Vendor master Error

hi....
when i create a vendor in xk01 than sytem showing a msg,and the name of vendor is found not complete .
"The use of the last 5 characters in field NAME1 is restricted (36 of 40)"
what the solution for it?
Thanks & Regards
Rekha sharma

This would be a Warning Message only. You Can Proceed.
In some scenarios, the system only uses the first 35 characters of name fields, of the fields 'Street', 'City', 'District', as well as the first 10 characters of the field 'Search Term 1'.
These cases are:
ALE: the address data can only be transferred with 35 characters (search term 1 only 10 characters) in the case of some ALE message types (IDOC types) for reasons of compatibility with other releases and components. The message types in question are:
DEBMAS
CREMAS
DEBCOR
CRECOR
The problems do not occur if the relevant address data in IDOC ADRMAS is sent in each case, together with these message types.
EDI: the address data can only be transferred with 35 characters (search term 1 only 10 characters) with the standard UN/EDIFACT for reasons of compatibility.
Print: addresses are formatted with only 35 characters in some print forms for standard envelope windows. If the address number is in the address output structures, you can output the address fields in full length in forms. (See OSS note 145753 for FI forms.)

Similar Messages

Vendor master error - Postal code ??

Hi experts
I have tried to creat import vendor , not able to create .
Its throwing error like . "In Postal code a space must replace 5
Message no. AM207"
Can anybody tel me how to rectify this , this vendor is for netherlands.??
Some body Tel me what mught be the problem??
Thanks
SAP_MM

the checking rule is defined by SAP, following the country specific rules for their address and postal code layout.
It is mainly used to check the entries made at vendor master, customer master, delivery address, plant adress etc. maintenance.
But interfaces to external systems like VERTEX (just an example, not valid for NL, but other countries like USA have as well specific checking rules) rely on accurate entered postal codes.
If you get business letters from a customer or vendor from NL, then they have usually printed the postal code in the right fashion, you just need to type it like it shown to avoid an error coming from the checking rule.

Minimum order value in vendor master - error message in SRM

Hello!
I am using minimum order value in ERP for some vendors and I am wondering if is it possible to get the same error message in SRM.
While creating a shopping cart in SRM if the minimum order value is not reached, the following document created is a purchasing requisition.
I would like to get the error message that the minimum order value is not reached instead of the automatic creation of a purchase requisition.
Is it possible?
Thanks in advance!
Best regards,
Karin

Hi Karin, if you need to show an error message during Shopping Cart creation you willl need to implement badi BBP_DOC_CHECK_BADI, and maybe create an RFC Function Module to check in ECC ir the minimum order value was reached or not and show the error message.
In order to control the following document you will need to implement badi BBP_TARGET_OBJTYPE.
Find bellow a sample BBP_TARGET_OBJTYPE - Code Approach.
Hope This Help.
Celeste

Error in ALE Service While Creation of Vendor Master

hi,
I am using a scenario where a third party system is sending vendor master data to a R/3 system The file is picked up by the file adapter(sender) and mapped to IDOC format, using Idoc adapter (receiver). A Vendor is then created by posting the CREMAS03 IDOC into the R/3 system.
Everything goes fine till the Idoc comes into the R/3 system. There in BD87(Idoc Status Monitor), getting the "Error in ALE Service" error. When expanded further the specific error is that of "Cross-system company code xxxx does not exist". What is generally the cause of this error and how would I resolve it?
For those of you who have attended TBIT 40, this scenario is Example 1 - Creation of Vendor Master Data.
Any help would be appreciated?
regards,
SK

one more thing
if you want to be sure that you're using the right data
try to set your system to send the vendor data out
first - send it from BD14
and then you'll know which fields do you need
if you do that take a look at segment E1LFB1M
and check for BURKS
Regards,
michal

Error Message WY 030 . Vendor master creation

Hi all
The Error Messgae *WY 030 :Purchasing organization &1 assigned to company code &2, not &3*:+ Need to activate as a ERROR MESSAGE.+
During Vendor creation ,if the wrong purchase organisation is selected, system is allowing to create the vendor master.
Even though ,I have done the Setting in the following , the error message is not reflectiog
1. Message Control for Vendor Master Data
2.T.code : OBMSG
3.T.code : OBA5
Thanks & Regards
DP

strange.
in my system WY 030 message is this: Entry & in table & does not exist
what do you call a wrong purchasing organisation?
I guess you have several organisations in the system.
lets make an example:
purchasing PORG1 is assigned to company code CC1
purchasing PORG2 is assigned to company code CC2
purchasing PORG3 is assigned to company code CC3
and I guess
you want prevent a user to create a vendor master with company code CC1 and purchasing org PORG2
You just cannot do this.
All company codes are valid and all purchasing orgs are valid.
It is just to combination that would logically not make sense while creating.
but if this vendor is used in all companies, then you have 3 CC views: for CC1, CC2 and CC3,
and you have 3 purchasing views for PORG1, PORG2 and PORG3
would you still say that a vendor master with CC1 must not have PORG2 ?

