Values not getting displayed from first page of the report.

Values in the report is getting displayed from second page.
First page in the report only displaying the report title and column names.
Secone page onwards, data and column names are generated.
Can any one please help me, with the cause of the problem.

what reporting tool?
Interactive Reporting
Financial Reporting

Similar Messages

OAF - Values not getting displayed in Search Page

Hi all,
I have developed a search page with the search citeria mapped to the search panel. I have created VO for this attribute and selected the value from View in this VO(Viewobject). I have created the Query region and set the property of Construction mode as autocustimazationcrietria.
Now my problem is when am running this page and search through any value or simply if i pressed the Go button,no value is being displayed in the page.
I have checked the value and same view and the query is returning value in Toad.
If someone can helpout this issue,it would be great help for me.
Thanks,
Renu.

Hi Renu ,
Since its working perfect for other query , it should also work for the query you have mentioned above .
Please make sure that you have shuttle the VO to the AM , and check the View Instance name and View attribute
for every field that are there in the query region is appropriate .
You can also run the below query with the search criteria parameter by passing it in where clause (run it from sql developer / toad ) , and check
whether you are able to get the result set in back end .
SELECT hca.attribute1 division, acac.customer_name,
hca.account_number customer_number, acac.collector_name collector,
NVL (acac.overall_credit_limit, 0) credit_limit,
NVL (acac.credit_available, 0) available_credit,
NVL (acac.balance, 0) open_balance,
acac.customer_status customer_status
FROM hz_cust_accounts hca, ar_customer_accounts_ce acac
WHERE 1 = 1
AND acac.customer_number = hca.account_number
AND acac.currency_code = 'USD'.
Keerthi

Master page Dynamic data not getting displayed in consecutive pages

Hi,
   I have buit a dynamic form which has some dynamic content in master page and a dynamic table in the body page.
Layout is
Master page
      Sub form
             Field1 -TextView
             Field2 - TextField      bind with Node1--->Attribute1
             Field2- TextField       bind with Node2---->Attribute2
            Field n - TextField
all the text fields are bound to various nodes from RFC
Body Page
         Sub form
              Table -Grows Dynamically
When i run the application all the fields are displayed perfectly in the first page.
when the table data goes more than one page the problem arises
The Text fields in the master page is not displaying the values in the second page ,but the text views and the table values are fine.
The values are getting displayed in both pages if i put any attribute inside the parent node.Is there any property i need to set at node level or subform level?
Thanks in advance,
Siva

Hi
I Would like to give a suggestion eventhough i don,t have answer to you question.
Master Page is used for static content as per SAP and Adobe like company logo and company address footer section and placing watermarks etc....
I feel because of the Dynamic behavior in master page it Leeds this problem.
Regards
Malli

HR iViews are not getting displayed and showing "Page can not be found".

Hello,
I am facing an issue in the EP 7 wherein all the standard HR iViews are not getting displayed and showing "Page can not be found".
We have added S_SERVICE autorisation object to user used for the relative JCO as well by looking at other similar forums but that did not help.
I have attached last part of log from file application.log under "F:\usr\sap\EP1\JC01\j2ee\cluster\server0\log"
#0002A537D2A6006A0000027300001C4C00046E3590936E5F#1247076244733#/Applications/WebApplications#sap.com/irj#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Administrator#12374##n/a##b7291b106be911de8d8a0002a537d2a6#SAPEngine_Application_Thread[impl:3]_27##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: init#
#1.5 #0002A537D2A6007A0000001200001C4C00046E35AAA74D33#1247076682222#/Applications/WebApplications##com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Guest#0##n/a##cf997d306af811dec69d0002a537d2a6#Thread[Finalizer,8,system]##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: destroy#
#1.5 #0002A537D2A6005F0000026C00001C4C00046E35C2814813#1247077082383#/Applications/WebApplications#sap.com/irj#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#SKhatkale#12460##n/a##a7cb51e06beb11de8bd70002a537d2a6#SAPEngine_Application_Thread[impl:3]_6##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: init#
#1.5 #0002A537D2A60075000002BD00001C4C00046E35C3AD4359#1247077102039#/Applications/Xss#sap.com/tcwddispwda#com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent#SKhatkale#12464##rrisep1p01_EP1_14481150#SKhatkale#b6d348006beb11deb9780002a537d2a6#SAPEngine_Application_Thread[impl:3]_31##0#0#Fatal#1#com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent#Plain###You do not have the authorization to start service sap.com/pcui_gp~xssutils/XssMenu.#
#1.5 #0002A537D2A6007A0000001300001C4C00046E35DDE07029#1247077541575#/Applications/WebApplications##com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Guest#0##n/a##cf997d306af811dec69d0002a537d2a6#Thread[Finalizer,8,system]##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: destroy#
#1.5 #0002A537D2A600650000024600001C4C00046E36B6DBE4D0#1247081181950#/Applications/WebApplications#sap.com/irj#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Administrator#12873##n/a##37e186606bf511de8bf20002a537d2a6#SAPEngine_Application_Thread[impl:3]_0##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: init#
Please let me know if anybody has come across such scenario before.
Thanks
Suhas
Edited by: Suhas Khatkale on Jul 8, 2009 10:09 PM

