"Values only from infoprovider" setting not working

Hey Guys,
I am on 2004s backend and 3.5 frontend. I need to restrict values of a characteristic on F4 and report only to infoprovider values. I know there is a straight setting in Info-object maintenance screen where you can specify in Bex tab, Only values from Infoprovider.
But unfortunately its not working for me. Even after doing this setting, I continue to get values from master data table on F4 screen.
What could be missing?
Please note that my info-object on which I am applying this setting also has a compounding characterstic, which makes 2 values as key to appear on selection screen.
Any suggestions/advice would be of great help.
Thanks
Abhijit

BTW, the firmware was run and the keyboard AND audio did work prior to and after the firmware update. It just suddenly stopped.

Similar Messages

When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

If you see a red light in the audio output port, then the internal switch is stuck. Insert the earphone plug a few times and see if you can trip the switch. If that fails, insert a cocktail stirrer and the like and jiggle it around inside. If that fails, take it to an Apple store and have the technicians at the genius bar do it for you.
Ciao.

Purchase Order Goods Receipt quantity tolerance setting not working.

Team,
We are using the IS-Oil solution, ECC 6.0 REL 605 SP LEVEL 009 .
The issue that I have is as follows:
Purchase Order Goods Receipt quantity tolerance setting not working, I had set up a 10% tolerance on QTY received in the GR process via the PIR and also the Purchase Value Key in the material master and also changed the message to a warning in OMCQ for message number M0722.
I had performed a similar configuration and master data maintenance on a different NON IS-OIL client install and it worked fine.
I believe it is the IS-OIL component in the Inventory update portion of the GR process that is causing the error.
I have searched for OSS notes, however they mention that there is no solution.
Setting the PO line item as Unlimited will not be best practice for the business and will not be used.
Has anyone come across this issue? and how was it resolved, your help and guidance will be greatly appreciated.
Thanks

Hello,
Please check the Tolerance levels in O588
Also you can use the BAdI OIB_QCI_ROUND_QTY: A new method, CHECK_TOLERANCE
Best Regards,
R.Brahmankar

Is there a way to only catalog backup set not in the catalog? "CATALOG START WITH" generates double entry.

