Variable Manager can't connect to localhost

Hi all,
I'm runnin LabView 8.5 and am replacing an old computer. I've installed LabView on my new pc and done all the device drivers, but when I go into variable manager there is a cross next to Local System and when I click new process it gives an error saying it cannot connect to localhost...
I tried restarting the NI services in services.msc as suggested elsewhere on this forum, but no luck...
Any thoughts?

Is it possible that some firewall is active on the PC which prevents communication on that port?
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

Similar Messages

  • Can't Connect on localhost on new install of CM 13

    Just installed CM 13 to try. Install went fine but when i run, it can't connect to localhost. I have tried replacing localhost with the computer name. Thinking it could be the port but i'm not sure how to change. Also thought it could be firewall. I'm using windows firewall. Computer is XP.
    thanks

    Open task manager and bring up the processes tab.
    Look for 'ExpService.exe'
    Is the memory usage around 350-380k?
    If not, I would check the log files (expconsole.log or server.log) for any port conflict messages.
    To rule out the firewall, just turn it off and restart the CM service.

  • Adobe cloud application manager - can not connect to internet

    To ADOBE - The Adode cloud Order no is DSSY006786009DT and is current
    The Adobe cloud application manager - can not connect to internet even though there is internet connection and says it might be time zone error but that is correct  - Sydney Australia
    Question:
         1. Is anybody else having this problem
         2. How do we fix
    I already changed the time zone east coast US - did not change anything
    Could it be a corrupt program - thus requiring to reinstall program Application manager
    I am using Windows 7.
    It has been like it for ten days - It asks to log in everytime I turn computer on
    All programs in Creative Cloud work
    Any suggestions and solution
    Online help and phone help had no solutions other than what I suggested - that is reload application manager
    Thanks for help
    Ian Cleland

    The Creative Cloud File Synching was just offline, should be online now again.
    See top off: http://forums.adobe.com/community/creative_cloud/creative_cloud_connection
    Maybe that was your problem.

  • Oracle Enterprise Manager can't connect to database after installation

    Hello, I have a problem with Enterprise Manager. I installed Oracle 10g and the patch 10.2.0.2. After install, I could connect to database from SqlPlus without problems, but when I try to connect from AllPrograms - Oracle - DatabaseControl or since the Web browser with http://servername:1158/em nothing happen. I reviewed the status of dbconsole with emctl status dbconsole but the status is running. I recreated the repository with emca -deconfig.......-repos drop and emca -config ...... -repos create , but nothing happened. I reviewed some threads in this forum, but I didn't find the solution. Finally I could connect from the browser but with http://localhost:1158/em. Do you help me how can I connect from Database Control, because the operators in Computer Center should monitor the instance since there, and when I want to connect since my own PC how can do it?
    Thanks for your help and excuse my English, I am from Bogotá Colombia.
    Sincerely Rubén

    Hi,
    Check the network connectivity between db server and pc from where u want to access em.
    Check the listener service.
    Check firewall settings, it should be off.
    Regards,
    Xaheer

  • [Help] Can't Connect to LocalHost

    Hi, I am in need of some help here, and would be really grateful if you can help to solve my problem.
    I changed some of my settings on System Preferences > Networking, changed the DHCP to manual and inserting my own values, and inserted my own DNS Servers.
    I changed them back to exactly what it looked like before after a while, and rebooted my Mac, restarted my wireless modem, and reconnected to my network.
    http://img96.imageshack.us/img96/1738/screenshot20100424atpm1.png
    http://img705.imageshack.us/img705/1738/screenshot20100424atpm1.png
    Now, I cannot access localhost/127.0.0.1 on my Safari, it was working before I edited the settings. I am getting +"Safari can’t open the page “http://localhost/” because Safari can’t connect to the server “localhost”."
    I hope that anyone to be kind and help to solve my problem although there are no returns, you would have done a good deed. Thank you.

    Best thing to edit those files is [TextWrangler|http://www.barebones.com/products/textwrangler>. It will allow you to open files in hidden locations and to authenticate the changes. From TextWrangler's Open Hidden… command, follow the path to the httpd.conf file. Another way to get to the file is use the Finder>Go>Go to Folder command and type /etc/apache2/.
    You can turn on line numbers in TextWrangler using the dropdown in the toolbar that looks like a letter T with a light switch.
    Scroll down to line 167 and make sure it looks like thisDocumentRoot "/Library/WebServer/Documents"And, make sure that directory exists.

