VC05 - Department Responsible is not coiming in the output

Dear All,
When I am running the report VC05 it is not displaying the Department Responsible ....Please suggest how to get the Department Responsible in output.
This very urgent ...Please do the needful.

Can any one help me ....

Similar Messages

  • FINAL EXPORT / MIXDOWN FONCTION does not work. The Output Wave Resulting is a total silence?

    AUDITION FINAL EXPORT / MIXDOWN FONCTION does NOT ever work
    The Output Wave Resulting is a TOTAL SILENCE - NO SOUND AT ALL
    Bought & registered Program act as an expired DEMO...
    The result is a wave with a completely flat HORIZONTAL LINE of pure $300.00 rip off of SILENCE
    Even after many clean reinstallations AUDITION never is able to do a Final Mixdown with any Sound in it.
    A AUDITION Support Technician cleaned up during 1 hour about 15 secret hidden Adobe files in the Windows XP System.
    After this clean up the AUDITION program functionned ONCE! Once it was able to output a Final Mixdown with sound in it.
    That never occured again after. I have a very standard very well maintained Windows XP computer.
    My understanding & the experience with the Adobe Support Technician prooves that the problem is the deeply hidden spy files of Adobe who erroneously turn my bought & registered program into an expired DEMO. I have reported the problem numerous times to Adobe, & everytime I talk to support people at Adobe, they tell me they have never heard about this problem, when I already had reported it MANY times at the Adobe Tech Support department !!!
    I can only draw the conclusion Adobe is trying to hide this problem away by pretending they have never heard about it.. ?
    Anybody have had a similar AUDITION  / DEPRESSION nightmare & found a solution ?

    Astraelia wrote:
    Audition is the first & only program easely accessible for musicians who record themselves without having the expertise of a sound technician handling the recording operations. This is certainly by far, the greatest quality of Audition.
    I would term Audition to be the very first & only recording program (on PC) conceived for musicians. All the others Audio Logic, Q Base ect. are conceived for professionnal recording engineers.
    You seem to have a rather strange conception of Audition, I must say. Most musicians want it to do rather more than it does. It wasn't conceived for musicians at all really - it was originally designed to be just an editor, to which the functions of a multitrack tape recorder were added. Its primary use is professional - always has been, mainly by radio stations. Just about every station in the world has at least one copy, and some larger ones like the BBC have rather a lot more... and I'd say that it was the likes of Cubase and Logic that are conceived for musicians, not Audition. It's also used by a lot of Mastering studios, even though they won't admit it. The primary reason for it being in Adobe's Creative Suite is because it's getting more and more integrated with the video programs in it - nothing to do with music at all.
    I'm afraid that whether you like it or not, Audition is marketed towards people who do know what they're doing, by and large. That's why it behaves the way it does, and why you do really need to be at least a bit of a technician to use it effectively. And I'm still trying to think whether I know of any guitarists at all who use amplifiers and who don't understand at least the basics of how a mixer works, but I'm afraid that I can't think of any. I'm not going to say that it's common knowledge, but I don't think it's that rare either.

