Values coming in to PSA but not in to the Data Target
Hi BW Guru's
I have done minor enhancement on Master Data Data Source and replicated in BW System the values are coming up to PSA for the particular field but not in to the Data Target. Can any one help me on this issue. Your help will be appreciated.
Thanks in Advance,
Venkat
Hi Venkat,
Your datasource has been changed, but infosource and transfer rules - are not.
So, you'd better delete datasource - infosource assignment. Then replicate datasource again. Activate transfer rules etc.
Best regards,
Eugene
Similar Messages
-
Sp L records are coming to the PSA and not updating in the data target
Special Ledger records are coming to the PSA and not updating in the data target in the month end and the info package is failing - because of that we are doing manual updating from PSA to the data target -
Can so one can tell the reasons why this is happening? And give the solutions to it?Hi Sankar,
If your Infopackage uses Only PSA and Update subsequently in Data Target on the Processing tab, then you will need to add a process for Read PSA and Update Data Target in your process chain, after the Infopackage load process. Then it will take data from the PSA and load to the data target.
Hope this helps... -
JDBC sender channel running but not picking up the data from sp
Hi,
One of the jdbc sender channels in production is running at its schedule time but it is not picking up the data from the sql side, we have checked with the sp side and they are saying that sp is running fine. No changes have been done in its configuration. Last message coming in RWB is Retry interval started but that is of 1 day and its already been 3 days. I tried by starting and stopping the channel but of no use. The channel was re activated but that also didn't help.
Please help, what can be the reason for the same.
thanks.Hi,
The JDBCadapter ( The respective channel) is definitely locked in PI . Ideally for each polling interval a lock is being created and once the processing is over , the lock should be released/deleted automatically to allow further polling interval. If the lock is not released by the system automatically,further polling will not happen as expected. ( This may affect all sender JDBC adapters as well. I would recommend to do a check in all sender JDBC communication channels)
You can see/delete the locks in Visual admin.
Go to Server>Services->Locking adapter and click refresh
The entries for JDBC adapter ( with name $XIDBAD.JDBC2XI) should be deleted by selecting those particilar entries and click delete selected locks.
If you have more than one node, then same should be done in all server nodes.
The temprory solution would be creating/copy the existing channel in ID with same properties and assign it into particular sender agreement.
But, the lock may be created again which potentailly stops all your database interfaces. Hence i would suggest to use Disconnect From Database After processing of Each messages in Advanced tab in the sender JDBC adapter.
Hope this solves your issue.
PS: The same bahaviour would expected for all file adapter as well -
Load status in PSA "Request not updated to any data target using delta"
Hi,
I need to delete the Unwanted request from PSA with status u201CRequest not updated to any data target using deltau201D
There are lot of requests are there in PSA but some of them loaded with status
u201CRequest updated in Data targetu201D u2013 I donu2019t want delete this requests.
Others u201CRequest not updated to any data target using deltau201D -- need to delete
We are deleting manually every week end.
Is there any program or tables which can delete automatically unwanted u201C Request not updated to any data target using deltau201D requests from PSA.
Thanks for your help in Advance,
Raj.Hi Rajesh,
You may create a simple process chain, where you could include the variant "Delete PSA Request".At the bottom of this variant maintenace screen you would find options exactly matching your requirements.It's a very simple option and should not take you more than 5 minutes.
Best Regards,
Bansi. -
Request (PSA) was NOT posted successfully to data target (InfoCube)
In our daily load process chain I am getting an Error Message for "PSA to InfoCube" as:
Request was NOT posted successfully to data target (InfoCube)
Message no. RSMPC163
Please what is the exact problem it means & what is the solution
Rajesh GiribuwaHello Rajesh,
This requests fails when updating from PSA to Infocube.
Pleaes check the update rules for errors.
Try to find out the exact error message and explore the tabs in monitor for this job.
Hope this helps..
thanks, -
Not updating to the data target
hi experts,
iam laoding data from cube1 to cube 2.
in the cube2, i made some update routine like if 2 key figures are so and so add new field with some value.
in the simulation it is showing correct values, but it is not updating in to the data target.
please treat this as urjent.
regards
kumarHi,
Where have you written the code ? - In Start Routine or in the Field Routine.
I would advice to write in the Start Routine.
Let's assume you write the code in the following way.
LOOP at Data_package.
IF Data_package-field1 = 'X' and Data_package-field2 = 'Y'.
Data_package-fielld3 = 'A'.
ELSE.