  • Network Manager Can't Connect Wirelessly

    Hi everyone,
    I'm trying to migrate from Connman to Network Manager for my network needs (as well as from e17 to xmonad) and I'm seeing some strange behavior. I can get the network manager applet running, but it won't connect to any wireless networks. I see a bunch of networks floating around in the connections list, but if I click on one, nothing happens. Furthermore, if I try to connect by command line, I get the following weirdness
    Input:
    nmcli con up uuid f767eb89-ccbc-4dbe-bf12-af216ab8f9ff ap A0:21:B7:72:A3:CE
    (the uuid is for my wlan0 interface and the ap is the BSSID of my network).
    Output:
    Active connection state: activating
    Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/0
    ** (process:2012): WARNING **: _nm_object_get_property: Error getting 'State' for /org/freedesktop/NetworkManager/ActiveConnection/0: (19) Method "Get" with signature "ss" on interface "org.freedesktop.DBus.Properties" doesn't exist
    state: unknown
    Error: Connection activation failed.
    I'm fairly sure that I have my policy kit working correctly. I have dbus and network manager as daemons and I logged in to an xmonad session using GDM, which should do my policy management for me, right?
    I think its the wrong error message for a policy kit error anyways.
    Any ideas?
    Thanks in advance!
    Last edited by Yurlungur (2012-04-16 04:29:32)

    I switched to wicd, so this isn't an issue anymore, I guess... still not sure what was going wrong, though.

  • CreativeCloud Manager can't connect to Internet

    HI,
    After updating app mamager, and install CreativeCloud Manager successfully,
    At launch, using my credentials, Creative Cloud cant connect to internet...
    I assume here is something partcular to my enterprise network configuration however this issue happens only on a PC but all works fine on a Mac...
    Has anybody some hints to help me fix this ?
    Many thanks

    I've finally sorted it. We'd actually had some access control applied on our network last week which restricted our connections to having to go through our proxy server. In IE I had the 'Automatically detect settings' option checked in the LAN settings, but not the 'Use a proxy server for your LAN' option. This was enough for everything else to access the internet by picking up the settings from the network, but it seems that Adobe requires the settings to be explicity in the 'Proxy server' settings area (the log file was showing that it couldn't find any proxy server settings when attempting to connect). Once I'd checked the box to use the proxy server settings, Adobe could connect successfully.

  • Adobe Application Manager can't connect from Premiere Elements 11 in Windows 8

    Is this a Windows 8 issue or an Adobe issue?

    What is the exact error message you are receiving?  Can you post a screenshot of the error?

  • I upgraded to GB 10.0.2.  But now its sandboxing 3rd pty apps and plugins can't connect to license manager. a Work around?

    I had been using Garageband and downloaded some 3rd  party apps which worked great, among them was BFD ECO.  I just upgraded my iMac to Yosemite and so I could upgrade to the Garageband 10.0.02. Great program, however, BFD ECO no only opens in plugin window in an error message that says, " Can't open BFD ECO because can not locate the license manager. I contacted BFD who told me that the license manager can't connect to garageband because its being "sandboxed", due to changes in the new GB and to contact Apple for a work around. Thanks for your help.

    I had been using Garageband and downloaded some 3rd  party apps which worked great, among them was BFD ECO.  I just upgraded my iMac to Yosemite and so I could upgrade to the Garageband 10.0.02. Great program, however, BFD ECO no only opens in plugin window in an error message that says, " Can't open BFD ECO because can not locate the license manager. I contacted BFD who told me that the license manager can't connect to garageband because its being "sandboxed", due to changes in the new GB and to contact Apple for a work around. Thanks for your help.

  • I Cant connect to Localhost after installing sql Server 2012 r2 Sp2

    Hi,
    I can't connect to localhost after installing ssms. Also, I can't find SQL on Services. Do you have any ideal? Thanks!

    where can i download the database engine component?
    You can download Express or Evaluation edition which are free to download. here is the download link for SQL 2012
    Microsoft® SQL Server® 2012 Express
    http://www.microsoft.com/en-us/download/details.aspx?id=29062
    Microsoft® SQL Server® 2012 Evaluation
    http://www.microsoft.com/en-us/download/details.aspx?id=29066
    Balmukund Lakhani
    Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
    This posting is provided "AS IS" with no warranties, and confers no rights.
    My Blog |
    Team Blog | @Twitter
    | Facebook
    Author: SQL Server 2012 AlwaysOn -
    Paperback, Kindle

