Vendor account group assign to Reconciliation account

Hello Experts,
Is it possible to customize a reconciliation account assignment to vendor account group?
Our requirement is when you create a vendor, then select a vendor account group, the reconciliation account will automatically be proposed in the field. This is to avoid selecting wrong reconciliation account when creating a vendor.
I had a look in SPRO but I couldn't find anything that could do that.
Thanks in advance
Regards,
Catherine

Thanks for your inputs,
I have checked in the system if there is a user_exit. Could you please confirm me that the user_exit "GLPLAN00 - Enhanced authorization and master data validation" is the good one?
My objective is to have the correct reconciliation account automatically populated when I am creating a customer/vendor with a specific account group.
e.g. select account group - XXXX Non-trade customer / Reconciliation acct XXXXXX non trade customer automatically populated.
Thanks in advance for your help.
Catherine

Similar Messages

Accounts group assignment in partner determination

Hi SAP experts...
In our scenario our clients customer has different partners like sold to party, ship to party, bill to parpty and payer. so as to configure in partner determination procedure shall we need to go for different account groups for each partner??. What happen if we choose one account group?. Account group has number range assignment, if we go for different account groups then diff.number ranges will be there for each partner of the customer...right...
Can any one clarify and tell the procedure if we go for different account groups.
Points assured for helpful answer.
Sunanda.P

Sunanda,
In VOPA transaction code, you create a partner determination procedure. Here you specify the partner functions to be used & also mark the mandatory partner functions.
This partner determination procedure is then assigned to the account group. Basically the standard account group for "sold to party - 0001" has all partner functions "SP", "SH", "BP" & "PY". Your requirement demands separate partne functions for SP, SH, BP & PY.
So you will have to create 4 different partner determination procedures in VOPA.
ZSOL - SP
ZSHI - SH
ZBIL - BP
ZPAY - PY
Create similar acount groups ZSOL, ZSHI, ZBIL & ZPAY in transaction code OBD2 & do the appropriate field selection for them.
Now assign the partner determination procedures to the account groups in VOPA.
ZSOL = ZSOL
ZSHI = ZSHI
ZBIL = ZBIL
ZPAY = ZPAY
Also assign the individual partner functions as mentioned below:
ZSOL = SP, SH, BP, PY
ZSHI = SH
ZBIL = BP
ZPAY = PY
For ZSOL we assigned all partner functions because, when you will create a sold to party customer, you also have to specify who will the ship to party, bill to party & payer customers for the sold to party.
Now if you want you can assign the same number range to all account groups (assign a single person to create the customer master. So whenever a new customer is created, the partners will be created in line which will be very helpful)
Assume the number range is "0000010000 to 0000099999"
Create SP for 10000
Create SH for 10001
Create BP for 10002
Create PY for 10003
Go to XD02 - select the customer 10000 - go to sales area data - partner functions.
Here in the "PF" column enter SH & in number enter 10001
Here in the "PF" column enter BP & in number enter 10002
Here in the "PF" column enter PY & in number enter 10003
So you have assigned the relevant partners to the sold to party.
Hope this clarifies your doubt.
With best regards,
Allabaqsh G. Patil.

Vendor Account group assign recon. account

Hi Experts,
I'm looking tcode to assing recon. account for vendor account group. I created Vendor account group and recon. account. I would like to have in tcode fk01 assing Vendor account group to recon. account.
Now in tcode fk01 I choose vendor account group and I must type recon account. Could you explain me how it's works automatic.
Thanks

Hmmmm
But this what you say is hand works yes? I would like create something like Variant of tcode for Vendor account group.
Maybe my explains wasn't good.
I would like to have:
Print tcode FK01
now Print company code and Vendor account group
Now I would like to have fill this field recon account - automatic. I don't want fill this field by hand.
Maybe now it's clear.

Assigning Asset Reconciliation Account

Hi Guys,
Where do we assign the Asset Reconciliation Account to an Asset?
Does it flow from the Asset Class? IF so..Where do we assign this GL account..
Thanks,
Kris..

