# values for navigational attributes in report . (Urgent)

Hi Gurus,
I have a navigational attributes for time dependent master data. In the report I am not able to see values for that navigational attribute. I see # values for the navigational attributes. I checked the master data of main info-object. every thing looks fine.
please help me in regarding this.
thanks,
Regards,
Aarthi

Check the following two things again just to make sure you are doing everything right. These are already mentioned by Bhanu...
1) Go to the master data table (Q table or the M table) and check to see if there are M version records (OBJVERS = M). If yes, you need to activate the master data using the program RSDDS_AGGREGATES_MAINTAIN (Change Run). If there are no M version records then check the second step
2) If you do not enter any key date in the query, it takes the system date as the default key date. So check and see if any master data exists for today's date ?
Also just curious, which version and support pack level are you on ?

Similar Messages

How to identify display and navigational attributes in report?

To all of thanks to be in SDN, plz send tue clarifications.....?
Q. How to identify display and navigational attributes in report? is there any naming convension differences for both of them?

This works fine for "powerusers", but for informational users you have to create your own naming conventions for all navigational attributes which are not unique. For example 0COUNTRY may be a navigational attribute of 0CUSTOMER, OSOLD-TO, 0SHIP-TO, 0BILLTOPRTY, 0PAYER. To make the text clear for your users in reports name it CS Country, SO Country, SH Country, BT country, ... as 0COUNTRY could also be a characteristic from the document.
This means quiet some work especially if you have a multilingual installation, but the information users will be very thankful.
hope this helps
mich

Data for navigational attributes # Not Assigned

Hello friends,
Our report is based on Multiprovider which is based on 5 cubes.
These five cubes has one particular Characteristics which hasnavigational Attribute .
We are using the navigational attribute directly under free characteristics Tab in Query.
We are also using Characteristic in Query - for characateristic data is shown in report.
In report we are able to see data as # Not Assigned for navigational attributes.
When we checked data at info object level for that characateristic, correct data is shown for that navigation attributes.
We have checked following settings
At characteristic level - Uncheck Attributes only
At cube level all navigational attributes are checked
In Multi provider identification table - This navigational attribute is checked for all five cubes
In Multi provider Navigational Attributes Tab - This naviagtional attributes is checked
Activation of Master data was done once again
we are not getting any other ideas, can any one please suggest us where the problem is?
Thanks
Tony.

Hi Tony
I have the exact same problem. Did you find out what the problem was?
KR Nete
Edited by: Nete Grøn Jacobsen on Jul 14, 2008 1:51 PM
I solved my problem
1. Activate the navigation attribute(s) on the underlying basiscube, from which the query displays data
2. Choose the navigation attribute(s) for all relevant basiscubes (multicube -> Change -> Button Identification)
See also:
KR Nete

Path Not found error when try to drag Navigational attribute in report

Hi Gurus,
I have created report on Multiprovider. When I try to drag navigational attribute in report getting error path not found.
I have checked Following and it's Proper.
1) Multiprovider is active
2) whether Navigational attribute is identify assign in cubes.
3) whether sid table thr for info-object.
4) I could see data in Multiprovider as well as in Cube
I created report on cubes also and getting same error.
Please suggest.

Hi,
Please ensure that the navigational attribute is checked at the attribute level and also at the Infocube level and also check that correct mapping of this navigational attribute is done at the Multiprovider level.
Thanks,
Venkat

How to define a Value for an Attribute of an Class

Hi,
How to define a Value for an Attribute of a Class ...
( I need to change the value of an Attribute of a class in standard program ....
Ex...
   cl_hrce_masterswitches=>infotype_framework_is_active
Here infotype_framework_is_active is the attribute .. its value in standard program is 'X'... Now i need to change it as ' '.
How to define it and set value as ' '.

