Vendor is not updating in batch while doing STO

Hi All,
I created a PO with vendor 123456.Did a GR for it.
In GR i maintained a batch AA1 and received the material. Now the stock is in A plant with batch AA1 and vendor 123456.
Then i went in to batch AA1 and found that vendor(123456) was updated in batch master.
Next i created a STO for moving the stock from one plant to another.  Stock transfer A plant to B plant.
In STO also i used the same batch AA1  and in outbounddelivery i used same batch AA1 and in GR i maintained the same batch AA1 but plant B.
Now i checked the batch AA1 for plant B.
Here the vendor is not updated in the batch AA1 for plant B combination.
What may be the reason.
If STO is done system cant able to pick the vendor?
KIndly help me in this regard.
Regards
KK

HI,
Thanks for the reply.
Yes you are exactly correct.
Is there anyother way that vendor can be updated in the batch?
Regards
KK
Edited by: Kishore Kumar Galla on Nov 10, 2009 2:17 AM

Similar Messages

  • ITEM IS NOT RELEVANT FOR BILLING WHILE DOING STO (VF01)

    HI
    I am getting an error while doing STO in CIN
    Item is not relevant for billing while doing VF01 STO proforma invoice JEX with delivery document type NL and item category NLN
    I searched the forum but not able to get an appropriate solution for this.
    Kindly revert me on the same
    Regards
    MANOJ

    Hi Manoj,
    The only reason for the error you are encountering are,
    A. The item category missing at the item level in the copying controls from delivery to JEX (billing type)
    Kindly check throughly and confirm,
    If it is there , then delete the configuration , i.e. item category from the copying controls and do it again.. Even if this do not resolve your issue, ask your technical team to debugg the billing document during creation and check.

  • User Exit for MSC2n( Batch) while doing a Good receipt for an order

    Is ther any exit to update the Date1 field(MCHA-FVDT1) in MSC2n( Batch) while doing a Good receipt for an order
    Thanks in advance

    Hi Varsha,
    Try these User Exit.
    BATCHCHK  Function Module Exits for Check in Case of Batch Change
    MBCFC010  Propose batch number on Inventory Management item scree
    SAPLCHVW  Batch where-used list
    SAPLMHD1  Shelf life expiration date
    SAPLV01D  Determining the initial status of a batch
    SAPLV01P  Function Module Exits at Time Batches Are Updated
    SAPLV01Z  CFCs for internal batch number assignment
    SAPLV1ZE  CFCs for external batch number assignment
    SAPLV1ZN  CFCs for batch valuation in VB_CREATE_BATCH
    Regards,
    Vijay

  • Vendor field not updated in CRM pricing condition table

    Hi,
    We have maintained condition table with Material and Vendor fields in ECC and table is active
    After replicating this table from ECC to CRM, vendor field not updated in table and it is inactive.
    There is any mapping settings required to update vendor field in CRM table from ECC.
    Please help me out to solve this issue
    Regards
    kishore kumar

    hi,  the data field of vendor is a standard one or custimizing one?
    I remeber there is a data mapping setting in CRM, for condition field.   If you want to mapping a ERP standard field to a CRM custmizing one, you need to setting your rule in it.  Maybe you can find it in SM30 view.
    I can't login a CRM system now, so sorry for not offer your the view name.

  • Validity Table not updating for 0IC_C03 while updating data

    Hi,
    1.Validity table not updating for 0IC_C03 while updating data in my BW 7.4 With HANA data base?
    Key fields : 0Plant
                       0Calday
    if you run this programe after loading data - RSDG_CUBE_VALT_MODIFY it is updating.
    2. I am not getting no marker update option in non-cumulative Info cube 0ic_c03 manage tab or in DTP tabs check as per 7.4 modifications?
    and  2LIS_03_BX in DTP I am getting below this option only
    Can you please give me solution for this issues.
    Regards
    Umashankar

    Hi Uma,
    Please go through the below link which might be helpful.
    Not able to Edit Validity Table : RSDV
    Marker Update Option is available under Collapse tab of Info cube.
    Thanks,
    Karan

  • My iphone4s can not update the apps while it could download the apps. It shows that the update can not access to itune store.

    My iphone4s can not update the apps while it could download the apps. It shows that the update can not access to itune store. I don't know how to deal with it...

    Many people (including me) are having the same problem at present. There are other threads in the message board with the same complaint.
    There is nothing you can do about it except wait for Apple to fix the problem.

