VCast Media manager looks for update, then shuts down

I installed the Vcast Media manager app on my Windows 7 laptop this morning.   I installed apple quicktime at the same time and told the VCast install I needed drivers for motorola.   Now when I open the Media Manager it says an update is needed, then immediately opens dialog box that says "Can't download update, shutting down"   I've done the uninstall/reinstall dance.   Any other ideas?
DT

First try a Reset  ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.

Similar Messages

  • I updated my ipod touch, then a while later it said waiting for update then shut off. then started turning on and off, what do i do ?

    I updated my ipod touch, then a while later it said waiting for update then shut off. then started turning on and off, what do i do ?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I have Ipad 2.  When I touch an icon, a box forms around it and then I have to tap it twice to open.  The box is messing up the touch screen and when I go into some apps they open, update then shut down.

    I have an Ipad2.  All of a sudden when I touch an app or select anything, a box forms around the icon or word and then I have to tap it twice to open it.  So everything I do I have to touch 3 times.  Also now when I open some of the apps, they open, update then close down.   How do I get rid of the box. 

    You might have turned VoiceOver 'on'. See if triple-clicking the home button turns it off, and if it does then cahnge what Settings > General > Axxessibility > Triple-Click Hme is set to.
    Otherwise your need to use the 'touch to select, double-tap to activate' process to go into Settings > General > Accessibility > VoiceOver and turn it off.
    The manual (http://support.apple.com/manuals/#ipad) also says that you should be able to switch voice-over off by connecting to your computer's iTunes :
    Turn VoiceOver on or off in iTunes: Select iPad in the iTunes sidebar. In the Options section of the Summary pane, click Configure Universal Access. Select VoiceOver, then click OK.
    So select Configure Universal Access at the bottom of the Summary tab and set Seeing to Neither

  • Adobe creative cloud has stopped working, all my individual programmes from adobe open and work fine, but when I try to open adobe cloud it starts to open then says adobe cloud has stopped working, looking for a solution then shuts down, I can not open it

    Adobe creative cloud has stopped working, all my individual programmes from adobe open and work fine, but when I try to open adobe cloud it starts to open then says adobe cloud has stopped working, looking for a solution then shuts down, I can not open it at all.

    Without proper system information and the application logs nobody can tell you much.
    Troubleshoot Creative Cloud download and install issues
    Mylenium

  • Vcast Media Manager -- where is support for 64-bit windows computers??

    I purchased a Droid 2 in October, when I plug it into my computer it brings up Verizon Vcast Media Manager page to download that program (which is good because I want to get my music onto my phone from my desktop computer).  But only after download attempt does it tell me that said program will only support a 32-bit operating system.  Well, I, my wife, and a lot of other people have a 64-bit operating system.  Is Verizon really that far behind the times?  Seriously has no one noticed this, a 32-bit machine is outdated these days.  Why can i not hook my Droid up to my puter, I thought this was smartphone technology...  Maybe the phone is smarter than Verizons Programmers??   To VZW, please correct me if I am wrong, or fix the problem if I am correct.

    Currently there is no 64bit version available at this time, and no ETA to when one will be available. I would recommend as an alternative using the Droid 2 as a mass storage drive to transfer music. I have included the instruction in an article below:
    http://support.vzw.com/clc/devices/knowledge_base.html?id=34780
    If it still does not recognize it as a device, try putting it in USB debugging mode. Instruction article given below:
    http://support.vzw.com/clc/devices/knowledge_base.html?id=31366
    ***As long as a memory card is present in the device, it will show up as a drive on your personal computer. Once it shows up as a drive, you can drag and drop music and media files on the Droid 2.

  • When I open my newsstand, it only stay open for a second then shuts down.  It started after I updated my software to 6.0. Any suggestions for how to fix this?

    When I open newsstand it only stays open for 1 second then shuts down.  This started happening after I upgraded to 6.0. Any suggestions for how to fix this?

    Try quitting Newsstand completely - double tap home button, delete it from the multitasking shelf - then launch it again.

  • Vcast media manager error

    For some time now, several times a day I get the message "backup+media (process com.vcast media manager) has stopped error."  I looked at application settings but couldn't find anything useful to change.  How do I stop these messages, I don't use vcast! Tilly

    Hello,
    Thank you Community Members for providing a troubleshooting tip. It is very much appreciated.  First, you want to make sure that your system meets the minimum requirements, which can be viewed at the link below:
    VCAST Media Manager Specs
    Next, uninstall the VCAST application and reboot your computer. 
    Then, disable your firewall and antivirus program and download the VCAST Media Manager application again, which can be found at the web link below:
    VCAST Media Manager
    If you are still having trouble with this service, it will be necessary to contact our Technical Support team directly. Please call 1-800-922-0204, option 3, from an alternate phone and be in front of your computer if you need to call.
    Thank you.
    KellyW@VZWSupport

  • Vcast media manager issue

    I downloaded the Vcast media manager for my XP desktop and was able to get songs loaded. But now when I start the program it says there is an update but it fails to download it and then Vcast closes.
    I unloaded Vcast and downloaded the latest version but it still shows the same problem.
    Any one else see this or know the solution?