  • Reg : data is not getting in the output

    hi team,
                 data is not getting in the  output, but it is getting in the debug mode
    REPORT ZSAPP10 .
    *tables : pernr.
    TABLES : PA0001.
    type-pools : slis.
    types : begin of itab,
            pernr type pernr,
            orgeh type orgeh,
            abkrs type abkrs,
            end of itab,
            begin of itab2,
            pernr type pernr,
            vorna type pad_vorna,
            nachn type pad_nachn,
            end of itab2.
    parameter : p_pernr like pa0001-pernr.
    *DATA:  g_cprog  tYPE SY-CPROG.
    data : i_itab1 type table of itab initial size 0,
           i_itab2 type table of itab2 initial size 0.
    data : w_itab type itab,
           w_itab2 type itab2.
    data : t_fieldcat type slis_t_fieldcat_alv,
            w_fieldcat type slis_fieldcat_alv.
    data : t_event type slis_t_event,
            w_event type slis_alv_event.
    data : t_listheader type slis_t_listheader,
           w_listheader type slis_listheader.
    *get pernr.
    w_event-form = 'TOP_OF_PAGE'.
    w_event-form = 'sub1'.
    append w_event to t_event.
    w_listheader-typ = 'H'.
    w_listheader-info = 'this is new top of page'.
    append w_listheader to t_listheader.
    select pernr
           orgeh
           abkrs from pa0001 into table i_itab1 where pernr = p_pernr.
    w_fieldcat-col_pos = 1.
    w_fieldcat-seltext_m = 'personnal no'.
    w_fieldcat-fieldname = 'pernr'.
    w_fieldcat-tabname = 'i_itab1'.
    w_fieldcat-outputlen = '20'.
    append w_fieldcat to t_fieldcat.
    w_fieldcat-col_pos = 2.
    w_fieldcat-seltext_m = 'org. unit'.
    w_fieldcat-tabname = 'i_itab1'.
    w_fieldcat-fieldname = 'orgeh'.
    w_fieldcat-outputlen = '20'.
    append w_fieldcat to t_fieldcat.
    w_fieldcat-col_pos = 3.
    w_fieldcat-seltext_m = 'payroll area'.
    w_fieldcat-tabname = 'i_itab1'.
    w_fieldcat-fieldname = 'abkrs'.
    w_fieldcat-outputlen = '20'.
    append w_fieldcat to t_fieldcat.
    *g_cprog = SY-CPROG.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
               I_INTERFACE_CHECK                 = ' '
               I_BYPASSING_BUFFER                =
               I_BUFFER_ACTIVE                   = ' '
                 I_CALLBACK_PROGRAM                = SY-CPROG
               I_CALLBACK_PF_STATUS_SET          = ' '
               I_CALLBACK_USER_COMMAND           = ' '
               I_CALLBACK_TOP_OF_PAGE            = ' '
               I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
               I_CALLBACK_HTML_END_OF_LIST       = ' '
               I_STRUCTURE_NAME                  =
               I_BACKGROUND_ID                   = ' '
               I_GRID_TITLE                      =
               I_GRID_SETTINGS                   =
               IS_LAYOUT                         =
                 IT_FIELDCAT                       = T_FIELDCAT
               IT_EXCLUDING                      =
               IT_SPECIAL_GROUPS                 =
               IT_SORT                           =
               IT_FILTER                         =
               IS_SEL_HIDE                       =
               I_DEFAULT                         = 'X'
               I_SAVE                            = ' '
               IS_VARIANT                        =
                 IT_EVENTS                         = T_EVENT
               IT_EVENT_EXIT                     =
               IS_PRINT                          =
               IS_REPREP_ID                      =
               I_SCREEN_START_COLUMN             = 0
               I_SCREEN_START_LINE               = 0
               I_SCREEN_END_COLUMN               = 0
               I_SCREEN_END_LINE                 = 0
               IT_ALV_GRAPHICS                   =
               IT_ADD_FIELDCAT                   =
               IT_HYPERLINK                      =
               I_HTML_HEIGHT_TOP                 =
               I_HTML_HEIGHT_END                 =
               IT_EXCEPT_QINFO                   =
             IMPORTING
               E_EXIT_CAUSED_BY_CALLER           =
               ES_EXIT_CAUSED_BY_USER            =
                 TABLES
                 T_OUTTAB                          = I_ITAB1[]
              EXCEPTIONS
                PROGRAM_ERROR                     = 1
                OTHERS                            = 2
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
          FORM sub1                                                     *
    FORM sub1.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
        EXPORTING
          IT_LIST_COMMENTARY       = t_listheader
      I_LOGO                   =
      I_END_OF_LIST_GRID       =
    ENDFORM.                                                    " sub1

    write this way...
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
            EXPORTING
            i_callback_program                = w_repid
            is_layout                = wa_layout
            i_callback_user_command  = 'USER_COMMAND_ACCT'
            i_grid_title             = 'Document Status Report'
             it_fieldcat                       = it_fcat[]
         IT_SORT                        = IT_SORT[]
             it_events                = it_events
             TABLES
               t_outtab                        = it_final_data[]
          EXCEPTIONS
            program_error                     = 1
            OTHERS                            = 2.