Data_package-fielld3 = ' '.
ENDIF.
Modify Data_package. ---> This is the most important one.
ENDLOOP.
Hope this helps.
Regards,
Balaji V -
Value '61218XZEF ' from field ANZVERTR is not convertible into the DDIC
Hi All,
I struggling with this error can anybody pls help me.
<b>Value '61218XZEF ' from field ANZVERTR is not convertible into the DDIC
data type DEC in data record 1 . The field content could not be transferred into the typed transfer structure.</b>
This is occuring only in Prod, i have tested the same in Dev & QA but i didn't get this error.
here the R/3 field ANZVERTR of type DEC length 6 is assigned to infoobject 0UCCNTRCNT of type DEC length 17 ( data element /BI0/OIUCCNTRCNT).
i dont think its a problem right coz the infoobject has same type and larger size.
i have another 3 fileds with the same problem.
Is it a problem in BW or probelm in data being uploaded from R/3 side. coz the hasn't received in BW yet. the error says " The field content could not be transferred into the typed transfer structure"
Even i have PSA in parallel but data hasnt even came to PSA.
when i check job overview in R/3 i saw a msg " Function module /BI0/QI0UC_SALES_STATS_020001 does not exist"
when i checked this FM with other guy( coz i dont have access) it is there and is active.
Pls anybody help me.
Regards
Robyn.Hi Arvind,
That filed is a keyfigure coming from standard datasource 0uc_sales_stats_02 it uses various different tables, iam not able to figure out where is it comin from.
Is it sure that the problem is in R/3 side???
if it is a problem in BW at least that data should have come through to PSA right??
keyfigures coming from std. datasources goes through various extraction programs, its not field to field mapping from R/3 to BW in case of key figures i guess. correct me if im wrong.
Regards
Robyn. -
Sales tax in PO but not included at the time of GR
Hi,
i have creted the PO including sales tax amount, is there any way when i post the GR against this PO the sales tax amount not calculated.Hi,
In response to your requirement:
let me clear my business scenario...
total price of po is usd100 and sales tax is 20%.
system calculate sales tax separate the reason being the codition type for sales tax is statistical.
is it possible that the value of sales tax included in the PO net price but not calculate at the time of GR.
Regards,
Ali
This is very much possible. Include your tax condition type in the calculation of net price and make this tax as deductible.Donot assign NVV key to it.
Also donot make it statistical as you want to include it in the net price calculation.
Thanks,
Atal -
Custom field values are not storing in the data base
Hi Friends,
We have created one Custom field called ZZ_APPROVER in Rfx Header , we have included this field in the below stuctures
1.INCL_EEW_PD_HEADER_CSF_BID
2.INCL_EEW_PD_HEADER_CSF
The data type of this field ( ZZ_APPROVER ) is CHAR and the length is 1 . we have given 2 fixed values in Value Range
1 -
X+2 Approver
2 --- Provisional Approver
so when we select either 1 or 2 ( in Drop Down ), its displaying properly on RFx Screen, but when we try save this document the values are not strong in the data base.
Can any one give me idea why its not stroring in the data base
Thanks in Advance
Kumar SriniHi Ganapathy,
A Record is created in table BBP_PDHSC , for other z fields, the values are stroing , but for this field ( ZZ_APPROVER ) [ drop down list ], the value is not stroring
Thnx
Kumar Srini -
PSA showing Request not updated to any data target using delta
Hi BWers,
I am very new to SAP and have a IDES installed with BW. I am trying to do a simple data load from a flat file. I have managed to create a InfoPackage, but when I schedule it and then go into the data source -> manage and look at the screen :
Requests for PSA /BIC/Bxxxx
I see the Request updated having a Red triangle with an exclamation mark in it and it says
"Request not updated to any data target using delta"
Wondering if someone can help me resolve this so that I can further create a DTP and load the data into the InfoObject.
Thanks for all your help.
ManishReg : Delta Load : Production Data
Current Scenario :
we have existing system pulling data from 0CO_OM_WBS_6 ,ZPS_0CO_OM_NWA_2
Structure underlying infocube:
2 Data Sources >> 1DSO >>1 Infocube .
Usually the Data is loaded in delta format on daily basis using process chains.
