Ver.5.0.1.exe does not install even if all firefox prog. are closed

on installation process, the install popbox says checking existing programs after which another popbox says close all firefox programs before installation....
I have closed all applications and programs prior to installation of the downloaded ver 5.0.1.exe but only this took up my time and nothing happened
mary elizabeth

Well, the behavior I described is now intermittent. Sometimes I can open a new window and sometimes I can't. If I can't, command-Tab does nothing. So far I've found no consistent circumstances under which I can or can't open a new window.
Originally I was running computationally intensive program that required 3.35 days to complete its run. When the run was over the Firefox problem disappeared - for awhile. Then the problem recurred in the intermittent fashion I've described.

Similar Messages

I am using final cut express. It seems that any clip over a certain length, say 5 min, does not fully transfer! All shorter clips are perfectly fine. Is there some reason why longer clips are not fully transferred? (a half blue circle shows up on the tran

I am using final cut express 4. It seems that any clip over a certain length, say 5 min, does not fully transfer! All shorter clips are perfectly fine. Is there some reason why longer clips are not fully transferred? (a half blue circle shows up on the transfer list, indicating that the clip was not fully transferred. When I check in the capture scratch folder, sure enough the whole clip is not there!
Is there some glitch in final cut express that only allows short clips to be transferred in full?

Thanks for the reply. I'll try to answer all the questions (I am a relative novice). Your help is appreciated.
By the way, the other reply I received suggested the following:
In Final Cut Express>System Settings>Scratch Discs make sure the Limit Capture/Export File Segement Size To: is not checked.
I did this and it was already unchecked. So this is not the answer...
The strange thing is, I have been logging and transferring with FCE for 2 yrs without any problems at all with shorter clips, but have come up against the problem with long clips (over 5 or so min) the whole time. I got around it by simply making sure I stopped recording after less than 5 min while shooting footage. OR if I accidentally got a long clip, I import into imovie and then import into FCE. Not very streamline and I worry about compressions altering quality!
I am now trying to import a 20 min and a 17 min clip and it only transfers around 3 minutes of each, I have re-tried several times and it happens repeatedly. The blue circle in the transfer list shows up as a half blue circle instead of full. Clip cuts off after 3 or so minutes.
ANSWERS
how you are ingesting the files
From external flash drive connected directly to mac using FCE.
the format of the source footage
digital via ext flash memory. Frame size :1929X1080 / 25fps
what camera shot the footage
SONY HXR NX5
how you are connecting to the computer
from flash memory directly via usb
what version of FCE you are using
4
what OS your computer is running
10.6.8
what model Mac
macbook Pro intel Core i7
what drive you are using for Capture Scratch
3TB external drive (plenty of room left)

Acrobat X Pro does not install PDF toolbar in Firefox, but does in IE. How to fix?

Also, I see that Acrobat X Pro does not install all plugins. There are several that I want shown as not installed. But how can I get these installed, as there is no button to say "install this"??

Got a partial fix - In Firefox, the Adobe PDF Toolbar gets installed in "Disabled" mode. To enable, go to "Tools->Add-ons->Extensions", select "Adobe Acrobat - Create PDF" and enable it.
Now, as for the rest of the Acrobat plugins, I'm still trying to find a way to enable them. Any ideas?

Java_app_platform_sdk-5_07-windows.exe does not install

Recently I updated jre to build 1.6.0_13-b03, and wanted to update platform sdk from 5.06 to 5.07. However, I can not continue on the installing progress page "Select Installation Directory". I pressed "next" but nothing happened. I tried uninstalled jre and cleaned up it, then installed jre, but I still get stucked at the "Select Installation Directory" page of platform sdk installing progress.
Anybody knows how to fix that problem? Thank you.