Hello Surendar
The static attribute INFOTYPE_FRAMEWORK_IS_ACTIVE is read-only and there is not SETTER method to manipulate its value.
However, the attribute is filled in the CLASS_CONSTRUCTOR:
METHOD class_constructor.
    IF ce_is_active                 = true OR
       global_payroll_is_active     = true OR
       mngmt_global_empls_is_active = true.
      infotype_framework_is_active = true.
      perid_infotype_is_active     = true.
    ELSE.
      infotype_framework_is_active = false.
      perid_infotype_is_active     = false.
    ENDIF.
ENDMETHOD.
Thus, you need to analyze how attribute CE_IS_ACTIVE, GLOBAL_PAYROLL_IS_ACTIVE and MNGMT_GLOBAL_EMPLS_IS_ACTIVE are filled in the CLASS_CONSTRUCTOR.
For sure you will find customizing settings that are responsible for this.
Regards
Uwe

Multi-Provider Provider-Specific Properties for Navigational Attributes

Experts,
I need to over-ride the naming for a navigational attribute in a multi-provider.
For non-navigational attributes you simply use the Provider-Specific Properties. This selection is not available for navigational attributes.
Is there a different way to apply alternative naming to navigational attributes in a Mult-Provider without affecting the global definition in the base cube.
Thanks in advance

No - the users want their own verions of the name as default
Thanks for the reply

Setting up default value for POV in Financial Reporting Studio

hello
We need to Set up default value for POV in Financial Reporting Studio. For example, we need period to pick up Sep as default value when we run the report.
Is there any way we could do this???
Regards
Neha

Hi Neha,
Yes, there is a way to setup of your grid POV. Take a look at this: http://download.oracle.com/docs/cd/E12825_01/epm.111/fr_user/127.html
Cheers,
Mehmet
p.s. Please mark the answers helpful or correct, if they've helped you or answered your question. Thanks!

How to show data for navigational attribute in a report ?

Hello all,
I have a hierarchy info object A which has a navigational attribute(hierarchy) B. I need to filter on B for a particular node.
I have added A in the filter column and selected B as the attribute. How can i restrict B for a particular hierarchy node ?
Any help will be appreciated.
Thanks in advance
S N

Hi,
Have you defined 'B' as Navigational attribute at InfoProvider Level?
You can Restrict B for a Particular Value once it is defined as Navigational attribute at InfoProvder level.
Go to InfoProvider maintaince>click 'nav attributes'>enable it (check the box).activate the InfoProvider.
Then you can see it under same dimension where 'A' is assigned and its name would be A_B.
Drag and drop in to rows and restrict(include/exclude) with required value.
thanks
Message was edited by:
Murali

Reg: Display of Navigational attribute in report

Hi All,
I have a report built on the multiprovider which contains two cubes say CUBE1 and CUBE2.
I can see two rows in the report; each row corresponds to these cubes.
I have customer field and a country field in the report. Country field is maintained in the master data of the customer and is a navigation attribute in the report.
I can see the Customer filed in the report output but the country field is not showing any value.
Country field in the customer master data.
Please provide your inputs, why I am not getting the values in country field.
Regards,
Vijay

Hi Vijay,
Check the following.
1. Check if the data is available for country field in the customer master data.
2. Open cube 1 and check in the navigational fields, Contry is marked or not. If you want to use it in the report, Country field which is in a customer master data, should be marked.
3. Same way check in cube 2.
4. Open your multi provider, mark this navigational attribute if it is not marked, and assign it to the cube by right click-> identify.
if the data is avaialble in the master data, your problem will be solved.
- Jaimin

How to see Navigation attribute in Report

Hi ,
I am working on BI7.0.
In my Query , material is a characteristic which has 3-4 Navigation attributes. But when I execute the report , I can only see Material data displayed (because only material is in the rows). I also want to see data of its attributes in report results. I dont have authorisation to change the query.
Also I am unable to open the Query in Local view (some connectivity issues).
Can you please suggest How I can drill-down those attributes.??
Also these attributes are not visible in free characteristics.
Thanks,
Su

Hi there,
To use the navegational attributes with drill down, they have to be available in either rows, columns or free characterisitic.
For that you have to edit the query. There's no other way.
But each navegational attribute is also a display attribute.
Therefore, you can after executing the query, right-click over material and select properties. You'll see a tab named attributes where you can add the avilable attributes to the left (so they will be displayed), and change the settings of each one of them (see only key, key and text, etc.), but you can't filter by any of those attributes, or do any drill down options over them. They are only display attributes.
Hope this helps.
Diogo.