Hi,
Asset reconcillation account is determined based on the accoun determination assigned to the asset class and baed on the account determinaton the reconcillation account is being identified

Account group assignment in Webclient UI

Hello,
I want to assign an account group to an existing corporate account for R/3 integration.
In SAP GUI I can do this in transaction BP on the Classification tab (BUPA_CRMD02-ACCOUNT_GROUP).
I'm not able to find the corresponding field in the Webclient UI. Can you please tell me the
Component and View for this?
Kind regards,
Johan Wigert

Hello Johann,
please take care of the following additional information:
When creating an account with the proper roles, e.g. sold-to-party,
in the CRM Webclient UI there should be automatically a classification
be maintained in the background for this partner.
When this partner with this classification reaches the ERP system the
settings in transaction PIDE are automatically mapping the
classification to the account groups you maintained there.
The account group field in CRM itself is only there if you want to
manually overrule this determination set up in transaction PIDE on
ERP side. This is not a often used scenario, so the respective field
was not put on the SAP delivery configuration for accounts in the new
UI.
However you can easily add it yourself in the view configurations,
e.g. in view BP_HEAD/AccountDetails it can be found under the name
'Account group', technical name '//MARKETING/STRUCT.ACCOUNT_GROUP'.
During the time of download of the customer master record in the trx.
PIDE the determination of the classification takes place. In case the
classification is 'B' (customer) then the role is defaulted to
CRM000(sold-to-party). In case you want to create the BPs in different
role then you may follow the instructions in the note 914437.
Regards, Gerhard

Account Group - Creation of Customer Account

Hi Gurus,
I am having a doubt over the Customer account group.
We have created 8 Customer account group as well in FI.
In IS-H module, we created 2 Customer account group ( Namely,Inpatient and Outpatient)
But as per FI they need to deduct diff payment terms ,dunninig letter,and taxes are deducting under these 8 groups are in FI.
How can we adjust all the 8 groups in FI under the 2 Groups in ISH.?
Can any one gide me?
Thanks.
Bala

2 Process & Configuration
2.1 Customer Master
2.1.1 Account Group
2.1.1.1 Maintain Number Range for Account Group
Use
The purpose of this activity is to control number range of Account Group.
Procedure
Access the activity using one of the following navigation options:
IMG --> Financial Accounting (New) --> Accounts Receivable and Accounts Payable --> Customer Accounts --> Master Data --> Preparations for Creating Customer Master Data --> Create Number Ranges for Customer Accounts --> Select the Icon to maintain Number Range
Transaction Code: SPRO
Data to be maintained:
No | From | To | Current No | Ext (Tick in Check Box)
01 | 0000000001 | 0000099999 | 0 | No
02 | 0000100000 | 0000299999 | 0 | No
XX | A | ZZZZZZZZZZ | Yes
2.1.1.2 Assign Number Range to Account Group
Use
The purpose of this activity is to maintain number range of Account Group.
Procedure
Access the activity using one of the following navigation options:
IMG > Financial Accounting (New) > Accounts Receivable and Accounts Payable > Customer Accounts > Master Data > Preparations for Creating Customer Master Data > Assign Number Ranges to Customer Account Groups
Transaction Code : SPRO
Data to be maintained:
Group | Name | Number Range
0001 | Sold-to party | XX
0002 | Goods recipient | XX
0003 | Payer | XX
0004 | Bill-to party | XX
2.1.1.3 Define Account Groups with Screen Layout (Customers)
Use
In this step, you determine the account group of the customer.
Procedure
Access the activity using one of the following navigation options:
IMG > Financial Accounting (New) > Accounts Receivable and Accounts Payable > Customer Accounts > Master Data > Preparations for Creating Customer Master Data > Define Account Groups with Screen Layout (Customers)
Transaction Code : SPRO
The groups indicated below are a few examples. There are many groups in Standard SAP & if we require additional Group, it can be copied from appropriate group & maintained.
Group | Name
0001 | Sold-to party
0002 | Goods recipient
0003 | Payer
0004 | Bill-to party
0005 | Prospective customer
0006 | Competitor
Select Sold-to-party > go to Details > Double Click on General data / Company code data / Sales data. It will take to next screen which details Tab Pages of General data / Company code data / Sales data. Double Click on Tab Page for example: Address, Control, Marketing & so on. Here you can maintain whether the field is to be Suppress, Req. Entry, Opt. entry or Display
Regards,
Rajesh Banka

