Value range for domain

Is it possible to enter value range more than 10 characters long ??

HI Michal
This seems to be a restriction as the DOMAIN for storing the value range is defined of length 10 Chars.
Kind Regards
Eswar

Similar Messages

  • Finding short text description of Fixed values for value range for domain

    Hi,
    When I got to Dictionary: Dispaly Domain and click on tab value range; I get the template showing Fix. Val and its associated short text.
    I want to fetch the short text for a particular fix. val for a domain.
    How can I do that ? What table can I use it ? Or do I need to use some function module ?
    Lets say I want to fetch the short text for a given Fix val. for domain VBELN.
    Please help me out.

    Hi,
    You can use Function Module 'FM_DOMAINVALUE_CHECK' to get the fixed values of any domain.
    Regards,
    Atanu

  • Value range of domain

    Hi Experts,
                       what is the importance of value range tab of domain?........if we enter any interval in value range for the domain and then we assgined that domain to a table field.Now can we only enter value into the field only satisfying the interval in value range of the domain?
    I have already assigned domain to a package and Now I want to change that package and request no.Is there any way out?

    Hi,
    A Domain defines a Value Range. The value range of a domain can be restricted by defining fixed values. If all the fields or components that refer to the domain should be checked against a certain table, this table can be defined as the value table of the domain. If you maintain only the interval values, then your values entered will be restricted in that Interval only.
    For Changing the package Assignment of the domain, go the Object Navigator (TX:SE80) and then navigate to the domain using the package. Select the Data Dictionary Objects like Domain and using the Context Menu of the mouse you can change the package assignment.
    For changing the transport request, you have to go to SE09 ( Transport Organizer Tool) and then delete the old task from it or you can create a new transport request and the change the task assignment of the existing ones to the new one.
    Hope this helps.
    Thanks,
    Samantak

  • Value range of domain as serach help

    A Z domain have been defined a with a value range and domain is not used in any table. Can this value range of domain  is used as F4 help on selection screen.
    Selection screen is not designed thru screen painter but thru statements.
    Kindly resolve.
    anu

    HI anu  ,
    yes  it is  possible   in the   at selection output   ...
    DATA  : lt_dd07v_tab_a     TYPE  TABLE OF dd07v.
      DATA  : ls_dd07v_tab_a     LIKE  LINE  OF lt_dd07v_tab_a.
      DATA  : lt_dd07v      TYPE  TABLE OF dd07v.  " this  is  internal table for  your screenfield
      DATA  : ls_dd07v      LIKE  LINE OF  lt_dd07v. " work area for  your screenfield
    CALL FUNCTION 'DD_DOFV_GET'
           EXPORTING
             get_state           = 'M'
             langu               =  ' '
    *       PRID                = 0
             withtext            = 'X'
             domain_name         =   'zkunnr'       "  your  zdomain hardcode it
    *     IMPORTING
    *       GOT_STATE           =
            TABLES
              dd07v_tab_a         =  lt_dd07v_tab_a
              dd07v_tab_n         =  lt_dd07v_tab_n
         EXCEPTIONS
           illegal_value       = 1
           op_failure          = 2
           OTHERS              = 3
    LOOP  AT  lt_dd07v_tab_a   INTO  ls_dd07v_tab_a .
            MOVE-CORRESPONDING   ls_dd07v_tab_a   TO   ls_dd07v .
            APPEND   ls_dd07v  TO  lt_dd07v .
          ENDLOOP .
    in the  above  the    lt_dd07v  is your     screen  field  internal table  
    or else   you can  move the   field  which you  delcare in the program
    reward  points if it is usefull
    Girish

  • Fixed Value Ranges in Domain

    Hi all,
                i have create table in DDIC and use some domain in that. Now my problem is that there is a option in Domain which is Value Range.I am not able to find the reason why we use this in domain. Means what is the benifit of using Value Range ??
    Hoping for the best solution.
    Thanx,
    Vaneet

