Ashok
    Assign points to say thanks

  • #REF! appearing in the workbook cells

    Hi gurus,
    When there are values for the query selection, the workbook will present the values properly but when there are no values for a perticular selection criteria of the query- #REF! appeares in the workbook cells. I think there are cell references in the workbook. Now the client does not want that  '#REF!' to appear, he wants zero to appear if values are not there. Pls advice how to achieve this?
    Thanks & Regards,
    Shreesh.

    Hi Shreesh,
    You can give an IF condition for the cells referencing the #REF! value as
    if ( cell reference = "#REF!", 0 )
    Also, have a look at the forum below:
    Bex Excel prolem with cell references
    Hope this helps u.!
    -Pradnya.

  • How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

    How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

    Use a normal question, and do not add the score to the total score. That will give you a correct score at the end. But the total number of questions, that system variable will still take into account all questions. You'll need a user variable, and calculate its value by subtracting 1 from the system variable cpQuizInfoTotalQuestionsPerProject. Same for the progress indicator if you want to show it?
    Customized Progress Indicator - Captivate blog
    If you want to allow Review, you'll have to tweak as well. You didn't specify the version, and all those questions I now mentioned.
    And my approach, since you talk about only one question: create a custom question, because you'll have total control then.

  • Container values not appearing in alerts - SAP CRM 7.0

    Hi Experts,
    I have 2 issues:
    1. I am calling an alert on lead creation by calling an action with processing type as TRIGGER ALERT.
    The alert appears on the home page but the container values defined in the long text are not appearing. The containers defined are as follows:
    OBJECT_ID - Object type - BUS2000108 - business transacton number
    Call later date - Z field in CRMD_ORDERADM_H - structure - CRMD_ORDERADM_H - Field Zabcd
    Please let me know if there is something i'm missing or if i need to define these values in the Method TRIGGER ALERT???
    2. If i want to call this action on a particular date (call later date as above), is it possible to take the reference of this date in the start condition?
    Regards
    Nitin Sehgal

    Dear Nitin,
    The first I am not sure, so hopefully someone else can help you with that.
    For the second, If you want a Z-field to be used in the action conditions, you should add an attribute to your BOR-object in SWO1.
    How to do this can be found here.
    [http://sapcrmweblog.blogspot.com/2011/01/adding-attributes-to-bor-object.html|http://sapcrmweblog.blogspot.com/2011/01/adding-attributes-to-bor-object.html]
    Hope it helps...
    Regards,
    Pieter Rijlaarsdam

  • BED(14%) not appearing at the time of creation of Export Sales Excise Inv

    Dear All,
    While creation of excise invoice for export sales the BED(14%) is not appearing in the excise invoice however Sec Cess (2%)and Higher Sec cess (1%) are appearing.
    If I create an excise invoice for normal sales then all the 3 Values are coming please suggest what needs to be done with regards to my excise invoice for export sales.
    Best Regards
    Atul Keshav.

    Dear Atul,
       Go to tax on good movement, - basic setting - default excise conditions for you procedure ie taxinn or taxinj - maintain your jexp or jex2. same way check your excise group - series group setting and also your delivery and billing condition types for export in taxon goods movement.
    regards,
    Sudhir
    Edited by: Sudhir Nair(India) on Nov 21, 2008 12:08 PM

  • Treatment of exchange rate difference- company code not appear in the list

    Dear guru,
    I am configuring the treatment of exchange rate difference (SPRO> MM> LIV > Incoming invoice> configure how exchange rate differences are treated). However,the company codes that needed to be configured are not appear in the list. Please note that in the config screen, dont have the option of "New entry", we only set base on the list of existing company codes.
    Also, please be noted that we configured accounts for KDM, PRD in OBYC already
    Appreciate your respond.
    Thanks and best regards,
    Hong

