Values not getting populated in the o/p

Hi,
I have a requirement,where in which I have to add MRP Controller(marc-dispo) and production scheduler(marc-fevor) fields in the selection screen and the same should be added in the o/p.These fields are not getting populated in the o/p,even if I give some values for these fields in the selection-screen.What would be the reason for this?
Regards,
Hema

Dear Hema,
Could you please tell me how many internal tables you are using to store the data for display.
I observerd that you have lt_stock and lt_mat2 declared in the part of the program
>DATA: lv_stock TYPE lty_stock.
>DATA: ltmat2 TYPE TABLE OF lty_mat.
you have displayed above, however you are also using ls_stock and lv_stock .
>IF p_ztotal = ' '. "line
>WRITE 18 ls_stock-matnr.
>WRITE 38 lv_stock-strgr.
>
>ELSEIF ztotal = 'S'.                             "subtotal
    >WRITE: 15 ls_stock-nrmit.
    >WRITE 32 lv_stock-dispo.                    
    >WRITE 43 lv_stock-fevor.                      
  >ELSE.                                            "total
    >WRITE: 15 'TOTAL'(016), ls_stock-prgrp.
>
  >ENDIF.
Are those for displaying some other information?
Also the problem of display you are facing can also be because there are no records to be displayed which satisfies the selection criteria.
Best Regards,
Rajesh.
Please reward points if found helpful.

Similar Messages

  • Values not getting populated in the SMOPCCAPRO

    Hi,
    We had added a new field to CPGProduct in component CPGOE_ABLOCKS. But the extension field was not included to the BOL structure automatically.
    So ,we had used the SAP note 1472567 to add the include structure INCL_EEW_MKTPL_PRD to structure CRMS_MKTPL_CPG_PROD which inturn would rectify our BOL  structure CRMS_MKTPL_IB_CPG_PROD.
    The field which we had added using AET was added in tables CRMD_MKTPL_PROD and SMOPCCAPRO. But we are facing an issue that the values are not getting populated in the SMOPCCAPRO table on save.The values are gettign populated in the CRM table.
    Do we need to implement any other SAP note on the midleware side too to rectify this issue as i infer some interface structure would be missing this field which results in the truncation of value from being passed to the CDB table . Any pointers in this regard would be helpful.
    Thanks
    Swapna.

    Hi Swapna,
    as the CDB table has been extended with the new field I assume that you have enabled the mobile flag for the enhancement.
    Then it will also extend the mobile BDOC and the data should be transfered automatically.
    If this does not happen there's an error somewhere. Either the middleware is not set up properly or the mapping routine does not transfer the fields properly.
    I recommend to raise an OSS message for this.
    Best regards
    Matthias

  • Cube values not getting populated in the report

    Hi,
    I have done the selective deletion of Purchase orders and done the repair load, the set of records are there in the cube but unable to see in the  report.. the records in the cube satisfies the selection criteria also.
    expecting the early response,
    Points will be rewarded for the any information and solution also if any body face the same problem pls share the information.
    regards,
    vishali.

    Hi,
    i have already activated the cube and that repair full request is available for reporting that icon has come in the cube and if it is reg. aggregates there are not aggregates present so .... what might be the problem pls let me know....
    regards,
    vishali.

