Values are not matching for inventory report

Hi all,
we are running the report stock over view, in that there is a key figure total stock which is having the non cumulative option
inflow and outflow
data has been loaded correctly but when we are executing the report it is giving the values cumulatively
that means
report containing material, plant and calmonth
we have the data loading from october onwords
suppose total stock is
10.2007= 10ST
11.2007=20ST
12.2007= 50 ST
it is giving the output
10.2007 = 10ST
11.2007 = 30ST
12.2007 = 80ST
it is cumulating the values
TOTAL STOCK is the business content object which is having the options
aggregation = sum
exception aggregation = Last Value.
can any one helps me on this issue.
Thanks & Regards,
Suresh.

HI,
Thanks for your reply,
we are not done any compression on the requests, but now deltas are running
is this is the problem cause for the report
if it is the problem hw we can resove it
can you please reply
Thanks & Regards
Suresh

Similar Messages

Grand total values are not matching with Detail report

Report has grand totals and when I drill to the detail report, grand total values are NOT matching with parent report totals, I did some analysis but I'm clueless on this issue.
Please provide your thoughts and insight on this issue..
Thanks

is your summary and detail reports hitting different facts, like summary hitting aggregate and detail report hitting it's corresponding detail level fact..?
if then,
From Front-end:
Fix the filter values in detail report that are passing from master report then try delete each columns then check the grand total. If you found your values is matching by deleting particular column then you need to investigate what is the issue around with that dimension table..
From Database side:
1. check first aggregate table has proper aggregate data of it's detail..
2. Take the detail report obiee generated query and try to comment each dimension table and it's corresponding joins to the facts, (before, this delete all the dimensional columns and other measures from select statement and put only that measure where you are getting wrong value, so that you need not to comment all the select and group by columns which saves your time.. ). Need to check by commenting each dimensional wid and it's table from clause, if you found that values is matching then there is some problem with wid columns data population in your ETL.
Is that BI-Apps project?
btw, whtz ur name?

Lov Values are not showing for Discoverer Reports in Application

Hi,
I developed some discoverer reports, those reports having parameters with LOV. Those LOV values are showing in Discoverer Desktop, but after registering those reports in Oracle applications those LOV values are not showing. Pls let me know how resolve this issue.
Regards,
Hanimi.

Hi,
Also it is necessary to know how the LOVs are defined. Are they based on Application flexvalues for example? In which case it may be that you have not got your NLS language parameters set correctly when connecting from Applications.
Rod West

Monthly Aggregate Values are Not matching between Two Reports

Hi,
I have two custom reports (Pivot Table View)
_1) National Report_ This report renders data for the 10/11 Season (From 04/01/2010 To 03/31/2011). It includes Monthly Aggregate as well as 10/11 Season Grand Total. This report shows the correct information. We don't have to do any changes.
_2) YOYOY Report_
This report renders data for the 10/11, 09/10, 08/09 Season (From 04/01/2008 To 03/31/2011). It includes Monthly Aggregate for each of the three seasons as well as Grand Total for each Season.
Issue:
Monthly Aggregate Total for the YOYOY Report is not matching with the National Report Monthly Aggregate Total.
Technical Background:
- For 10/11 Season, the expressions used to arrive at the Monthly Aggregate Total is the same.
- Filter Criteria for (1) Report is specific to 10/11 Season (Rest of the criteria is similar)
- Filter Criteria for (2) Report is for 08/09, 09/10, 10/11 Season (Rest of the criteria is similar)
- In Report (1), Date Expressions are based on the following Attributes
Column Name: Month
Expression: MONTHNAME(Activity."Created Date")
Column Name: Sort on Created Month
Expression: CASE MONTH(Activity."Created Date") WHEN 4 THEN 1 WHEN 5 THEN 2 WHEN 6 THEN 3 WHEN 7 THEN 4 WHEN 8 THEN 5 WHEN 9 THEN 6 WHEN 10 THEN 7 WHEN 11 THEN 8 WHEN 12 THEN 9 WHEN 1 THEN 10 WHEN 2 THEN 11 WHEN 3 THEN 12 END
Column Name: 10/11 Season
Expression: /* Metric column name: # of high risk infants identified since last visit */ CASE WHEN "- Activity Custom Metrics".S_INT_10 IS NULL THEN 0 ELSE "- Activity Custom Metrics".S_INT_10 END
Aggregation Rule: Sum
- In Report (2), Date Expressions are based on the following Attributes
Column Name: Month Column
Expression: Date."Calendar Month"
Column Name: Sort on Created Month
Expression: CASE Date."Calendar Month" WHEN 4 THEN 1 WHEN 5 THEN 2 WHEN 6 THEN 3 WHEN 7 THEN 4 WHEN 8 THEN 5 WHEN 9 THEN 6 WHEN 10 THEN 7 WHEN 11 THEN 8 WHEN 12 THEN 9 WHEN 1 THEN 10 WHEN 2 THEN 11 WHEN 3 THEN 12 END
Column Name: 10/11 Season
Expression: CASE WHEN Activity."Created Date" BETWEEN /* First Day of Current Season */ timestampadd(sql_tsi_day, -dayofmonth(current_date)+1, timestampadd(sql_tsi_month, -(month(current_date) - 4), Current_DATE)) AND Current_DATE THEN "- Activity Custom Metrics".S_INT_10 ELSE 0 END
Aggregation Rule: Sum
Key Information:
- For 10/11 Season, Activity."Created Date" attribute is used for all the calculations based on date.
- For 08/09 and 09/10 Season, Date.Date attribute is used for all the calculations based on date. This is because the data was migrated from Asset Record Type to Activity Record Type for these seasons.
I have tried variety of options and nothing seems to get the Monthly Aggregate matching. Kindly suggest what changes do we require.
Regards,
Muddessar Nadeem Alanji
+91-98456 13180

