Values not appearing in Controlling reports

Hi Gurus,
For following reports I am not getting any values .Is I am missing any configuration.My client needs to be resolved on top priority.
S_ALR_87013139 - Target/Actual/Production Varainace - Cumulative
S_ALR_87013140 - Target/Actual/Production Varainace - Periodic
S_ALR_87013142 - Target/Actual Comparison - Cumulative
S_ALR_87013143 - Target/Actual Comparison - Periodic
S_ALR_87013145 - Plan/Actual Comparison - Cumulative
S_ALR_87013146 - Plan/Actual Comparison - Periodic
S_ALR_87013148- Variance Catergories Cumulative
S_ALR_87013149- Variance Catergories Periodic
Regards,
Nitin Amritkar

Nitin,
I would suggest you to close this thread here post this to CO-Forum for better response.
Regards,
Prasobh

Similar Messages

L.C value not appearing in MB51 report

Dear gurus,
The l.c value not appearing in MB51 t.code,are there any other reports to see this values if so,plz explain in detail

Dear Jay,
It will be available in MB51, may be check your variant for hidden fields or your authorization, You will get in MR51 also
In Standard SAP System Asset GR will not have any Finance document at the time of Goods Receipt, So you are not getting Amount in LC, If you want to trigger finance document at the time of GR, you have to change the account assignment category A properties like i.e., remove the tick of GR Non valuated in the below path
SPRO-->Materials Management-->Purchasing-->Account Assignment-->Maintain Account Assignment Categories, Select A
Goods receipt made after this change will be triggered the finance document.
R,
amala

Lead time values are not appearing in the report for current year.

Hi friends,
Iam checking a report in production. where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
how can i get values in the report.
Thanks ,
VRV.

Hi,
Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
Eg: 5 Minutes + 5 Kilograms = 10
You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
Assign if helps...
Regards,
Suman

SCCM 2012 R2 - Software metering Reports Parameters Value not appear to choice

Hello Every Body
I hope to get answer as soon as possible
I have SCCM 2012 R2 & SQL Server 2012 SP1, my problem is ( all software metering Reports Parameters Values Not appear so I cannot select
Note:-
( All parameters Available Value set to Get Values From a Query)

Has it been over 45 days since you created the active SWM rules? Do all (most) other SWM reports
work?
all other reporting in SWM which doesn't ask for month and year working
only the problem in year & Month Parameters Values
note:-
these reports doesn't need a 45 days to work, alwasy when i install SCCM reports working only from the second day of installation

WHT amount not appearing in FBL1N report for Document type RE

Dear Friends,
While running FBL1N report for any vendor where TDS is applicable, the WHT amount is appearing for KR document type. But when it is RE document type the WHT amount is not appearing in the report. How can we resolve this? Any enhancement/any note to be applied?
Regards,
Ramkumar

Hi,
FBL1N is having the classic withholding tax field hence please don't refer the those fields.
please don't refer those fields.
Please review attached note 363309 for detailed explanation.
BSEG-QBSHB is designed to fill for the classic withholding tax. And
extended withholding tax information is stored exclusive in table
WITH_ITEM.
You can check in table BSEG for the fields and will find that system
do NOT update field BSEG-QBSHB.
In your line layout,you define a field BSEG-QBSHB. But actully the field
of vendor/customer line item is filled with zero from FI. Thus,it shows
zero in line item display.
And as note 363309 says,
"Remove the field which contains the withholding tax information
from your display variant.
If you want to display the withholding tax information, double-click on
the document number and subsequently choose 'Withholding tax'."
Regards
Madhu M
Edited by: M Madhu on Jan 18, 2012 9:13 AM

How do I uninstall CS2 on a PC when it does not appear in control panel add or remove programs, the hard drive was replaced and the program corrupted.

how do I uninstall CS2 on a PC when it does not appear in control panel add or remove programs, the hard drive was replaced and the program corrupted.

reinstall over your current installation and then uninstall, Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
or uninstall manually, Manually remove Adobe Creative Suite 2.x | Windows

On my computer, windows xp home, firefox icon does not appear in control panel, therefore i cannot remove it. i want to remove firefox how do i remove it?

I just want to remove firefox but cannot do so as the icon does not appear in control panel

It should be listed as "Mozilla Firefox"
*See --> https://support.mozilla.com/en-US/kb/uninstalling%20Firefox
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

7510 does not appear in control panel

HP Photosmart 7510, WIN 7, 64bit. No other changes. HP Pavilion dv4.
Installed with CD. Printer connected to netowrk just fine, everything indicates it installed correctly. Won't print from PC. Printer does not appear in control panel.
Tried reinstall, with same issue.

Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
What does it say?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Saved default Parameter values not appearing in Run Time version of report

I've created a report in Crystal 2008 and set up a number of parameters. I supplied each of them with a default value. I check it out in Crystal Reports and a nice looking window opens up that shows all my parameters with the default values. I save the report and open it within our application and upon pressing print, a plain looking box appears that lists my parameters but none of the saved values are included. Is this a problem with my version of Crystal Reports (ver. 12.2.0.290) that I can get an update for to fix; Or, is this a problem with the crviewer.dll that we are running in our application (ver 11.0.0.1282, dated March 8, 2005)?
I'm worried about updating to the latest Crystal 2008 crviewer.dll because I've read where it is only for reports with Saved Data and that won't work for us. We need the ability to refresh the data on the reports.