  • OVS value not getting populated in field

    Hi Experts,
    Kindly suggest me a solution for the below given issue.
    I have added three custom fileds to an already existing WD Coponent.
    And also added OVS help as an input help method to these fields.
    If I right click on the WD application and TEST, the application opens in browser and I am able to select the value from OVS list.
    If I run the application by copying the URL and paste it in the browser, or clicking on Portal link, if we select the value from OVS list that value is not getting populated in the field.
    Below is the logic I have written.
    method ON_OVS_PAYMENT .
    TYPES:   BEGIN OF ty_payment,
                 payment TYPE char4,
                 desc    TYPE char30,
               END OF ty_payment.
    * declare data structures for the fields to be displayed and
    * for the table columns of the selection list, if necessary
      types:
        begin of lty_stru_input,
    *   add fields for the display of your search input here
          payment type char4,
    *      desc    type string,
        end of lty_stru_input.
      types:
        begin of lty_stru_list,
    *   add fields for the selection list here
          payment type char4,
          desc    type char30,
        end of lty_stru_list.
      data: ls_search_input  type lty_stru_input,
            lt_select_list   type standard table of lty_stru_list,
            ls_text          type wdr_name_value,
            lt_label_texts   type wdr_name_value_list,
            lt_column_texts  type wdr_name_value_list,
            lv_window_title  type string,
            lv_group_header  type string,
            lv_payment       type string,
            lt_payment       TYPE TABLE OF ty_payment,
            ls_payment       TYPE ty_payment,
            lv_short         TYPE string,
            lv_table_header  type string.
      field-symbols: <ls_query_params> type lty_stru_input,
                     <ls_selection>    type lty_stru_list.
      case ovs_callback_object->phase_indicator.
        when if_wd_ovs=>co_phase_0.  "configuration phase, may be omitted
    *   in this phase you have the possibility to define the texts,
    *   if you do not want to use the defaults (DDIC-texts)
          ls_text-name = `PAYMENT`.  "must match a field name of search
          ls_text-value = `Terms of payment`. "wd_assist->get_text( `001` ).
          insert ls_text into table lt_label_texts.
          ls_text-name = `PAYMENT`.  "must match a field in list structure
          ls_text-value = `Terms of Payment`. "wd_assist->get_text( `002` ).
          insert ls_text into table lt_column_texts.
          ls_text-name = `DESC`.  "must match a field in list structure
          ls_text-value = `Description`. "wd_assist->get_text( `002` ).
          insert ls_text into table lt_column_texts.
          ovs_callback_object->set_configuration(
                    label_texts  = lt_label_texts
                    column_texts = lt_column_texts
                    group_header = lv_group_header
                    window_title = lv_window_title
                    table_header = lv_table_header
                    col_count    = 2
                    row_count    = 20 ).
        when if_wd_ovs=>co_phase_1.
          ovs_callback_object->context_element->get_static_attributes(
              importing static_attributes = ls_search_input ).
    *     pass the values to the OVS component
          ovs_callback_object->set_input_structure(
              input = ls_search_input ).
        when if_wd_ovs=>co_phase_2.
          if ovs_callback_object->query_parameters is not bound.
    ******** TODO exception handling
          endif.
          assign ovs_callback_object->query_parameters->*
                                  to <ls_query_params>.
          if not <ls_query_params> is assigned.
    ******** TODO exception handling
          endif.
    *     call business logic for a table of possible values
    *     lt_select_list = ???
          lv_short = <ls_query_params>-payment.
          CALL FUNCTION 'ZSIILESD001' DESTINATION 'LOGICALE22'
          EXPORTING
          i_payment             = lv_short
          TABLES
          ET_PAYMENT            = lt_payment.
        lt_select_list[] = lt_payment[].
          ovs_callback_object->set_output_table( output = lt_select_list ).
        when if_wd_ovs=>co_phase_3.
    *   apply result
          if ovs_callback_object->selection is not bound.
    ******** TODO exception handling
          endif.
          assign ovs_callback_object->selection->* to <ls_selection>.
          if <ls_selection> is assigned.
            ovs_callback_object->context_element->set_attribute(
                                   name  = `PAYMENT`
                                   value = <ls_selection>-payment ).
          endif.
      endcase.
    endmethod.

    Hi Pradeep,
    I don't think it really make any difference to the application run if we run from SE80 or run via application url.
    Try to set the external break point in OVS PHASE3 for your user. Check if the break point is reached and data is set after selection from OVS.
    Regards,
    Rama

  • UWL : New tasks are not getting populated in the UWL

    Hi Experts,
        I<b> configured my uwl to my backend system , the completed tasks are getting populated in the UWL but the New tasks and in progress tasks are not getting populated in the UWL.(some thing strange).</b>
    When  i am trying to configure the universal  worklist system ,its givin me a caution message as  <b>System SHDCLNT012 does not support optimized delta pull</b> . where SHDCLNT012 is the system alias name.
    Is this the problem for not populating the new tasks in the UWL?
    Please provide me  the solution..
    Thanks & Regards,
    Sateesh

    Hi Sateesh,
    This message will appear if either the background jobs are not scheduled, or UWL cannot tell that the background jobs are scheduled. The message no longer appears once you ensure the background jobs are scheduled to run via the user id UWL_SERVICE and that user is mapped to my portal user ID UWL_SERVICE.
    Kai