The DB version is 11.1.0.7.
The "CATALOG START WITH" not only catalog backup set that are not in the RMAN catalog, but also catalog a second copy for files that are already in the catalog.
Files are not a second copy; they are the same file in the same directory.
Having two copies in the catalog, through an error when deleting explicitly the backups.
We have to add the force clause to avoid the error.
RMAN> delete FORCE backup tag 'offsite-1';
The force clause ignores any I/O error.
The delete is part of our scheduled offsite backup script, which returns a false positive error when the force clause is ommited.
I don't want the force clause, in order to be notify if the backup set that are expected to be on disk are no more there, e.g., if someone had deleted files manually at the OS level bypassing rman.
Is there a way to only catalog backup set not in the catalog?
or May be remove the copy #2 entry from the catalog?
Find bellow a test case example:
RMAN> list backup summary TAG 'OFFSITE-1';
List of Backups
===============
Key     TY LV S Device Type Completion Time    #Pieces #Copies Compressed Tag
12      B F A DISK        11-JUN-13 09:41:45 1       1       NO         OFFSITE-1
13      B F A DISK        11-JUN-13 09:43:31 1       1       NO         OFFSITE-1
14      B A A DISK        11-JUN-13 09:43:33 1       1       NO         OFFSITE-1
15      B F A DISK        11-JUN-13 09:43:34 1       1       NO         OFFSITE-1
RMAN> CATALOG START WITH 'C:\backups\offsite_disk\IBISdatabase\scheduled_offsite';
searching for all files that match the pattern C:\backups\offsite_disk\IBISdatabase\scheduled_offsite
cataloging done
List of Cataloged Files
=======================
File Name: C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\scheduled_offsite\06OBTJEP_1_1
File Name: C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\scheduled_offsite\07OBTJI3_1_1
File Name: C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\scheduled_offsite\08OBTJI5_1_1
File Name: C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\scheduled_offsite\09OBTJI6_1_1
RMAN> list backup summary TAG 'OFFSITE-1';
List of Backups
===============
Key     TY LV S Device Type Completion Time    #Pieces #Copies Compressed Tag
12      B F A DISK        11-JUN-13 09:41:45 1       2       NO         OFFSITE-1
13      B F A DISK        11-JUN-13 09:43:31 1       2       NO         OFFSITE-1
14      B A A DISK        11-JUN-13 09:43:33 1       2       NO         OFFSITE-1
15      B F A DISK        11-JUN-13 09:43:34 1       2       NO         OFFSITE-1
RMAN> DELETE BACKUP TAG 'OFFSITE-1';
List of Backup Pieces
BP Key BS Key Pc# Cp# Status      Device Type Piece Name
24      18      1   1   AVAILABLE   DISK        C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\06OBTJEP_1_1   <<--- same file
30      18      1   2   AVAILABLE   DISK        C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\06OBTJEP_1_1   <<--- same file
25      19      1   1   AVAILABLE   DISK        C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\07OBTJI3_1_1
31      19      1   2   AVAILABLE   DISK        C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\07OBTJI3_1_1
26      20      1   1   AVAILABLE   DISK        C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\08OBTJI5_1_1
32      20      1   2   AVAILABLE   DISK        C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\08OBTJI5_1_1
27      21      1   1   AVAILABLE   DISK        C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\09OBTJI6_1_1
33      21      1   2   AVAILABLE   DISK        C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\09OBTJI6_1_1
deleted backup piece
backup piece handle=C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\06OBTJEP_1_1 RECID=24 STAMP=821470356
deleted backup piece
backup piece handle=C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\07OBTJI3_1_1 RECID=25 STAMP=821470356
deleted backup piece
backup piece handle=C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\08OBTJI5_1_1 RECID=26 STAMP=821470356
deleted backup piece
backup piece handle=C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\09OBTJI6_1_1 RECID=27 STAMP=821470357
Deleted 6 objects
RMAN-06207: WARNING: 4 objects could not be deleted for DISK channel(s) due
RMAN-06208:          to mismatched status. Use CROSSCHECK command to fix status
RMAN-06210: List of Mismatched objects
RMAN-06211: ==========================
RMAN-06212:   Object Type   Filename/Handle
RMAN-06213: --------------- ---------------------------------------------------
RMAN-06214: Backup Piece    C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\06OBTJEP_1_1
RMAN-06214: Backup Piece    C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\07OBTJI3_1_1
RMAN-06214: Backup Piece    C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\08OBTJI5_1_1
RMAN-06214: Backup Piece    C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\09OBTJI6_1_1

