Vendor Master Address Load

Hello,
I am having difficulty loading address data for vendor master.  I am using IDocs (message type ADRMAS).  However, when I execute the IDocs, an error message comes up stating "Please specify address group".  How and where do I specify this address group?
Any help would be much appreciated.
Thanks,
Jayesh

Hi,
The address group is in the segment E1BPAD1VL1-ADDR_GROUP.
Check the table TSAD7 for Address groups (central address management)
Thanks,
Naren

Similar Messages

  • Updating Vendor Master Address from HR Master using PRAA

    Hi All,
    When PRAA updates the Address into the Vendor Master from Infotype 6 subtype 1, does it consider the Second Street address as well?
    Some employees have 2nd address line populated in their IT0006 record and this isn’t showing in their vendor account.
    Regards,
    Anjali.

    Hi Anjali,
    No, the sttandard program does not update any subtypes of infotype 0006 other than subtype 0001. However, you can adapt this to suit your needs: an empty routine is supplied in the includes RPRAPAEX and RPRAPAEX_001 which you can adapt to your requirements You must implement the user exit routine 'set_address_by_user'. An experienced ABAP programmer can do this.
    Regards,
    Rodrigo

  • Employee master and Vendor master address mapping

    Hi All,
    I am working on a std. SAP program (RPRAPA00) that will create a vendor for an employee record ... this program when executed will create a vendor for a selected employee and will transfer the HR master data for that employee to the vendor master. Now when I am doing this I am having data mapping problem..there are few address fields in HR that are too long for the vendor master to hold for example:
    In HR                                                                  
    Street and House Number- 60 character
    City                                 - 40 Character
    District                            - 40 Character
    Vendor Master
    House number and street - 35 Character
    Address                         - 10 Character
    City                                - 35 Character
    District                           - 35 Character
    So can you please tell me how can I take care of this.
    Thanks,
    Raj

    Ho Rob,
    Thanks for the reply... I have another concern !!! we want to push the email address from HR master to Vendor master but looks like program RPRAPA00 is not taking care of that. So can you please tell me how can I get that.
    Thanks,
    Raj

  • Vendor Master Address at company codelevel

    Dear Experts,
    We have facing frequent vendor address  changes in our vendor master records.
    in the standard scenario,vendor address maintained at client level.but in our client
    we have 4 company codes,vendor code is same for all company codes address  is differs.
    suppose the company code XXX is in Delhi he  deals with YYY vendor in Delhi.
    another company code XXY in Mumabi,they deal with vendor YYY( one of YYY Branch) in Mumbai.
    users in different company codes are changing address frequently,how to  avoid this frequent changes.
    can  we maintain address at company code level.please suggest.
    Regards,
    Varun

    Hello
    Vendor address are maintained at client level only. and Address details are saved in LFA1 and ADRC table.
    Suppose you are having 4 compnay codes , create XXX vendor for one compnay codes and Extend it to different company code same  adresses.
    System will not allow to change adreess for individuly. better create 4 different codes and address
    Regards
    mahesh Naik

  • Vendor Master Address

    Hi,
    We have uploaded , vendor master . Now we need to upload Address data for eg House Number 1 and 2. For the same, I am using ADRMAS ,the house numbers are getting updated but the other fields for eg NAME1,CITY,STREET,POSTAL CODE are all blanking out ie. they are getting intialised.
    Does anyone know how to solve this problem.
    Regards,
    Priti

    hi
    the segment E1BPAD1VL of ADRMAS will hold all your requested details..
    Check whether you have maintained those details for the vendor...
    Cheers,
    Hakim

  • Time zone in Vendor master address

    Hi
    Our client is sending some data with the message type ADRMS. It contains the valueof Time zone also.
    But when we display the vendor through transaction XK03, it does not show the value of time zone in address view.
    Could you all please help me that where we maintain the value of time zone in vendor master.
    Thanks & Regards
    Shilpi

    In vendor master in the Address view at street adreess you will find Time zone.just go to xk02 and if you still doesn't find then there you will find a More fields icon (a plus icon in a box).In it you will find it.it should be remembered that entry of country and region is must.
    If you still doesnot find then go to spro@financial accounting@accounts receivable and payable@vendor accounts@master data@preparation of creating master dat@define account group with screen layout@here double click on the vendor account group and further double click on general data.Again double click on address and check whether Time zone is suppressed and if suppressed then make it optional.
    regards,
    indranil

  • CDHDR does not capture the Tcode for vendor master address changes:

    Hi Guys,
    Wish you a happy new year.
    I have the problem to track the changes of the vendor master. I have a vendor master, which got changed by one user. If I look the change history, I can be able to see the change document number, old value and new value. based on that I used CDHDR table to find out the TCODE which is used for this change, but found no value in the TCODE field. What is the meaning of this? Is it meant to say that this field is updated by other sources other than direct changes (XK02/MK02)? If such a case, is it possible to find out the program or LSMW or BW, etc...which is used for this change?

