Vendor for Overhead Conferencing?
I have a large conference room requiring voice capabilities for conference calls.
The room is too large for a 7937 with the external mics, and I am interested in an overhead solution where the speakers are ceiling mount and the mics are located on the conference table.
Does anyone know of a good source in the US for similar set up? Any other devices that may get me where I need to go?
Thanks
Hi Rosa,
Go to - VENMAP table.
Tthis table has 2 entries for a SUS vendor, one with R/3 logical system and another with SUS logical system.
Filter it with the SUS logical system you should be able to get the list of all SUS vendor.
Thanks,
-Devi Swain
Similar Messages
-
I keep getting this screen and before I have to call and pay and wanted to see if there was something that I could do.
Pavilion dv4-1123us get blue screen with "hardware malfunction call hardware vendor for support"
This question was solved.
View Solution.I would say its just a conicidence and recommend you to do a system restore. As its an intermittent problem, you never know if you face same issue once again.
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!! -
Report to transport vendors for a plant and material type
Hi Guys ..
Is there any report fwhere is can download all the vendors for a particular Plant and type of material.
Thanks for your supportHello Vivek,
I have checked these tables but my issue is to get the list of Material numbers in the table along with a field for Class type.
So this does not happen in these tables.
However thank you for the tables given
Regards
Mahesh -
How to query opening balance for all customer or Vendor for an speci. date
Hi,
How to query opening balance for all customer or Vendor for an specific date?
Example:
put any date and query will show all customer/ Vendor that date opening/current balance.
Regards,
MizanHi mizan700 ,
Try this
SELECT T0.[DocNum] As 'Doc No.', T0.[CardCode] As 'Customer Code',
T0.[CardName] As 'Customer Name',(T0.[DocTotal]-T0.[PaidSys]) As 'O/S Balance'
FROM OINV T0 INNER JOIN OCRD T1 ON T0.CardCode = T1.CardCode
INNER JOIN OCRG T2 on T1.GroupCode = T2.GroupCode
INNER JOIN INV1 T3 ON T0.DocEntry = T3.DocEntry
WHERE T0.[DocStatus] ='O'
AND
(T0.[DocDate] >='[%0]' AND T0.[DocDate] <='[%1]')
Regards:
Balaji.S -
How to block set of vendors for creating PO but allowing them to create RFQ
Dear Experts,
I want to block the set of vendors created by GS01 for creating Purchase order but allowing them for creating RFQ. I tried using XK05 but its blocked even vendor for creating RFQ. So is there any way to do so in my business practise ?
I already tried several way but no one is fullfilling my requirement. So i need all you experts valuable input on this.
Regards
ArunHi Aleksey Tkachenko,
Well i am also trying to do the same using the badi you had told me but my query is how can i do this if i create a set of vendor using gs01 or provide an interface to user to update the vendor account to whom we dont want to allow for creating PO but they can create RFQ. and using this BADI how i can read this set of account of vendors?
Can you tell me how to handle this scenario using any of the method?
Regards
Arun -
Maintain Vendor for the excise invoice
Dear Guru's,
While creating goods receipt (In STO Process), I am facing the following error,
"Maintain Vendor for the excise invoice"
How to solve this one.
Regards,
CSHi CS,
Check whether you had maintained the vendor(supplying plant) in J1ID and also check whether excise indicator 1 is there.
And also check whether vendor (supplying plant ) is linked with customer in vendor master in Account control tab and also check whether vendor master (supplying plant) is linked to your customer master in control data ....
Hope this will serve you..
regards,
Patil -
Maintain Vendor for excise Invoice in STO
Hi Friends
I am doing GR against Stock transport Order and getting error as Maintain vendor for excise Invoice
I created vendor master for plant then i maintained additional purchasing data in purchasing view there i did settings as follows
Purchasing View --> Extra --> Add purchasing data --> Selected data retention at plant level
Purchasing view --> Alternative Data --> Selected purchasing here i maintained supplying plant code
Same procedure i did for receiving plant also.