    Hi,
    Check in table "T169P" & "T169V", whether your Co. code exists or not? If not then maintain following config settings.
    SPRO > Materials Management > Logistics Invoice Verification > Incoming Invoice
    > Maintain Default Values for Tax Codes (After maintaining this entry by "New Entries", it will start appearing for following options)
    > Configure How Exchange Rate Differences Are Treated
    > Configure How Unplanned Delivery Costs Are Posted
    > Edit PO Supplement Text in Invoice Verification
    > Set Check for Duplicate Invoices

  • Channel is not appearing in the container

    Hi,
    i have devloped a channel and also a container.
    The follwoing are the corresponding xml's.
    The proble is the channels that i defined as <SELECTED>
    are not appearing in the container, can any one let me know why??????
    arun
    Channel XML
    <Channel name="NewsLeftNav" provider="NewsLeftNavProvider" advanced="false" merge="fuse" lock="false">
    <Properties>
         <String name="refreshTime" value="60"/>     
    <String name="title" value="Left News Channel"/>
    <String name="description" value="News Information"/>
    </Properties>
    </Channel>
    ProviderXML
    <Provider name="NewsLeftNavProvider" class="com.naportal.NewsLeftNavProvider">
    <Properties>
    <String name="title" value="News Left Nav"/>
    <String name="refreshTime" value="0" advanced="true"/>
    <Boolean name="isEditable" value="false" advanced="true"/>
    <String name="editType" value="edit_subset" advanced="true"/>
    <String name="contentPage" value="naportal/newsdesc.jsp"/>
    </Properties>
    </Provider>
    Custom Provider
    <Provider name="NewsTableContainerProvider" class="com.naportal.NewsTableContainerProvider">
    <Properties>
    <String name="contentPage" value="GMtoptable.jsp"/>
    <Collection name="categories">
         <String value="NewsChannels"/>
    </Collection>
    <Collection name="NewsChannels">
         <String name="NewsLeftNav"/>
    </Collection>
    </Properties>
    </Provider>
    Container
    <Container name="NewsTableContainer" provider="NewsTableContainerProvider">
    <Properties>
    <String name="title" value="Front Table Container Channel"/>
    <String name="contentPage" value="GMtoptable.jsp"/>
    <Collection name="categories">
         <String value="NewsChannels"/>
    </Collection>
    <Collection name="NewsChannels">
         <String name="NewsLeftNav"/>
    </Collection>
    <Collection name="channelsRow" advanced="true">
         <String name="NewsLeftNav" value="3"/>
    </Collection>
    </Properties>
    <Available>
         <Reference value="NewsLeftNav"/>
    </Available>
    <Selected>
         <Reference value="NewsLeftNav"/>
    </Selected>
    <Channels>
    </Channels>
    </Container>

    Have you watched the desktop.debug logfile?
    On my installation, it's in the /var/opt/SUNWam/debug directory.
    It might give you some clues...

  • CS3 action script 2.0: compiled clip components do not appear in the component panel

    Hi,
    I have a FLA file containing 3 compiled clip components.
    I use a MXP file to copy this file to the components panel,
    this works fine when using Macromedia Flash 8 or Macromedia MX
    2004, but when using CS# the components do not appear in the
    components panel, only if a use regular component or SWC component
    it appears in the panel, any reason why?any ideas?
    Thanks
    Maya

    I can use this code from html. I'm able to say where the swf
    and xml file are. I just don't know how to do this using action
    script.
    <object
    classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="
    http://fpdownload.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0,0,0"
    width="768" height="576" id="tech" align="middle">
    <param name="movie"
    value="slideshow.swf?xml_path=musicbox_slideshow/slideshow.xml"
    />
    <param name="quality" value="high" />
    <embed
    src="slideshow.swf?xml_path=musicbox_slideshow/slideshow.xml"
    quality="high" width="768" height="576" name="tech" align="middle"
    allowScriptAccess="sameDomain" type="application/x-shockwave-flash"
    pluginspage="
    http://www.macromedia.com/go/getflashplayer"
    />
    </object>.