  • Upload shipment Cost to Inventory while doing STO

    Hi all,
    I want to know that whether it is possible to upload Shipment cost to Inventory in Intra company STO.
    I have assigned vendor to my recieving Plant in this way system is allowing me to do Inbound delivery & then capture shipment cost but since in Intra company STO while doing PGR no accounting entries take place so system is not picking shipment cost while doing PGR. whether I am missing something Please update.
    Thanks
    Nitesh

    Hi,
    If you follow carefully steps from note 427944 you will get it.
    Rate if helful.
    Regards, david
    Please refrain from begging for points, it is against forum rules
    Edited by: Csaba Szommer on Apr 8, 2011 1:18 PM

  • Delivery Qty for Material is less than P.O. while doing STO from Plant

    Dear All,
    Please help me in this issue.
    While doing STO from one Plant to another Plant, The picked Delivery qty in VL10D is less than P.O. qty for one perticular
    Material. What could be the issue and solution from it.
    Regards
    AJIT K SINGH
    Edited by: AJIT K SINGH on Jun 8, 2010 2:01 PM
    Edited by: AJIT K SINGH on Jun 8, 2010 2:03 PM

    >
    AJIT K SINGH wrote:
    > Dear All,
    >
    > Please help me in this issue.
    > While doing STO from one Plant to another Plant, The picked Delivery qty in VL10D is less than P.O. qty for one perticular
    > Material. What could be the issue.
    >
    > Regards
    > AJIT K SINGH
    Seems like the stock is not available for the particular material, thats why it is picking up the less amount which is available in stock, or the ATP check has blocked the stock available, and you have certain pieces available currently for the said material.

  • Excise conditions while doing STO

    Dear experts,
    I am doing STO . I want all the excise conditions in the pricing procedure for STO (YSTO) . Basically I want to enter the BED.ECESS,SECESS, values in the pricing procedures since there is no tax codes i would assign while doing STO.
    subhash kulkarni

    Hi
    I guess you are makeing STO through transaction ME21N and then Delivery through VL10B and then Billing through SD transaction VF01, so throughSD Pricing procedure route you can achieve this. I mean make pricing procedure in SD and assign it to your Billing type, then whenever you create Billing through VF01 pricing procedure will be called and you can maintain your Excise conditions.
    Thanks
    Vineet Baweja
    Sparta Consulting

  • Vendor is not maintained while doing STO between one co code

    HI
    I creating stock transfer order betwen one co company code but getting error vendor is not maintained for this co code , what could be the reason , kindly suggest.
    thanks.

    Hi
    I think you have done all configuration for STO with billing for supplying and receiving plant. Remove your supplying plant and receiing plant combination from config "Assign delivery type and checking rule" & Assign document type & one step procedure.
    It will work. If you want all configuration then you need to assign your supplying plant to a vendor in vendor master Purchasing additional data
    Regards
    Antony

  • Next inspection date is not updated in batch / prposed at the time of UD

    Hi
    I have configurted the system for retest of batches, the system successfully creates the inspection lot but when does not propose next inspection date at the time of UD nor it updates in Batch Master.
    I entered inspection interval days in QM View, the system entered the first inspection date correctly. Also Batch Restriction is working properly.
    Kindly help.
    regards
    Mobashir

    Hi Shaymal & VRMP
    I have checked the system, the only problem I am facing is that the system does not show next inspection date dialog box at the time of UD where I can see the next inspection date being set by the system
    Say, I use QA07 (Triggered Manually) on 19.jan.08. The Next inspection date was 26.jan.08 and Initial Run in Days was 10 (days), the system created inspection lot on 19.jan.08 successfully. At the time of UD it automatically set 29.jan.08 as the next inspection date (i.e. 19.jan.08 + 10 days)  istead of 06. Feb.08 (i.e. 26.jan.08 + 10 days) without showing dialog box / suggesting next inspectino date. 
    regards
    Mobashir
    Edited by: Muhammad Mobashir on Jan 19, 2009 7:11 AM

  • Retention amount paid to vendor is not updated in PO history tab

    Dear All,
    I had activated business function 'LOG_MMFI_P2P'. As a result i am getting Payment processing tab in PO.
    There i can define Down payment and Retention percentages. I had created a service purchase order and then service entry sheet.
    After the acceptance of service entry sheet i did invoicing (MIRO). Here i get an option to clear down payment (an additional button becomes available to clear down payment). That scenario is working perfectly fine. System also proposes the retention amount. I can change retention amount/percentage or continue with same.After invoice is posted the retention amount is visible under PO history tab against Invoice number.
    Now my problem is when i am doing payment of retention amount(after doing payment of services deducting down payment and retention)  to vendor the 'Posted Retention in Document Currency' column in PO history tab is not updated.
    Regards,
    Kamal