Hi,
Are you saying that you loaded the same excel document to both planning area and cube but the data in both is not matching??
How did you load the excel data to planning area?
Can you give more details on what data is not matching? Is the cube value smaller than the value you see in planning book?
Secondly if you are looking at data, make sure your selections are right. In cube, you have to specify the characteristics and at the bottom of the screen you specify the number of records to be displayed. Increase that to some big number like 9999 so that you can see all the records.

Fund center reports Assigned values are not matching with ledger balances.

Thanks for your Support. We have activated funds management in May-2009. And deactivated one or two times. Now the status is active.
Now we are taking reports the assigned values are not matching with gl ledger balances.
1. We need to update records for April- May.
2. Records in between deactivated and activate time.
Please suggest updating fund centers and commitments.
Regards

hi ELI
i have checked the follwoing secnarios
1. funds management deactivated.
2. one document posted with amount10000
3. funds management activated.
4. we have executed FMN0
here no document is selected after execution.
Please suggest what are the activities we need to do if i am wrong...
Regards

Report Painter values are not populating for a particular cost center

Report Painter(GR55) values are not populating for a particular cost center for the months of April 1 2011 where as for May onwards values are displaying correctly..We have check the transaction code KSB1 for this cost center there are some values posted for the period of April..
Can any one help me to find out where exactly the issue is and how to resolve the same..

Please check your variables in your report.

GR/IR A/c Amount and Amount in local Curreny values are not matching

Hello Gurus
When we are doing MIGO for some Scheduling Agreement PO's the Amount and Amount in local currency columns are mismatching with paise (+/-), eventhough PO belongs to Local Currency (INR). Because of this GR/IR account is not cleared after MIRO through F.13. Both MIGO and MIRO amount are showing as Open items.
Why it is happening and what is the way to clear GR/IR A/C. (F.13 with Tolerance limit is also not workout).
Thanks & Regards
Venkat.P

Hi sridhar
Thanks for reply
Through MR11 also these values are not cleared.
Regards
Venkat.P