Account groups in Chart of account

Hello guys....
When I tried to define the revenue account in FS00 it is throwing a message saying...
" The account groups are not defined in chart of accout XXXX "
So, How to define the account groups in a chart of account?
Thanx in advance.
regards
vamshi

hi
If you feel this answer solve your query please reward with points.
for this check your company code data in oby6 in this the chart of account what you defined in obd4 assigned that number range or not.
obd4=img> financial accounting>masterdata> GL accounting>preparition> define account group.
Do this if you create your range in this follwoing area it will allow you to create whatever the revenue account you want to create.
in fs00. in specified chart of accounts.
Thanks & Regards

Change Normal account (having balances) to Reconciliation Account

Hi,
Clinet want to change the normal GL account ("27500000" which has alredy using for normal transaction and posted balance amount are exist in the system) to Reconciliation account. How It is possible?
It must has zero balance to change the gl to recon gl account.
Thank you to check the new thread.
Regards
partha

You can use for this:
(SE38) RFSEPA02 Switch On Open Item Management by Changing Master Record.
You have to make a new version so that you can run this. This is not working for new G/L. Have a look to the SAP note. You get this number when you run the program.
Don't foget to test first the results in a test system! There are risks
Paul

Account is not a reconciliation account for FI-CA

Hi Experts,
During invoicing we are getting the following error:
Account 1000 xxxxxxxx is not a reconciliation account for FI-CA
Message no. >0229
Diagnosis
G/L account xxxxxxxx in company code 1000 is not classified in the master record as a reconciliation account for account type 'V'. You can only use accounts of this type for business partner items.
System Response
Error message: the posting cannot be generated.
Procedure
If the account number specified is correct, change the account master record so that the account can be used as a reconciliation account for account type 'V'.
If you do not want to use the account number specified, correct automatic account determination for receivables accounts in contract accounts receivable and payable (FI-CA).
Please suugest me the required solution for this.
thanks and regards
Deepak Rana.

Hello,
You need to attach Recon account <Type : Contract Account Receivable & Payable> in EK01 for the MT = 0100/0200/0300.
Or Alternatively you can change the existing GL account to Recon account in FS00 as suggested by Cris. But if you already have balance in the aforesaid GL Account in FI, you cannot change it.
Hope this helps
Rgds
Rajendra

Imap accounts - group message to diff accounts show read

My client works in a department where they have everyone's imap account seen by others so they don't have to log in and out all the time.
Since Mavericks when a group email is sent, one person reading the email will make it read for all other accounts. No very useful. I can't think of another way around it.
I've logged feedback with Apple.
Thanks

I am having the same problem. My gmail IMAP account no longer works and mail crashes nearly everytime I open it. This 1.1.3 update is not very stable and I am very dissapointed. Does anyone have a fix for this??

GL accounts incorrectly marked as reconciliation accounts.

Hi All,
We have a few accounts in test environment that are incorrectly marked as recon accounts. These accounts are supposed to get manual postings which is not possibe. I am thinking about the options: 1) Reverese the postings? 2) Any program that allows you to automactically reset recon account field so that mass changes can be made to many accounts?
Appreciate your inputs!