  • Added in to fieldcat but do not display in the output

    Dear Experts,
    I meet a problem that I add one recode into the fieldcat.But in output, the field's name do not appear in the output.The following is my code.The content 'Duodate' does not appear on the screen.
    form fieldcat_init using l_fieldcat type slis_t_fieldcat_alv.
      data: ls_fieldcat type slis_fieldcat_alv.
    *head field categories                                       *
      clear ls_fieldcat.
      ls_fieldcat-fieldname = 'LIFNR'.
      ls_fieldcat-tabname   = 'ITAB_HD_IT'.
      ls_fieldcat-seltext_l = 'Vonder'.
      ls_fieldcat-key       = 'X'.
      ls_fieldcat-fix_column     = 'X'.
    ls_fieldcat-outputlen = 12.
      append ls_fieldcat to l_fieldcat.
      clear ls_fieldcat.
      ls_fieldcat-fieldname = 'NAME1'.
      ls_fieldcat-tabname   = 'ITAB_HD_IT'.
      ls_fieldcat-seltext_l = 'Vonder'.
      ls_fieldcat-key       = 'X'.
      ls_fieldcat-fix_column     = 'X'.
      ls_fieldcat-outputlen = 40.
      append ls_fieldcat to l_fieldcat.
      clear ls_fieldcat.
      ls_fieldcat-fieldname = 'VBLNR'.
      ls_fieldcat-tabname   = 'ITAB_HD_IT'.
      ls_fieldcat-seltext_l = 'Payment'.
    ls_fieldcat-outputlen = 10.
      ls_fieldcat-do_sum = 'X'.
      append ls_fieldcat to l_fieldcat.
      clear ls_fieldcat.
      ls_fieldcat-fieldname = 'WAERS'.
      ls_fieldcat-tabname   = 'ITAB_HD_IT'.
      ls_fieldcat-seltext_l = 'CURR.'.
    ls_fieldcat-outputlen = 10.
      ls_fieldcat-do_sum = 'X'.
      append ls_fieldcat to l_fieldcat.
      clear ls_fieldcat.
      ls_fieldcat-fieldname = 'WRBTR'.
      ls_fieldcat-tabname   = 'ITAB_HD_IT'.
      ls_fieldcat-seltext_l = 'Amount'.
      ls_fieldcat-outputlen = 15.
      ls_fieldcat-do_sum = 'X'.
      append ls_fieldcat to l_fieldcat.
    *item field categories                                       *
      clear ls_fieldcat.
      ls_fieldcat-fieldname = 'BELNR'.
      ls_fieldcat-tabname   = 'ITAB_ITEM_IT'.
      ls_fieldcat-seltext_l = 'Docu.'.
      ls_fieldcat-key       = 'X'.
      ls_fieldcat-fix_column     = 'X'.
      ls_fieldcat-outputlen = 12.
      append ls_fieldcat to l_fieldcat.
      clear ls_fieldcat.
      ls_fieldcat-fieldname = 'BLDAT'.
      ls_fieldcat-tabname   = 'ITAB_ITEM_IT'.
      ls_fieldcat-seltext_l = 'Document Date'.
      ls_fieldcat-outputlen = 10.
      ls_fieldcat-key       = 'X'.
      ls_fieldcat-fix_column     = 'X'.
      append ls_fieldcat to l_fieldcat.
      clear ls_fieldcat.
      ls_fieldcat-fieldname = 'ZFBDT'.
      ls_fieldcat-tabname   = 'ITAB_ITEM_IT'.
      ls_fieldcat-seltext_l = 'BasDte'.
      ls_fieldcat-outputlen = 10.
      ls_fieldcat-key       = 'X'.
      ls_fieldcat-fix_column     = 'X'.
      append ls_fieldcat to l_fieldcat.
        clear ls_fieldcat.
      ls_fieldcat-fieldname = 'ZDUED'.
      ls_fieldcat-tabname   = 'ITAB_ITEM-IT'.
      ls_fieldcat-seltext_l = 'DueDate'.
      ls_fieldcat-outputlen = 10.
      append ls_fieldcat to l_fieldcat.
      clear ls_fieldcat.
      ls_fieldcat-fieldname = 'ZTERM'.
      ls_fieldcat-tabname   = 'ITAB_ITEM_IT'.
      ls_fieldcat-seltext_l = 'Cond'.
      ls_fieldcat-outputlen = 4.
      ls_fieldcat-key       = 'X'.
      ls_fieldcat-fix_column     = 'X'.
      append ls_fieldcat to l_fieldcat.
      clear ls_fieldcat.
      ls_fieldcat-fieldname = 'ZPAYT'.
      ls_fieldcat-tabname   = 'ITAB_ITEM_IT'.
      ls_fieldcat-seltext_l = 'Pmnt term'.
      ls_fieldcat-outputlen = 12.
      ls_fieldcat-key       = 'X'.
      ls_fieldcat-fix_column     = 'X'.
      append ls_fieldcat to l_fieldcat.
      clear ls_fieldcat.
      ls_fieldcat-fieldname = 'WAERS'.
      ls_fieldcat-tabname   = 'ITAB_ITEM_IT'.
      ls_fieldcat-seltext_l = 'Currency'.
      ls_fieldcat-outputlen = 4.
      append ls_fieldcat to l_fieldcat.
      clear ls_fieldcat.
      ls_fieldcat-fieldname = 'WRBTR'.
      ls_fieldcat-tabname   = 'ITAB_ITEM_IT'.
      ls_fieldcat-seltext_l = 'Amount'.
      ls_fieldcat-outputlen = 15.
      append ls_fieldcat to l_fieldcat.
    ENDFORM.                    " FIELDCAT_INIT