  • Consumption values not getting updated on the material mastere

    HI Gurus,
    can anbody please explain me the reason why the consumption values not getting updated on the material master. What kind of movements qualify to get updated on the material master? is it 261, 101, 701 and 702 etc only? or any movement that means issues, receipts etc? I just happened to see a few materials which had some movements occur in the past but they did not get updated on the material master. These materials used to have ND MRP type until recently and these were changed to VM few days agao. could this be a reason? Please throw some ligjht on this. Helpful replies will be appreciated
    Thanks
    Anushga

    Dear ,
    Use tcode - OMJJ and then do the following setting -
    for movement - 261,262, 201 and 202
    Statistically relev. - 2
    Consumption posting - R
    for movement - 701 and 702
    Statistically relev. - 2
    Abhinay
    Edited by: Abhinay Sachan on Sep 10, 2010 1:38 PM

  • Search Help for Vendor Feild not getting populated in the Screen Element

    Hi Everyone,
    In transaction Miro, I get a POP-UP for Invoicing Party i.e. Vendor and Users required a custom search help.
    The Search help for Vendor(LIFNR) is KRED_C and i appended a Z search help under this.
    Now that the search help exists and I can drill down the values too but when i select/choose any value,  that value is not getting populated in Screen feild.
    is there any validation I need to do for this.
    Please suggest me... I checked SDN there are many things but i couldn't figure out wat i need to do and where I need to modify.
    Regards,
    Raj

    Dear Hema,
    Could you please tell me how many internal tables you are using to store the data for display.
    I observerd that you have lt_stock and lt_mat2 declared in the part of the program
    >DATA: lv_stock TYPE lty_stock.
    >DATA: ltmat2 TYPE TABLE OF lty_mat.
    you have displayed above, however you are also using ls_stock and lv_stock .
    >IF p_ztotal = ' '. "line
    >WRITE 18 ls_stock-matnr.
    >WRITE 38 lv_stock-strgr.
    >
    >ELSEIF ztotal = 'S'.                             "subtotal
        >WRITE: 15 ls_stock-nrmit.
        >WRITE 32 lv_stock-dispo.                    
        >WRITE 43 lv_stock-fevor.                      
      >ELSE.                                            "total
        >WRITE: 15 'TOTAL'(016), ls_stock-prgrp.
    >
      >ENDIF.
    Are those for displaying some other information?
    Also the problem of display you are facing can also be because there are no records to be displayed which satisfies the selection criteria.
    Best Regards,
    Rajesh.
    Please reward points if found helpful.

  • Drop down values doesnt get populated in the standard PCRs

    Dear SDN Community,
      I am using Internal Transfer, Promotion and Transfer PCRs. In all the standard PCRs the dropdowns values are not getting populated. Can you please advice me here.
    Thanks!
    Surya.

    The portal patch upgrade has resolved this issue.

  • Users details not getting populated in the portal tables..

    Hi,
    We have implemented single sign on (SSO) and we do not create users in the portal as user/pwd come from OID.
    Now becoz of this the portal tables are not getting populated.I require that all the users of the OID to be populated in the portal tables. How can I do it.I depserately require it.

    You can use the function wwsec_api.activate_portal_user to create the shadow records in the portal repository.
    Ref. : http://www.oracle.com/technology/products/ias/portal/html/plsqldoc/pldoc1014/wwsec_api.html

  • Lookup value not getting populated...