Authorization for navigational attribute

Hi Gurus,
I am facing an authorization issue with respect to infoobject hierarchy. I have created authorizations as below.
There one infoobject 'A' and a navigational attribute 'B' in infoobject 'A'. This navigational atribure A_B is used in an infocube. And hierarchy is uploaded to Infoobject 'B'. Now I want to give authorization for this hierarchy in infoobject 'B'.
Now coming to authorization.
1. I have made Infoobject 'B' as authorization relevant in Business explorer tab.
2. Created authorization object say ABC in RSSM and inculded infoobject 'B' & 0TCTAUTHH (since I want to authorize the hierarchy and we are using 3.5 authorization concepts in BI 7.0).
3. Activate this authorization object for the infocube.
4. Included this authorization object in the role included for my user. In the field 'B' of authorization object I have given ' ' (space) and in the field 0TCTAUTHH I have given the technical name of the hierarchy.
4. In 3.5 query designer I have put this navigational attribute A_B in the filter area and activated the hierarchy in the properties tab for the same hierarchy that I inculded in previous step.
5. Created a variable with processing type authorization.
Now when I run this report I get an error as no authorization for object ABC.
Can someone help me if I have done anything wrong.
Thanks,
Sandeep

Hi,
In the infoobject A maintenance screen check the chekc box for field "AuthorizRelevant" for B to make it authorization relevant navigational attribute.
Then go to RSECADMIN and ope your relevant authorization.
In the menu bar just above the "Authorization Structure" you will find the button with icon of infoobject.
Chick on this icon this will give you a screen to enter characteristic name of which attributes are to be added to authorization.
Enter the infoobject A name here and click on continue.
This will give you list of all authorization relevant navigational attributes present for A.
Add B from this list to the authorization.
Hope this helps.
- Geetanjali

Navigational Attribute in Reporting

Hi experts,
Suppose I have created one attribute as navigational attribute in my infoobject characteristic.This Characteristic is in Infocube.
Now after executing query on this infocube,Can I drilldown from thic characteristic to Navigational attribute to analyse my results more?To achieve this,is it necessary to Switch On my navigational attribute in Infocube?or Can I achieve this even without switching navigational attribute in my infocube?
rgds,
P Olin

Hi experts,
Thanks for your replies.
Suppose if I donot want to create Navigational Attribute,how can I do technically,so I can drilldown to this characteristic from my original characteristic infoobject in the report to see more analysis...
I am thinkiing of creating hierarchy manually from top to bottom by creating one characteristic and adding it as 'external characteristic' in hierarchy tab of my infoobject characteristic which has this hierarchy..Is this an option?Can I still drilldown and see detailed analysis in my reports?
Thanks for your replies.
P Olin

Variable for navigational attribute affected fiscper input variable

Dear Friends
Initially, the query is having an input variable for fiscper. The query was able to run properly.
When i add a input variable for a navigational attribute to the same query which is based on multiprovider, the fiscper input variable is no longer seen.
So, I removed the global filter for the navigational attribute and it is ok again. I fixed a value for the navigational attribute at filter level is also fine.
Please advise what could be the cause. Thank you so much.
Best regards
Bass

Hi Bass,
Again seems to be a strange issue, if you have two independent characteristic with two different input enabled variables then there is no reason for the variable to not to show up on selection screen.
Once you add the new variable and save the query just make sure that you have earlier variable as it is and check the query properties popup and see the fiscper variable sequence in the variable list.
Regards,
Durgesh.

Missing some values for Navigation attr

Hi All,
1.     We are using a Navigational attr for an MD Info object
2.     This Nav attr is used in Cube(Checked box - as Nav @ cube level)
3.     Problem is : I am able to see all Navigation attr values data , but randomly missing some values for this Nav attr.
u2022     What is the reason?
u2022     Please advise step wise..Any seetings I missed?
Thanks ,
LN

Cube neednot display all values of your navigational attributes.It displays only value for which it recieved the main infoobject.
eg :assume 0MATERIAL and nav attr say A.
Then only values for 0MATERIAL which is present in the cube the nav attribute will be displayed.
Hope this helps.