    >
    Smart Sometimes wrote:
    > do we have the option to search the changes based on the USER id for a particular date?
    Which userid? SCN or SAP userid?

  • Vendor master data load from flat file

    Hi Experts,
    I am trying to load data from flat file. I am confused which info object i should use. My requirement is for info cube 0BBP_C01.
    As i found for this info cube only two info objects are available: 0BBP_VENDOR and 0VENDOR. But in my flat file i have following fields: Vendor code, Vendor Name, Ultimate Parent, City, Country, Minority Status, Vendor Payment Terms. which all are together not present in either of info objects.
    Please suggest which info object i must use. or should i create Z info object for my requirement?
    Thanks in advance.
    Regards,
    Niranjan Chechani

    Hi Kiran,
    I am loading data through flat file. I am not getting your point like how to get attributes present in the R/3 system which I am not using in this case.
    Hi rvc,
    I have created two characteristics z info objects i.e. ZU_PARENT for Ultimate parent and ZVEN_PAY for Vendor Payment Terms.
    When i am trying to add these two as attributes and add it as Navigational attribute, I am getting the error "Characteristic 0VENDOR: The attibutes SID table(s) could not be filled" (Message no. R7586)
    Please suggest am i wrong somewhere?
    Thanks and Regards,
    Niranjan Chechani
    Edited by: Niranjan Chechani on Nov 28, 2011 12:15 PM

  • Vendor email address in IDOC

    We are trying to create a vendor payment file to be sent to our bank in IDOC format.   The IDOC type we are using is PEXR2002.   We are not able to populate the vendor email address (from vendor master data - SMTP_ADDR) into IDOC segment E1EDKA1 even though the email address is shown on the vendor master.   All other vendor master address information, such as Phone, Fax, show up correctly in that segment.   Does anybody know how we can populate the IDOC with the email address? 
    Thank you.

    Thanks, Ravi.   We are trying to avoid creating a user exit and since all the other vendor info populates the IDOC correctly, we're hoping there's a 'standard' way of getting the email there as well.

  • IDOC capturing the old data from Vendor master instead of modified data

    Hello Friends,
    Could you please guide me on the below issue  ?
    Vendor master was changed with the address being modified at 1300 system time.   => change log shows as 1300
    Payment run and IDOC generation ( RFFOEDI1 ) was executed at 1400 system time.  =>  IDOC created time as 1400
    but  , Still the  IDOC captured the old vendor master address data onto the IDOC .
    this is very strange to me and no idea how this can happen.
    thanks
    Raghu V
    Edited by: Raghunandan Vasudevarao on Jan 27, 2011 11:29 AM

    Moderator message: I am sorry but I had to remove the "correct answer" as it was not correct.
    It is well possible to remove the purchasing view via archiving, since archiving of vendor masters is divided into 3 activities: archiving purchasing view, archiving company code views, archiving general data.
    Of course there are preconditions: you cannot archive purchasing data view if you had already created orders. In that case you have to archive the orders first.
    See the network graphic,  in SARA enter object FI_ACCPAYB, then click the icon for network.
    In that particular case you would even create inconsistencies if you delete a table entry.
    And before you delete table entries you should in general know about the relationship of tables.
    Just thinking that a vendor master is LFA1, LFB1 and LFM1 is much to short. Goto DB15, enter FI_ACCPAYB (this is the archiving object) in the lower part and see how much tables are returned. These are all tables that can have data if you maintain a vendor master.
    Now check all those tables if they have a relation to LFM1 and if they contain data
    what will happen if you delete the vendor despite of existing orders? you probably get a dump when you access the purchase order.

  • Blocked vendor master (Ordering address) not considered in PO

    Hi Team,
    Recently we have upgraded our system to ECC6 from 4.6. After upgrade,
    the system is not considering the vendor master (Ordering Address) during
    Purchase Order creation if it is blocked at purchase org level under
    alternate data. Whereas it was picking in 4.6 system.
    Kindly provide the reason for such behavior and provide the solution if
    at all we want those blocked vendor codes to be considered.
    Thanks.