Hi JM,
Your demo with Oracle 10.2.0.5
At line 36 you answered "No" to "Do you really want to catalog the above files (enter YES or NO)?".
Just repeate your demo and answer Yes.
Even if he might have replied with "YES" then also, the RMAN search for the files which it can recognize as a valid rman backup file. Else it would show the list of files which are not recognized by RMAN as a valid file.
RMAN> catalog start with '/home/oracle/scripts';
using target database control file instead of recovery catalog
searching for all files that match the pattern /home/oracle/scripts
List of Files Unknown to the Database
=====================================
File Name: /home/oracle/scripts/RMAN_BACKUP.sh
File Name: /home/oracle/scripts/rman_clone.log
File Name: /home/oracle/scripts/Db_Refresh.sh
File Name: /home/oracle/scripts/rman_erp.scr
File Name: /home/oracle/scripts/RMAN_14FEB.log
File Name: /home/oracle/scripts/nid.sh
File Name: /home/oracle/scripts/Full_Clone.sh
File Name: /home/oracle/scripts/rman_staging.scr
Do you really want to catalog the above files (enter YES or NO)? yes
cataloging files...
no files cataloged
List of Files Which Where Not Cataloged
=======================================
File Name: /home/oracle/scripts/RMAN_BACKUP.sh
RMAN-07517: Reason: The file header is corrupted
File Name: /home/oracle/scripts/rman_clone.log
RMAN-07517: Reason: The file header is corrupted
File Name: /home/oracle/scripts/Db_Refresh.sh
RMAN-07517: Reason: The file header is corrupted
File Name: /home/oracle/scripts/rman_erp.scr
RMAN-07517: Reason: The file header is corrupted
File Name: /home/oracle/scripts/RMAN_14FEB.log
RMAN-07517: Reason: The file header is corrupted
File Name: /home/oracle/scripts/nid.sh
RMAN-07517: Reason: The file header is corrupted
File Name: /home/oracle/scripts/Full_Clone.sh
RMAN-07517: Reason: The file header is corrupted
File Name: /home/oracle/scripts/rman_staging.scr
RMAN-07517: Reason: The file header is corrupted
About the RMAN catalog, it will not catalog the same file twice. It will only catalog the files which are not known to the database.
See this demo. (/backup/RMAN/STAGING/ is the location where all the backup pieces are.)
RMAN> catalog start with '/backup/RMAN/STAGING/';
searching for all files that match the pattern /backup/RMAN/STAGING/
no files found to be unknown to the database
This was the location based test, Another demo showing piece by piece catalogging .
RMAN> list backuppiece '/backup/RMAN/STAGING/ERP_CNTRL_c-13949842-20130724-00';
List of Backup Pieces
BP Key BS Key Pc# Cp# Status      Device Type Piece Name
1323    1321    1   1   AVAILABLE   DISK        /backup/RMAN/STAGING/ERP_CNTRL_c-13949842-20130724-00
RMAN> catalog backuppiece '/backup/RMAN/STAGING/ERP_CNTRL_c-13949842-20130724-00';
cataloged backup piece
backup piece handle=/backup/RMAN/STAGING/ERP_CNTRL_c-13949842-20130724-00 RECID=1324 STAMP=821717283
RMAN> list backuppiece '/backup/RMAN/STAGING/ERP_CNTRL_c-13949842-20130724-00';
List of Backup Pieces
BP Key BS Key Pc# Cp# Status      Device Type Piece Name
1324    1321    1   1   AVAILABLE   DISK        /backup/RMAN/STAGING/ERP_CNTRL_c-13949842-20130724-00
Hope its understandable, if any query please revert.
Happy to Help.
Thanks and Regards,
Prashant

Command Sets not working on ACS 5.1

I'm running ACS 5-1-0-44-3.
I have everything running properly on ACS 5.1. I'd like to implement command sets for selected users and groups. Under Access Policies -> Device Admin-> Authorization I have Command Sets selected. The cisco provided is DenyAllCommands. I have this command set running on all groups and every groups is still able to issue any command they wish. I've also created a "show_only" command set that I've issued one group and they are still able to do conf t or any other command.
Am I missing something?
Do you need to reference the command set name under the shell profiles?
Its my understanding that all you have to do is reference it in "Authorization" in the rules under Device Admin.
I can understand a custom command set not working because of user error but DenyAllCommands should work.
Anyone have any ideas?
I have already re-patched the ACS
Stopped and started services.
And it seems like Command Sets is the only not referenced in the logs

I do it a lot
could you paste screnshot of your command set?
I've recently met another issue,
with my command set definition as below (as you can see its very simple):
almost every show is blocked (as suspected) but not "show run" (which is strange for me)