    The check table must have a key field which has the same domain as the check field of the foreign key table."
    the above means that when I use domain(which contains value table ) the same domain must be there in check table .
    Yes, the domain must be the same for check field (some field in ztable which you want input help for) and for key field of check table (which we match with check field).
    I.e. when you look at table SPFLI you can see field CARRID (this is check field ) . Click on it and select Foreign keys (key icon button). You will see SCARR (this is check table ) and matching keys MANDT and CARRID (foreign keys for them are SPFLI-MANDT and SPFLI-CARRID). Then you go to check table SCARR and look at field CARRID.
    The domain must be equal for check field (SPFLI-CARRID) and corresponding check table field (SCARR-CARRID). Only then the input help will be provided correctly.
    So that means value table and check table are always same .
    Not necessarly, but most often yes. This is because value table serves only the purpose of providing default table for foregin key relationship (when you want to define one), but you are allowed to change that assignment during relationship creation. No other "value" comes with using value table
    By defining only value table i cannot get input help , i have to have check table
    Correct!
    Then what is the use of value table ?
    As explained above, only for developer to have proposed this value table as a check table during foreign key definition.
    whlile creating z field i can directly use a check table without defining a value table in domain.
    Yes, you can. Nevertheless you will have to provide check table yourself. System will not suggest one.
    Kindly explain me the use of value table in terms of adding zfield .
    No sure if correctly understand you here. ZFIELD can use value table, but without check table it is useless. It will not provide you any input help, nor will check entry for that field when used i.e. on the screen.
    If you still feel not good with above explanations please refer [url]When is Value table called?;url]
    Edited by: ajay KOLLA on Jun 29, 2010 12:40 PM

  • Problem when define Value range for data element

    Dear
    When I define a new data element in ABAP Dictionary, for example, ZDATA_ELEMENT_TEST.
    I use domain ZDOMAIN_TEST.
    (Data type is DEC, the length is 10, and decimals is 2 with sign.)
    Now, I want to restrict that, user can ONLY input the value from 10 to 100.
    From ABAP course and the Internet, I switch to "Value Range" tab, and define 10 for Lower Limit, 100 for Upper Limit in Intervals section.
    And write the simple program.
    PARAMETERS test TYPE ZDATA_ELEMENT_TEST.
    WRITE: test.
    And run it.
    Line: -
    But, there is a problem.
    When I input 200 for test, the program still run and display 200 to screen without any error report or notification. The ABAP runtime system doesn't check the input value.
    I want to config for the domain that can satisfies, if the user input the wrong value (e.g: 200 in the previous case), the program will auto raise the error report, or exception, or sth like that.
    Any help is welcome.

    Hi Hanni,
    Welcome to forum.
    Try to attach key word VALUE CHECK to your PARAMETER statement.
    I.e:
    PARAMETERS test TYPE ZDATA_ELEMENT_TEST VALUE CHECK.
    Note: The addition VALUE CHECK cannot be used together with the additions AS CHECKBOX, RADIOBUTTON, or NO-DISPLAY.
    Regards,

  • Can i create value range in domain

    can i create value range in domain

    Hi,
    Value range means we will give possible values at Domain level.
    We will have Value tabe also at Domail level.
    when we give possible values at Domain level it will restrict to those values to that particular field.
    Deepak.
    If this helps you reward with points.
    Message was edited by: KDeepak

  • Value range for free characetstic

    Hi All,
    I need to restrict the free characterstics value range form 20...29 and 40...49 for document type charcaterstic in the work book i mean i need to exclude the 20..29 range and 40...49 range form the selections, but i couldn't see the 20 and 49 in the slections i can see only 21 to 29 i couldnt find 20.How to achieve this in the work book itself.
    Any help in this regards.
    will assign the points.
    thnaks
    sg

    Hi SG-
      Lets see if this helps. In the query definition, from the context menu of doc type, choose RESTRICT. In the small window that opened, click on the box at the bottom left that has an arrow pointing to the right. In the subwindow that opens, see if you have the checkbox for Only Values in Infoprovider selected (tick mark). If yes, uncheck it and see if you can find the value 20 now. Let me know if it worked.
      What KJ said is true. But since you said that your superior was able to do so for the same infoobject I am assuming that the values are being filtered from master data table already. One other place you can check is in the infocube. Go to RSA1, doubleclick on the infocube, go to EXTRAS -> Structure specific infoobject properties -> see what is the selected value under the column F4 query. If it says Only Values in Infoprovider, then change it to Values in Master data table and activate the cube.
    Assigning points is the way of saying thanks in SDN.
    Message was edited by:
            Sudheer B

  • Value Range for numeric field

    I'm fairly new to LiveCycle, I've used it to make forms for a bit, but am now hoping to make the forms much more advanced.  I'd like to know the best way to set a value range/parameter for a numeric field? I want the filler to be restricted to a range of $300 to $10,000 and if they try to enter below or above that value they would receive an error message.  I've looked at all the beginner material and am trying to get introduced to FormCalc and/or JavaScript but not fully comprehending the best/complete method (any guidance on where to start is also greatly appreciated).
    Thanks, Ed

    if (((300 < this.rawValue) && (this.rawValue < 10000)) || (this.rawValue == null)){
       true
    } else {
    this.rawValue = null;
    app.alert("Please enter a value between 300 and 10.000")
    I changed some things though... ^^
    If you want 300 / 10 000 to be true too then set <= instead of <.
    You can also change the app.alert message as you want.
    If you don't add the null in the beginning you might get an error message if it's on the validate event. If it's in the exit there shouldn't be a problem...
    Though this is just a little different from Paul's original solution.