I have found this page (http://osdir.com/ml/java.netbeans.j2ee/2007/msg01651.html), where they are talking about
a possible solution to my problem, but I am not sure at all. I can change my Windows Vista administrator name,
Jos�, by localhost. I guess GlassFish does not work with this tag
<jms-service addresslist-behavior="random" addresslist-iterations="3" default-jms-host="default_JMS_host" init-timeout-in-seconds="60"
reconnect-attempts="3" reconnect-enabled="true" reconnect-interval-in-seconds="5" type="EMBEDDED">
<jms-host admin-password="admin" admin-user-name="admin" host="*Jos��1*" name="default_JMS_host" port="7676"/>
</jms-service>I have tried to put localhost as the conversation recommend but GlashFish does not work as well. I think I am getting closer to the solution.
Any idea?
Thx
Jos� �lvarez de Lara (Oggie)

I have downloaded Firefox 5.0 at least three times and saved file, but I don't know how to install and run. It keeps asking me to download new version and Save file. I'm in a never ending loop, it keeps downloading same exe & does not install Please Help

Please tell me how to install and run new Firefox 5.00 after I have downloaded the new version and chosen Save File. I just go into Loop and screen says new version available and download again !

Did you ever resolve the iCloud problem.I am in the same position and its driving me mad!!! If you have a link to an solution I would appreciate it.

My roboform (ver 7.5.7) toolbar does not show since i updated firefox to 7.0.1 in the troubleshooting info. it shows as enabled. it does not appear in the menu of view/toolbars

as above, when i updated firefox to 7.0.1 the toolbar for roboform disappeared. updating roboform did not fix it. it does not show up as a tool bar in the view/toolbar tab. i made sure the firefox browser option was enabled in roboform.

Try to read raq here;
* http://www.roboform.com/support/faq/roboform#toolbar

HT201269 itunes cannot see my iphone backup. I have a backup of the backup on an external HD, but even tech support cannot figure this one out. I copy and paste backups into the correct folder but itunes still does not see it. All I need are my contact

Sorry for short novel I am writing. I just wanted to cover as much backround as possible.
So, here it goes. I backed up my iphone 4 after renting a movie. The movie only played the starting credits before I was called on for daddy duty. A few days later the movie would not play, so I restored my phone from my backup. The movie would still would not play so itunes support refunded my purchase and ended my viewing privileges for that rental after verifying that I had not viewed the movie. I then had a problem with my contacts showing up twice in the contacts list after the restore. So I attempted another restore. All was well at this point. I then started having trouble with my pc and decided to copy the internal drive to an external source. A week later I had a system failure and did a factory restore on my computer. I re-installed itunes and tried to copy and paste the old backup into the new itunes. Now itunes just flat out does not see the backup file (I failed to mention that I did a factory reset on the iphone after the last backup, hopping to start fresh). Tech support had me uninstall and re-install itunes and then copy and paste the old backup into the newly installed itunes with no luck. The files are all there, but itunes just doesn't see them (itunes says the device has not been backed up to the cloud or to the local machine). We then tried backing up the factory restored iphone and replacing that restore file with one of my old backups on the external drive. Ok, this is where it gets weird. We replaced the guts of the folder but left the folder itself so itunes would continue to recognize the new backup folder with the old files. Whoohoo, itunes now see's a backup folder full of old files, or so we thought. The new files were deleted using shift delete so they would be gone for good and not mix with any files or folders. When I restore my phone, it restores the files that were deleted from the restore file (pause here for a moment and imagine the stupid look on the face of tech support and I while we silently wonder how files that were permanently deleted were restored). This left tech support and I both scratching our heads. My service issue was escalated to the next level. I waited for the phone call the next day that was scheduled at 10am to my wife's phone, but the call never came through. As usual, apple disappoints again. I just bought an iphone 5s and still have the iphone 4, and am looking for a solution to retrieve my contacts and restore to the 4 or 5s. I am guessing that files in other folders must be associated with the iphone backup in order for itunes to retrieve the files. Any ideas or support in retrieving my contacts would be greatly appreciated.