  • Network Manager fails to connect with Huawei E3276 modem after upgrade

    Hi,
    I have Huawei E3276 (lsusb: Huawei Technologies Co., Ltd. E398 LTE/UMTS/GSM Modem/Networkcard).
    I wasn't updating the system for a long time (since KDE 4.14.3), but after upgrade Network Manager can't connect anymore.
    I also tried on the fresh install on different machine (KDE + Plasma 5.3), but I get the same error...
    Error: failed to connect modem: Only IPv4 is supported by this modem.
    I realize that this problem has nothing to do with KDE, but with new version of NM + MM, systemd, dhcpcd or dhclient?
    Why now Network Manager don't use ppp like before upgrade (different connection type "cdc-wdm0")?
    I would be grateful for any advice.
    After upgrade (KDE 4.14.3 -> 15.04 apps/5.2 plasma):
    may 07 17:18:58 AsusN56VZ NetworkManager[239]: <info> (cdc-wdm0): Activation: starting connection 'Orange'
    may 07 17:18:58 AsusN56VZ NetworkManager[239]: <info> (cdc-wdm0): Activation: Stage 1 of 5 (Device Prepare) scheduled...
    may 07 17:18:58 AsusN56VZ NetworkManager[239]: <info> (cdc-wdm0): Activation: Stage 1 of 5 (Device Prepare) started...
    may 07 17:18:58 AsusN56VZ NetworkManager[239]: <info> (cdc-wdm0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
    may 07 17:18:58 AsusN56VZ NetworkManager[239]: <info> NetworkManager state is now CONNECTING
    may 07 17:18:58 AsusN56VZ NetworkManager[239]: <info> (cdc-wdm0): device state change: prepare -> need-auth (reason 'none') [40 60 0]
    may 07 17:18:58 AsusN56VZ NetworkManager[239]: <info> (cdc-wdm0): Activation: Stage 1 of 5 (Device Prepare) complete.
    may 07 17:18:58 AsusN56VZ NetworkManager[239]: <info> (cdc-wdm0): Activation: Stage 1 of 5 (Device Prepare) scheduled...
    may 07 17:18:58 AsusN56VZ NetworkManager[239]: <info> (cdc-wdm0): Activation: Stage 1 of 5 (Device Prepare) started...
    may 07 17:18:58 AsusN56VZ NetworkManager[239]: <info> (cdc-wdm0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
    may 07 17:18:58 AsusN56VZ NetworkManager[239]: <info> (cdc-wdm0): Activation: Stage 1 of 5 (Device Prepare) complete.
    may 07 17:18:58 AsusN56VZ ModemManager[358]: <info> Simple connect started...
    may 07 17:18:58 AsusN56VZ ModemManager[358]: <info> Simple connect state (4/8): Wait to get fully enabled
    may 07 17:18:58 AsusN56VZ ModemManager[358]: <info> Simple connect state (5/8): Register
    may 07 17:18:58 AsusN56VZ ModemManager[358]: <info> Simple connect state (6/8): Bearer
    may 07 17:18:58 AsusN56VZ ModemManager[358]: <info> Simple connect state (7/8): Connect
    may 07 17:18:58 AsusN56VZ ModemManager[358]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (registered -> connecting)
    may 07 17:18:58 AsusN56VZ ModemManager[358]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (connecting -> registered)
    may 07 17:18:58 AsusN56VZ NetworkManager[239]: <info> (cdc-wdm0): modem state changed, 'registered' --> 'connecting' (reason: user-requested)
    may 07 17:18:58 AsusN56VZ NetworkManager[239]: <info> (cdc-wdm0): modem state changed, 'connecting' --> 'registered' (reason: user-requested)
    may 07 17:18:58 AsusN56VZ NetworkManager[239]: <warn> (cdc-wdm0) failed to connect modem: Only IPv4 is supported by this modem
    may 07 17:18:58 AsusN56VZ NetworkManager[239]: <info> (cdc-wdm0): device state change: prepare -> failed (reason '(null)') [40 120 1]
    may 07 17:18:58 AsusN56VZ NetworkManager[239]: <info> NetworkManager state is now DISCONNECTED
    may 07 17:18:58 AsusN56VZ NetworkManager[239]: <info> Disabling autoconnect for connection 'Orange'.
    may 07 17:18:58 AsusN56VZ NetworkManager[239]: <warn> (cdc-wdm0): Activation: failed for connection 'Orange'
    may 07 17:18:58 AsusN56VZ NetworkManager[239]: <info> (cdc-wdm0): device state change: failed -> disconnected (reason 'none') [120 30 0]
    may 07 17:18:58 AsusN56VZ NetworkManager[239]: <info> (cdc-wdm0): deactivating device (reason 'none') [0]
    Before upgrade (KDE 4.14)
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> Activation (ttyUSB1) starting connection 'Orange'
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> (ttyUSB1): device state change: disconnected -> prepare (reason 'none') [30 40 0]
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> NetworkManager state is now CONNECTING
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> Activation (ttyUSB1) Stage 1 of 5 (Device Prepare) scheduled...
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> Activation (ttyUSB1) Stage 1 of 5 (Device Prepare) started...
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> Activation (ttyUSB1) Stage 1 of 5 (Device Prepare) complete.
    mar 23 19:31:33 AsusN56VZ ModemManager[267]: <info> Simple connect started...
    mar 23 19:31:33 AsusN56VZ ModemManager[267]: <info> Simple connect state (4/8): Wait to get fully enabled
    mar 23 19:31:33 AsusN56VZ ModemManager[267]: <info> Simple connect state (5/8): Register
    mar 23 19:31:33 AsusN56VZ ModemManager[267]: <info> Simple connect state (6/8): Bearer
    mar 23 19:31:33 AsusN56VZ ModemManager[267]: <info> Simple connect state (7/8): Connect
    mar 23 19:31:33 AsusN56VZ ModemManager[267]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (registered -> connecting)
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> (ttyUSB1) modem state changed, 'registered' --> 'connecting' (reason: user-requested)
    mar 23 19:31:33 AsusN56VZ ModemManager[267]: <warn> (ttyUSB0): port attributes not fully set