  • UIAcceleration value range for x,y,z

    Most posts I've read say that UIAcceleration's x,y,z go from -1 to +1, but I get values of -1.04 to +1.04. As I'm trying to determine the 'exact' angle of rotation of the device, the extra 0.08 of play at the extremes is a problem.
    Is this just a bug in my phone or do all phones have this actual range?
    In my current calculations, I use asin(acceleration.x) which of course throws errors when acceleration.x > 1. One temporary solution has been to set any value > 1 equal to 1. That's a problem though because all any angle 86-90 degrees registers as 90 degrees.
    The other option was to simply normalize the values by dividing by 1.04. This works if all phones have an actual range of -1.04 to +1.04, but I don't know if that's true yet.
    Any help appreciated.
    Thanks,
    Anthony

    Thanks RayNewbie and mbessey.
    Here's my solution:
    // Here are values of interest
    #define PI 3.141592653589793
    #define kAccelerometerFrequency 30.0
    #define kBoundingBoxSize 125
    #define kBallRadius 10
    #define kDefaultCalibrationX 0
    #define kDefaultCalibrationY -45 // standard landscape gaming position
    #define kDefaultCalibrationZ 0
    #define kFilteringFactor 0.075
    // Apply a low pass filter to remove noise
    // Use mbessey's recommendation to normalize the acceleration values
    // as RayNewbie shows they are typically not == 1.
    double magnitude = Norm(acceleration.x,acceleration.y,acceleration.z);
    accelX = ((acceleration.x/magnitude) * kFilteringFactor) + (accelX * (1.0 - kFilteringFactor));
    accelY = ((acceleration.y/magnitude) * kFilteringFactor) + (accelY * (1.0 - kFilteringFactor));
    accelZ = ((acceleration.z/magnitude) * kFilteringFactor) + (accelZ * (1.0 - kFilteringFactor));
    // Calculate the angles at which the device is being held
    xRoll = atan2(accelY,-accelZ);
    yRoll = atan2(accelX,-accelZ);
    zRoll = atan2(accelX,-accelY);
    // Convert from radians to degrees and adjust to desired calibration angle
    xRoll = xRoll(360/(2PI)) - kDefaultCalibrationX;
    yRoll = yRoll(360/(2PI)) - kDefaultCalibrationY;
    zRoll = zRoll(360/(2PI)) - kDefaultCalibrationZ;
    Cheers,
    Anthony
    Message was edited by: Biosopher

  • Domains-Without Value range.

    HI All,
           My secnario is that  i have use few standard domains that do nat have any value range for that domain,
    so i requried for data type char 20
                                          numc 5
                                          numc 10.
    I need your valuable suggestions to this.
    regards,
    Swathi.K

    hi  swathi,
    goto se11.
    there select domain and press f4.
    now a pop-up window appears where u need to specify datatype and length  and press enter.
    now u can find standard domain elements for your particular datatype and length.
    give datatype: char
           length   : 20
    sample list of domains:
    ABI_DOCITM
    ABI_OBJCT
    ABLBELNR
    ABLLI
    ABSCHLGRP
    ACEPS_STATUS
    ACE_ARCH_PREP_STATUS
    ACE_CALC_VARIABLES
    ACE_GLSYMB
    ACE_SOP_STATUS
    ACTIO
    ACTIVITYID_BRO
    ADFDR_CHAR20
    ADFDR_DOCID
    ADPIC_DOM_PROCESS_CODE
    ADRESSE
    ADSPCIP_RANGE
    ADSPC_ANGNR
    ADSPC_SBNBR
    AFRUV
    AFW_TEXT20
    AII_NAME
    AIN_EPC_PREFIX
    AIN_SSCC
    AKB_TABSET_NAME

  • ALV, domain and F4 value ranges.

    Hi all
    I'm having trouble with getting F4 value range help up and running on a cell in my ALV. The main reason for my problems is because I'm not using a DDIC structure, but one I defined locally. The structure's field is associated with a domain type defined in the DDIC and as such I'd like to pull the value range from there.
    Here's what more-or-less what I'm doing:
    - Create a local structure type corresponding to fields of a DDIC table.
    - Select from the table into the structure.
    - Load ALV with structure.
    Is there anyway to get the F4 help on a cell?
    Ps. ref-table and ref-field doesn't work.

