Value not displaying for the transient variable

Hi all,
I have added a transient variable in my VO.xml file and assigning a value to it in my code along with other non-transient variables. But that value is not getting displayed on the UI.
Please help me in understanding the behavior of the transient variables in this context and how will I be able to see that value on the UI.
Thanks.
Gurpreet Singh

hi Gurpreet,
You can add values to that transient column programatically,either by getiing the row from the iterator and then row.setAttribute('Column_name','Value');
Or providing value to it in the SQL...

Similar Messages

Rate and accessable value is not displaying for the tax invoice output

Hello All,
Rate and accessable value is not displaying for the tax invoice output. Rest of all outputs for invoices shows Rate and accessable value.
Scenerio is free of charge sales order (samples) removing the goods from pant so excise invoice has been created and also updated. but for tax invoice out put rate and access value is not displaying.
Pricing procedure: In pricing procedure account keys have not been maintained because there is not gl account upadation during billing for free of charge delivery.
Thanks & Regards,
ramesh

hi Gurpreet,
You can add values to that transient column programatically,either by getiing the row from the iterator and then row.setAttribute('Column_name','Value');
Or providing value to it in the SQL...

Assessable value not maintained for the material X

Dear all,
i have maintained material chapter ID,Plant and materialchapter id combination ,assessable value , cenvat determination, and vendor excise details in the transaction J1ID .
Even after maintaining all these conditions , i am not able to save the po,while saving the po i got a error message that assessable value not maintained for the material X..
Points will be rewarded for useful suggestions.
Thanks in Advance.
velu+91-9789991357

Hi,
Search using approriate keywords in SDN, u get most of the details, i have now done the same searched and have pasted below .
Try ME2N.
Click on the "dynamic selections" icon and add the release indicator as an additional selection. Enter the release indicators that you class as "awaiting approval" and you will then have your list.
The ME2* series of transactions are not that much use prior to 4.7, the layout is poor. But if you have 4.7 or later you can get the screen to use the ALV format and this transforms the ME2* (i.e. ME2L, ME2M, ME2N etc.) transactions into VERY useful reports.

Null values not displaying in the LOV on the parameter form.

My report works perfect while in Oracle Reports 10g, however when I move it to our menu (Oracle Forms 10g) it does not display the null in the LOV on the parameter form.
This report allows the the user to select by inspector or district or everyone for certain dates.
Ex: I have 4 parameter fields. The user must enter the start & end dates and either the Inspector or the district or leave the inspector or district null to run for everyone.
The district LOV is :
select dnr_section_code, description from dnr_section_code where dnr_section_code in ('29', '38','52')
UNION
select null, 'All' from dual
order by 2 asc ;
The inspector LOV is:
select null , 'All' from dual
UNION
select person_seq, first_name||' '||last_name inspector from vw_eng_inspectors
order by 2 asc
In my Data Model query I use the :
My select
from tables
where clause
+
----by inspector
and (prod_fac_inspections.person_seq_inspector =
nvl(:inspector,prod_fac_inspections.person_seq_inspector))
---by district
and
(d.dnr_section_code = nvl(:district,d.dnr_section_code)
and d.person_seq = prod_fac_inspections.person_seq_inspector)
Again, it works perfect in Reports! It eliminates having 3 reports on the menu. This one report gives the user the option of selecting dynamic parameters.
Also, I got so frustrated, that I went a different route of using a default where.
I am stuck with the error of ORA:00933 SQL command not ended properly
1=1
I set the initial value to 1=1 and it does not like it.
I am stuck!
DB = Oracle Database 10g Enterprise Edition Release 10.2.0.2.0

Hi Krishna,
I'm not sure I understand the probelm.
A progress bar control only displays numeric values. When do you mean by "unassigned values"? What would you expect to be presented?
Best regards,
Udi

Formatted Search icon is not displaying for the UDF

I have fifteen UDF's in the Marketing document and I have applied formatted search on each of the fifteen.
But for one paticular UDF formatted search icon is not displaying even though the formatted search is active on the field but it is working fine for other field of same kind in same scenario.
Please help me.
Regards,
Awadhesh
Edited by: Awadhesh Kumar Pandey on Feb 9, 2009 5:58 PM

Hi
Try this
Go to View in the menu bar > Indicator Display >User Defined Values .
Hope this will resolve your issue
Thank you
Bishal