Dear Vj,
Please try to make the balance to zero for all currency existed in this account of your Company code.
you could check it in FS10N via document currency button. If the balance is zero, then the Master data of this account can be changed.
Addition,in case, you meet any error message, please try to change this message's status to warning or
information message.
For the functionality of changing the account master data massly, I feel very regret that as far as I know
there is not standard functionality existed unless create a little ABAP PRG by yourself.
With Best Regards,
Gladys Xing

Difference between "account group" and "reconciliation account"

Hello,
I am new to SAP and I would like to understand the difference between the "account group" and the "reconciliation account" that appear both in the vendor master records.
From what I read, "account group" is just a classification but has no "accounting" impact whereas "reconciliation account" (goods suppliers, overhead expenses suppliers...) do have an accounting impact.
However I am not sure so I would like a confirmation on that and if possible examples so I could really understand.
Thank you.

Hi,
The account group is a way to divide vendors into groups for reporting later on.
The account group is also the link to the number range and the field selection functionality.
Please refer the below link for more clarity.
http://help.sap.com/saphelp_46c/helpdata/en/53/c98647ca3711d2b494006094b9114a/frameset.htm
Account group
The reconciliation account is the account is the account which is posted to at invoice receipt stage where the vendor account represents the sub ledger and the reconcilation account the ledger.
Reconciliation Account
http://sapdocs.info/sap/fico/reconciliation-accounts-and-special-gl-indicator/
Hope it helps you.
Thanks.

Reconciliation Account in Vendor/Customer Master

What is the function of reconciliation account in Vendor/Customer Master?
Regards
Kailash

Hi
The reconciliation account in the master record records all postings made to a subsidiary ledger.When you post items to a subsidiary ledger, the SAP system automatically posts the same data to the general ledger at the same time. Each subsidiary ledger has one or more reconciliation accounts in the general ledger. These reconciliation accounts ensure that the balance of G/L accounts is always zero. This means that you can draw up financial statements at any time without having to transfer totals from the subledgers to the general ledger.
You can use the reconciliation accounts to make settings:
You can use the reconciliation account to configure the screens for posting items to customer or vendor accounts. Using the reconciliation account you could, for example, suppress the fields for entering exchange rate hedges if these types of transaction are not made.
You can also use the reconciliation account to specify which currencies you can use when posting to the corresponding customer or vendor accounts.
You usually enter the local currency in the master record. Postings can then be made in all currencies to the customer and vendor accounts that the reconciliation account is assigned to. However, you can also enter a foreign currency key in the master record of the reconciliation account. If you do this, you can only post to the relevant customer and vendor accounts in the foreign currency specified.
Thanks & Regards
Sanil K Bhandari

Changing Vendor Account group

If the account group was set up incorrectly and did not get noticed until there was master data against the account- what can be done to correct the situation?
Thanks
raj

Hello Rajendra,
You wanted to know what to do so I replied accordingly.
btw, the Account groups determine:
- The type of number assignment (So if the new account group has the same number then I dont think it will impact),
- A number range for assigning account numbers
- Which fields are displayed and whether their entry is optional or required (field status) when you enter or change vendor master data (You need to take care for manatory field for new account group).
- Whether the account is for one-time vendors (I dont think it will get affect)
Rest of the thing will be fine.
Try to change it and see if it throws error for any data inconsistancy.
Hope this helps.
Regards
Arif Mansuri

Vendor Account Group & Range Vendor Codes

Hi, The users want to know as to how can we determine the Account Group to which the particular Vendor belongs. Is there a report that would give the Vendor Account Group assigned to a particular Vendor Master?
Also how can we know the range that has been defined to the Vendor Masters - i.e. automatic coding or manual coding.
Your help would be highly appreciated.
Thanks in advance.
Regards

Hi,
You can see the info about AcctGroup in LFA1 table (SE16N transaction or build a SQVI for this). The number ranges are stored in NRIV table (KREDITOR object name). In the table T077K you can see the assignment of AcctGroup to a number range. Thus, combinig this info in a simple query, you can build a report.
Regards,
Eli

Vendor account group assign to Reconciliation account

Similar Messages

Maybe you are looking for