Hi Mike,
It likely is the viewer causing the problem. 2008 now has cascading parameters and the activex viewer does not support them.
All I can suggest is you try CR XI R2 which you can upgrade for free, you have to contact CIC to get a keycode to deploy your app, and test again.
R2 is out of support now so no fixes available...
http://downloads.businessobjects.com/akdlm/crystalreports/crxir2_sp4_full_bld_0-20008684.exe
http://downloads.businessobjects.com/akdlm/crystalreports/CRYSTALREPORTS06_0-20008684.EXE
Thanks
Don

Plan next yrs values not appearing in Report Painter

Hi,
In our one of Z report (developed thrugh SAP std Report Painter functionality), Plan next yrs column does not shows any value in output of report.
Basically this column should show next years plan values for WBS Element cost elementwise.
When I double click on any of the cell of this column, I am getting output with 0 records but selection criteria is appearing as Period 7 and Fiscal year as 2999 on output screen on the top. So I am thinking that output is not appearing because of wrong selection criteria field values/characteristics values.
Just wanted to know from you all guys, what things should I check in Report Painter to resolve this issue? Also what are the causes of this issue?
Could you please tell me the remedial procedure and transaction code to resolve this kind of issue?
Edited by: SWAPNIL PRAMOD KHARUL on Jan 30, 2011 12:17 PM
Edited by: SWAPNIL PRAMOD KHARUL on Jan 31, 2011 9:29 AM

Hi,
Thanks for reply.
Characteristics are:
Value Type: ZCJUL01
Value Type:10
Version:6-VERP
Period: 7
Valuation:0
Object ind.:1 to 5
Object ind.:P
Fiscal Year: Z-GJHNJ Next Year to 2999
I think it looks like wrong Period selection characteristics value.
Please suggest/guide what has to be done?
Edited by: SWAPNIL PRAMOD KHARUL on Feb 3, 2011 9:19 AM
Edited by: SWAPNIL PRAMOD KHARUL on Feb 3, 2011 9:21 AM

COPA Plan values not appearing in report

Hi
I posted COPA Plan values using KEPM and line items are appearing in KE25 but no values are not being appeared in COPA line item report we created using report painter. We used KE94 and KE91.
Actual values appearing correctly in report.
Any help??

Check if you have Plan/Act indicator maintained correctly with the plan value. If it shows up in other reports, I don't see any reason why it will not show up here. I would also check other parameters entered in the report and see if any other characteristic is preventing plan values from populating.
Shail

Commitment value for service PR not appearing in 12ksta report

We have two types of service PR-- COS & CCV. Although the PR is not deleted, its Deletion indicator in the COOI table in the COS PR is set automatically while same Deletion indicator is not set in the EBAN table. As a result ZERO Value is appearing in the WGHBTR, WTGBTR,WKGBTR,WOGBTR of the COOI table and zero value in the 12KSTA report. Why this difference of the Deletion indicator in the two tables for the same PR ?
With the similar configuration, there is no problem with the CCV PR .
How do I remove the Deletion indicator from the COOI table for the COS PR ?
Please help.
SM Hussain

Dear Saurav
We checked thru OKKP,CUNI,RKACOR04,RAKANBU01, CJEN. CJBN and including your suggested notes like 152571,47992, 671563, 167350 etc with no results.
We are wondering how Deletion indicator is set in COOI table when the PR is not actually deleted, if you can help us to throw some light on this aspect.
With regards
SM Hussain

Order plan cost not appearing in PS report.

Dear PS friends,
I have an issue in order plan cost updation ( budget report ).
Used the prescribed WBS in maintenance order ( additional data ), but its not appearing in planned cost of CJ31 screen.
Checked the following
a) WBS is account assignment element.
b) Network type order appended indicator in OPSV.
c) Setting in network type parameters for " determine plan
cost".
d) WBS and order - both are showing plan cost when booked separately, but not integrated.
Can anybody help me to resolve this !
Thanks in advance
-- Sri --
Edited by: Srinivasan Madaswamy on May 18, 2008 2:15 PM

Hi,
In case of the maintenance order (Order Category:30)
Please check the follwoing in Tcode OPSV:
1. type is maintained default i.e ++++ (this will consider all the order types mantioned for maintenance order.
2. Please selelct the appropriate controlling area.
3. Appended plan indicator has to be checked mark,
4. Assigned funds in the plan indicator has to be checked mark,
5. In Tcode IW32: In the additional data Tab assign the WBS Element. Save the maintenance order.
Hope its useful.
Reward point if useful. Revert abck if any other issue.
Thanks..

GL not appearing in PCA report S_ALR_87013336

Dear Experts,
For acct XXXX, there's balance & we can view line item thru FI (tcode: FBL4N). We can see PC been assigned to those line items, but the GL XXXX not reflecting in PCA report (tcode S_ALR_87013336).
GL XXXX is a Balance Sheet GL (not a Reconciliation GL). This GL is not added to 3KEH. There are other GLs too, which are not added to 3KEH, but still those are appearing in PCA report S_ALR)87013336.
If you can please advice about this discrepancy.
Regards,
Hussein.
Edited by: Hussein Merchant on Apr 18, 2011 5:05 PM

After adding 'trip type expenses in the layout' in the layout, save the layout as a variant and give it a name.
Next time when you run the report, put that variant and then run
Values will come

Value not appearing in the workbook

Hi Friends,
There are some values in the workbook which are prob appear through cell references. In dev sys its fine. We have moved the workbook to Quality, but here the values are not appearing. The value is period value which is not comming from either query columns or rows. I am unable to track down from where this value is appearing in the workbook. This period value appears where this (Layout ->display text elements ->General) appears ofcourse in Dev not Quality. There are many tabs(Queries) in the workbook.
How to know/check from where this value is getting populated.
Thanks & Regards,
Shreesh.

After adding 'trip type expenses in the layout' in the layout, save the layout as a variant and give it a name.
Next time when you run the report, put that variant and then run
Values will come

Values not appearing in Controlling reports

Similar Messages

Maybe you are looking for