Hi,
This issue is now resolved. We followed up with SAP and they suggested to update the component EP-PSERV to latest patch which was earlier to patch 1. Later on we upgraded it to patch 4 and this resolved the issue.
Thanks
Suhas

Characterestics is not getting displayed from ODS in Multiprovider

I have Join ODS and remote cube in Multiprovider.And data is not getting displayed from ODS fields neither char not KF getting displyed in Multiprovider.I have checked the identification in Char that Char is presend in both the Cube and ODS,But that Char has data in ODS and not in Cube so I checked Char from ODS in Identification.I am still not getting data from ODS.
Can anyone help me in it?

How many requests do u have in the ODS?
If u have only 1 then just right click on DSO and say delete data it will be faster than deleting by request wise....
What is the message u r getting when u r trying to delete the request?
Khaja

Conditional formula to supress a section in the first page of the report

hi all,
how to programatically add a conditional formula to supress a section only on the first page of the report.
i am using CR XI R2 RAS server.
thanks in advance
Padmanaban V

Hi Padmanaban,
You can download samples from [here|https://www.sdn.sap.com/irj/boc/businessobjects-samples]
Regards,
Shweta

Values not getting displayed for members which doesnt have parents

Hi
I created a product dimension with 4 levels .For members which doesnt have parents,data is not getting displayed in JavaClient.
The values for members which doesnt have parents are getting displayed in the view created for the measures which are dimensioned by Product .I mapped the same view in the CWM2 work space ,but value is not getting displayed for members which doesnt have parents ,but values are getting displayed for members which have parents for measures.
Is it a bug , we were able to do it in Express ..
Can anybody help us in doing this.??
Thnx in Advance......

Hi,
This assumes that the members which do not have parents are mapped to the top level in the hierarchy. If they are at a level below the top level then they are not part of the hierarchy and therefore would not be displayed. So this sounds like expected behaviour.
Hope this helps
BI Beans PM Team
Oracle

Error msg not getting displayed on first time button click in SRM UI

Hi,
I have created a custom message in an impl. of SRM BADI BBP_DOC_CHECK_BADI in which one message is getting populated correctly in debugging. Again, when I check PO, the message is getting displayed correctly, however when I click on order button for the first time, it is not getting displayed but on subsequent occassion, it is working fine. Just wonder, why this is not happening for first time. Any input ??
Regards,
Ni3

Hi Virender,
I found a note 1239499 close to my requirement but not valid for SRM release 5.0. Is it the same, you wish to referred or is there any other?
Regards,
Ni3

How to get the text field in the header for only first page of the report

Hi,
I am developing reports in BI Publisher Enterprise where i am facing problem i.e., i have to get some text field in header,for only first page in the result but it is displaying in all the other pages of the report in result.So,please if you have any idea of how to solve it, please reply.It is required as early as possible.
Thanks in Advance

Invalid path? What are you doing? Writing the report output to an invalid directory?
Where are your terms and conditions? It would be very easy just to put them in a database table and select them in your report query.

Data not getting displayed in every page ...

Hi,
I'm facing a peculiar problem. I have a template where i want to display a certain table in every page but i can't place it in header. As far as i know it should get displayed if I select "Repeat as header row at the top of each page".
This table is under a group <?for-each@section:G_HEADERS?> ... The problem that i'm facing is the table is getting displayed in the first page but not on subsequent pages ... i even tried putting a simple table with a static text .. but its behaving simillarly .... I tried Table-> Heading rows repeat but to no avail ..
Please help me if someone has any solution ...

Do you have a single page or multiple pages?
You should be able to put a table in the header. Read up in the user guide on
<?start:body?>
<?end body?>
Which allows you define the header/foot inside the Word body.
In the 5.6.2 user guide it is on page 6-13:
Creating RTF Templates -> Defining Headers and Footer -> Multiple or Complex Headers and Footers.
In the word header you can use <??> command, but you have to spell them out and
not use form fields - becaue Microsoft Word does not allow form fields in headers.
Klaus

Web UI - Value not getting selected from drop down list .