Sorry for short novel I am writing. I just wanted to cover as much backround as possible.
So, here it goes. I backed up my iphone 4 after renting a movie. The movie only played the starting credits before I was called on for daddy duty. A few days later the movie would not play, so I restored my phone from my backup. The movie would still would not play so itunes support refunded my purchase and ended my viewing privileges for that rental after verifying that I had not viewed the movie. I then had a problem with my contacts showing up twice in the contacts list after the restore. So I attempted another restore. All was well at this point. I then started having trouble with my pc and decided to copy the internal drive to an external source. A week later I had a system failure and did a factory restore on my computer. I re-installed itunes and tried to copy and paste the old backup into the new itunes. Now itunes just flat out does not see the backup file (I failed to mention that I did a factory reset on the iphone after the last backup, hopping to start fresh). Tech support had me uninstall and re-install itunes and then copy and paste the old backup into the newly installed itunes with no luck. The files are all there, but itunes just doesn't see them (itunes says the device has not been backed up to the cloud or to the local machine). We then tried backing up the factory restored iphone and replacing that restore file with one of my old backups on the external drive. Ok, this is where it gets weird. We replaced the guts of the folder but left the folder itself so itunes would continue to recognize the new backup folder with the old files. Whoohoo, itunes now see's a backup folder full of old files, or so we thought. The new files were deleted using shift delete so they would be gone for good and not mix with any files or folders. When I restore my phone, it restores the files that were deleted from the restore file (pause here for a moment and imagine the stupid look on the face of tech support and I while we silently wonder how files that were permanently deleted were restored). This left tech support and I both scratching our heads. My service issue was escalated to the next level. I waited for the phone call the next day that was scheduled at 10am to my wife's phone, but the call never came through. As usual, apple disappoints again. I just bought an iphone 5s and still have the iphone 4, and am looking for a solution to retrieve my contacts and restore to the 4 or 5s. I am guessing that files in other folders must be associated with the iphone backup in order for itunes to retrieve the files. Any ideas or support in retrieving my contacts would be greatly appreciated.

Execution does not end even after all records updated..

Hi,
I have plsql code like :
declare
begin
for x in ( select .......) loop -- about 4000 times
for y in ( select ............) loop -- about 50 times
end loop;
-- some code goes here to manipulate clob data
-- like creating free temp clobs - use - then free them
-- Update statement that update some table using clob values.
insert into tablex values(sysdate);
commit;
end loop;
end;
Here I can monitor from other window howmany records are inserted into tablex and howmany updated in update statement by...
select count(1) from tablex;
After 50 mins i can see that all records are updated but...
plsql code does not end its execution it continues even after all records are updated..untill i have to kill the session or let be run for long time.. :(
I can not understand why this it is not ending execution..
What could be the problem ...

Hi,
Here it is.....
declare
v_text_data TableA.text_data%type;
v_clob clob;
type dummyclob_t is table of clob index by binary_integer;
dummyclob dummyclob_t;
v_str varchar2(255) := 'ddfsajfdkeiueimnrmrrttrtr;trtkltwjkltjiu4i5u43iou43i5u4io54urnmlqwmreqwnrewmnrewmreqwnm,rewqnrewqrewqljlkj';
begin
select data bulk collect into dummyclob from sfdl_clob; -- five rows containing clob data upto 1MB
for x in (select object_id
from TableA
where object_type = 'STDTEXT' ) loop
dbms_lob.createtemporary(v_text_data,TRUE);
for y in (select '<IMG "MFI_7579(@CONTROL=' || ref_id || ',REF_ID=' || ref_id || ').@UDV">' temp_data
from TableB
where object_id = x.object_id) loop
v_text_data := v_text_data ||
case
when trunc(dbms_random.value(0,7)) = 0
then chr(10)
else v_str
end ||
y.temp_data;
end loop;
select text_data into v_clob from TableA where object_id = x.object_id for update;
if v_text_data is not null then
dbms_lob.append(v_clob,v_text_data);
end if;
dbms_lob.append(v_clob,dummyclob(trunc(dbms_random.value(1, 6))));
dbms_lob.freetemporary(v_text_data);
insert into xyz values (sysdate);
commit;
end loop;
end;
Thanks for your time..:)
Rushang.