Consuming PI Webservice from Webdynpro Java Not working

Hello SAP,
Environment: CE 7.2.
Resolution expected immediately, Helpful answer is highly appreciated.
Is the namespace should not exceed 60char for PI Webservice, for executing the webservice from Webdynpro Java.
I tried with all the options in executing the PI Service from Webdynpro Java, None of the options worked. I am facing the below error while I was calling the PI Webservice.
I don't see any problem from Webdynpro Java, what ever the procedure I have followed is the standard procedure.
Fortunately when I execute the service from Webservice Navigator, it is working as expected. The same webservice when I consume it from Webdynpro Java it is not working
Options tried so far:
1) Published the Services to Service Registry and there by consuming the PI Service from Service Registry - Not worked
2) Tweaked the URL with few options - Not worked (Tweaking the URL, ex: portType, Binding)
3) Changing the Business Systems in PI and there after calling the service - Not worked
4) Initializing the code, instead of creating Service Controller and calling the PI Service - Not worked.
5) Created a Provider System and tried to call the PI Webservice from Provider System - Not Worked
For all the Options, I am facing the same error which is provided in the screenshot.
Below procedure which I have followed for calling the PI Webservice:
1) Created Adaptive Webservice Model
2) Provided PI Webservice URL (It prompts for PI System UserId and Password)
3) Selected Option - No Service Group Configuration
4) Provided Logical Destination
6) Completed creation of Model
7) Added the model as a UsedModel
8) Right Click on Comp Contr. and selected Apply Template and Created a ServiceController for the model (Entire mapping to comp contr, Initializing the nodes is taken care by Service Contr.)
9) Created an Template Action button and there by calling execute method which is auto rendered from CompContr..
10) Build the project.
11) Activated the code and Run the Application.
12) Getting the below error which is showed in the message.
ERROR MESSAGE:
Exception on execution of web service on destination 'GetPIHRPeopleData' for operation 'SI_CreateHRPeopleData_OS' in interface 'SI_CreatePeopleCompany_OS'

Hi Sankar,
If the webservice is working fine in the Wsnavigator then there is some problem with importing the webservice in webdynpro for Java. Please check the required parameter for creating the Adaptive Webservice Model. After adding in the used model and compoent controller binding, you need to write code for to execute the webservice model.
Please check the code for initialization and execution for the webservice and then test it.
Best Regards,
Arun Jaiswal

Select * from tab is not working in oracle 10g

select * from tab is not working in oracle 10g. But at the same time,
select * from <<table>> is working.
Please advise me.

This works for me in 10.2.0.2
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
SQL> select * from tab;
TNAME                          TABTYPE            CLUSTERID
LOAN_DETAIL                    TABLE
PLAN_TABLE                     TABLE
...

When I click PDF file, the file does not open and installation software for creative suite automatically begin to start. Even after re-installation of creative suite 5.5, only acrobat reader dose not work and the same phenomena occurs.

When I click PDF file, the file does not open and installation software for creative suite automatically begin to start. Even after re-installation of creative suite 5.5, only acrobat reader dose not work and the same phenomena occurs.

Did you ever install Acrobat? It is not installed automatically with CS, but requires an extra installation step.

Iphone not work i can only see the APPLE NOT WORK, iphone not work i can only see the APPLE NOT WORK

iphone not work i can only see the APPLE NOT WORK, iphone not work i can only see the APPLE NOT WORK

First, try to reset by holding the sleep and home button for about 10sec, until the Apple logo comes back again.
If this does not help, connect in recovery mode and restore, explained in this article: iOS: Unable to update or restore

I bought the production premium , cs6 , and I download it and registered with out any problem , I formatted my computer then I downloaded the collection , now everything else working only after effect is not working , what shall i do

I bought the production premium , cs6 , and I download it and registered with out any problem , I formatted my computer then I downloaded the collection , now everything else working only after effect is not working , what shall i do

did ae install without problem? check the install logs to be sure (Troubleshoot with install logs | CS5, CS5.5, CS6, CC)
if it did, what do you see when clicking the executable?

Need to re-install CS5.5 on my new hard drive. Serial number from disk package not working.

I need to re-install CS5.5 on my new hard drive. Serial number from disk package not working.

if there's a problem with the number of installations, you'll see a message about an excess activation problem.
if that's what you're seeing, contact adobe support for an activation count reset, https://helpx.adobe.com/contact.html
otherwise, attach a screenshot of the error message or quote it.

