Vendor Get Details

Hii,
Is there any Function Module or Bapi for getting details of a vendor.
Other than this three functional module
1) read_lfa1
2) read_lfb1
3) vendor_read
Regards
Hiren K.Chitalia

Hi again,
1. BBP_VENDOR_GET_DATA2
2. use this FM.
3. In tables prameters, 
   there is ITAB_ID_LIST (with only one field LIFNR)
4. In that put one record of the
   vendor u want.
5. then execute the FM.
6. u will get your data in
   the following different tables
ITAB_LFA1
ITAB_LFBK
ITAB_LFM1
ITAB_ADRC
ITAB_ADRP
ITAB_ADR2
ITAB_ADR3
ITAB_ADR6
ITAB_IF_IBU
ITAB_IF_CF
regards,
amit m.

Similar Messages

  • How to get change in Vendor bank details

    Hi,
    i have to do one modification in vendor bank detail program. The user wants the created date of IFSC code(LFBK-XBREF), for that I got the table
    CDHDR and field UDATE. But the problem is that I am not able to join that table with the exiting table of the report.
    In this report LFA1, LFBK, ADRC,LFB1 these tables are used. Suggest me how can i join the table or how can i get created date of that field from any other table.
    Thanks & Regards,
    Anuradha

    I think you should not join CDHDR with other tables.  Use standard function module "CHANGEDOCUMENT_READ_HEADER" to extract the change information.
    Regards
    Vinod

  • RFC to get the Vendor Master details

    Hi Experts,
    We have a requirement to create an RFC to get the Vendor Master details (Used for Searching the Suppliers), where the Input criteria : Vendor Name(First Name & Last Name), City, Purchase Organisation and the corresponding output is Address Data, Central Data, Bank Information, Sales Data of Customer. Is there any standard report or function module we can use for this requirement.?
    Thanks & Regards
    -Asim

    Hello,
    You may need to write your own RFC with the interface that you want. If all the input parameters are obligatory then you can use the following logic
    Select the vendor numbers from table LFA1 based on the name and city.
    Us these vendor numbers with the purchase organization from the input parameters and filter them using the table LFM1.
    Now the result will be all vendor numbers with the name specified in the city for the specified purchase organization.
    That may be multiple vendors so run a loop and inside the call the RFC BAPI_VENDOR_GETDETAIL and pass the vendor numbers to get the other details.
    Hope this helps in solving your query.
    Regards,
    Sachin

  • Vendor bank details report

    Hi SAP Experts,
    In the report If we gave any vendor number (codes)range can we get vendor bank details in that report .but no user exit, is any standard report there
    this is  my client requirement
    Please update me ASAP
    Have a good day
    Regards
    Surya

    Check the Report S_ALR_87012086 - Vendor List
    You can view vendor  bank details by ticking the check box - Bank deta

  • SQVI - Report for vendor bank details.

    Hi all,
    I am using SQVI -- Quick viewer reporting tool to get the vendor bank details. for that i am using tables
    LFA1
    LFBK
    BNKA
    TIBAN
    I joined the above mentioned tables by using table joins. I cross checked the vendors in Tcode: FK03.
    But i found that the vendor is not having IBAN number in the transaction, where as list is showing the IBAN number.
    So please clarify me why it is happending.
    Regards,
    Chinnna

    Hi shiva,
    I tried with the join conditions provided by you. But the problem is ...
    If a vendor is having 2 IBAN numbers, then the first IBAN number is fetching not the two iban numbers.
    Why it is not taking the first entry in FK03 tcode.
    please give me some help.
    Regards,
    chinna

  • T.code for P.O to Vendor payment details

    Dear All
    Request  you, please let me know any t.code is available for tracking  Purchase order to vendor payment details.
    It means in that T.Code out put we have to get details of P.O, GRN , IR and vendor payment details.
    Thanks in advance
    RAO

    Hello,
    There is no standard report available in SAP which will give a complete details from PR to Payment in one screen.
    However you can check the normal vendor balance report (TCODE: FBL1N) where you will get all the vendor cleared & open vendor items. From the cleared vendor items you can drilldown to the PO and PR.
    Regards,
    Prasad

  • J1id - Vendor excise details issue

    Hi All,
    When I create record in J1ID, for vendor excise. the "change on" fields should be auto populate, but this is not happening.
    This field doesnu2019t change automatically. I have to do manually.
    How can i change this, I need when i change record date should populate automatically at "change on". is there any settings for it?
    Any help would be appreciated!! 
    Regards,
    Gaurav Nayar

    Hi,
    Thanks for quick response!!!!
    my concern is, when i create or modify record in vendor excise details via J1ID.
    the "change on" field, which is in third last column of it. should get populated automatically (take current date).
    please let me know if you still have some doubt in this....
    is there any settings in ECC for this, because my customer excise details working perfectly.
    Regards,
    Gaurav Nayar

  • Maintain Vendor Excise details - MIGO error

    Hi all........
    Im doing Stock transfer from one plant to another plant within a company code through stock transport order.
    I created STO in receiving plant, after the I created outbound delivery in VL10B and PGI in VL02N in supplying plant. With Post Goods Issue Material document I created Excise Invoice in J1IS.
    While doing MIGO in receiving plant I hve to enter the same Excise Invoice number which I created in supplying plant.
    When I enter the EI number system is recognizing the number.  But the problem is when I click on save its giving error "Maintain Vendor Excise details".
    In sto we will not mention any details then y system is giving this error.
    Please suggest.
    reg
    Durga Ram