    mar 23 19:31:33 AsusN56VZ ModemManager[267]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (connecting -> connected)
    mar 23 19:31:33 AsusN56VZ ModemManager[267]: <info> Simple connect state (8/8): All done
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> (ttyUSB1) modem state changed, 'connecting' --> 'connected' (reason: user-requested)
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <warn> (ttyUSB0): failed to look up interface index
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> Activation (ttyUSB1) Stage 2 of 5 (Device Configure) scheduled...
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> Activation (ttyUSB1) Stage 2 of 5 (Device Configure) starting...
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> (ttyUSB1): device state change: prepare -> config (reason 'none') [40 50 0]
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> Activation (ttyUSB1) Stage 2 of 5 (Device Configure) successful.
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> Activation (ttyUSB1) Stage 3 of 5 (IP Configure Start) scheduled.
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> Activation (ttyUSB1) Stage 2 of 5 (Device Configure) complete.
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> Activation (ttyUSB1) Stage 3 of 5 (IP Configure Start) started...
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> (ttyUSB1): device state change: config -> ip-config (reason 'none') [50 70 0]
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> using modem-specified IP timeout: 20 seconds
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> starting PPP connection
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> pppd started with pid 780
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> Activation (ttyUSB1) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> Activation (ttyUSB1) Stage 3 of 5 (IP Configure Start) complete.
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> Activation (ttyUSB1) Stage 4 of 5 (IPv6 Configure Timeout) started...
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <info> Activation (ttyUSB1) Stage 4 of 5 (IPv6 Configure Timeout) complete.
    mar 23 19:31:33 AsusN56VZ pppd[780]: Plugin /usr/lib/pppd/2.4.6/nm-pppd-plugin.so loaded.
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: Plugin /usr/lib/pppd/2.4.6/nm-pppd-plugin.so loaded.
    mar 23 19:31:33 AsusN56VZ kernel: PPP generic driver version 2.4.2
    mar 23 19:31:33 AsusN56VZ pppd[780]: pppd 2.4.6 started by root, uid 0
    mar 23 19:31:33 AsusN56VZ pppd[780]: Using interface ppp0
    mar 23 19:31:33 AsusN56VZ pppd[780]: Connect: ppp0 <--> /dev/ttyUSB0
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: Using interface ppp0
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: Connect: ppp0 <--> /dev/ttyUSB0
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: <warn> /sys/devices/virtual/net/ppp0: couldn't determine device driver; ignoring...
    mar 23 19:31:33 AsusN56VZ pppd[780]: CHAP authentication succeeded: Welcome!!
    mar 23 19:31:33 AsusN56VZ pppd[780]: CHAP authentication succeeded
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: CHAP authentication succeeded: Welcome!!
    mar 23 19:31:33 AsusN56VZ NetworkManager[268]: CHAP authentication succeeded
    mar 23 19:31:33 AsusN56VZ kernel: PPP BSD Compression module registered
    mar 23 19:31:33 AsusN56VZ kernel: PPP Deflate Compression module registered
    mar 23 19:31:35 AsusN56VZ ModemManager[267]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: access technology changed (umts -> hspa-plus)
    mar 23 19:31:35 AsusN56VZ NetworkManager[268]: <info> PPP manager(IP Config Get) reply received.
    mar 23 19:31:35 AsusN56VZ NetworkManager[268]: <info> Activation (ttyUSB1) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
    mar 23 19:31:35 AsusN56VZ NetworkManager[268]: <info> Activation (ttyUSB1) Stage 5 of 5 (IPv4 Commit) started...
    Linux Mint 17.1 KDE (works the same like Arch before update)
    May 7 20:06:33 mint17-vm NetworkManager[835]: <info> Activation (ttyUSB1) starting connection 'Orange Standard access - with image compression'
    May 7 20:06:33 mint17-vm NetworkManager[835]: <info> (ttyUSB1): device state change: disconnected -> prepare (reason 'none') [30 40 0]
    May 7 20:06:33 mint17-vm NetworkManager[835]: <info> NetworkManager state is now CONNECTING
    May 7 20:06:33 mint17-vm NetworkManager[835]: <info> Activation (ttyUSB1) Stage 1 of 5 (Device Prepare) scheduled...
    May 7 20:06:33 mint17-vm NetworkManager[835]: <info> Activation (ttyUSB1) Stage 1 of 5 (Device Prepare) started...
    May 7 20:06:33 mint17-vm NetworkManager[835]: <info> Activation (ttyUSB1) Stage 1 of 5 (Device Prepare) complete.
    May 7 20:06:33 mint17-vm ModemManager[781]: <info> Simple connect started...
    May 7 20:06:33 mint17-vm ModemManager[781]: <info> Simple connect state (3/8): Enable
    May 7 20:06:33 mint17-vm ModemManager[781]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (disabled -> enabling)
    May 7 20:06:33 mint17-vm NetworkManager[835]: <info> (ttyUSB1) modem state changed, 'disabled' --> 'enabling' (reason: user-requested)
    May 7 20:06:33 mint17-vm ModemManager[781]: <warn> (ttyUSB1): port attributes not fully set
    May 7 20:06:33 mint17-vm ModemManager[781]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: 3GPP Registration state changed (unknown -> registering)
    May 7 20:06:33 mint17-vm ModemManager[781]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: 3GPP Registration state changed (registering -> home)