    Hi,
    Please try below SAP note for the same
    Note 1609717 - Vendors with blocked purch orgs are not replicated correctly
    Note 1607331 - Unassign a vendor from its Organizational unit
    Regards,
    Sandesh Sawant

  • Email address of contact person in Vendor Master

    Hi,
    I am trying to configure Contact person as a partner function. In P.O the user has to select the contact person at header level ,if there are multiple contatc persons in Vendor Master . Then in PO, the selected contact person name and email Id (which is mantained in conatct peson page of vendor master) has to be printed.
    In addition could please tell me the Table name of email ID of Contact person that is mantained in Vendor Maser?
    I tried with KNVK, ADr6 etc. but failed
    I would really appreciate your solution
    Thanks

    Hi,
    Vendor data should be in Central Address Management from 4.6c on...look at table ADRC with addressnumber from LFA1-ADRNR..
    Vendor Master report with address, telephone number & email ID
    Kuber

  • Address Change in Customer/Vendor Master upon creation or change Master

    Hi Expert,
    We need to change some Address  fields( *ADR6-SMTP_ADDR , ADRC-DEFLT_COMM, KNA1-TELTX, KNA1-TELX1*) in Customer Master based on some condition while creation/change the Master Data. I need to do same fields in Vendor Master as well. 
    I tried all the Possible exit Here.
    If you know a Proper exit /BADI or one possible solution to solve my problem?
    If anyone can provide any BAPI name which is used to Modify any customer/Vendor address will be very much helpful as well.
    Thanks in Advance for your help.
    Suman Adhikari

    Hi Kesav,
    For customer  BAPI_"CUSTOMER_CHANGEFROMDATA" and "BAPI_CUSTOMER_CHANGEFROMDATA1" both Sales Organization is a required filed. Here we need to change some fileds(standard communication filed , Customer Email address, and Telex No)  based on telex filed of customer for Customer irrespective of Sales Organization or any other constraints. The same requirement is for Vendor as well. If there is any proper exit/badi where KNA1 and address structure ADRC,ADR6 etc are available that will we good.
    I just need to modify some address fields for customer as well as vendor. If there is any BAPI for change address(customer/Vendor) then that will also be helpful.
    Suman Adhikari

  • Vendor Master report with address, telephone number & email ID

    Dear All,
    Kindly provide to me T Code for Vendor master report along with vendor address,Telephone number & email ID.
    Krajesh

    Hi Rajesh .... in case customer require specific information, you can also try using sap queries (trust me it is not as difficult as it sounds but the results are just great ;-):
    queries
    Table SZA1_D0100 have the following fields
    SMTP_ADDR (E-mail Address) ; TEL_NUMBER ; MOB_NUMBER ; FAX_NUMBER
    For address check table ADDR1_DATA
    Common join should be Vendor among these 2 tables
    Hope this helps !!!
    Edited by: m_n_novice on Aug 7, 2009 11:08 AM

  • Update email address in vendor master using report RPRAPA00

    Hi All ,
    My requirement is to update email address in communication tab of vendor master .
    There is one report RPRAPA00 running in background to update vendor master except email .
    I could not able to see anything to update email address in user-exits available in report RPRAPA00.
    Is there any way to update email address using this report or any alternative way .
    Please help .
    Thanks and regards ,
    Sijin KP.

    You can use a couple of function modules from function group SZA0 to update the email address.
    Attached is a simple test program that inserts a new email address for a vendor whose address number is known (from LFA1-ADRNR):
    DATA: comtab TYPE STANDARD TABLE OF adsmtp WITH HEADER LINE.
    comtab-consnumber = '001'.
    comtab-flgdefault = 'X'.
    comtab-smtp_addr = 'email_address_comes_here'.
    comtab-dft_receiv = 'X'.
    comtab-valid_from = '00010101'.
    comtab-valid_to = '99991231'.
    comtab-updateflag = 'I'.
    APPEND comtab.
    CALL FUNCTION 'ADDR_COMM_MAINTAIN'
      EXPORTING
        address_number                       = '0000141306'
        table_type                           = 'ADSMTP'
      TABLES
        comm_table                           = comtab
    EXCEPTIONS
       parameter_error                      = 1
       address_not_exist                    = 2
       internal_error                       = 3
       OTHERS                               = 4
    IF sy-subrc NE 0.
      WRITE sy-subrc.
    ELSE.
      CALL FUNCTION 'ADDR_MEMORY_SAVE'
       EXCEPTIONS
         address_number_missing       = 1
         person_number_missing        = 2
         internal_error               = 3
         database_error               = 4
         reference_missing            = 5
         OTHERS                       = 6
      IF sy-subrc NE 0.
        WRITE sy-subrc.
      ENDIF.
    ENDIF.

Maybe you are looking for