    Hi Durga
    There are few check points to resolve this problem
    --Check for vendor master for plant XYZ & in control data we have to maintained the customer no. e.g. 999 for XYZ
    ---Check in J1ID Chapter id,Material and Chapter Id Combination whether you have maintained or not, if not maintained it
    --- Check J1ID whether you have maintained the Vendor excise Details for That supplying plant, if not Maintained it.
    i hope this will get resolved your problem
    Thanks

  • Vendor excise details in gr

    Dear Sap Experts,
                                  This is chandra shekar MM consultant,  i'm facing one problem is when i'm doing GR againest to the STO i'm getting error like maintain excise details for vendor and excise invoice to vendor , i have checked in J1ID transaction everything is like maintained  vendor excise details , chapter id , venvat determination  even though i'm getting this error please do needffull

    Dear Kunal,
                    Thanks for your reply , please find the messages below
    1.     Excise Details are not maintained for Vendor .
    2.     Maintain Vendor for the excise invoice

  • Do we have vendor bank details in MEDRUCK or any standard smartform

    HI,
    Do we have Vendor bank details getting printed on standard script(Medruck) and any other standard smartforms.
    how can we test Purchase Order output.
    Regards,
    Nagaraju

    Hi,
    In FBZP, while defining the payment method for the country, you have an option - Required master record specification. In this you need to select Bank details. This will make sure that when you assign this payment method in the vendor master, it validates if the bank details in the masters are maintained and also include it in the payment data set.
    Please check and confirm.
    Thanks and Regards,
    Anit

  • Vendor Bank details in vendor master data

    Hi
    There are two tabs in vendor master data:
    1. Payment Transaction tab
    2. Payment Transaction accounting tab.
    Now i have 100 different vendors with all vendors having account in 20-25 banks. Even if the bank is same, these vendors have account in different branches.
    Now in SAP will i have to create so many bank keys for 100 different vendors?
    In payment transaction tab, there is only one field for our house bank for making payment through APP. What if i need to pay to different banks? Where i will maintain multiple house bank in such cases.
    Please reply for above two queries.

    Hi  Deepak,
    Please understand that there is a total disconnect between the House banks(internal Banks) that you create in FBZP and between the vendor bank Accounts. For Vendor banks you don't need to create House Banks..but YES, you will have to create bank Keys as many as required to maintain Vendor bank details in XK02..Payment transactions tab.
    If you have more than one Bank from which you want to pay.. then maintain all those Banks in FBZP and link it to Payment Methods and when you run APP, you can choose which Bank you want to pay from..
    Secondly, while posting Invoice also if you are sure about the Bank that you want to use.. enter house Bank while posting..
    Thirdly, if you are sure about the Vendor that he gets paid through a particular bank only.. maintain that particular bank in the vendor master data.. and if you are not sure about the Bank.. keep it blank..and decide in APP variant which bank you want to pay from..
    Vendor master bank details of the vendors are used to send to Bank,.. so that the money can be directly credited in the vendor Bank account..
    Hope this helps..
    Regards,
    SAPFICO

  • Vendor bank details in F110

    Dear Experts,
    We are not able to get vendor bank details in payment praposal or payment list when executing F110.
    we are using Payment medium program -RFFOD__U; and Name of print dataset-LIST3S as per our clinet country requiremtn we are using these payment program.
    Please let me know how we can get vendor bank details in payment list. or where i need to do make changes.
    Regards
    babu.

    Hi,
    In FBZP, while defining the payment method for the country, you have an option - Required master record specification. In this you need to select Bank details. This will make sure that when you assign this payment method in the vendor master, it validates if the bank details in the masters are maintained and also include it in the payment data set.
    Please check and confirm.
    Thanks and Regards,
    Anit

  • Vendor Master details

    Hi,
    can you tell me a table where i can get vendor master general details and bank details (both in one table)?

    Hello Gayani,
    Sap will provide you each transaction will gets updated in one table. In your case
    Vendor master will update in 3 tables, they are
    1.General Data - LFA1
    2.Co.Code Data - LFB1
    3.Pur. Org. Data - LFM1
    Vendor bank details will update in LFBK table
    If useful pl assign points
    Thanks
    Para

  • Vendor CIN details

    Is there any std report to get vendor details like vendor no, PAN, Tax paid ?

    Hi,
    You can get it in J1ID only. It works as transaction as well as report also.
    Here Select Vendor Excise Details and click maintain to maintain entries and click display to only display it as report.
    OR you can create an ABAP query using tables J_1IMOVEND and LFA1

  • How to export customer/vendor aging detailed transactions to excel ?

    hi all,
    How to export customer/vendor aging detailed transactions
    to MS-Excel ?
    After entering all selection creterias,report
    opens up with consolidated aging details
    for each customer,we need to double click a
    customer to get detailed break up of all transactions,
    Is it possible to export to ms excel for detailed transations break up of all customers/vendors ?
    In standard it is only possible to export detailed
    transactions break up for a customer/vendor ?
    Jeyakanthan

    Thanks,
    Eventhogh we don't need detailed aging report in print,
    we converted print preview into text file
    and then converted to excel format.
    Jeyakanthan

Maybe you are looking for