    May 7 20:06:34 mint17-vm ModemManager[781]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: signal quality updated (80)
    May 7 20:06:35 mint17-vm ModemManager[781]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (enabling -> registered)
    May 7 20:06:35 mint17-vm ModemManager[781]: <info> Simple connect state (4/8): Wait to get fully enabled
    May 7 20:06:35 mint17-vm ModemManager[781]: <info> Simple connect state (5/8): Register
    May 7 20:06:35 mint17-vm ModemManager[781]: <info> Simple connect state (6/8): Bearer
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> (ttyUSB1) modem state changed, 'enabling' --> 'registered' (reason: user-requested)
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> WWAN now enabled by management service
    May 7 20:06:35 mint17-vm ModemManager[781]: <info> Simple connect state (7/8): Connect
    May 7 20:06:35 mint17-vm ModemManager[781]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (registered -> connecting)
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> (ttyUSB1) modem state changed, 'registered' --> 'connecting' (reason: user-requested)
    May 7 20:06:35 mint17-vm ModemManager[781]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: signal quality updated (77)
    May 7 20:06:35 mint17-vm ModemManager[781]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: access technology changed (unknown -> lte)
    May 7 20:06:35 mint17-vm ModemManager[781]: <warn> (ttyUSB0): port attributes not fully set
    May 7 20:06:35 mint17-vm ModemManager[781]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (connecting -> connected)
    May 7 20:06:35 mint17-vm ModemManager[781]: <info> Simple connect state (8/8): All done
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> (ttyUSB1) modem state changed, 'connecting' --> 'connected' (reason: user-requested)
    May 7 20:06:35 mint17-vm NetworkManager[835]: <warn> (ttyUSB0): failed to look up interface index
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> Activation (ttyUSB1) Stage 2 of 5 (Device Configure) scheduled...
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> Activation (ttyUSB1) Stage 2 of 5 (Device Configure) starting...
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> (ttyUSB1): device state change: prepare -> config (reason 'none') [40 50 0]
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> Activation (ttyUSB1) Stage 2 of 5 (Device Configure) successful.
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> Activation (ttyUSB1) Stage 3 of 5 (IP Configure Start) scheduled.
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> Activation (ttyUSB1) Stage 2 of 5 (Device Configure) complete.
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> Activation (ttyUSB1) Stage 3 of 5 (IP Configure Start) started...
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> (ttyUSB1): device state change: config -> ip-config (reason 'none') [50 70 0]
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> using modem-specified IP timeout: 20 seconds
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> starting PPP connection
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> pppd started with pid 2468
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> Activation (ttyUSB1) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> Activation (ttyUSB1) Stage 3 of 5 (IP Configure Start) complete.
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> Activation (ttyUSB1) Stage 4 of 5 (IPv6 Configure Timeout) started...
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> Activation (ttyUSB1) Stage 4 of 5 (IPv6 Configure Timeout) complete.
    May 7 20:06:35 mint17-vm pppd[2468]: Plugin /usr/lib/i386-linux-gnu/pppd/2.4.5/nm-pppd-plugin.so loaded.
    May 7 20:06:35 mint17-vm pppd[2468]: pppd 2.4.5 started by root, uid 0
    May 7 20:06:35 mint17-vm pppd[2468]: Using interface ppp0
    May 7 20:06:35 mint17-vm pppd[2468]: Connect: ppp0 <--> /dev/ttyUSB0
    May 7 20:06:35 mint17-vm NetworkManager[835]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/ppp0, iface: ppp0)
    May 7 20:06:35 mint17-vm NetworkManager[835]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown configuration found.
    May 7 20:06:35 mint17-vm NetworkManager[835]: <warn> /sys/devices/virtual/net/ppp0: couldn't determine device driver; ignoring...
    May 7 20:06:35 mint17-vm pppd[2468]: CHAP authentication succeeded: Welcome!!
    May 7 20:06:35 mint17-vm pppd[2468]: CHAP authentication succeeded
    May 7 20:06:35 mint17-vm kernel: [ 82.363825] PPP BSD Compression module registered
    May 7 20:06:35 mint17-vm kernel: [ 82.368188] PPP Deflate Compression module registered
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> PPP manager(IP Config Get) reply received.
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> Activation (ttyUSB1) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
    May 7 20:06:35 mint17-vm NetworkManager[835]: <info> Activation (ttyUSB1) Stage 5 of 5 (IPv4 Commit) started...
    May 7 20:06:36 mint17-vm NetworkManager[835]: <info> (ttyUSB1): device state change: ip-config -> secondaries (reason 'none') [70 90 0]
    May 7 20:06:36 mint17-vm NetworkManager[835]: <info> Activation (ttyUSB1) Stage 5 of 5 (IPv4 Commit) complete.
    May 7 20:06:36 mint17-vm NetworkManager[835]: <info> (ttyUSB1): device state change: secondaries -> activated (reason 'none') [90 100 0]
    May 7 20:06:36 mint17-vm NetworkManager[835]: <info> NetworkManager state is now CONNECTED_GLOBAL
    Last edited by Shocker (2015-05-07 19:18:43)

