Vendor Dowm Payment

Hi,
I got an error message during posting Vendor down payment in F-48:
" Balancing field "Profit Center" in line item 003 not filled. The field Profit Center marked as balancing is not filled with any value in line item 003, even after document splitting. "
I'm using vendor down payment using VAT code.
I think it's related to document splitting customizing.
Can someone help me on this ?
Thanks

A simple example would like this,
31 Vendor 10000
40 expense g/l a/c 5000 x1(x1 iscost center , profit center in x1 is x)
40 expense g/l a/c 2000 x2(x2 is cost center , profit center in x2 is x)
40 expense g/l a/c 3000 x3(x3 is cost center , profit center in x3 is x)
Caio
Raghu

Similar Messages

  • Vendor Down Payment Clearing: F-54 or F-44

    Hi
    I have made a down payment (with Spl. GL indicator) to a vendor, using F-48. Then I book an invoice using FB60. I kept the two amounts same and ignored WT to keep things simple.
    Now i want to clear the down payment against the invoice. I use F-54. The clearing transaction is getting posted. However, the Invoice is lying open (credit entry) along with the Clearing document (debit entry). On the other hand the down payment document (debit) is getting cleared with the Clearing document (credit entry). This means I have two open line items and two cleared line items. I can clear the two open items again using F-44.
    I have two questions:
    1. What is the use of F-54 here since I have to use F-44 eventually?
    2. While doing F-54, Posting Key for the debit line item is 26 : Payment Difference. This is could not understand.
    Can anyone please help me out on this?
    Thanks in advance
    Aninda

    Dear Aninda ,
    I will explain you with following example.
    Recon account(Vendor)---3000000
    Advance to Vendor----
    4005000
    Exp a/c----
    7575100
    Bank a/c----
    5000100
    1. Advance to Vendor (spl gl -A)(F-48)
    Vendor a/c    (SPL-A)( GL- 4005000)        DR   1000
                      T0  Bank a/c (GL-5000100)                  1000
    2. Invoice posting
    Expenditure a/c ( GL-7575100) Dr      1000
         To  Vendor Account(GL-3000000)     1000
    3. Clear Vendor Down Payment (F-54)     
    Vendor  a/c (GL-3000000) DR                1000 (Posting key-26)
         To Vendor a/c (SPL-A)( GL- 4005000)          1000
    It means  Credited spl GL-A has converted from advance to Normal open item. Amount has been transferred from Advance to Vendor GL to Normal Recon account.By this way Advance account shows Nil  Balance with debit(F-48) and Credit (F-54)
    The remaining 2 line items i.e., Credit (F-43) and Debit (F-54) shows as open items. In the next step we need to knock off those line items by manual clearing or automatic clearing.
    4. Normal Clearing (F-44)
    It will be posted without line items.
    I hope i am able to help you out to understand process

  • Vendor duplicate payment-Report

    Dear Guru
       I have an requirement to develop a report that can tell about vendor duplicate payment considering Partial payment and residual payment and full payment.Is there any standard report available ? O r I have to develop a new Custom report.If Custom report that how can i do this ?

    Hi,
    Standared report available to get Partial/Residual/full payment details T.Code: FBL1N
    I think it is not satisfy your requirement, better to develop customized report by using tables BSIK,BSAK,BKPF
    Regards
    Viswa

  • Vendor wise payment report

    Dear Experts,
    I need to have a report that shows all the details of vendor wise payment reports is there any specific transaction codes to resolve this issue
    Regards,
    Ramakrishnan. S

    Hi
    The simplest I Could think of is FBL1N itself with cleared Items. You can always subtotal on Vendor No and Payment Document type. There are other std reports like S_ALR_87012085, S_P99_41000099. It also depends on what kind of information you want from the payment report
    Regards
    Sanil Bhandari

  • Vendor down payment request over PO value

    Hi All,
    I have a requirement for vendor down payment request amount compare to PO value checking.
    I have PO with total value - 600 USD.
    When I create down payment request using F-47, I input amount 1000 USD.
    The system never show me any message.
    I want the SAP to block me from posting down payment request over PO value.
    I've read in the forum, to change message type F5373 with error type. But the message never appear in my F-47 screen.
    Anyone can help me, what am I missing here ?
    Thanks,

    Hi,
    You are right about message F5 373. But this is applicable at the time of the Payment of the Advance i.e. F-48. It is not available at the time of creating the Advance Payment Request against T Code F-47.
    If you want to have this control in the Payment Request, then you will have to use the validation, which you can put with the help of your abaper.
    Regards,
    Amit

  • Vendor Down Payment issue

    Dear Expert
                While doing F-48 Vendor Down Payment am getting below Error
    Customer 450822 is not defined in company code 1000
    Message no. F5102
    Diagnosis
    No master record was created in company code "1000" for customer number "450822".
    System Response
    System error.
    Procedure
    Maintain the customer master record "450822" in company code "1000" or correct the account number.
    Regards
    Ajeesh.s