Buttons are not displayed for the first time when drawImage method is used

Hi
In my swing window 2 buttons are there and when clicking these buttons, it should display an image . The two buttons are displayed at the first time and I can click on it . While clicking a button , the corresponding image is also got displayed. [ I am using drawImage() function for it] But what the problem is, then the two buttons are not displayed and it will be displayed again when the mouse moves along the position of these two buttons. And this problem occurs only at the first time..When they are on the window on a second time, they won't vanish when the image is displayed when clicking it. Is this the problem with paint() method?. I am using start() method also.
Please help me!
Thank You

Hi
This is not my exact program, that has a large no: of code. So I am putting here a sample one. One thing I would like to point out is that , I can see the buttons at the time of loading the applet and suddenly it vanishes and the image is drawn. Then if I move the mouse along the position of these buttons , they got displayed.
import java.awt.*;
import javax.swing.*;
/*<applet code = MyClass width = 500 height = 500>
</applet>
public class MyClass extends JApplet
Image img;
JButton b1,b2;
Container cp;
Canvas1 cv;
class Canvas1 extends JPanel
public void paint(Graphics g)
super.paint(g);
g.setColor(Color.black);
g.fillRect(0,0,500,500);
img = getImage(getCodeBase(),"image1.jpeg");
g.drawImage(img,20,20,this);
public void start()
cv = new Canvas1();
cv.setBounds(0,0,500,500);
cp.add(cv);
public void init()
setLayout(null);
cp = getContentPane();
b1 = new JButton("Button1");
b1.setBounds(1,1,100,30);
cp.add(b1);
b2 = new JButton("Button2");
b2.setBounds(200,1,100,30);
cp.add(b2);
It would be very helpful to me if you could fix the problem.
Thank You.

Too many values.Not displaying all the data

Hi All,
I have facing the problem, while showing the map for different location. It says that Too many
"ColumnName" Values.
I cant find any where what is the limitation while representing the maps.......
Please share any one have aware of it.
Thanks in advance........
ChinniKrishna T Database developer

Hi,
I think this article explain it:
http://office.microsoft.com/en-001/excel/bubble-and-scatter-charts-in-power-view-HA104017427.aspx
Tip Pick a category that doesn’t have too many values. If the category has more than 2,000 values, you see a note that the chart is “showing representative sample” rather than all the categories.
Regards,
Christian HL
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Mouse over values not displaying properly for the Combination Chart

Hi All,
A Combination Chart has the following details:
Primary Y Axis has Revenue in mn $.
Secondary Y Axis has %.
When the mouse over is being done, 4% is being displayed as .04
It should be displayed 4% & not as .04
The Mouse over values has the Number format as u201CNumericu201D.
Sometimes, it works in u201CGeneralu201D format. (%)
However, there is no control on the no of decimal places displayed for the value of Revenue (Primary Y Axis value).
Whereas, in Numeric format, decimal places can be adjusted.
Secondary vertical(value) Axis Labels has "Percent" as the Number format.
Please suggest a solution.
Thanks,
Raghu Ram

Hello.
Look I have an idea, I donu2019t know if you already try it.
Please give the format that you want percentage, decimals etc...
In the Excel where the charts are being directed
Then redirect de chart to the same cells, these with the porpoise of refreshing
Now each serie have the format.
Please let me now what happen with these

Using a Variable in SSIS - Error - "Command text was not set for the command object.".

Hi All,
I am using a OLE DB Source in my dataflow component and want to select SQL Query from the master table I have created variables v_Archivequery
String packageLevel (to store the query).
<Variable Name="V_Archivequery" DataType="String">
     SELECT a.*, b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
     FROM dbo.ImportBBxFbcci a LEFT OUTER JOIN Archive.dbo.ArchiveBBxFbcci b
     ON (SUBSTRING(a.Col001,1,4) + SUBSTRING(a.Col002,1,10)) = b.BBxKey
     Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL)
    </Variable>
I am assigning this query to the v_Archivequery variable, "SELECT a.*, b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
FROM dbo.ImportBBxFbcci a LEFT OUTER JOIN Archive.dbo.ArchiveBBxFbcci b
ON (SUBSTRING(a.Col001,1,4) + SUBSTRING(a.Col002,1,10)) = b.BBxKey
Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL)"
Now in the OLE Db source, I have selected as Sql Command from Variable, and I am getting the variable, v_Archivequery .
But when I am generating the package and when running I am getting bewlo errror
Error at Data Flow Task [OLE DB Source [1]]: An OLE DB error has occurred. Error code: 0x80040E0C.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E0C Description: "Command text was not set for the command object.".
Can Someone guide me whr am going wrong?
Please let me know where am going wrong?
Thanks in advance.
Thankx & regards, Vipin jha MCP

What happens if you hit Preview button in OLE DB Source Editor? Also you can use the same query by selecting SQL Command option and test.
Could you try set the Delay Validation = True at Package and re-run ?
If set the query in variable expression (not in value), then Set Evaluate As Expression = True.
-Vaibhav Chaudhari

Business Rule err The following value is not valid for the run time prompt.