    hi,
    try this code.
    ls_fieldcat-fieldname = 'LIFNR'.
    ls_fieldcat-seltext_l = 'Vonder'.
      ls_fieldcat-key = 'X'.
      ls_fieldcat-fix_column = 'X'.
       ls_fieldcat-outputlen = 12.
      append ls_fieldcat to l_fieldcat.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
         IT_FIELDCAT                        = l_fieldcat.  " Pass the fielc cat here
    it must work.... and check out thels_fieldcat-fieldname  again.. you have to give the correct fielname in uppercase inside ' '.
    thankyou.

  • Proxy output not displayed in the output XML

    Hi,
    I have created a web service and is calling the service using SOAP UI tool. To do it i have created an RFC Fm and inported to SAP PI and activated it with the input and output parameters that i need. When i am calling the service through the SOAP UI, in debugging( in the provider class of the service interface of the sproxy transaction ) i am able to see the values filled in one of the parameters but the same is not getting displayed in the output XML.(Response). Can any one please suggest what cud be the reason.
    Thanks

    Hi,
    can give us a hint? Code output, screenshot? btw I hope your service is a Synchronous service.
    Thanks Nick.

  • Column not appearing in the output

    Hello All,
    I need to make changes to the existing workbook. "Line amount" (Detail)cloumn needs to be manipulated
    Line amiountwas selected in the list. But in the output i am not able to see that line amount in the output.
    But if select line amount (sum) i am able to see. Line amount(detail) i am not able to see.
    Please let me know the reason for this.
    Kind Regards,
    Kumar.

    That seems strange to me. Perhaps some kind of security thing. Though you would think if you can see the SUM aggreagate, you should be able to see the DETAIL. Can you even see the DETAIL to pick it from the item list (open the item to see its available choices)? Maybe you are not opening the item to see the aggregate choices and just picking the item, and it is giving you the default choice, which would be SUM most likely? If you can see the DETAIL choice and you pick it, but you don't see it in the query results, I would contact Oracle Support. I would say in such a situation that you must have run across a programming error.
    John Dickey

  • Barcode Not Visible in the Output

    Hi,
    I am not able to see the barcode in the output of my concurrent program. I am using a Code 39 Font. ( I have it installed it in my system). This is an Oracle Report (rdf) in 10g version. Our apps is on R12.
    I actually printed a simple BI publisher report which is a portrait to test bar codes and it printed it fine.
    But the new one is a landscape and a totally different report. It just shows the field value in the output though I can see the font applied to the field in rtf.
    Can any one please let me know if I am missing something.
    TIA,
    Neeraja

    Never Mind. I forgot to do font mappings :( (duh!!)