After that i maintained vendor master recored excise details in J1id
Still i am getting same error
Please give your valuable inputs
Regards
Vivek
Edited by: Supergene on Jul 24, 2008 1:01 PMHi,
Its not necessary to selected data retention at plant level.
Have you assigned Excise Indicator (For e.g. "1") to the Vendor Master, also maintain the ECC No, Excise Reg, Division, Commissionarate, LST, CST, etc....
Then it will work for new transactions. (For old, I think it will not work) -
Maintain vendor for excise invoice -STO process??
Hi,
Still facing problem in Same issue so...
I am doing Stock transfer from plant to plant in same company code.
i have maintain all the information in the Excise TAB of migo but still face the following errors.
Error is "Maintain Vendor for the excise invoice. (Message No 4F185) ...????"
In STO process, vendor it won't come in the picture ??Becas , once we create purchase order with UB document type , it 'll ask for only supplying plant not for vendor .
So what might be the problem and how to locate it , trouble shoot the same .???
Thanks in advance
SAP-MMhi
check following
goto Xk02
give ur vendor ( plant assigned to)
then goto PURCHASING TAB
here in menu EXTRAS>ADD URCHASING DATA
here u can find field for plant
just check and revert back
regards
kunal -
Multiple Vendors for one Purchase order in delta load
Hello,
While Extracing data from 2LIS_02_SCL we are getting 2 vendors for a singe purchase order , as we know that for a purchase order we cannot have multiple vendors.
When i checked data in deta queue (RSA7) we are able to see only single vendor for 1PO, but when we load to bw and checked data in PSA we are getting 2 different vendors for same PO.
Regards,
Vasu.Hello,
As per my understanding you are getting data upto delat queue (RSA7) Correctly and you are getting incorrect data at PSA level In bw.
i think you must have some customer exit in ECC for the datsource 2lis_02_scl. so i would say that there may be some problem in the code since the customer exit code will get triggered after RSA7 and before PSA in BW..
Additionally you can cross check in RSA3 with update mode as 'D' which gives delta before loading to BW.
Debugging option :
Load data to BW and pick the PO having multiple vendors and in ECC dubug using RSA3 with update mode as "R" inorder to fing the problem in customer exit code.
Hope this helps you..
Regards,
Srikanth. -
How to enter a specific vendor for the delivery costs in purchasing order?
Now I want to create a purchasing order including planned deliver costs such as Freight, Coustoms ect, as the vendor of such planned deliver costs is different from the goods supplier, then How to enter a specific vendor for the delivery costs in purchasing order? That means the partner for invoice partner will be two vendors at least in one purchasing order. thanks very much.
<i>
<b>No one would like to answer this question?</b></i>
Message was edited by:
King Qihi,
You can have vendor at each condition record level.
try it out.
cheers
Rav -
FBCJ Error - Enter a vendor for this accounting transaction
Dear Experts,
I am trying to enter expenses and I have mentioned Vendor Account No. in the Vendor field using splitting option with combination of Vendor Pay/Rec and All Expenses Business Transaction. But the document is not getting posted and giving the error - "Enter a vendor for this accounting transaction". But if I dont use split option it saves.
This problem I am facing for the last 2 days only. Can you suggest what could be the reason for this error.
Thanks,
DebDear !!!
I have done everything as you suggested, but it is still showing the same message. Can you please look in to this again.
Thanks in advance !!!!
Deb -
Cost center planning for overhead calculation
Gurus,
I have a doubt regarding the cost center planning for overhead calculation.
My scenario is:
There is a service cost center from which a certain percentage I want to allocate to the products as overhead. Now while doing so I have created a cost center and a cost element of type 43 (internal activity allocation). This cost element is the base for overhead calculation. Also I have created one cost element of type 41 (overhead rates). I have defined the credit (of cost sheet) with the cost element of type 41 and the cost center as mentioned.
Now I am facing a problem while planning the cost center with cost element type 43 through KP06.The system is throwing the error message: 'Cost element xxxx can only be used for activity input'. My understanding is we must carry out the planning for the cost center to allocate a certain percentage to the product cost estimate. If I am not allowed to use the cost element of type 43 to plan, what should I use for the planning?
Request your suggestion.
Thanks in advance!