    Dear Pankaj,
    Thanks for quick Reply.
    I think you did not understand my question. In PO history tab for down payment scenario (defined through PO and cleared in MIRO) proper lines are getting created. For retention new line will not be created. But the invoice row in PO history tab is having two columns -
    1) Retention in Document Currency.
    2) Posted Retention in Document Currency.
    The first column is having value which is the retention amount. But second column is not having any value even after the payment (portion held as retention)is made.
    I will add one more thing. If i run FK10N for the vendor- then Special G/L account for retention is updated properly.
    Regards,
    Kamal
    Edited by: kamal.anandani1 on Apr 22, 2011 8:02 AM

  • Firefox-hg not updated in a while

    I have been using firefox-hg for quite a while, and have been happy with it.  Recently, I noticed that it has not updated, even though I update quite frequently.
    It keeps failing, so I ran the install specifically and recieved the following output:
    5:59PM % yaourt -S firefox-hg ~ (knute) pts/1
    ==> Downloading firefox-hg PKGBUILD from AUR...
    x firefox-hg.desktop
    x PKGBUILD
    x firefox.install
    x mozilla-firefox-1.0-lang.patch
    x firefox-hg-safe.desktop
    x firefox.sh
    x mozconfig
    Comment by: Det on Fri, 11 Feb 2011 09:35:56 +0000
    In which point did you think of actually fetching the sources?
    Comment by: mutantmonkey on Tue, 15 Feb 2011 02:53:52 +0000
    The package seems to work fine without any code to fetch from Mercurial.
    Erus: Thanks, I can try that out the next time I update.
    First Submitted: Wed, 18 Jun 2008 02:27:28 +0000
    firefox-hg 62212-1 : Standalone web browser from mozilla.org, latest development version
    ( Unsupported package: Potentially dangerous ! )
    ==> firefox-hg dependencies:
    - gtk2>=2.16.2 (already installed)
    - gcc-libs>=4.4.0 (already installed)
    - libidl2>=0.8.13 (already installed)
    - mozilla-common (already installed)
    - nss>=3.12.3 (already installed)
    - nspr>=4.8 (already installed)
    - libxt (already installed)
    - hunspell>=1.2.8 (already installed)
    - startup-notification>=0.10 (already installed)
    - pango>=1.24.0 (already installed)
    - desktop-file-utils (already installed)
    - cairo-tee (already installed)
    - libpng>=1.2.24-3 (already installed)
    - libjpeg (already installed)
    - lcms (already installed)
    - mesa (already installed)
    - libproxy (already installed)
    - mercurial (already installed)
    - zip (already installed)
    - pkgconfig (already installed)
    - diffutils (already installed)
    - imagemagick (already installed)
    - python2 (already installed)
    - xorg-server (already installed)
    - autoconf (already installed)
    - libnotify (already installed)
    - wireless_tools (already installed)
    - yasm (already installed)
    ==> Continue building firefox-hg ? [Y/n]
    ==> ------------------------------------
    ==>
    ==> Building and installing package
    ==> Determining latest hg revision...
    requesting all changes
    adding changesets
    transaction abort!
    rollback completed
    ** unknown exception encountered, please report by visiting
    ** http://mercurial.selenic.com/wiki/BugTracker
    ** Python 2.7.1 (r271:86832, Feb 16 2011, 20:59:04) [GCC 4.5.2 20110127 (prerelease)]
    ** Mercurial Distributed SCM (version 1.7.5)
    ** Extensions loaded:
    Traceback (most recent call last):
    File "/usr/bin/hg", line 38, in <module>
    mercurial.dispatch.run()
    File "/usr/lib/python2.7/site-packages/mercurial/dispatch.py", line 16, in run
    sys.exit(dispatch(sys.argv[1:]))
    File "/usr/lib/python2.7/site-packages/mercurial/dispatch.py", line 36, in dispatch
    return _runcatch(u, args)
    File "/usr/lib/python2.7/site-packages/mercurial/dispatch.py", line 58, in _runcatch
    return _dispatch(ui, args)
    File "/usr/lib/python2.7/site-packages/mercurial/dispatch.py", line 593, in _dispatch
    cmdpats, cmdoptions)
    File "/usr/lib/python2.7/site-packages/mercurial/dispatch.py", line 401, in runcommand
    ret = _runcommand(ui, options, cmd, d)
    File "/usr/lib/python2.7/site-packages/mercurial/dispatch.py", line 644, in _runcommand
    return checkargs()
    File "/usr/lib/python2.7/site-packages/mercurial/dispatch.py", line 598, in checkargs
    return cmdfunc()
    File "/usr/lib/python2.7/site-packages/mercurial/dispatch.py", line 591, in <lambda>
    d = lambda: util.checksignature(func)(ui, *args, **cmdoptions)
    File "/usr/lib/python2.7/site-packages/mercurial/util.py", line 426, in check
    return func(*args, **kwargs)
    File "/usr/lib/python2.7/site-packages/mercurial/commands.py", line 736, in clone
    branch=opts.get('branch'))
    File "/usr/lib/python2.7/site-packages/mercurial/hg.py", line 337, in clone
    dest_repo.clone(src_repo, heads=revs, stream=stream)
    File "/usr/lib/python2.7/site-packages/mercurial/localrepo.py", line 1886, in clone
    return self.pull(remote, heads)
    File "/usr/lib/python2.7/site-packages/mercurial/localrepo.py", line 1295, in pull
    return self.addchangegroup(cg, 'pull', remote.url(), lock=lock)
    File "/usr/lib/python2.7/site-packages/mercurial/localrepo.py", line 1692, in addchangegroup
    if (cl.addgroup(source, csmap, trp) is None
    File "/usr/lib/python2.7/site-packages/mercurial/revlog.py", line 1336, in addgroup
    chunkdata = bundle.parsechunk()
    File "/usr/lib/python2.7/site-packages/mercurial/changegroup.py", line 173, in parsechunk
    node, p1, p2, cs = struct.unpack("20s20s20s20s", h)
    struct.error: unpack requires a string argument of length 80
    ==> ERROR: An unknown error has occurred. Exiting...
    ==> ERROR: Makepkg was unable to build firefox-hg.
    ==> Restart building firefox-hg ? [y/N]
    ==> -----------------------------------
    ==>
    ==> WARNING: Following packages have not been installed:
    firefox-hg
    6:13PM % ~ (knute) pts/1
    It seems to have something to do with python, though, I don't have a clue what to do about it.  I have searched the forums, and found nothing regarding this issue.
    I just checked my pacman.log and found that the last time it was upgraded was a month ago.
    [2011-01-20 04:45] upgraded firefox-hg (60681-1 -> 60915-1)
    Any ideas?