Setting of "opening web pages from last session"not works when open next time

In Options, setting to "open windows & tab pages from last time" does not work. I have tries several time but nothing happens. have written to you earlier also , please help

''setting to "open windows & tab pages from last time" does not work.''
That would be very surprising but a change was made to Firefox 4 to always have the choice of going to History ("Alt+S") and choose "Restore previous session".
With Firefox 5 coming out in a few days (June 21-22) you might try again then, if the solution the developers built in does not work for you. Do you know about pinning tabs ('''app-tabs''') they persist across sessions as a convenience -- if I really want to keep something permanently then I would bookmark such things as a group. Because they can be closed easily.

How to restrict URL to open only from Forms and not from Browser

Hi,
Our application built in Oracle Forms 10g, calls a URL.
The URL is essentially a path on the application server where files are stored. Users can access this to download files from the server.
However the URL can also be opened independently from the browser.
Is there any way, such that the URL can only be opened through the application, and it should be denied when it is opened through the browser.
More details :
Server : itabc123
Location on server : /home/rpdabc/interface/outward/
Alias created in httpd.conf : /rpdabc-dir/ "/home/rpdabc/interface/outward/"
<Directory "/home/rpdabc/interface/outward/">
Options Indexes Multiviews
</Directory>
from application : web.show_document('http://itabc123:7778/rpdbabc-dir');
Kindly advise,
Thanking you,
Rocky

Actually, there are several options including the one already offered above. Here are a few more:
1. If you are using 10.1.2.3 and a newer JRE on the client (e.g. 1.6.0_10 or newer), you could use java script to open the report. This will not be a perfect solution because it may not work if using a non-IE browser or if java scripting is disabled. Refer to MyOracleSupport Article 265863.1 for more information.
EXAMPLE:
WEB.SHOW_DOCUMENT ('javascript:void(window.open("http://www.oracle.com","","location=no,toolbar=no,menubar=no,"));self.close()','_blank');Replace the url in the above example with the call to your report.
2. Set the age of the cache to a very short value so that it is only available long enough to be viewed by the user who created it. In other words, when setting the reports properties in your Forms code, include the Reports "others" parameter with TOLERANCE=1
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'TOLERANCE=1');This will cause the cache (on the server) to live for only one minute then be deleted. Refer to the Report Deployment Guide for more information.
3. Upgrade to Fusion Middleware (Forms/Reports) 11. In version 11, the Reports jobid can be randomized. See section 18.8.2 of the Reports 11 Deployment Guide
http://download.oracle.com/docs/cd/E14571_01/bi.1111/b32121/toc.htm

IPhone 6 Battery Usage setting not working.

When I go to my setting and check my Battery Usage setting it states: "Battery information will be available after using iPhone for a few minutes". I've been using it for hours and I get the same response when I go to the setting. I've turned off my phone multiple times to see if that would resolve it, but it hasn't. Is anyone else experiencing this behavior?

Hello.
I have the same problem. iPhone 5, iOS8.0.2, used for a few days - still no usage statistics, only "Battery information will be available after using iPhone for a few minutes".
I tried restore iPhone (DFU) without restoring backup from iCloud/iTunes, resets, hard-resets, erase all settings, drain battery to 0% and charge to 100% overnight etc. - nothing helps.
I wrote to the Apple about this problem.
Here is the page that you can use to contact with Apple and report a bug - https://www.apple.com/feedback/iphone.html
Please, give the title of "iOS8 battery usage statistics not working" (or something like that), choose the "Bug report" and describe the problem. Perhaps it will make that Apple will eliminate this problem in the next version of iOS. More report - greater chance.
Regards