    This week, after update, modem works again.
    However, there's a new bug in the kernel, which was not there before:
    kernel: huawei_cdc_ncm 3-2:1.2 wwp0s20u2i2: kevent 12 may have been dropped
    but the modem works and connects to the network.
    may 24 09:32:44 AsusN56VZ NetworkManager[342]: <info> Auto-activating connection 'Orange'.
    may 24 09:32:44 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): Activation: starting connection 'Orange'
    may 24 09:32:44 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): Activation: Stage 1 of 5 (Device Prepare) scheduled...
    may 24 09:32:44 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): Activation: Stage 1 of 5 (Device Prepare) started...
    may 24 09:32:44 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
    may 24 09:32:44 AsusN56VZ NetworkManager[342]: <info> NetworkManager state is now CONNECTING
    may 24 09:32:44 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): Activation: Stage 1 of 5 (Device Prepare) complete.
    may 24 09:32:44 AsusN56VZ ModemManager[338]: <info> Simple connect started...
    may 24 09:32:44 AsusN56VZ ModemManager[338]: <info> Simple connect state (1/8): Unlock check
    may 24 09:32:47 AsusN56VZ ModemManager[338]: <info> Simple connect state (2/8): Wait to get fully initialized
    may 24 09:32:47 AsusN56VZ ModemManager[338]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (locked -> initializing)
    may 24 09:32:47 AsusN56VZ kernel: huawei_cdc_ncm 3-2:1.2: unknown notification 3 received: index 2 len 4
    may 24 09:32:47 AsusN56VZ kernel: huawei_cdc_ncm 3-2:1.2: unknown notification 3 received: index 2 len 4
    may 24 09:32:47 AsusN56VZ ModemManager[338]: Invalid mobile equipment error code: 50
    may 24 09:32:47 AsusN56VZ ModemManager[338]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (initializing -> disabled)
    may 24 09:32:47 AsusN56VZ ModemManager[338]: <info> Simple connect state (3/8): Enable
    may 24 09:32:47 AsusN56VZ ModemManager[338]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (disabled -> enabling)
    may 24 09:32:47 AsusN56VZ ModemManager[338]: <warn> (ttyUSB1): port attributes not fully set
    may 24 09:32:47 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): modem state changed, 'locked' --> 'disabled' (reason: unknown)
    may 24 09:32:47 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): modem state changed, 'disabled' --> 'enabling' (reason: user preference)
    may 24 09:32:47 AsusN56VZ NetworkManager[342]: <warn> (cdc-wdm0) failed to enable modem: GDBus.Error:org.freedesktop.ModemManager1.Error.Core.InProgress: Cannot enable modem: already being enabled
    may 24 09:32:47 AsusN56VZ ModemManager[338]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: 3GPP Registration state changed (unknown -> registering)
    may 24 09:32:47 AsusN56VZ ModemManager[338]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: 3GPP Registration state changed (registering -> home)
    may 24 09:32:48 AsusN56VZ kernel: huawei_cdc_ncm 3-2:1.2: unknown notification 3 received: index 2 len 4
    may 24 09:33:08 AsusN56VZ ModemManager[338]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (enabling -> registered)
    may 24 09:33:08 AsusN56VZ ModemManager[338]: <info> Simple connect state (4/8): Wait to get fully enabled
    may 24 09:33:08 AsusN56VZ ModemManager[338]: <info> Simple connect state (5/8): Register
    may 24 09:33:08 AsusN56VZ ModemManager[338]: <info> Simple connect state (6/8): Bearer
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): modem state changed, 'enabling' --> 'registered' (reason: user-requested)
    may 24 09:33:08 AsusN56VZ ModemManager[338]: <info> Simple connect state (7/8): Connect
    may 24 09:33:08 AsusN56VZ ModemManager[338]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (registered -> connecting)
    may 24 09:33:08 AsusN56VZ ModemManager[338]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (connecting -> registered)
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): modem state changed, 'registered' --> 'connecting' (reason: user-requested)
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): modem state changed, 'connecting' --> 'registered' (reason: user-requested)
    may 24 09:33:08 AsusN56VZ ModemManager[338]: <info> Simple connect started...
    may 24 09:33:08 AsusN56VZ ModemManager[338]: <info> Simple connect state (4/8): Wait to get fully enabled
    may 24 09:33:08 AsusN56VZ ModemManager[338]: <info> Simple connect state (5/8): Register
    may 24 09:33:08 AsusN56VZ ModemManager[338]: <info> Simple connect state (6/8): Bearer
    may 24 09:33:08 AsusN56VZ ModemManager[338]: <info> Simple connect state (7/8): Connect
    may 24 09:33:08 AsusN56VZ ModemManager[338]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (registered -> connecting)