    For installation issues with an AUR package, please use it's designated page instead of the forums: http://aur.archlinux.org/packages.php?ID=17820
    Closing.

  • Can not update tiger and safari does not start

    Hi everybody,
    I have actually two but probably interrelated problems: First, safari does not start and second, I can not update tiger.
    It all started a few days ago on my MacBook (Intel). Somehow, Safari produced an error (I only guess that it was Safari because I was downloading a movie clip) and Tiger was frozen. After rebooting, the whole system had problems (e.g., Safari and Skype were not starting). I tried to reinstall and archive mac os x but with no success. The problems were growing actually even worse (e.g., slow) and at some point in time, Tiger was not even starting. Thus, I did a full new installation of 10.4.8 (delete and install). Afterwards, it worked first but after the automatic software update, the system told me that their was an input/output error (???) during the 10.4.10 update. Afterwards, the whole system had again problems (slow and problems with even booting)!! Thus, the software update made it even worse. So, I did again a full installation (delete and install).
    I have to update my 10.4.8 system, because I also have iLife08 that needs at least 10.4.9. However, I don't know what to do to avoid again these update problems??
    In addition, despite the full installation, Safari is not starting. Thus, there is still some problems but I have now clue where this comes from as it is newly installed?!
    Any ideas?? Thanks...
    Crobus

    Crobus, welcome, since you are starting from scratch with each re-install why not try Kappy's Extended Hard Drive Preparation.
    http://discussions.apple.com/thread.jspa?messageID=5203987&#5203987
    Do all steps from 1 thru 6, it is by far a more maintenance oriented than an Erase and Install. After the preparation, install OS 10 from your DVD, then download the OS 10.4.10 Combo Updater.
    Joe

  • Vendor information not updated in the PO

    Hello,
    I have a case where a PReq was created with a blocked vendor GE Canada then when the buyer converted the Preq into the PO before saving the PO they she changed the vendor to GE Canada (Not blocked) but when she save the PO it still kept the old vendor's address which is in Toronto instead of updating the address with the unblocked one which is in Calgary.
    What causes this?
    Thanks
    Ibou

    Hi Ibou,
    If it's only for that one PO, why not update the Vendor address in the purchase order itself?  I assume that all other purchase requisitions created after the change copies the udpated address already.
    I also tested the scenario in our system and it behaves similarly to your sandbox system.
    Cheers.

Maybe you are looking for