Hi All ,
I am facing a problem in one of the fields which is enhanced with a drop down functionality .
I have created the GET_V_** method and also the GET_P_** method for the same .And finally I am able to see the values in the drop down list . But the problem is , when I am trying to select a value from the drop down no values are selected .
Can anyone plese help me in this as What has to be done .
I have taken references from few guides but I am not getting any clear idea of what has to be done .
Regards,
Ranjita

Hi Ranjita,
To trigger a round trip, you must have given the event name in GET_P method.
Same event handler would trigger.
Please put a break point in Event Handler in IMPL class, and in SET_attr method of the attribute in CN class and see if value is getting set properly or not. Final value that would be displayed on UI would be there in GET_attr method of CN class.
I hope it helps.
Thanks,
Rohit

Hierarchy value not getting displayed in WAD.

Dear all,
We have a Hier Variable for Business Area, it is there in the Filter area of the query.
when we execute the report in WAD through Portal , we are getting the Values restricted with Hier variable. But in the WAD report we have created filter Tab , which will display the values entered in the Variable screen wil display. But for this Business Area Hier Variable , we are not getting this displayed. when we use the Char variable for this we are getting the values in the WAD report Filters.
we need to display the hier value entered in the variable screen to be displayed in the filter tab of WAD Report
Regards,
srinivas
Edited by: srinivasaraju Penmetsa on Jun 25, 2009 1:06 PM

Dear,
Maintain JEX1 & JHX1 as 100% in ur condition Type.
Also maintain in SPRO , in Classifucation Condition type as
TAXINJ JHX1 AT1SETOFFT AT1 Set Off condition Total
TAXINJ JEX1 ECSSETOFFT ECS Set Off condition Total
Regards,
Pardeep Malik
Edited by: Pardeep Malik on Mar 4, 2009 1:05 PM
Edited by: Pardeep Malik on Mar 4, 2009 1:07 PM

List Of Values not getting displayed in BI launchpad

Hello All,
When i am running the report in BI launchpad, List of values are not displaying . throwing below error.
Detail Error:
com.businessobjects.sdk.core.server.CommunicationException$UnexpectedServerException: while trying to invoke the method com.businessobjects.mds.olap.protocol.bics.BICSClient.getCube() of a null object loaded from field com.sap.sl.proxyconsumption.services.olapaccessservice.BICSDiscoverServer.bicsClient of an object loaded from local variable 'this'
@The same report is working fine in WEBI Rich client.
I am using 4.1 SPO3 Patch 2
Please Help on this.
Thanks,
Ramesh

Hi,Supriya!
We are having problem looking like that (After report had been made if I click Refresh button and wait for Values for prompts - the same error message appears).
My user is in admin group and if log as Administrator - nothing changes.
Could you give me advice?

Adobe field values not getting displayed in UWL workitem

Hi,
We filled a ISR Adobe form and submitted it and generated the corresponding notification number.
On clickng the 'display and print form', the form is gettin displayed properly.
But on checking the form at the approvers UWL, the field values are not getting properly filled.
The form is getting properly displayed at R/3 through IQS22 and also the data values are properly attached to the notification number( checked through ISR_PROCESS_EVENT ).
Kindly help.
Thanks and Regards,
Anto.

Thanks for publishing your own solution!
Cheers,
Noë

ECess Value not getting displayed in MIGO

Dear All,
When I do a GR against a PO the Ecess Value doesnt flow in MIGO. ( PO created with Non-deductible excise tax code.)
Please note the below details also.
We are using SAP 4.7 version & our tax procedure is TAXINJ.
So can anyone explain how the excise values are determined & displayed in MIGO in case of Non-Deductible excise?
Note: My BED & S&H cess values are displayed in GR but not ECess.
Awaiting your valuable replys.
Regards,

Dear,
Maintain JEX1 & JHX1 as 100% in ur condition Type.
Also maintain in SPRO , in Classifucation Condition type as
TAXINJ JHX1 AT1SETOFFT AT1 Set Off condition Total
TAXINJ JEX1 ECSSETOFFT ECS Set Off condition Total
Regards,
Pardeep Malik
Edited by: Pardeep Malik on Mar 4, 2009 1:05 PM
Edited by: Pardeep Malik on Mar 4, 2009 1:07 PM

Values not getting displayed from first page of the report.

Similar Messages

Maybe you are looking for