How to show multiple values for Unique records in Report

Here's my question/problem:
I've joined two tables, one table (TBL1) contains an object id (OBJ_ID) that repeats and the other table (TBL2) contains a date (DT), object type id (OBJ_TYP_ID), and object type description (OBJ_TYP_DES). The tables are joined by an inventory id (INV_ID).
The OBJ_ID repeats and has a Date value for each record. I want to report an unique OBJ_ID and show each Date for a particular OBJ_ID in multiple Columns.
An example of the current resultset looks like this:
OBJ_ID OBJ_TYP_ID OBJ_TYP_DES DATE
1 1 TYPE1 4/1/2009
2 1 TYPE1 4/1/2009
3 1 TYPE1 4/10/2009
1 2 TYPE2 5/3/2009
3 1 TYPE1 3/30/2005
4 1 TYPE1 4/1/2009
5 1 TYPE1 4/1/2009
5 2 TYPE2 5/1/2009
1 1 TYPE1 4/3/2007
1 1 TYPE1 3/30/2005
I want to express the resultset like this:
OBJ_ID OBJ_TYP_ID OBJ_TYPE_DES DATE1 DATE2 DATE3
1 1 TYPE1 4/1/2009 4/3/2007 3/30/2005
1 2 TYPE2 5/3/2009
2 1 TYPE1 4/1/2009
3 1 TYPE1 4/10/2009 3/30/2005
4 1 TYPE1 4/1/2009
5 1 TYPE1 4/1/2009
5 2 TYPE2 5/1/2009
What technique is best to use to do this? I know I could create another table and populate the rows/columns by reading data from this query, but is there a better way?

Hi,
cclemmons wrote:
I want to express the resultset like this:
OBJ_ID OBJ_TYP_ID OBJ_TYPE_DES DATE1 DATE2 DATE3
1 1 TYPE1 4/1/2009 4/3/2007 3/30/2005
1 2 TYPE2 5/3/2009
2 1 TYPE1 4/1/2009
3 1 TYPE1 4/10/2009 3/30/2005
4 1 TYPE1 4/1/2009
5 1 TYPE1 4/1/2009
5 2 TYPE2 5/1/2009
What technique is best to use to do this? I know I could create another table and populate the rows/columns by reading data from this query, but is there a better way?Absolutely! You seem to have an instictive feeling that creating a separate table just for a query is inefficient. You instinct is 100% correct. Maybe in Oracle 7 there was a reason to do that, but today you can query results of other queries as if they were tables, so temporary tables like you describe are very rarely necessary, let alone convenient.
What you want to do is pivot the date columns. Here's one way
WITH     original_query     AS
     SELECT obj_id
     ,     obj_typ_id
     ,     obj_typ_des
     ,     dt          -- date is not a good column name
     FROM     ...          -- the rest of your original query goes here
,     got_rnum     AS
     SELECT     oq.*
     ,     ROW_NUMBER () OVER ( PARTITION BY obj_id
                               ,                    obj_typ_id
                         ,             obj_typ_des
                         ORDER BY        dt     DESC
                       )         AS rnum
     FROM    original_query        oq
SELECT       obj_id
,       obj_typ_id
,       obj_typ_des
,       MAX (CASE WHEN rnum = 1 THEN dt END)     AS dt1
,       MAX (CASE WHEN rnum = 2 THEN dt END)     AS dt2
,       MAX (CASE WHEN rnum = 3 THEN dt END)     AS dt3
,       MAX (CASE WHEN rnum = 4 THEN dt END)     AS dt4
,       MAX (CASE WHEN rnum = 5 THEN dt END)     AS dt5
FROM       got_rnum
GROUP BY obj_id
,       obj_typ_id
,       obj_typ_des
;As you can see, this adds two layers of queries on top of your original query. One of those layers is probably not needed; depending on what you're doing in your original main query, you can probably compute rnum there, and omit the got_rnum sub-query.
Also, depending on the relationship of obj_id, obj_typ_id and obj_typ_des, some of what I posted above may not be needed but including it won't really hurt.
If you want to know more about this technique, search for "pivot" or "rows to columns". A <tt>SELECT ... PIVOT ...</tt> keyword was introduced in Oracle 11, but most of what you'll find when you search for "pivot" doesn't assume you have Oracle 11 (nor does the query above require Oracle 11).
This assumes you know an upper limit (5 in the example above) of dts that can appear in any line of output.
See [this thread|http://forums.oracle.com/forums/thread.jspa?messageID=3527823&#3527823] for a discussion of some alternatives.

# values for navigational attributes in report . (Urgent)

Similar Messages

Maybe you are looking for