    Hi ,
    Instead of typed Vendor number can you please do F4 and then look for vendor in Comapny code 1000 . I know its sound bit  strange but I would like to check this  .
    Can you Please check in OBYR for Special GL indictor A and check the reconciliation account for your Chart of account . It may be posible that you have assigned customer reconciliation instead of vendor

  • Vendor down payment request Error

    Hi all,
            i created a vendor down payment request using f-47. I had created a tax code for the country "AE" using FXTP. But when in the vendor down payment request it is not picking the tax code,giving the error "Tax code AN for country AE has been deleted or incorrectly changed", Message no. FS201
    Kindly help me,
    Thanks in advance
    Ani Varghese

    Hi,
    The reason behind this error is that the TAX CODE IS NOT CORRECTLY MAINTAINED.
    You might not have maintained the GL Accounts for this. Maintained it in OB40.
    Regards,
    Amit

  • Vendor down payment

    Hi,
    is it possible to pay vendor down payment with F-58 (not F-48) after dowing a request by F-47 ?
    what is the consequences of that, and what is the procedure that i must follow  ?
    i hope your help
    regards

    <b>I will explain with one example:</b>
    1 You have made a down payment of USD 10000 through F-48.
    2 You have received first invoice for USD 3000. First u have to match (clear) against your down payment using F-54. The balance will become now USD 7000.
    3 You are again posting another invoice for USD 5000.
    4 Carry out the step in 2 and the balance will be now USD 2000.
    5 Now you are posting another invoice for USD 5000.
    6 After clearing thorugh F-54 u will have a balance amount payable to the vendor will USD 3000.
    7 Now you can pay this amount either theorugh automatic payment program or thorugh F-58 to pay this amount. Hope this is clear to you now.

  • Vendor Down payment request

    Hi,
    I have 2 queries regarding vendor down payment request F-47
    1) Want to create DPR on header level (We have ECC.6 No enhancement package)
    2) When I create DPR on item level of more then item value it will stop me & show error but when ever I will create multiple request of same line item with actual amount or less amount (but more then actual amount in total) will be not stop me.
    I already active F5 373  message into error.
    Thanks,
    Farrukh khan

    Hi,
    You are getting this error becausea either you have giving more amount than the PO value or GRN and IV has already been created for this item.
    You are requested to do create DPR as per below given screen shots
    Press Enter
    Click on
    Hope, this solves your issue.
    Regards,
    Tejas

  • F-48 (post vendor down payment:header data)

    Hi Experts,
    Good Evening to you,
    when i was posting F-48 (post vendor down payment:header data) i was getting an error of No Special G/L acct defined for acct type K sp. G/L ind B recon.acct so at that time i went to OBYR and given in Acct type-K SGL Ind-B in that given Recon account and Special GL Account both the numbers but still the erroring is coming. Later i went to FS00 and checked in Control Data that the GL Account the reconciliation account-vendor is already given but still the error is coming.
    So if anybody faced the same error means let me know.
    Awaiting for your golden replies & points will be assign for useful answers.
    Thanks & Best Regards,
    KK

    Hi Rams,
    The problem of "No Special G/L acct defined for acct type K ....." has been rectified when i specify the Special GL A/c in OBYR.
    Now the issue is i gave a wrong Sp GL account in OBYR and posted a document later i recongnise that i gave wrong SP GL and went back to OBYR and gave the correct SP GL A/c number. So there was a posting has done earlier 1 document so can you tellme how to change from Old Sp GL  to New Sp GL.
    Awaiting for your golden reply.
    thanks & best regards,
    KK.

  • F-48 & F-47 Vendor Down payment

    Hi Experts,
    We are in need to add purchase order in vendor down payment requests and in vendor down payment. Purchase order field needs to add as mandatory field.
    Please advise how to add PO field as mandatory in  vendor down payment requests and in vendor down payment.
    Thanks & Regards,
    Kuldeep Dubey

    Hi Kuldeep,
    There are below three ways out of which you have to take decision which one best suits for you...
    1. Make field madatory for Field Status Group in GL Account.
    For this you must have FSG assigned to GL which is very unique then only it will serve purpose otherwise PO field will be madatory for all the GL accounts to which this FSG is attached.
    2. Make field madatory for the posting key 29.
    This will make PO field mandatory for other special Gl transactions also for vendors. For example if you give travel advance to your employee where no PO is required but system will madate you.
    3. Set up Validation in GGB0.
    This might be the best available option since it can be specific to Transaction Codes only.
    Analyse your system and impact of implementing any of the above and take a decision.
    Regards,
    Chintan Joshi

  • Vendor Down Payment Request on WBS (F-47)

    Dear Fellows:
    I have came across a problem that while creating a Vendor Down Payment request (T.code: F-47) on WBS, my system is not stoping me over budget exhaust. I have Budget of 100  and i create request for 101, system allows it and post the document.
    Vice Versa if i create a Vendor Down Payment request over Commitment iten, then system check the budget and generates message.
    any good solution to it would highly be appreciable.
    Regards.