I am trying to update firefox. it dowloads just fine. It will not install. Says that firefox must be closed in order to continue. it is closed.

I was able to use Firefox until today. it will not open. i tried to update it. It downloads a newer version just fine. WhenI try to install it, it says to close firefox. Firefox isnot open. I also tried to unistall it and it won't let me.

Hi kshikuma. This happens to me sometimes, as well.
To solve this issue, open the Windows Task Manager by hitting Ctrl+Alt+Del.
Go to the "Processes" tab and see if a process named "firefox.exe" or "plugin-container.exe" is opened. Close any and all such processes by right-clicking them and selecting "End Process".

Acrobat Pro 7.0 does not install on Windows 7, how can I get a version that does?

I recently downloaded and tried installing the non-activation version of Adobe Acrobat Pro 7.0 on my Windows 7 PC. After researching the installation error I read some posts that Acrobat 7.0 does not install on Windows 7. What are my options?

AA 7 will install, but it will not run very cleanly. A lot of things require workarounds. However, it is strongly recommended that you upgrade to AA XI for use on Win7 or Win8. AA 7 is not fully compatible and playing with workarounds is not a great use model. Looks like the price just came down also. You will have to purchase the full version. The upgrade version requires at least AA 9.

JControl.exe does not start...Database Initialisation Problem...MS SQL

Hi,
I was wondering if anyone has any idea on why JCONTROL.exe does not start. I am currently installing NW04s EP7. The DB is on another host and te SCS and CI are on a different host. I am going throught the installation when I get the following error fro the Bootstrap file.
I have already done the following steps:
1. entered the SAP<SID>DB password
2. SQL is started and running on the second host.
3. The bootstrap.propeties files look the same as any other file EP system on our network
[Mar 7, 2007 5:32:35 PM ] [Bootstrap module]> Problem occurred while performing synchronization.
[Mar 7, 2007 5:35:45 PM ] -
[Mar 7, 2007 5:35:45 PM ] Bootstrap MODE:
[Mar 7, 2007 5:35:45 PM ] <INSTANCE GLOBALS>
[Mar 7, 2007 5:35:45 PM ] determined by parameter [ID0117060].
[Mar 7, 2007 5:35:45 PM ] -
[Mar 7, 2007 5:35:46 PM ] Exception occurred:
com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties!
     at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:422)
     at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
     at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
==[ Caused by: ]==----
com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred: Secure Store lib Dir does not exist
PC04315\sapmnt\ET1\SYS\global\security\lib\tools
     at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:212)
     at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:49)
     at com.sap.engine.bootstrap.Synchronizer.<init>(Synchronizer.java:60)
     at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:419)
     at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
     at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
[Mar 7, 2007 5:35:46 PM ] [Bootstrap module]> Problem occurred while performing synchronization.
Many thanks,
Adil Zafar

==[ Caused by: ]==----
com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred: Secure Store lib Dir does not exist
PC04315\sapmnt\ET1\SYS\global\security\lib\tools
Do you have strong encryption on your current system?

I have PIXMA MG5320 and I am running Win 8. Software cd does not install. I want to scan, but havin

I have PIXMA MG5320 and I am running Win 8. Software cd does not install. I want to scan, but having trouble.
I insert USB stick into USB port on the printer.
I select SCAn and then select USB. I select " <i>" key. I do not find any data on the USB stick.
What gives?
I cannot install the software on Windows 8