    I am using following xml code (copy.asmx > method CopyIntoItems). Per Microsoft
    http://msdn.microsoft.com/en-us/library/websvccopy.copy.copyintoitems(v=office.14).aspx I should be able to update lookup fields value as well because Lookup list is on the same subsite and both source and target libraries are on the same sub-site as well.
    Any idea? Item gets copies and all the columns get populated except the lookup column. I verified that the ID and value matches for the lookup value.
    <?xml version="1.0" encoding="utf-8"?>
    <soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:soap="htthttschemas.xmlsoap.org/soap/envelope/" xmlns:m="schemas.microsoft.com/sharepoint/soap/">
    <soap:Header>
    </soap:Header>
    <soap:Body>
    <m:CopyIntoItems>
    <m:SourceUrl>http://internal.col.com/sales/bymonth/Active/0973410.pdf</m:SourceUrl>
    <m:DestinationUrls>
    <m:string>http://internal.col.com/sales/bymonth/NonActive/0973410.pdf</m:string>
    </m:DestinationUrls>
    <m:Fields>
    <m:FieldInformation Type="Text" DisplayName="Sales Code" InternalName="SalesID" Value="99999"></m:FieldInformation>
    <m:FieldInformation Type="Text" DisplayName="Sales Person Name" InternalName="FullName" Value="TEST, John S."></m:FieldInformation>
    <m:FieldInformation Type="Choice" DisplayName="FileSection" InternalName="PersonnelFileSection" Value="1- New Hire Paperwork, ECA, Termination, LOA"></m:FieldInformation>
    <m:FieldInformation Type="Choice" DisplayName="FileCategory" InternalName="PersonnelFileCategory" Value="Termination Paperwork"></m:FieldInformation>
    <m:FieldInformation Type="Text" DisplayName="Year" InternalName="Record_x0020_Year" Value="2014"></m:FieldInformation>
    <m:FieldInformation Type="DateTime" DisplayName="Effective Date" InternalName="Anniversary" Value="04/22/2014 00:00:00"> </m:FieldInformation>
    <m:FieldInformation Type="Choice" DisplayName="Status" InternalName="Current_x0020_Status" Value="Terminated"></m:FieldInformation>
    <m:FieldInformation Type="Lookup" DisplayName="AreaCode" InternalName="AreaCode" Id="cdae6ca0-d49c-4971-a580-2adcd7a282f1" Value="4;#1795004"></m:FieldInformation>
    <m:FieldInformation Type="Text" DisplayName="Title" InternalName="Title" Value="TEST"></m:FieldInformation>
    </m:Fields>
    <m:Stream>base64Binary</m:Stream>
    </m:CopyIntoItems>
    </soap:Body>
    </soap:Envelope>

    How many values are pulled in the lookup column?
    Also thourgh UI are you able to see values for the lookup column.
    Please ensure that you mark a question as Answered once you receive a satisfactory response.

  • Custom field not getting populated in the "Show Results where" drop down

    Hi all,
    In appointment detail page by clicking on Add button on the user related information section , it takes us to a search layout showing the list of available users.
    Here we have to filter the user's based on a custom field which has already been created in the user object. But I am not able to add the custom field in the "Show results where" drop down for which the search has to be done.
    It is getting reflected in the normal search layouts.So Can any one tell me why the change is not getting reflected in the user related info search layout?

    I tested your use case and you are correct. I would recommend that you submit a service request to CRM On Demand customer care in reference to this issue.

  • Values not getting populated in sapscript

    Hi,
    i have written a subroutine pool with ENTRY form . which is configured in NACE. when i run the T-code VT03N. in debugging mode in the subroutine i am getting the values . But the values are not gettng populated in sap script. open_form , write_form close_form and text elements are all used.
         the same code is copied and put in a report without ENTRY form and run directly then we are getting the values in script.
    please let me know for any answers.
    Thanks
    Chetan
    <MOVED BY MODERATOR TO THE CORRECT FORUM>
    Edited by: Alvaro Tejada Galindo on May 14, 2009 1:06 PM

    H,
        Do as below.
    CALL FUNCTION 'OPEN_FORM'
    EXPORTING
       form                              = 'ZTEST_SCRIPT'
      LANGUAGE                          = SY-LANGU
    EXCEPTIONS
       canceled                          = 1
       device                            = 2
       form                              = 3
       OPTIONS                           = 4
       unclosed                          = 5
       mail_options                      = 6
       archive_error                     = 7
       invalid_fax_number                = 8
       more_params_needed_in_batch       = 9
       spool_error                       = 10
       codepage                          = 11
       OTHERS                            = 12
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Loop at itab .
    call function 'WRITE_FORM'
    exporting
    element = 'LABEL'
    FUNCTION = 'SET'
    TYPE = 'BODY'
    window = 'MAIN'.
    ENDLOOP.
    Call Function 'CLOSE_FORM'.
    In SE71 'ZTEST_SCRIPT' in main window
    add a field like &ITAB-MATNR&.
    ex:-
    /E   LABELS
    P1   &ITAB-MATNR&.
    Regards
    Krishna
    Edited by: Bala Krishna on Aug 11, 2008 12:28 PM
    Edited by: Bala Krishna on Aug 11, 2008 12:29 PM

  • Drop down vales not getting populated all the records

    Hi,
    I have the scenario. Drop down has the values. But it is getting populated for only one record. Second record drop down is there, but values are not there.It is blank from second record.
    Thanks
    GJ

    Hi ,
    Sorry for the confusion.
    I am working on xml schema offline scenario. I have 10 line items. It has one drop down list. I have populated the value in drop down. But in the first item drop down list, the first value is appearing as deafult one. From the second line item onwards, it is not appearing as default value. When you dropped down on the list, I can see all the values. I want all the drop down list, the first value should be appear as default value.
    Thanks
    GJ

  • Work area field value not getting populated in table control grid.