Signature error while attaching document in vendor master

Hi
While attaching word docuemnt in vendor master through"Store business document" option, I am getting below error
HTTP Error: Signature verification failed :No valid signature
Could you please how can we avoid this error so that the document will get stored successfully
Regards
Subbu

Resolved.
Filename path was not correct.

Error while Importing Vendor Master records

I get the following error when importing vendor Master records into the MDM repositorry
Cannot import qualifiers because the qualified lookup field is not mapped.
I noticed that the file I'm importing contains 1000 vendors. However the qualified lookup table "PHONE" for the vendors contain only 388 records.
After I imported the records I found that there was only 389 records in the repository.
I'm using standard map provided by SAP.
I ran the import again but this time I unmapped all fields for the qualified update.
Now the Import Manager uploaded the remaining 613 records.
I would like to know whether how I can load 1000 records in one load rather than having to go through the file twice.
This is important since I want to use the import manager server for my loads.
Thanks
manoj

Hi Manoj,
Try the following options.
1. In the Import Manager, Select Configuration->Options
set <b>"Merge qualified links using matching qualifiers value to Off"</b>
2. In the Map Fields/Values tab in Import manager, select the qualified field in which you are trying to import, right clik on the field->select Set Qualified Update -> Update -> Select All available qualifiers into Matching qualifiers->
New Links- Create
Existing Links -> Update (All Mapped Qualifiers).
Hope this should solve your problem.
Thanks and Regards
Subbu.

Error while creating vendor master (xk01)

i am trying to create a vendor master in t.code
xk01, using standard objects, ie company code
R300, purchasing org- R300, account group---LIEF.
In address screen, i entered country as US,
system is giving an error
*Communication error with the external tax system (VERTEX_MS0018)
Message no. TAX_TXJCD864*
pls give me a solution as soon as possible.
rewards assured.

Dear Pavan,
Check the input tax settings have been done in your tax procedure with related to the country US.
I hope it will help you
Regards,
Murali.

Error while replicating vendor master data from R3 to SRM

Hi,
I am trying to replicate Vendor master data from the R3 system to SRM system(7.0) for the first time and am facing the following error :
Organizational unit 50000004 does not exist; check entries
Message no. BBP_BUPA034
I have gone through the other posts with similar issues but haven't been able to find a solution.
Any ideas?
Thank you.

hi sahlini
did you create a vendor organisation structure via PPOCV_BBP ? SINCE YOU REFER THIS NUMBER 50000004 WHAT IS THIS?
BR
\MUTHU

Error in the LSMW for vendor master using standard batch/direct input

I am facing the problem in the LSMW for the Vendor master data. The vendor is initially created for the company code 350 by using LSMW. NOw when I try to uploasd the same vendor using the same LSMW for the company code 450 then I get the error in the Bach input creation as follows:
Batch Input Interface for Vendors
FB012                    Session 1 : Special character for 'empty field' is /
FB007                    Session 1 session name VNDR_CREATE_ was opened
FB104                    Trans. 2 XK01 : Acct already exists; general area not being processed
FB125                    ... Data in table BLFA1 cannot be processed
FB016                    ... Last header record ...
FB014                    ... BLF00-STYPE 1
FB014                    ... BLF00-TCODE XK01
FB014                    ... BLF00-LIFNR 300951
FB014                    ... BLF00-BUKRS 402
FB014                    ... BLF00-EKORG /
FB014                    ... BLF00-KTOKK VEND
FB017                    ... Last data record ...
FB014                    ... BLFA1-STYPE 2
FB014                    ... BLFA1-TBNAM BLFA1
FB014                    ... BLFA1-ANRED /
FB014                    ... BLFA1-NAME1 SAVOIE AUTOMATISME DEXIS
This is because when we use XK01 to create the vendor by using the

Please check this answered link:
Re: LSMW for Vendor Master
LSMW Upload vendor master data
Edited by: Afshad Irani on May 5, 2010 12:42 PM

Run time error while create Vendor master via MK01

Dear Experts,
when i try to create vendor master by MK01.....system throws run time error as below:
"The exception 'CX_BADI_MULTIPLY_IMPLEMENTED' was raised, but it was not caught
anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CVI_MAP_TITLE=================CP' has to be
terminated."
My current system is ECC 6 along with DBM. Business partner configuration is activated in the current system. I am getting this error after BP configuration. Could you please help me to fix this issue?.......Is it due to configuration or a dump from abap program?
Regards
Vetrivelan

Hii,
please search sdn before posting the threads.
check these links, it may help u............
Short Dump - CX_BADI_MULTIPLY_IMPLEMENTED - BADI Q1SR1
Short Dump - CX_BADI_MULTIPLY_IMPLEMENTED - BADI Q1SR1
CX_BADI_NOT_IMPLEMENTED
thanks.