ACS 5.3 - comman sets not working

We installed ACS 5.3 on Vmware -cent os , and a cisco router is configured to authenticate to this TACACS+ server ,
i am able to login to router using the specified TACACS username ./ password and able to see the hits also as below in the policy ,
But the Command sets are not working as definded, pls help me to find the problem..
Filter:
StatusNameIdentity GroupNDG:LocationNDG:Device TypeTime And DateCommand SetsShell ProfileHit Counts
Match if:
EqualsNot Equals
EnabledDisabledMonitor Only
Status
Name
Conditions
Results
Hit Count
Identity Group
NDG:Location
NDG:Device Type
Time And Date
Command Sets
Shell Profile
1
RO ACCESS
in All Groups:READ ONLY ACCESS
in All Locations
in All Device Types
-ANY-
READ ONLY POLICY
RO SHELL
10
2
RESTRICTED ACCESS
in All Groups:RESTRICTED ACCESS
in All Locations
in All Device Types
-ANY-
RESTRICTED USER POLICY
Permit Access
1
3
SUPER ADMIN ACCESS
in All Groups:FULL ACCESS
in All Locations
in All Device Types
-ANY-
PERMIT ALL POLICY
Permit Access
0

Logs for such a RO-read only user login
AAA Protocol > TACACS+ Authentication Details
Date :
August 27, 2012
Generated on August 28, 2012 7:13:37 AM UTC
Authentication Details
Status:
Passed
Failure Reason:
Logged At:
Aug 27, 2012 12:18 PM
ACS Time:
Aug 27, 2012 12:18 PM
ACS Instance:
acsserver
Authentication Method:
PAP_ASCII
Authentication Type:
ASCII
Privilege Level:
15
User
Username:
muthu
Remote Address:
172.20.1.25
Network Device
Network Device:
Default Network Device
Network Device IP Address:
192.168.251.26
Network Device Groups:
Device Type:All Device Types, Location:All Locations
Access Policy
Access Service:
TAFE POLICY1
Identity Store:
Internal Users
Selected Shell Profile:
RO SHELL
Active Directory Domain:
Identity Group:
All Groups:READ ONLY ACCESS
Access Service Selection Matched Rule :
Rule-2
Identity Policy Matched Rule:
Default
Selected Identity Stores:
Internal Users, Internal Users
Query Identity Stores:
Selected Query Identity Stores:
Group Mapping Policy Matched Rule:
Default
Authorization Policy Matched Rule:
RO ACCESS
Authorization Exception Policy Matched Rule:
Other
ACS Session ID:
acsserver/132692348/212
Service:
Login
AV Pairs:
Response Time:
4
Other Attributes:
ACSVersion=acs-5.3.0.40-B.839
ConfigVersionId=97
Protocol=Tacacs
Type=Authentication
Action=Login
Port=tty194
Action=Login
Port=tty194
UserIdentityGroup=IdentityGroup:All Groups:READ ONLY ACCESS
Authentication Result
Type=Authentication
Authen-Reply-Status=Pass
Steps
Get TACACS+ default network device setting.
Received TACACS+ Authentication START Request
Evaluating Service Selection Policy
Matched rule
Selected Access Service - TAFE POLICY1
Returned TACACS+ Authentication Reply
Get TACACS+ default network device setting.
Received TACACS+ Authentication CONTINUE Request
Using previously selected Access Service
Evaluating Identity Policy
Matched Default Rule
Selected Identity Store - Internal Users
Looking up User in Internal Users IDStore - muthu
Found User in Internal Users IDStore
TACACS+ will use the password prompt from global TACACS+ configuration.
Returned TACACS+ Authentication Reply
Get TACACS+ default network device setting.
Received TACACS+ Authentication CONTINUE Request
Using previously selected Access Service
Evaluating Identity Policy
Matched Default Rule
Selected Identity Store - Internal Users
Looking up User in Internal Users IDStore - muthu
Found User in Internal Users IDStore
Authentication Passed
Evaluating Group Mapping Policy
Matched Default Rule
Evaluating Exception Authorization Policy
No rule was matched
Evaluating Authorization Policy
Matched rule
Returned TACACS+ Authentication Reply
Additional Details
Diagnostics ACS Configuration Changes

"Values only from infoprovider" setting not working

Similar Messages

Maybe you are looking for