    Hi all,
    I am currently facing an issue where I have declared a variable and have fetched the workarea field name in it. To be exact, the variable contains the workarea name whose value I am finally populating to the table control. Now although the workarea name when manually copied and pasted in field name in debugging mode exhibits the value of the it, Im unable to fetch the same value in the variable as I have only the work area name in it. I need the value of the workarea-field to be in the variable.Please provide your valuable suggestions for this issue...
    Regards,
    Edited by: Vishwanath Sreedharen on Jan 2, 2012 3:25 PM

    Hi Nabheet,
    Please consider the below example...
    DATA: l_var(30) TYPE C.
    CONCATENATE 'wa' '-' I_FIELD2-NAME INTO l_var.
    The i_field2-name contains the name of a custom table field CP_CUSTOM_GRP. So now the l_var contains wa_cp_custom_grp.
    Now consider the wa_cp_custom_grp has a value 'BA'.
    Now my issue is the l_var contains wa_cp_custom_grp but not its value(too obvious)... Would like to know whether is there a way through which the value of this wa_cp_custom_grp  'BA' could be populated to the variable l_var...

  • Message Attribute value not getting populated

    Hi,
    We are using the WF_NOTIFICATION.send() API to send a notification. We have some attributes in the subject and body. We are setting the values to these attributes using WF_NOTIFICATION.SetAttrText() API. Notification is sent successfully, but the values for the attributes in the subject line is not getting set (returns blank), but if we use the same attribute in the message body, the values are properly set (returns the value). The values are properly getting updated in the table wf_notification_attributes.
    e.g. We have an attribute NAME, in the subject and body we use &NAME, the subject returns null, where as body returns attribute value.
    Please let us know what is the issue?
    Is there any way of sending notification (using some other standard API), but subject attribute should get updated with actual value?
    Thanks in advance.

    Hi,
    See OWF forum message:Re: wfnotificationapi.getsubject() 's return value
    There is a bug related in Metalink: Doc ID = 229566.1
    fact: Oracle Workflow Cartridge
    symptom: Regional settings other than English
    symptom: Statement WFNotificationAPI.getSubject(context, new BigDecimal(125)
    ) always returns null.
    symptom: The method WFNotificationAPI.getSubject returns the subject of the
    message if the regional setting is English (United States)
    cause: Bug 2379277 Oracle Workflow Java Notification API Multilingual
    Problem
    The language is not recognized by WF as an installed language.
    fix:
    1. Follow the instructions for installing an additional language in The Oracle
    Workflow Server Installation Notes
    2. Rerun the test by creating a new message.
    IMPORTANT! The old message will not have a row in the table until they load one
    for that language.
    Reference:
    The Oracle Workflow Server Installation Notes

Maybe you are looking for

  • Tax code BW does not appear in any G/L account item

    Hi Gurus, I have a requirement with Brazil client, they have got two types of taxes (PIS and COFINS) For which I created 2 tax codes BW & BX (with 100% & 100%). I created two tax conditoins ZPIS & ZCOF with access sequence MWST. I assigned tax codes

  • "Allow users to automatically login" setting does not function.

    We have configured Latitude 2.3 running on a Linux Apache Server, and I am trying to figure out how to automatically log users into the system so they don't need to enter their windows credentials everytime they go to the page. I have configured the

  • How do you change the name of macbook pro

    How do you change the name of the MacBook Pro (not with Retina Display) ????                                                                       David

  • Passing the Final Cut certification test?

    I want to take the level one certification test for Final Cut by early February, is my goal. I know how to use it, and can do simple editing with Final Cut as well as Premiere and Avid softwares, so I'm not a total novice. But I'm wondering how to be

  • Problem with a View Object

    Hi, I am using ADF BC technology. I've got a curious for me problem... I get from a creation form a code that the user enter, a method in the app. module checks using the view object if the code exists or not... The code always Exist! Debugging I fou