    As I'm not at the office at the moment I can't test anything, so I'll give you a progress update tomorrow, but in the mean time:
    Anjali - I'll have a look at that link. I'm still fairly new to ABAP so I can't tell off hand if that's what I'm looking for, but I'll know for sure when I have a look at the demo applications.
    Vijay - I do have value ranges for the domain of the type used by my structure. I believe ref-table and ref-field isn't working because my internal table is of type local structure rather than DDIC table type.
    Sekhar - I did try setting F4AVAILABL to 'X', but all that does is display the 'value range button' (which you can click to get the same effect as pressing F4), without actualling doing anything else.
    Thanks for the help thus far.

  • HOW TO ACESS DOMAINS VALUE RANGE PROGRAMTICALLY

    DOMAIN IS WITHOUT VALUE TABLE, BUT WITH FIXED VALUES,
    HOW CAN WE ACCESS THESE VALUES PROGRAMTICALLY,
    WELL NOT FOR VALUE REQUEST TO SEE THE VALUES BUT TO DISLPAY ALL THE VALUES ENTRED IN THE VALUE RANGE OF DOMAIN , WITHIN THE PROGRAM
    REGARDS

    Using the FM is probably the best way to go.
    report zrich_0001.
    data: idd07v type table of  dd07v with header line.
    start-of-selection.
    call function 'DD_DOMVALUES_GET'
         exporting
              domname        = 'RFBSK'    "<<--- Supply domain name here
              text           = 'X'
              langu          = sy-langu
         tables
              dd07v_tab      = idd07v
         exceptions
              wrong_textflag = 1
              others         = 2.
    loop at idd07v.
      write:/ idd07v-domvalue_l, idd07v-ddtext.
    endloop.
    Regards,
    Rich Heilman

  • Value range

    what is value range

    hi,
    Refer this thread..
    Re: can i create value range in domain
    Cheers
    Alfred
    Reward points for helpful answers.

  • RRI Problem: Transferring Value to a Value Range Global Filter

    Hi experts,
    I am facing a problem with the transfer of value during RRI jump. I have the following query definition:
    Sender Query: Customer ID, Billing Date, Valid From (<= replacement path "Billing Date"), Valid To (> replacement path "Billing Date")
    Receiver Query: Billing Date, Valid From (<= replacement path "Billing Date"), Valid To (> replacement path "Billing Date")
    The problem lies in Valid From and Valid To. In both queries, I have defined a filter replacement path variable with value range for these two characteristics:  Valid From (<= Billing Date), Valid To (> Billing Date). However, no values will be transferred to the Valid From and Valid To in receiver query and this triggers an uncaught exception during RRI call.
    Could anyone please shed some light in this issue?
    Thanks,
    Joon

    Hi Suman,
    yes, both queries are from the same InfoProvider. When I provide static single values for the From (<= 31.12.2010) and To (> 31.12.2010) dates in global filters of the receiver query, I get the correct result. If I instead select the Replacement Path variables I get exception.
    Regards,
    Joon

Maybe you are looking for

  • I don't know whether to get a new MacBook or not.....

    I have a 2007 MacBook. Cheapest one you could get, with the small screen. Specs are: - 2GHz Intel Core 2 Duo Processor - 1GB 667 MHz DDR2 SDRAM - Snow Leopard 10.6.8 When I go to get HD information it says this: Capacity: 79 GB Available: 47 GB Used:

  • User Password vs. Certificate based authentication

    We have used the iPhone since day one and grown from 20 to 400 users over the years. Now managability is an issue and certificate based authentication is about to be replaced with user password only. Critics deny cutting some slack because of possibl

  • Bug with Illustrator Line Tool

    Hi I am trying to draw a shape using the illustrator line tool, and it always seems to revert to 1pt when I am using it within a shape, even when I manually change it to 0.5pt in the top bar, it does not change. I will go larger than 1pt but not smal

  • Authorizing a computer to play songs

    With the new iTunes allowing for iPods to be on more than one computer I was wondering if I authorize a computer to play songs will it allow them to be played and that is all? I just need the songs authorized to play on a computer but if I do will th

  • After waking from sleep list of users is not displayed

    I have two users configured on my MacBook Pro.  With Snow Leopard, if a user put the compter to sleep, on wakup you could switch users.  After installing Lion, when a user puts the compter to sleep, only that user is able to wake it up. The screen sh