  • Sound - My built speakers do not show in the output section in sound system preferences area only digital out hence unless I connect external speakers I have no sound - can anyone assist?

    on my IMac the internal speakers have ceased working - in the sound preferences area only digital out sound is there no internal speakers to choose so unless I connect external speakers I have no sound

    Hey Jack (woofman jack)
    Sounds like the micro switch inside the output jack that switches the audio from internal to external is stuck on external. Try plugging a set of buds, headphones or digital Toslink adapter in and out a few times to see if it will unstick the micro switch. You also might try jiggling a tooth pick around inside the audio output jack to see if that unsticks it? If not then you'll need to make an appointment at your Local Apple Store or Apple Service Provider and have the jack serviced.
    Dennis

  • 2 structures in the column,structure not displaying in the output(RSRT)

    Hello BI Folks,
               I have a requirement where the user enters the input(text variable)
    say 03/2011 then the report output should be Jan,Feb,Mar.
    say  05/2011 then the output should be Jan,Feb,Mar,Apr,May,likewise.
    The report output should be:(if the text variable is---02/2011)
    Brand          Jan              Feb                     Mar                      April                      May                       June                  July                 Aug             Sept           Oct                Nov           Dec
              Sales Foc Sales Foc  Sales Foc  Sales Foc  Sales Foc  Sales Foc Sales Foc Sales  Foc Sales  Foc Sales  Foc Sales  Foc
      A      455    56     38      
      B                03     32
      C
      D       90      2      75     69
    I am acheievin this by using creating 2 structures in the columns.
    1 structure is for jan-dec & another structure for the KPIs(sales,FOC).
    I am writing customer exit to read the text variable & get the data for the variable read.
    lo_year = sy-datum+0(4).
    lmon =sy-datum+4(2).
    READ TABLE i_t_var_range INTO loc_var_range WITH KEY vnam = 'text_variable'.
    l_s_range-low = loc_var_range-low.
    ln_value = l_s_range-low+4(2).
    DO ln_value TIMES.
      l_counter = l_counter + 1.
      CONCATENATE 'customer_exit_mons' l_counter INTO lv_text.
      CASE i_vnam.
        WHEN lv_text.
          IF i_step = 2.
            CONCATENATE lo_year lmon '01' INTO lv_startdate.
         **  Call a function module to arrive the enddate.
            CALL FUNCTION 'SLS_MISC_GET_LAST_DAY_OF_MONTH'
              EXPORTING
                day_in            = lv_startdate
              IMPORTING
                last_day_of_month = lv_enddate.
            l_s_range-low = lv_startdate.
            l_s_range-high = lv_enddate.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
            APPEND l_s_range TO e_t_range.
            CLEAR l_s_range.
          ENDIF.                                                "End IF
      ENDCASE.                                                  " End Case
      lmon = lmon + 1.
    ENDDO.                                                       " End of Do loop
    CLEAR: ln_value , lv_text .
    The problem is i am not getting the query ouput atleast not the query structure.Is there any other way to achieve this type of output.
    Note:--The text variable wil be based on 0calmonth.
               The custmer exit variables Jan-dec is based on 0calday.
    Edited by: shreyaJ on Nov 18, 2011 11:49 AM

    Hi crazymatts,
    Thanks for ur reply.
    There is no data in the text variable (0CALMONTH).
    But i think the structure atleast gets displayed in the output,am not gettin even that.
    And there is no reference characteristics on the text variable.Its a manual input variable which i will be using in my code.
    Thanks,
    Shreya J.
    Edited by: shreyaJ on Nov 23, 2011 8:12 AM

  • Value mapping is not refflected in the output

    Hi Experts,
    I have used value mapping in PI7.1
    BUT IT IS NOT REFLECTED.
    ID: I have used value group.IR  I have usedin the value mapping.
    please guide me.
    regards
    elton

    Please refer this thread and link. Might help you
    fixed and value mapping
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00ee347e-aabb-2a10-b298-d15a1ebf43c5?quicklink=index&overridelayout=true

  • Query not giving me the output I want

    Hi there,
    I have the following query:
    select rent_no, rent_end, count(*) as "NUMBER OF DRIVERS"
    from rental where (rent_end IS NOT NULL) AND (rent_end between (select to_date(sysdate) from dual) and (select to_date(sysdate-7) from dual))
    group by rent_no, rent_end
    order by rent_end;
    but it's not outputting my desired output. Basically, I want to view the selected columns where the RENT_END value is in the last seven days. So my output is supposed to look something like this:
    RENT_NO RENT_END NUMBER OF DRIVERS
    12345679 07-OCT-09 1
    As you can see, the rent_end value is within the last seven days, but for some reason, it's not outputting at all. can anyone help?