    Hi,
    The budget availability check is done only against the assigned values and
    Following entried does not contribute to the Assigned value
        V: Value type not relevant (<> Act./Plan/Stat.Act./Stat.Plan/Commt)
        D: Delivery
        S: Settlement to object with no budget control
        R: Revenue cost element
        C: Cost element is exempt cost element
        M: Minimum from actual + commitment and plan per order value update
        P: Plan value is not on apportioned order / network
        B: Plan Costing Single Position
        S: Funds Commitment in Balance
    So the down payment is not covered for the calculation of the assigned value.
    Hence no check is carried out for the Availability check.
    hope its useful.
    Reward points if useful.
    Thanks..

  • Vendor Down Payment in Cash through F-02

    Hi All,
    When I am entering Vendor Down Payment made in Cash through F-02, it is not passing entry for WHT(TDS). It gives following error "Withholding tax amount exceeds total bank line item amounts"
    Pls suggest if there is other alternative wherein I can enter the vendor down payment made in cash with WHT (TDS) entries.

    Activated the option of "Cash Flow" in Bank Account Master ( T.Code FSS0).
    It worked.

  • Vendor Down Payment Clearing F-54

    Hi,
    I am clearing Vendor Down Payment using BDC for T-code F-54. I have Invoice no and Down Payment Document No, which needs to be clear against that Invoice.
    But, how to determine the position of that DP Document number in the next screen when i am using BDC? T-Code F-54 selects Down Payment Docs from table BSIK. So, in which sequence DP Document will be displayed in table control in the next screen? (e.g. {based on document no, Posting date} =>(ASC/DSC)).
    e.g: Invoice no: 7100000001 DP document: 5240000004
    after entering Header data on F-54 you will get below data,
    DP Document:
    1.       5240000001
    2.       5240000004
    3.       6600000003
    4.       6600000004
    So, how to determine my DP Document is @Position no: 2.??
    Thanks in advance.

    Nilesh,
    BDC is unable to select document in sort postition. This is a manual input and SHDB recording can't choose DP documents like that.
    I would recommend you clear downpayment by F-51 or change document FB03 for invoice reference field. It's same effect of F-54 however depends field status of of your installation screen.
    Best Regards

  • Vendor down payment clearing without VAT posting.

    Hello SAP Gurus,
    I have following issue:
    Currently our Vendor down payments produce VAT postings when clearing with final invoice, which is correct.
    But we have some old vendor down payments which does not include VAT and needs to be cleared without any impact to VAT postings.
    User is using F-44 transaction and can not define any tax code for postings, system calculates it automatically.
    It is not possible to make VAT posting happen and then make reversal postings fot VAT accounts as well.I tried to check flag 'Posting without tax allowed' and uncheck 'Post automatically only' in account master data. And then make manual posting using that account via FB01 but system still requires tax code to be entered because Tax category in account master data is set to '<' I'nput Tax Account'. It is impossible to change Tax category let's say to ' * ' because account have balances on it.
    Could anyone advice how can I clear these downpayments without VAT posting?
    Thank you,

    I have tried to enter 0% input tax code, but still I'm not able to post document because of error msg:
    Tax entry not possible in this item
    Message no. FF724
    Diagnosis
    You can not enter a tax amount in this item since, due to the posting amount entered and the tax code, a total tax amount of zero has been calculated.
    This could either be due to the fact that the tax code has been defined with a value of 0%, or because the posting amount entered (that is, the tax base) is too small.
    Example:
    With a tax rate of 15%, a tax amount greater than zero will only be achieved with a base amount greater than 0.04. With values of 0.03 and less, it is therefore not possible to enter a tax amount.
    Procedure
    Only enter tax amounts in conjunction with tax codes for which a percentage rate not equal to zero has been defined. Make sure that in documents with several G/L account items you enter the total tax amount in an item with a sufficiently high posting amount.

Maybe you are looking for

  • 4:3 event in a 16:9 project

    On a recent trip, I recorded using a digital video camera (4:3) and my iphone 4 (widescreen). I imported the videos from both, and created a 16:9 project. In the events pane, the 4:3 videos have black lines on the left and right, but when I drag them

  • Radio does not display song that is playing

    I own a 5th gen iPod (Black, 16 GB). When I turn on the radio (Even if I "Scan" for stations) when a song is playing, the song name and artist do not show up on the screen like it shows in the pictures. How do I get this function to work?

  • Can't rename file with Applescript

    Hi, I'm a programmer but I'm new to Automator and Applescript. I am trying to rename pdf files based on a specific line of its content but I don't succeed. I created a service that exports the text from the pdf to a file. Then I use applescript to re

  • Importing a package recursively (with subpackages)

    Hello everyone, I'm a 1st-year CS major and am new to Java. I had a question about importing packages. As I understand it, when you use a wildcard when importing, it will import the classes within the package specified before the asterisk, but none o

  • GeForce FX 5200 and Windows ME

    I have a machine that dual boots into Windows ME.  I just installed an MSI GeForce FX 5200 graphics card and an MSI NForce2 board.  I have installed the NForce 2.03 drivers, but when I install the GeForce 43.45 or 44.03 Windows ME drivers, the system