Snigdho.Hi
Since you mentioned catg 43 cost element, I thought you are using Activuty Type
To apply overhead on the product during CK11N, you need not plan any value on the cost center... The values planned in the cost center can not be used as a BASE in your costing sheet....
It goes like this
1. Your cost estimate has BOM + Routing
2. So, the cost elements that you would see during CK11N, can be broadly classified into 3 types
a. Primary cost ele - Material Consumption accounts for BOM components
b. Secondary cost ele (Catg 43) - If you use any actvity type in the routing
c. Secondary cost ele (Catg 41) - These cost elements are parasites... They need some basis to calculate the overhead value... That basis can be either the (a) or (b) above.....
I think, what you are planning to do is Plan Primary cost ele in a cost center and trying to use the same as the Basis.. That wont work!
What you need to do is
a. PLan the values in the cost center, say, 100,000 USD
b. Absorb it on the basis of 2.a or 2.b
If 2.b is not applicable in your case, since you are not using activity types, then 2.a is the Only option left for you
Hope it is clear....
Regards
Ajay M -
In STO process, am getting error in GR"Maintain vendor for Excise invoice "
Hello
In STO process(MM route) I have prepared excise invoice by J1IS. While preparation of J1IS i have enterd customer(recieving plant as customer).I have also mainatin the the supplying plant as vendor in J1ID. But when i am trying to capture the excise invoice at recieving plant during GR am getting error "Maintain vendor for Excise invoice "
Kindly suggest
Regards
Manishdear sir
please check in customer master record , in control Data tab, vendor master assigned .
if not assigned the vendor master in customer master.
regards
jrp -
Block Vendor for Goods Receipt without QM
Dear Experts,
We have a specific requirement to set a purchasing block in a vendor (XK05), which must necessarily include a block in goods receipt.
As far as I know, and according to SAP Note 64440 - MMIM: Block vendor for goods receipt, this is only possible activating QM for the material.
However, our client cannot do it for all the materials so we need to find out an alternative solution. Does anyone have any idea how can we do it?
Thanks in advance.
Best Regards,
AndreiaHi guys,
Thank you very much for your quick replies!
Jürgen L, you are right. The requirement is not to block the GR forever, but just during a period of time, in specific situations.
AKTP MM, we will check the BADI: MB_MIGO_BADI, as suggested. I will come back with feedback, as soon as possible.
If you have more suggestions please feel free to share!
Thank you.
Best Regards,
Andreia -
In need of a report that will list all vendors for all parts in our plant.
Can anyone tell me if there is a report in SAP that we can use to list all suppliers for a given material? We are operating in SAP ECC6.0 and need a report that will list all vendors that the company has used for a given part. Is there a standard report in SAP that pulls information from purchasing info records? Woud this be a custom report? I have tried using MCE3.
Also does anybody know of any SAP consultants that can help us create custom reportsFor the list of vendors for the material - Me03 if source list is maintained
For list of vendors with info record - Me1m
For list of vendors with PO - Me2l
If you can give the correct requirements then your Technical consultant will develop a report in the required format.
Maybe you are looking for
-
HT204053 How do you change the apple ID that is set for iCloud?
My iCloud is set up to my families email instead of mine. It's asking for their password. Can I change the account to be my apple id?
-
I can't get tabs to open or google search to operate without constant ringo and I get the alert...The operation can not be completed because of an internal failure. A secure network communication has not been cleaned up correctly. I have 8.0 firefox
-
Hi, Can anybody explaine me Asset under construction configuration Thanking you. < For basic queries, refer to SAP Help or search the forums. Please respect forum rules. Thread Locked. >
-
AppleWorks 6 error: Can't get every record of document "ElectroM (DB)"
"count" is in ApleWorks 6 Dictionary and script got compiled OK ! What is wrong in that script ? tell application "AppleWorks 6" set numberRecords to count records of document "ElectroM (DB)" set loopCount to 1 repeat until loopCount > numberRecords
-
We have a need when ever xml files are placed in a directory BPEL Process should pickup and Proces it. Is there an example that I can Take a look or some one can guide me? Thanks Raj