Replication Error with Vendor Master Records

Hello,
We are trying to replicate vendor master records from R/3 to SRM via BBPGETVD. When we go to SLG1, there is an error stating Business Partner XXXX: Invalid Value 0003 for field Authorization Group.
Currently, the AP dept. maintains the field Authorization Group in the Vendor Master Record 'Control' screen with a fixed value of 0003 (LFA1-BEGRU). When the replication occurs, SRM complains that this field value does not exist in a SRM customizing table or is a fixed value.
Do we need to implement the BBP_TRANSDATA_PREP BAdI to pass this value as a fixed value to replicate vendors?
-regards
Shaz Khan

I'm planning to implement bbp_transdata_prep. Wondering if either one of you can help. I've also opened another thread with my specific questions.
Replication Error with Vendor Master Records

Vendor master data error - check issue manueal

Hi all,
i got the following message when i create vendor master data, same message as error when i try to post manual check.
" Changes for vendor 500011 not yet confirmed
Diagnosis
The change to sensitive fields of vendor 500011 have not been confirmed yet.
Procedure
You can confirm the change with transaction FK08."
could any one give me the solution ple
thanking you

Dear,
If the "sensitive field for dual control(vendor) " is defing in IMG under "preparations for creating vendor master data, then when you creating the vendor master data, the confirm is necessary. the responsible person could help you to confirm it via FK08.
With Best Regards,
Gladys Xing

Vendor Master Replication-getting error message

Dear SRM Gurus,
Currently I am using SRM 5.0 and ECC 6.0. I am trying to replicate the vendors from ECC system using BBPGETVD for initial download.
I am getting the error message "*_All backend descriptions are already assinged in the system".*_
I checked in SLG1 tcode even i couldn't find any log entry.
I created root orgnisational unit using ppocv_bbp and same object id i am using for replication.
I am not sure but i believe i have maintained all the necssary settings.
Can you please give me the solution.
Thanks for your help
Ravi Nagandla

Hi Muthu,
I maintained below settings for number ranges in both the systems.
In ECC:
Spro->Logistics general->Busines partner->vendors->define number range for vendor master records
No   From number   To number      Current         Ext
01   0001000001     0001999999     1004422
In SRM:
SPRO-> supplier relationship management->srm server->cross application components->number ranges- Define Number Ranges for Vendor List
No   From number   To number      Current         Ext
01   0001000001 0001999999     1004422
Should I check u2018EXTu201D checkbox in any of the system.
Please check above settings and please guide me.
Thanks
Ravi

ERROR : Output - No details for medium PRN im vendor master record

While trying to create PO after applying sourcing to a shopping cart the following error message apears in our system currently
Output: No details for medium PRN im vendor master record (Document Number 1000000295 , Item 1)
Could anybody depict the solution pl ?

Hi
Which SRM version are you using ?
Please go through this ->
In PPOMABBP, your purch org must be defined under (or at the same level as) a company. This company org id (defined in function tab) will be used to read address and use it as "contact" addresse._
PO output
Reg Output medium in Purchase order.
Also, try adding a default printer in the organizational plan (PPOMABBP) or to add a printer in the BP address._
You can look at transaction bbp_po_action_def to understand how it is done for setting output medium.
+Look for BADI "BBPSEND_MEDIUM_MODE ".+_
Related links ->
Re: How to define a new "send medium" for a vendor?
SRM PO's to be printed out with the PO
To set Output type,check the foll path:
SPRO->supplier relationship management-> SRM Server->Cross application basic setting->set output action and output format
See the foll link for more details:
http://help.sap.com/saphelp_srm50/helpdata/en/91/41faf2c220e84c9002a4ae4cc1906a/frameset.htm
Related notes:
Note 1028388 - User settings for output medium is not saved.
Note 885593 - SRM 5.0 SP02: Incorrect output medium and change impossible
Do let me know.
Regards
- Atul

Vendor master Error

Similar Messages

Maybe you are looking for