    I have a couple of recommendations:
    select to_date(sysdate) from dualSYSDATE is already a date value, there is no need to use TO_DATE() to convert it to a date. In addition, you can just replace the whole select statement with SYSDATE.
    rent_end between (select to_date(sysdate) from dual) and (select to_date(sysdate-7) from dual)This is probably the main reason why your query is not returning any rows. The BETWEEN is not setup correctly. It should be this:
    BETWEEN <LOWER BOUND> AND <UPPER BOUND>However, you have yours flipped backwards. It should probably be:
    RENT_END BETWEEN TRUNC(SYSDATE) - 7 AND TRUNC(SYSDATE+1) - 1/86400 /* 23:59:59 on the current day */HTH!

  • My devices are not appearing in the output input for sound in system preference the mute is on and i cant uncheck it

    Yesterday I received Mackeeper and I assumed it was from apple. I made the mistake of installing. Then my friend told to get rid of it. I deleted. I shut my computer for the night and today no sound coming from my speakers go to system prefences and its on mute. i try to unclick. howeveer nothing is showing as being in the list for input out . HELP

    In iPhoto menu: iPhoto>Preferences>General. Check the box.

  • Maximum is not populating in the output of bex query

    Hi friends,
    I calculated maximum value of a key figure restricting on char value.
    (Properties -> calculate Result as -> maximum )
    But I am getting summation of maximum.
    for example.
    current-assigne open-cases    max-age-opencases.
    rock--10--
    75
    charle--9--
    80.
    In above scenerio instead of giving max age of open cases it is giving sum of ages.
    Please help guys.
    Thanks,
    James

    Hi Oscar,
    I applied max but still it's giving summation.
    Thanks,
    James.

  • Unified Communications Attendant console: queue does not show in the client

    Hello,
    I have Cisco Unified Attendant Console - Department Edition 9.1.1.10 in conjunction with CUCM 9.1.1.
    My problem is that when I login with the operator account to the client the queue does not show up as expected.
    I have configured the queue, synchronized with CUCM, i can see it in CUCM under device/CTI route point, i have associated the queue to the operator in user configuration queue association.
    but when i login as the opeartor to the client i can not see it.
    any help is apreciated.
    thanks

    Hi,
    This is working correctly, as you can only associated a single queue (department), this is not displayed in the operator console client.
    You only see the queue list in Business, Enterprise or Premium Edition.
    Jamie

  • Can not see Characteristics fields in the output option of VC

    Hello,
    Any body know why is the characteristic fields of a BW query shows only in the input parameter and not shown in the output option when we model BW query in VC?
    Regards,
    Maureen

    Hi Maureen,
    right click on query "Test data service" then excute the query and click on generate.
    Best Regards,
    Marcel

Maybe you are looking for

  • HP Envy Touchsmart 15-J004SA Laptop, intel core i7, 16GB

    Hi, So one evening i was doing my work on my desk the same as every other day and shut my computer down as normal.  I came back to my laptop the next day - which was still untouched in the same position. I open my lid, and find a crack all the way do

  • Photo stream not sync everything

    HI, I have a problem with photo stream. ON Friday, we had some party and all of my pictures I've made on iPhone 6 (latest update) were synced Correctly to photo stream and I could see them on iPad (also latest iOS update). However yesterday, we were

  • Help with tv out

    I bought the DYNEX MP3 player accessory kit that works with the zen. I plugged in the AV cable and plugged it into the tv but it is just a wavy mess and whining sound. What am I doing wrong?

  • Is anyone having volume issues with the new Iphone 4S?

    Is anyone having volume issues with the new Iphone 4S?

  • Question about commond pattern

    Hi! can somebody tell me about any good resource where i can get knowledge of designing controller on basis of command pattern and an example will help me a lot.... I want to develop a controller for my application which except's data from swing clie