Hi jvandal,
The CD that came with the PIXMA MG5320 does not include Windows 8 drivers and softare, so you would have to download the drivers and software from our website. Use the following steps to download the drivers and software:
Go to Canon's Support & Drivers website at:
http://www.usa.canon.com/cusa/support/consumer
Enter your model name into the Model Name field, then click GO.
Select your operating system in the Select Operating System and Select OS Version dropdown lists, respectively.
Expand the Drivers section by clicking the red triangle.
Click on the file named MG5300 Mini Master Setup.
After reading the details and disclaimer, click 'I Agree Begin Download' and save the file to your computer.
Once the download is complete, double-click the file from its download location to begin the installation.
Once complete, click the I Decline Go Back to return to the download page.
Expand the Software section by clicking the red triangle.
Click on the file named MP Navigator EX Ver 5.0.0.
After reading the details and disclaimer, click 'I Agree Begin Download' and save the file to your computer.
Once the download is complete, double-click the file from its download location to begin the installation.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Skype 7.2.0.103 Does not install

I kept getting a message to update Skype but when I tried, it told me I could not remove an old version and crashes. However and this is a method I have posted before. and I have now had to use again.
First I download the msi file direct, not sure if Skype alows it, because the download section says off limits, however this link will get you the MSI File
http://download.skype.com/msi/SkypeSetup_7.2.0.103.msi
And then you download the MSI extractor, free called lessmsi-v1.2.0 and extract the file to a folder.
Then you go to your program files and rename the Skype directory Skype Bak (just in case)
In the extracted folder you find the phone directory and copy it to your programs Skype directory, and delete everything in it except the cab file and the Skype.exe
And then your Skype exe will work with the latest version of Skype, no install failures.
If you're confident it is all happy, delete, or backup your Skype Bak folder

Latest download upgrade still does not install,
tells me older version 7.3 could not be removed, that is because I only had 7.2 and was trying to install 7.3
So back to the above instructions and use this link http://download.skype.com/msi/SkypeSetup_7.3.0.101.msi
And you can install Skype upgrade.

My downloaded Auditon 3 does not install.

After a disc crush I had to install all programs. My Audition installed from the CD but i could not activate it. From Adobe support in England I got another version that does not require activation. However it failed to install on my PC running Windows 7 ult 64-bit. The original version has worked fine on exactly the same PC but it seems that the activation server is not available anymore. All my other Adobe programs installed perfectly.
Does anybody have a clue of what to do?
/Peter in Sweden

Thank you for response!
Yes I downloaded from the lower link and that was no problem.
Today I uninstalled my firewall and virus ptotection and unplugged the Internet. I then started from scratch and klicked on the two exe files and chose storage place as suggested in the program. The installation seemed to start I checked the licens agreement and chose language. No asking for licens number popped up. After some time I could choose finish.
However I am unable to start the program. It is not visible under Start/all programs. However under Program x86 there is a folder with the new and correct foldername Adobe Auditon 3.0. In that file I cannot find any sort of exe file to start the program. I can find Audition 3 in the register on some places but it does not show up under "All programs" and neither under installed programs in the conrol panel. Insalling my Inernet protection which I installed after trying Audition shows up however.
I still do not know hot to continue. I also installed my old Photoshop in the same way and that worked without any problem.
Anybod has any suggestion?
/ Peter in Sweden

Help - Logic 8.0.2 update does not install

The Logic 8.0.2 Update does not install on my machine. The installer goes through the motions very quickly and my Logic Pro app still indicates version 8.0.1. Logic node, Waveburner, etc. all seem to have updated to the .2 version. After not taking with Software Update, I downloaded the updater and that didn't work as well. I have also tried trashing the appropriate Receipt packages (though there was no Logic 8.0.2 receipt). Any help would be appreciated!!
2x2.66 dual core Mac Pro, OSX 10.4.11
Michael

Thanks for your help, Erik. I just got off the phone with Apple support and the solution was dumber than dumb: somewhere along the line Logic Pro was renamed "Logic Pro 8" to distinguish it from ver. 7 still on my system. Renamed it "Logic Pro" and voila, the installer recognizes it!
"mistakes were made..."
Michael

Ver.5.0.1.exe does not install even if all firefox prog. are closed

Similar Messages

Maybe you are looking for