For last one month the delta is not picking properly :
Example :
A WBS Element is created 2 years back and it open and getting its update into BW ,
latest amount or cost incurred for the WBS Element is not picked for certain WBS only :
I have Tried Giving a Full Infopack load to the DSO , but as DataStructure was migrated from 3.5 to 7 landscape :
its showing this error:
Request not updated to any data target using delta,
i went and created DTP which didnt help much Because latest isnt caputered .
if i goto RSA1old and find the full req and trigger it ,it says inti overlapping ,
how to over come this as this is a production issue
Obaid : pls help me on this issue , any others expert pls help -
2nd gen A TV I can hear but not see on the TV when trying to stream TV from the iPad2
2nd Gen ATV I can hear but not see on the TV when trying to stream TV from the iPad2
You can look at the ipad under settings, general, about and see if it's 4.3.3.
Or when you connect the ipad to the computer with itunes, it'll tell you on the first tab if you need an update. -
How do I import a playlist on home sharing? I get the songs, but not packaged in the playlist from which they were imported. Now I have duplicate songs in my music library.
You can't import media from one Home Sharing library to another by any other means except selecting the individual items you want to import. For example, you can't select a playlist and then click on the 'Import' button to import all the items in that playlist. You have to select all the items in the playlist before you can click on the 'Import' button. By extension, the playlist on the other Home Sharing computer will not be re-created on your computer. You can select more than one item using the 'Shift' or 'Command' keys.
What you can do is create a playlist on your computer first, with the same name if you want, and then use drag and drop to copy the media from the remote playlist to your playlist. Note that the playlist on your computer cannot be a 'Smart' playlist it must be a regular playlist for drag and drop copying to work.
Regarding 'Smart' playlists. If you create a 'Smart' playlist on your computer that uses the exact same filtres as the ones on the remote library when you import the media from the remote library they will show up in the same 'Smart' playlist on your computer. -
Editing a movie that was already cut together without transcoding .h264 footage to proresslt. I want to transcode full clips that are used in the edit, but not any of the leftovers. Is there an efficient way to this?
I'm thinking I can convert the files with Compressor and place them in a new folder with their original file names (not sure how to get compressor to do this yet) and then do a major "Reconnect Clip" afterwards.
Not sure if there's a more efficient way to get all the clips in the timeline to compressor. I want the full files, not a sequence export. I can go through one clip and a time and add the master file. I'd rather not.
The more automated processes the better.
Thank you. I'm currently working so I don't have the time to scour the forums. Help or links to help would be greatly appreciated.
Byeah Media reconnect can be an issue.
Will Media Manager convert files? Another thing I was thinking was to Media Manage the sequence out, copying all the used files to a new folder, and then running that through compressor. But it still leads to a massive reconnect. Fine tuning all those edits would be less involved than re-editing the whole thing, I hope. -
Is the retina display for the new mac book pro worth the extra cost? I'm buying a new mac book pro but not sure about the retina display.
There is a US$10 adapter from old power adapter to new MacBook Pro.
MagSafe to MagSafe 2 Converter
The MagSafe to MagSafe 2 Converter allows you to use the MagSafe connector on your LED Cinema Display, Thunderbolt Display, or MagSafe Power Adapter to charge your MagSafe 2-equipped Mac computer.
For battery life, check the latest Software Update for the fix for most problems. -
I have started my computer in safe mode as recommended but not long after the grey Apple icon appears with the spinning gear it automatically shuts down! any suggestions?
Try these options:
Credit Kappy.
This support article addresses a 'blue scree';
http://support.apple.com/kb/PH7212
Ciao.
Maybe you are looking for
-
How to make the 'Finish Date' field Editable in Project server 2013
Hi All, In Project server 2013 on premises deployment, When I try to create a new enterprise project [Also in case of new custom project type], Only the 'Start Date' field is available. The 'Finish Date' field is by default taking the value of the 's
-
The "Not" expression bug of Oracle BPM Studio 10.3.0.0.0
I'm new user of BPM. And I took part in the training cause in Oct 9th-10th in Guangzhou Oracle. I found a potential bug when I practise the tutorial in Oracle BPM(BEA) Studio 10.3.0.0.0. Because the Comfirm Report activity in the tutorial can't go ne
-
Lost unknown item from Finder sidebar
Hi, I just accidentally deleted an item from the Finder sidebar, under the "Devices" section. I don't know what it was but I think it may be important. Is there any way to find out? Thanks, Bruce
-
Hi All, Please tell me what is the use of Service type GRPO
-
How to keep the internet security setting when I restart
Hi, I have a windows 7 professional sp1 and would like to know how can I enable the "Launching applications and unsafe files" local policy and keep enabled in spite of restarting the computer. Now if I restart pc this local policy is Not defined aga