    I would call customer service and see if they can see an issue on their end...and at least make a note that you never received the download.

  • Error message when trying to use vcast media manager

    I recently downloaded the VCast Media Manager but have been unable to transfer any media from my computer or from my Thunderbolt. I tried signing in to VCast Media Manager on my phone and received an error message:
    Server Problem
    Abnormal situation code: err_conn/ont-api-vip.newbay.com
    Unsure where to go from here. Thanks for any suggestions.

    Hello,
    Thank you Community Members for providing a troubleshooting tip. It is very much appreciated.  First, you want to make sure that your system meets the minimum requirements, which can be viewed at the link below:
    VCAST Media Manager Specs
    Next, uninstall the VCAST application and reboot your computer. 
    Then, disable your firewall and antivirus program and download the VCAST Media Manager application again, which can be found at the web link below:
    VCAST Media Manager
    If you are still having trouble with this service, it will be necessary to contact our Technical Support team directly. Please call 1-800-922-0204, option 3, from an alternate phone and be in front of your computer if you need to call.
    Thank you.
    KellyW@VZWSupport

  • VCAST Media Manager and ENV 3

    OK, I always used the desktop Media manager to get my pictures off my phone, now I have a new computer and it doesn't work.  I tried reinstalling it many times (yes I have the device drivers) and it no longer brings up my phone in order for me to transfer my photos.  It shows FB, and all other options to transfer but note my phone which used to show up right away once I plugged it in.  I am unsing windows 7 but I also tired doing it on my XP machine but still it does not recognize my phone after I connect it, help!  I have all these pics on my phone that I can't get to my pc.

    I always used the desktop Media manager to get my pictures off my phone, now I have a new computer and it doesn't work.  I tried reinstalling it many times (yes I have the device drivers) and it no longer brings up my phone in order for me to transfer my photos.  It shows FB, and all other options to transfer but note my phone which used to show up right away once I plugged it in.  I am using windows 7 but I also tired doing it on my XP machine but still it does not recognize my phone after I connect it, help!  I have all these pics on my phone that I can't get to my pc.
    VCAST Media Manager and ENV 3
    Options  
    06-22-2011 10:10 AM
    Goldie11 wrote:
    OK, I always used the desktop Media manager to get my pictures off my phone, now I have a new computer and it doesn't work.  I tried reinstalling it many times (yes I have the device drivers) and it no longer brings up my phone in order for me to transfer my photos.  It shows FB, and all other options to transfer but note my phone which used to show up right away once I plugged it in.  I am unsing windows 7 but I also tired doing it on my XP machine but still it does not recognize my phone after I connect it, help!  I have all these pics on my phone that I can't get to my pc.
    Thank you Goldie11 for your reply. Adding to what was said, I wish to point out that you double posted on the same issue a minute of each other putting the word Ok at the start of your sentence as the only difference between the posts. The reason why this was pointed out is because one posting would be sufficient.  Many postings of the same issue exact issue does not get more attention than a single posting where as a double posting can cause confusion. In stating you always have used a desktop Media manager to get my pictures off your phone, What Windows operating system were you using at that time it worked to get the pictures off your device? Please check to see if you enabled the menu for Mass Storage on your device. 
    The USB Mass Storage menu allows you to transfer content from your phone via Windows XP when your phone is connected to your computer using a Micro Sd card inserted in your phone and with a compatible USB cable. When you have the Micro Sd card inserted in your phone, use the steps below to enable the menu for Mass Storage. I am also providing a link to  our website that can also provide additional troubleshooting steps. The link is:  http://support.vzw.com/clc/devices/index.html
    Using the Internal Keypad:
    1. Open the flip and press[MENU].
    2. Press Settings & Tools.
    3. Press Tools.
    4. Press USB Mass Storage. From there you can enable the Mass Storage to then transfer your pictures from the phone to your computer.
    Please note: Do not insert or remove the Micro Sd card while playing,deleting or downloading Pictures/Videos/Music/Sounds.

  • Vcast Media Manager Software

    Im running windows 7 (64 bit) Vcast Media Manager Software will only run on 32 bit OS, does anyone have any solutions  so that it will run on 64 bit OS? Appreciate any help on this matter. thanks:

    64bit computing has been standard for almost 1/2 a year now.  I am not talking about high end machines either. Even cheap, low end machines have come standard with 64bit versions of Windows 7 (under $400).  
    Please Verizon, get a 64bit version out ASAP.  
    46 percent of all computers running Windows 7 are using the 64-bit edition
    Until then, everyone who is running x64 machines use dazzboard (beta) or DoubleTwist.
    From a buisness standpoint, I see the lack of x64 support as being a loss in potential revenue that could have been gained from customers purchasing media driectly from the V CAST Media Manager.