Hyperion Planning v 9.3.3
I have created a new BR with 2 local variables (created at the time of the BR), Variables are set as run time prompts. They are created as "Member" (not Members). The BR basically does a calc dim on dense and Agg on Sparce other than the prompt on Entity and Version dimensions. The entity variable has a limit on level 0 of the dimension. The Version variable limits to the input (Submit and Sandboxes)
The BR is associated in Planning with an input web form. Entity and Version are in the page. Is set to Run on Save and Use members on form.
If the run time prompts Hide boxes are checked, an empty Prompt pops up with only a Submit button. Click the button and an error comes up: "The following value is not valid for the run time prompt it was entered for:. But it does not indicate what member - just ends in the :.
The BR will run sucessfully only if the Run-time prompt is not hidden - "Hide" in the BR is unchecked. So the syntax and logic of the BR is correct and security should not be an issue.
The client wants no prompt. In production we have similar situations in which the BR works with the Web Forms without a prompt.
What am I doing wrong - I have tried restarting the Planning service and the EAS service.

My preferred method of doing this is:
1. In business rule, do not hide the run-time prompts. This makes it easy to validate the business rule as you are building it. I only use Global Variables.
2. On the form, have business rule set to run on save, use members on data form and hide prompt.
Check that in the business rule, for the variables (Run-Time prompts), that they are all in use. If not, delete them from the business rule. Are all your variables global? Are some local and some global? This could be the issue.
Deanna

The value 4010 39 99 is not allowed for the field MARC-STEUC/BAPI_MARC-CTR

Hi all,
BAPI' BAPI_MATERIAL_SAVEDATA' throws error the below error while creating material.
'The value 4010 39 99 is not allowed for the field MARC-STEUC/BAPI_MARC-CTRL_CODE'
Any idea abt this error.
Regards,
Thiyagu

Hi,
As this BAPI is triggered from external sytem that by client in production environment , I would not be able to dig it further.
Thats why I asked if anybody confronted the same error previously.
Thanks for suggestion.

The value is not allowed for the field Cross-plant CM

Hello All
When i copy material in refernce to existin gone. I am getting this message
"The value is not allowed for the field Cross-plant CM"
I am not putting any thing in this Basic-view Cross-plant CM, but still getting this message.
Any help will be good...Thanks in advance...

Hi,
Please check the check box in front of the field config material is checked?
If so then this material is configurable material
A material that can have different variants.
For example, a car can have different paint, trim, and engines.
Configurable materials have a super bill of material (BOM) that contains all the components for producing every variant of the material. Similarly, they have a super task list that contains all the operations. When a material is configured, only the components and operations needed for a variant are selected.
Please check
BR
Diwakar

Overnight, text body of emails will not display for messages in inbox-only the from and to and a subject line displays. Draft messages in Ipad display fully. Inbox emials display fully on my main Dell computer and my Iphone. Any ideas? Duanekot

Overnight, the taxt body of emails will not display for all messages in the inbox. Only the From and To and a subject line display. All messages in my Draft Mailbox display fully. Also, all emails in my Dell laptop and my Iphone display fully. Any ideas?? Duanekot

See if this helps .... Reset the iPad.
Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears - ignore the red slider bar - let go of the buttons and let the iPad start up. Then check your emails.

Can we set a default value for the container variable in BPM?

Can we set a default value for the container variable.?
Suppose if i have a loop step and i have given a container variable i=5 as end condition.What value will it take during its first execution?Can we set the value for container before a recieve step?

Hi
Define Container Variable of Type integer and Category Simple Type .Use Condtion in Loop.
In Container Operation Step Assign value and Use Expression to
Increase or Decrease Valus according to your operation.
look Pattern 4 in this blog to understand Container Operation
/people/sharathchandra.girmaji/blog/2008/09/11/bpm-with-patterns-explained-part-1

Images were not displaying in the B2B web shop for the products

Hi,
We have an issue with Product catalog images.we maintained images for the products and replicated(Initial) to TREX server,replication was successfull,but the images were not displaying in the b2b webshop for the products.
Anyone suggest what could be the problem?
Regards,
PV.

Hi,
The problem could because of following issues.
1) The replication is not done properly
2) The XCM doesn't have Image server's settings(URL)
3) The Image server is not reachable from ISA application.
4) The image server is not connected through HTTP.
Please check.
Regards,
Sateesh Chandra

Value not displaying for the transient variable

Similar Messages

Maybe you are looking for