  • SCCM 2012 R2 - Software metering Reports Parameters Value not appear to choice

    Hello Every Body
    I hope to get answer as soon as possible
    I have SCCM 2012 R2 & SQL Server 2012 SP1, my problem is ( all software metering Reports Parameters Values Not appear so I cannot select
    Note:-
    ( All parameters Available Value set to Get Values From a Query) 

    Has it been over 45 days since you created the active SWM rules? Do all (most) other SWM reports
    work?
    all other reporting in SWM which doesn't ask for month and year working
    only the problem in year & Month Parameters Values
    note:-
    these reports doesn't need a 45 days to work, alwasy when i install SCCM reports working only from the second day of installation

  • L.C value not appearing in MB51 report

    Dear gurus,
    The l.c value not appearing in MB51 t.code,are there any other reports to see this values if so,plz explain in detail

    Dear Jay,
    It will be available in MB51, may be check your variant for hidden fields or your authorization, You will get in MR51 also
    In Standard SAP System Asset GR will not have any Finance document at the time of Goods Receipt, So you are not getting Amount in LC, If you want to trigger finance document at the time of GR, you have to change the account assignment category A properties like i.e., remove the tick of GR Non valuated  in the below path
    SPRO-->Materials Management-->Purchasing-->Account Assignment-->Maintain Account Assignment Categories, Select A
    Goods receipt made after this change will be triggered the finance document.
    R,
    amala

  • Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applica

    Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applications.

    I received no error message. The application was just trying to find applications unsuccessfully.
    I am using MAC OS 10.10.1
    I tried to uninstall the application  but it seems that a kind of deamon is still installed thus providing me to reinstall properly. Do you know where are the elements to remove in order to get my machine just like before ?
    Otherwise I would have to reinstall everything and this would be a pain.
    Thanks for your help.

  • Cross Reference Sources appearing in Story Editor view but not appearing in the Cross Ref pane

    I have imported a Word document containing working cross references into an InDesign document. The vast majority of these cross references import correctly and link to their destinations within the document, however there are some that are not working. If I view the text frame in the story editor view, I can see these "broken" cross reference sources that came in from the Word doc but on selecting them I can see that there isnt a corresponding entry for it in the cross reference pane. As said, there are only a few that are behaving like this.
    What could be causing these not to appear in the cross reference pane?
    Obviously as they are not appearing in the list of cross references I can't update them, and also, as they are technically broken cross references, because a source exists for them but there is no corresponding entry in the pane, then on export to epub, InDesign crashes (If there is one broken cross reference in a document, export to Epub will crash indesign).
    Also, to clarify, in the Word doc if I navigate to a cross reference that is failing once in InDesign, I can update it properly, and also navigate to its destination in the Word doc, so it's not as though these cross references are broken before coming into InDesign. Also I believe the destinations for these "broken" cross references are coming across properly to indesign too as I can see them in the story editor view.
    Supposed Cross Reference source selected in Story Editor view on left, but no corresponding cross reference highlighted in pane on right:
    Technical Details:
    InDesign CS5.5 - Version 7.5.3
    Microsoft Word 2010, File type .docx

    I have found the possible cause of this problem!
    If a table is used within the Word document somewhere between where the cross reference source is and its destination then that particular cross reference will be broken as described above in my initial post.
    So the "fix" is to remove any occurances of a table in the Word document and the cross references come into InDesign perfectly. This is actually not a fix at all. I need to use tables in the Word document for layout purposes so if they break cross references if they stand between them and their destinations then I have to compromise, i.e. use tables but with no cross references in the document or vice versa.
    I found a similar issue recently with index markers in Word causing a shift on the cross reference tags when bought into InDesign. The "fix" again for that was to remove all index markers from the Word document. See post about this here: http://forums.adobe.com/thread/1043981
    InDesign really needs to sort out the issues with importing of Word documents with cross references in them. If I can't use index markers and tables in a Word document without breaking its cross references then they can't claim to have the ability to import a Word document while maintaining its cross references into an InDesign document. It just doesnt work as ive painstakingly proven.

Maybe you are looking for