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): modem state changed, 'registered' --> 'connecting' (reason: user-requested)
    may 24 09:33:08 AsusN56VZ ModemManager[338]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (connecting -> connected)
    may 24 09:33:08 AsusN56VZ ModemManager[338]: <info> Simple connect state (8/8): All done
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): modem state changed, 'connecting' --> 'connected' (reason: user-requested)
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): Activation: Stage 2 of 5 (Device Configure) scheduled...
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): Activation: Stage 2 of 5 (Device Configure) starting...
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): device state change: prepare -> config (reason 'none') [40 50 0]
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): Activation: Stage 2 of 5 (Device Configure) successful.
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): Activation: Stage 2 of 5 (Device Configure) complete.
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): Activation: Stage 3 of 5 (IP Configure Start) scheduled.
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): Activation: Stage 3 of 5 (IP Configure Start) started...
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): device state change: config -> ip-config (reason 'none') [50 70 0]
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> Activation (wwp0s20u2i2) Beginning DHCPv4 transaction (timeout in 15 seconds)
    may 24 09:33:08 AsusN56VZ kernel: huawei_cdc_ncm 3-2:1.2 wwp0s20u2i2: kevent 12 may have been dropped
    may 24 09:33:08 AsusN56VZ kernel: huawei_cdc_ncm 3-2:1.2 wwp0s20u2i2: kevent 12 may have been dropped
    may 24 09:33:08 AsusN56VZ kernel: huawei_cdc_ncm 3-2:1.2 wwp0s20u2i2: kevent 12 may have been dropped
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> dhclient started with pid 3624
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): IPv6 configuration disabled
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): Activation: Stage 3 of 5 (IP Configure Start) complete.
    may 24 09:33:08 AsusN56VZ dhclient[3624]: DHCPDISCOVER on wwp0s20u2i2 to 255.255.255.255 port 67 interval 7
    may 24 09:33:08 AsusN56VZ dhclient[3624]: DHCPREQUEST on wwp0s20u2i2 to 255.255.255.255 port 67
    may 24 09:33:08 AsusN56VZ dhclient[3624]: DHCPOFFER from 10.X.X.X
    may 24 09:33:08 AsusN56VZ dhclient[3624]: DHCPACK from 10.X.X.X
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> address 10.X.X.X
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> plen 30 (255.255.255.252)
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> gateway 10.X.X.X
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> server identifier 10.X.X.X
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> lease time 518400
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> nameserver '194.X.X.X'
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> nameserver '194.X.X.X'
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (wwp0s20u2i2): DHCPv4 state changed unknown -> bound
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): Activation: Stage 5 of 5 (IPv4 Configure Commit) scheduled...
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): Activation: Stage 5 of 5 (IPv4 Commit) started...
    may 24 09:33:08 AsusN56VZ avahi-daemon[1326]: Joining mDNS multicast group on interface wwp0s20u2i2.IPv4 with address 10.X.X.X.
    may 24 09:33:08 AsusN56VZ avahi-daemon[1326]: New relevant interface wwp0s20u2i2.IPv4 for mDNS.
    may 24 09:33:08 AsusN56VZ avahi-daemon[1326]: Registering new address record for 10.X.X.X on wwp0s20u2i2.IPv4.
    may 24 09:33:08 AsusN56VZ dhclient[3624]: bound to 10.X.X.X -- renewal in 252436 seconds.
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): device state change: ip-config -> ip-check (reason 'none') [70 80 0]
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): Activation: Stage 5 of 5 (IPv4 Commit) complete.
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): device state change: ip-check -> secondaries (reason 'none') [80 90 0]
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): device state change: secondaries -> activated (reason 'none') [90 100 0]
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> NetworkManager state is now CONNECTED_LOCAL
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> NetworkManager state is now CONNECTED_GLOBAL
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> Policy set 'Orange' (wwp0s20u2i2) as default for IPv4 routing and DNS.
    may 24 09:33:08 AsusN56VZ NetworkManager[342]: <info> Writing DNS information to /usr/bin/resolvconf
    may 24 09:33:09 AsusN56VZ NetworkManager[342]: <info> (cdc-wdm0): Activation: successful, device activated.