Custom propertie's values are not updated for workflow metadata

Hi,
I've a requirement where I need to add and update some properties. to /etc/workflow/instance/<Instancename>/data/metadata node.
I've two workflow Process steps,
Process step 1:
    Adds some properties to metadata.
Process step 2:
    Updates the propertie's values which are added in Process step 1.
But the issue is update is not working when the node is /etc/workflow/instance/<Instancename>/data/metadata.
i.e. In the step 1, Properties are added to metadata node but In the step 2 propertie's values are not updated to the same node.
Here is my process code:
=================================================
import java.util.Locale;
import java.util.StringTokenizer;
import javax.jcr.Node;
import javax.jcr.Session;
import org.apache.felix.scr.annotations.Component;
import org.apache.felix.scr.annotations.Properties;
import org.apache.felix.scr.annotations.Property;
import org.apache.felix.scr.annotations.Reference;
import org.apache.felix.scr.annotations.Service;
import org.osgi.framework.Constants;
import javax.jcr.Value;
import com.adobe.granite.workflow.WorkflowException;
import com.adobe.granite.workflow.WorkflowSession;
import com.adobe.granite.workflow.exec.WorkItem;
import com.adobe.granite.workflow.metadata.MetaDataMap;
import com.adobe.granite.workflow.exec.WorkflowProcess;
import com.adobe.granite.workflow.model.WorkflowModel;
import org.apache.sling.api.resource.ResourceResolver;
import org.apache.sling.api.resource.ResourceResolverFactory;
import org.apache.sling.jcr.resource.JcrResourceUtil;
import org.apache.sling.api.resource.PersistableValueMap;
import org.apache.sling.api.resource.PersistenceException;
import org.apache.sling.api.resource.Resource;
@Component
@Service
@Properties({
       @Property(name = Constants.SERVICE_DESCRIPTION, value = "Test"),
       @Property(name = Constants.SERVICE_VENDOR, value = "Adobe"),
       @Property(name = "process.label", value = "Test 1")})
public class Test1 implements WorkflowProcess
    @Reference
    private ResourceResolverFactory resourceResolverFactory;
          public void execute(WorkItem workItem, WorkflowSession wfsession, MetaDataMap metadata)
                              throws WorkflowException {
                    System.out.println("Testing");
        try{
            ResourceResolver resolver;
            resolver = resourceResolverFactory.getAdministrativeResourceResolver(null);
            String instancePath = workItem.getWorkflow().getId();
            Node instanceNode=null;
            Session jcrSession = wfsession.adaptTo(Session.class);
           String payload = (String) workItem.getWorkflowData().getPayload();
           //instanceNode=JcrResourceUtil.createPath(payload+"/jcr:content", "nt:resource","nt:resource", jcrSession, true);
                              instanceNode=JcrResourceUtil.createPath(instancePath+"/data/metaData", "nt:resource","nt:resource", jcrSession, true);
                              System.out.println("Test: instance PAth:"+instanceNode.getPath());
            Resource resource = resolver.getResource(instanceNode.getPath());
                if(resource != null)
                    PersistableValueMap valueMap= resource.adaptTo(PersistableValueMap.class);
                    valueMap.put("name", "Rajesh");
                    valueMap.put("id", "A002");
                    valueMap.put("designation","SE");
                    valueMap.save();
                    System.out.println("Name:"+valueMap.get("name"));
                    System.out.println("Id:"+valueMap.get("id"));
            jcrSession.save();
            resolver.close();
        }catch(Exception e)
            System.out.println("Exception:"+e.getMessage());
===================
The code works fine when the node is payload/jcr:content.
Note : Process 1 and Process 2 code is same expect the values I'm passing to the PersistableValueMap.
Any pointers would be more helpful..
Thanks
Siva

Is there anything wrong in my code/ it's a bug..
Thanks
Siva

Lead time values are not appearing in the report for current year.

Hi friends,
Iam checking a report in production. where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
how can i get values in the report.
Thanks ,
VRV.

Hi,
Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
Eg: 5 Minutes + 5 Kilograms = 10
You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
Assign if helps...
Regards,
Suman

Heirarchy values are not displaying correctly in report.

Hi,
I am having a heirarchy field in my report.
I have 2 local RKF's in my report and 2 manadatory variables(which are FISCAL YEAR AND CAL MONTH).
When i am executing the report , it is displaying the Heirarchy values with respect to one restricted KF.
The heirarchy values correspoding to other RKF are not getting displayed properly, it is showing as (NOT Assigned).
Its giving the correct values for the RKF's but not showing the heirarchy values.
I hided the 2nd RKF, then also its showing in the same way.
Please help me on this,
Thanks in advance!

Hi, Saro,
>
I have taken a std. report to customize, and the name of the report is Asset Retirements from Fixed Asset module.
From the existing base query, i have added some query to customize it.
I have summed the cost column in the report using summary column.
For example, im passing a parameters which displays 5 lines in the report output. Im getting the cost value correctly in all the 5 lines, but when i tried to sum all the 5 lines, it is taking the first line of cost value and it is not summing the cost value of all the 5 lines in the report. I dont know why this problem occurs.
Summary column should be place one level up of the query and set the following values under summary
Function
Source
Reset As

Cost center plan values and Profit center plan values are not matching

Hi,
When user drill down the costcenter plan costs by partner in production system getting difference between P center values for a perticular functional area.
But this number should match with Cost center and P center functional are values but there under functional are showing lower amunts.
Pls let me know where exactly i have to check because i am fresher for controlling.
Please help me out.

Hi Anil,
If I understand your requirement then you want to plan both in USD and INR at the same time.
Say you maintain rate as 1 USD = 50 INR
Do you want to plan for 100 USD and 480 INR against one combination (Cost Center / Cost Element) and 100 USD and 520 INR against another combination of Cost Center / Cost Element?
SAP allows you to plan for a Cost Center / Cost Element combination only once. And that you can plan in any currency. Either in CO Area Currency or Object Currency (in this example Cost Center Currency) or in Transaction Currency (any other currency that you may choose). And the other currencies gets derived from the Exchange Rate maintained in the system using OB08 tcode. The exchange rate will be derived using the Planning Version "Exchange Rate Type" and "Value Date" (See Fiscal Year settings for Planning Version).
So, if you plan in INR it gets translated to USD and vice versa. For planning in different currencies (only one is allowed) you need to change the planning layout to include the Amount Currency field.
So for a single version say V1 you can plan in INR which gets translated to USD using OB08 exchange tare. Again you can plan in version V2 in USD which will get translated in INR using the same OB08 settings but you need to use a different Exchange Rate Type for V1 & V2.
I am not sure what the business requirements are. If the requirements are only to display different currencies in a report then that can be achieved by creating a Report Painter report.
Hope this helps.
Thanks,