  • Vcast Media Manager won't give iTunes node

    Just installed VCast Media Manager, version 1.1 (build 11). I'm running iTunes 10.1.1.4.  I'm running Windows XP on a netbook.
    When I launch VMM, it shows Windows Media Player as a node on the left side, but  not iTunes.
    It scanned and found all of the music files in my iTunes folders, but it doesn't show it as a node and let me manage the playlists.
    What am I doing wrong?

    I don't have a PC support to contact, and if I did, why would they know anything about VMM software?
    What is VMM looking for, in order to recognize iTunes as a node in the VMM software?
    What, for instance, does it "see" in order to recognize Windows Media Player?
    Is there a particular registry value?
    A service that should be running?
    Are there settings in iTunes that should be configured a certain way for VMM?

  • VCast Media Manager - Upload Button

    So I ordered VCast Media Manager so I don't need to bring a cable with me everywhere and so I can store files remotely and access them with my phone automatically when I need them...great and fun.
    I ordered the server, configured the service, and ended up on the VCast Media Manager page.  It's a simple page that has a simple set of instructions on the page.  The instruction states to start uploading content by pressing the "Upload" button.   So I look everywhere on the page for an "Upload" button.  Can't find it.  I do a browser find, still no go.  Look at the source and do find/upload, no control with that name.  Hmm...how do I upload files to VCast Media Manager without the Upload button that we are instructed to use?

    I would call customer service and see if they can see an issue on their end...and at least make a note that you never received the download.

  • VM2.2 manager page shows wrong status "Shutting down" for VM Guest

    Hi,
    VM manager page shows wrong status "Shutting down" for VM guest, I can very much connect to console and see it is up and running.
    It happened when trying to shutdown VM guest manually but in parallel VM server got rebooted automatically.
    Any information on How to correct the status in VM manager page?
    Thank you.

    I found below this solution on http://download.oracle.com/docs/cd/E15458_01/doc.22/e15441/appendix_e.htm#BHBCIAJB
    To solve this problem, change the status manually as follows:
    1.Make sure that the virtual machine in the target server has been shut down. Use xm list or virsh list to check the virtual machine name and ID.
    2.If the virtual machine is running, use xm shutdown vm_id or virsh shutdown vm_id to shut it down, where vm_id refers to the virtual machine name or ID.
    3.Use xm list or virsh list to check if the virtual machine has been shut down. If it is still running, use xm destroy vm_id, or virsh destroy vm_id to shut it down.
    4.Log in as oracle (or root first, then su - oracle) to the computer where Oracle VM Manager is installed, and run the following commands to change the virtual machine status to Powered off in the Oracle XE database:
    export ORACLE_HOME='/usr/lib/oracle/xe/app/oracle/product/10.2.0/server'
    export ORACLE_SID=XE
    $ORACLE_HOME/bin/sqlplus / as sysdba
    SQL> update ovs.ovs_vm_img t set t.status='Powered Off' where t.img_name like 'vm_name';
    SQL> commit;
    SQL> quit
    vm_name refers to the virtual machine name.
    5.Retry your operation, or delete the virtual machine directly.

  • I'm having problems with my app, plants vs. zombies 2. It'll open and stay open for a few seconds then shut down. Help please.

    I'm having problems with my app, plants vs. zombies 2. It'll open and stay open for a few seconds then shut down. Help please.

    Check to see if there are Updates available... If already up to date...
    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...

Maybe you are looking for

  • Color Correction for DVD and online

    I have a 13" SD TV hooked up to my mac working as a color correction monitor for FCE. My question is: Should I always color correct using the TV monitor vs looking at the Canvas in FCE? What I'm seeing is the picture in the canvas is darker and more

  • Exception while retrieving deleted document using metadata based query

    Hi, I am using dbxml 2.4.11 on Mac OS 10.5. My xml documents are stored in the dbxml with some metadata. Index on metadata is built. After delete a document I get an exception (error code is DATABASE_ERROR) while trying to use metadata based query: c

  • User Text in Out put of report

    Hi.. I need to show some remark text in output of the report. User will enter at the runtime of the querry...that shoul be display in bottom of the querry ... Can any one please through lite.......... Thanks, Chinna

  • Indesign CS3 hexadecimal file signature?

    I just experienced a hard drive crash and I'm now running a file recovery software to see if I can recover myIindesign files. The software (Ontrack EasyRecovery) doesn't have Indesign listed within its file types. In order to add Indesign, it's reque

  • How delet and replicate a vendor in SRM.

    Hi, Can any one help me whether a vendors BP number can be deleted using FM: BBP_BUPA_EVENT_DELE2 Actually I have updated the currency of my Vendor master record in the back end I want that to be replicated in SRM. only for a single vendor. Is there