  • Oracle9iAS(9.0.2.0.1) Can't connect X11 Window Server Using localhost:0.0

    Hi, everyone:
    I have installed the Oracle9iAS(9.0.2.0.1), at the first time installation, every thing is succeed in Miracle Linux 2.0, but after i reboot linux pc, then
    #$ORACLE_HOME/bin/emctl start is also succeed,
    unfortunately after i connect to that pc by 1810 port,
    it display a web page with the message of
    Servlet error: Renderer failed:
    java.lang.NoClassDefFoundError can't connect X11 window
    server using 'localhost:0.0' as the value of the DISPLAY
    variable
    why, and how to solve this problem, thanks in advanced

    Check out the support matrix for deploying to different versions of OracleAS.
    http://otn.oracle.com/products/jdev/htdocs/9.0.5.1/install.html#supported
    Following how-to has an FAQ which has details about invalid servlet path error.
    http://otn.oracle.com/products/jdev/howtos/appservers/deployias.html#faq
    raghu
    JDev Team

  • Can't connect to X11 window server using 'localhost:0.0'

    Hello again,
    I tried as you suggested under the GUI environment of Red Hat Linux Enterprise 3 (WS).
    =====
    [root@Linux2005 /]# su - oracle
    [oracle@Linux2005 oracle]$ /OraHome1/Disk1/runInstaller
    [oracle@Linux2005 oracle]$ Initializing Java Virtual Machine from /tmp/OraInstall2004-08-18_09-03-45AM/jre/bin/java. Please wait...
    Xlib: connection to "localhost:0.0" refused by server
    Xlib: No protocol specified
    Exception in thread "main" java.lang.InternalError: Can't connect to X11 window server using 'localhost:0.0' as the value of the DISPLAY variable.
    at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
    at sun.awt.X11GraphicsEnvironment.<clinit>(X11GraphicsEnvironment.java:59)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:120)
    at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:58)
    at java.awt.Window.<init>(Window.java:188)
    at java.awt.Frame.<init>(Frame.java:315)
    at java.awt.Frame.<init>(Frame.java:262)
    at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:593)
    [oracle@Linux2005 oracle]$
    =====
    The server does not take it.
    What else can I do ? Any ideas ?
    PT

    I had the same problem (Oracle unbreakable Linux) and tried everything you suggest.
    Finally when I implement this in bash_profile of oracle user and relogin:
    # Oracle Settings
    TMP=/tmp; export TMP
    TMPDIR=$TMP; export TMPDIR
    ORACLE_BASE=/u01/app/oracle; export ORACLE_BASE
    ORACLE_HOME=$ORACLE_BASE/product/10.2.0/db_1; export ORACLE_HOME
    ORACLE_SID=TSH1; export ORACLE_SID
    ORACLE_TERM=xterm; export ORACLE_TERM
    PATH=/usr/sbin:$PATH; export PATH
    PATH=$ORACLE_HOME/bin:$PATH; export PATH
    LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib; export LD_LIBRARY_PATH
    CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib; export CLASSPATH
    if [ $USER = "oracle" ]; then
    if [ $SHELL = "/bin/ksh" ]; then
    ulimit -p 16384
    ulimit -n 65536
    else
    ulimit -u 16384 -n 65536
    fi
    fi
    runInstaller run as hell!

  • Query with bind variable, how can use it in managed bean ?

    Hi
    I create query with bind variable (BindControlTextValue), this query return description of value that i set in BindControlTextValue variable, how can i use this query in managed bean? I need to set this value in String parameter in managed bean.
    Thanks

    Put the query in a VO and execute it the usual way.
    If you need to, you can write a parameterized method in VOImpl that executes the VO query with the parameter and then call that method from the UI (as a methodAction binding) either through the managed bean or via a direct button click on the page.

  • Remote desktop connection manager on windows 8.1, can't connect to windows server 2012 R2, Socket closed

    remote desktop connection manager on windows 8.1, can't connect to windows server 2012 R2, Socket closed each time i try to open remote connection to the server,
    does remote desktop connection manager V2.2 not compatible with windows 8.1, and if so, is there are any other compatible versions
    or what's the problem,
    Mahmoud Sabry IT System Engineer

    this issue maybe will be fix by latest version, we still waiting for it
    maybe your issue can be fix using this methods
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/61f218a5-5ef8-49da-a035-90cdd64fc9a0/problem-with-remote-desktop-connection-manager-error-3334?forum=winserverTS
    http://shawn.meunier.com/?p=1#comment-43

Maybe you are looking for

  • How to remove characters/lines from the beginning of an InputStream

    Hi, I have a program which receives several InputStreams. From each of these streams I have to remove 2 lines from the beginning. After the lines are removed, all the streams are combined to one with SequenceInputStream and read in one chunk. Is ther

  • GETTING ERROR WHILE INSTALLING ECC6.0

    HI I am trying to install ecc6.0 in window2003 database is oracle10g  it was fine till database creation, when it reached to IMPORT ABAP  phase it started giving error. I got the error at the beggning of the phase i checked the logs a come to know th

  • EXTREMELY URGENT - Never seen this before

    gurus, i've portal 30982 on windows NT. i've to create a new application, following are the steps i'm following - 1. click navigator 2. click the applications tab 3. click create link 4. the schema that i want the application to be based on does not

  • Sync Help! Competing Libraries!

    I no longer have the original computer I began syncing my iPhone and iPad on, and have moved to my girlfriend's laptop. She has a full library; where I can log her out of iTunes, but her library stays. How do I sync to get updates and sync my iPad wi

  • Reset BPF step status for some of the company only

    Dear all,    For example , we got 5 steps.    All the companies finish to step 3.    The step 1 and 2 has been locked.     Suddenly, one of the company have to do some modification from step  2.    Is it possible to unlock step 2 for that company onl