Characteristic Values are not updated in COPA Report

Dear Gurus
I have created one characteristics and derive the value out of derivation rule but the same is not appearing in the COPA Report even though I mapped that Characteristics in my COPA Report. Please advice and help.
Sivakumar Subramanian

Dear Jayaram
While creating the Derivation Rules I checked the derivation is working fine or not by giving the inputs and it is working and no error in deriving the characteristcis.
Please help.
Sivakumar Subramanian

OBIEE 11g Report-When drilling down to lower level, totals are not matching

Hi All,
I am creating a report in Analytics 7.9.6.3 , OBIEE 11g - Let’s say Budget Cost/Actual Cost based on the Date Dimension
Have selected the Fiscal Year Dim, Fact Budget Cost, Fact Actual Cost
FY BCost ACost
2011 100 120
2012 150 140
Total 250 260
But here when I am drilling down from Year to Quarter and Period - The values are not matching with the totals....
FY FY Qrt BCost ACost
2011 2011 Q1 80 100
2011 Q2 100 90
2011 Q3 110 120
2011 Q4 90 130
Total 380 440
Fiscal Year, Fiscal Quarter Budget Cost and Actual Cost are not returning correct results – When selecting cost's by fiscal year, or filtering on a specific fiscal year, the amount returned does not equal the fiscal year total;
when I am drilling down to Quarter and Period Level the BCost & ACosts are bumping the Numbers as above and not matching with totals
Any suggestions?

Check out the query in both the times.Execute against database and try to sum the data for quarter/period and compare it with Year data.
Just try to differentiate is it a report total that is getting wrong or the data in the database table itself is getting wrong stored.
Mark as helpful if it helps.
Regards,
Veeresh Rayan

Totals for CKF are not matching

Hi All,
We recently upgraded to BI7 and we created Aggregates in the system. We have few calculated key figures (CFK) in the system. When we execute the queries they are not hitting the aggregates in the system because of the property, calculation before aggregation.
We changed that property calculation before aggregation to calculation after aggregation then the queries are hitting the aggregates. So we moved the aggregates to BQ and BP. There the values for the totals in the report are not matching. For ex: we have value 10 for a CKF in five rows then the total in the result row should be 50 but that is not the case now, it is showing as 45 or 55 some value. The totals are not matching in all the reports where this CKF is involved.
But when we keep the calculation before aggregation property as it is, then the total values for this CKF are matching in the report. But now the problem is that the queries do not hit the aggregates.
So instead of going for a CKF we tried with creating a formula in the query with the same calculation as it is in the CKF, but for that formula also the total values are not matching. When we check and compared the formula calculation with other CKFu2019s in the system, we found out that those CKFs which involved the calculations such as multiplication and division the totals are not matching but if the CKF is containing addition and subtraction then the Totals are matching. This is the same case in across all the systems except in Production.
We have testing system (BT), which is a copy of production; the totals are matching for this CKF in one report. But if we include the same CKF in some other report then the totals for this CKF are not matching in that report.
We are unable to figure out why the same CKF with same properties and calculations is not behaving in the same way across all the systems. If anybody comes across such issue please let us know how to proceed further.
Thanks for your patience.
Hope for your response...

Hi himanshu,
If you are using Addition, subtraction with Multiplication & Division, just maintain all in the Sequence how you required using brackets.
If you are using formula in Row & Column also try to use formula Collision.
http://help.sap.com/saphelp_nw04/helpdata/EN/d2/02223c5f00612be10000000a11402f/content.htm
Regards,
Rajdeep.

Open Item and Line Items are not matching

Hi Gurus,
I ran the EFT for vendor #1600109 for payment on 10/18/07. If I run the vendor open items report (ZFI019) for today, it shows the balance net of the EFT that is $203,466 ( $263869 - EFT Value is $60,403).
When I ran the vendor line items display (FBL1N), it shows all the invoices including the invoices paid on the Oct 18 EFT $263,869 which is (2034,66+60,403).
User wants the open item report should tally the line item display.
I will assign good points.
Thanks for your help
Prashanth

Hi Gurus,
EFT is working fine. But the Vendor Open item Report (Custom Report) and Vendor line item report (FBL1N) is different.
We are looking a balance for a vendor as on 15th where the balances are not matching between the reports but if i run FBL1N on 18th the balances are matching.
Clearning date is 18th
Posting Date is 15th.
Thanks
Prashanth

Values are not matching for inventory report

Similar Messages

Maybe you are looking for