Verizon's iPhone 4S is dropping the first call almost all the time?

Hi.
I have a verizon iPhone 4S.
Everytime I make the first call to someone, I don't hear anything.
When I end that call and try calling again, it works.
This has been happening almost all the time.
I tried letting the phone app turned on but it doesn't solve the problem.
I'm not sure if other carrier's iPhones are having this problem.
Does anyone know what the problem is to this?
Thank you very much.

I tried letting the phone app turned on but it doesn't solve the problem.
What does that mean?
Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
If still a problem, restore.
If still a problem, take it in to Apple for a warranty replacement.
IMO, you'll probably end up taking it in to Apple but the other steps are worth trying.

Similar Messages

When receiving an call waiting can't push the hold and answer button.Because: it will put on hold the first caller, answer to the second, but you can't hear the second until you end the first call !!! Anyone has the same problem ? Did anyone know why ?

When receiving an call waiting can't push the hold and answer button.Because: it will put on hold the first caller, answer to the second, but you can't hear the second until you end the first call !!! Anyone has the same problem ? Did anyone know why ?

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Knows someone why my iphone 5 is shuting down by itself, almost all the time?This is happening to me since I updated to iOS 6.1.3!

Knows someone why my iphone5 is shutting down by itself for no reason, almost all the time?...
This is happening to me,since I updated the iOS 6.1.3.
Please!!! Someone??!!!

If no change after restoring the iPhone with iTunes from the iPhone's backup first followed by restoring as a new iPhone or not from the backup, make an appointment at an Apple Store if there is one nearby.

I tried to change the photo on the first page and all the photos seam too big. Why

Hi
I upgraded my iPone 4 to ios 7. on the front page, the clock and date appeared on the photo I have there. I edited the photo so it will be less aide and less high and tried to put it on the front page (the page before the home page). the photo was suddenly huge and did'nt match the size of the screen. Why?
How can I put the old photo so it will match the size of the screen?
Will appreciate a detailed answer. (i am not an expert in computers...).
Tanks!

That's because you need to sign out of it on iTunes, and Facebook isn't integrated with your Apple ID so you will need to add your new email manually to your Facebook account.

My Skype crashes whenever I make the first call/re...

My Skipe crashes whenever I make the first call or receive the first call. Whether it be by skype to phone or from skype to skype.
I have to sign out from skype and then sign in again for every call I want to make.
Solved!
Go to Solution.
Attachments:
DxDiag.zip ‏15 KB

Please, run the DirectX diagnostics tool.
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

HT1689 I have trouble when I am talking to someone and I have a another call coming in - I can answer the other call but in the process I loose the connection to the previous caller that I was talking to

I have trouble when I am talking to someone and I have a nother call coming in - I can answer the call but when I want to go back to the original caller I get disconneted

From the iPhone User Manual:
Respond to a second incoming call:
Ignore the call and send it to voicemail: Tap Ignore.
Put the first call on hold and answer the new one: Tap Hold Call + Answer.
End the first call and answer the new one: When using a GSM network, tap End Call + Answer. With a CDMA network, tap End Call and when the second call rings back, tap Answer, or drag the slider if the phone is locked. If you’re on a FaceTime video call, you can either end the video call and answer the incoming call, or decline the incoming call.
Switch between calls: Tap Swap. The active call is put on hold. With CDMA, you can’t switch between calls if the second call was outgoing, but you can merge the calls. If you end the second call or the merged call, both calls are terminated.
Merge calls: Tap Merge Calls. With CDMA, you can’t merge calls if the second call was incoming.

DCIteratorBinding setting the same value for all the rows.

Hi all,
I have table with on of the column as id. I have made the id column as the hyper link , that takes me to the next page. I am trying to pass the id to the next page. I am using the managed bean for the same. The below code is used to create the link on the column. It sets the action to the function in the bean that sets the id as of the current row.
<tr:column sortProperty="id" sortable="false"
headerText="#{bindings.notification.hints.id.label}"
id="c4">
<tr:commandLink action="choice" text="#{row.bindings.id.inputValue}"
id="cl1" actionListener="#{IdBean.extractID}">
</tr:commandLink>
</tr:column>
below is the IdBean.extratctID()
public void extractID(ActionEvent actionEvent){
BindingContext bindingContext = BindingContext.getCurrent();
BindingContainer bindings;
bindings = bindingContext.getCurrentBindingsEntry();
DCIteratorBinding iter;
iter = (DCIteratorBinding) bindings.get("notificationIterator");
Row rw;
rw = iter.getCurrentRow();
String id;
id = (String) rw.getAttribute("id");
this.setId2(id);
I am printing the id value on to the next page. But its just returning the vslue of the id for the first row for all the rows of the table.
Any inputs as in do i need to refresh the iterator or something like that.
Reagrds
Sishant

Hi,
Following is the code i have added in my bean
ValueExpression expression = getFacesContext().getApplication().getExpressionFactory().createValueExpression(getFacesContext().getELContext(), "#{pageFlowScope.emp1}", Object.class);
Object id = expression.getValue(getFacesContext().getELContext());
public FacesContext getFacesContext() {
return FacesContext.getCurrentInstance();
JSPX Code -
<af:commandImageLink id="DuncanAngove"
icon="/john.gif" partialSubmit="true"
actionListener="#{Tweets.setEmployeeId}">
<af:setActionListener from="Duncan Angove" to="#{pageFlowScope.emp1}" />
But i am getting NullPointerException. I have tried it with application and request scope as well.
javax.servlet.ServletException
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:277)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:414)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.NullPointerException
     at org.apache.myfaces.trinidad.component.UIXComponentBase.getValueExpression(UIXComponentBase.java:231)
     at project1.Tweets.setEmployeeId(Tweets.java:40)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.sun.el.parser.AstValue.invoke(AstValue.java:157)
     at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
     at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1259)
     at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
     at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475)
     at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:698)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:285)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
     ... 35 more
Thanks
Sishant

How to quickly pick up a 2nd call and drop the first call

If I am on a phone call, and then a second call comes in, then how can I quickly pick up the second call and DROP the first call? I can do it if I put the first call on hold but then I have two calls going. If I simply END the first call, then it takes 5 or 6 seconds for the second call to come in. Several times I have lost the second call because it took too long to transition over.

never mind i did a direct chat with a skype rep and got my answer which is no.

CME - Second Call Drop the first call

Greetings,
Anyone ever seen something like this?
I get a call on my extension, and when I receive a call on another phone, the first call (in my Phone) drops.

I'm seeing this also with IPC softphone version 8.6.
Has anyone resolved this issue?

I uploaded 3 audiobooks from iTunes to my iPhone 5 with the latest ios7 on it. Each of them only plays the first 15 mins of the playback and then silence, the bar shows the book is still playing but no sound, any ideas? Thanks

I uploaded 3 audiobooks from iTunes to my iPhone 5 with the latest ios7 on it. Each of them only plays the first 15 mins of the playback and then silence, the bar shows the book is still playing but no sound, any ideas? Thanks

What happens when playing the same books in iTunes. Is there sound after 15 min?
If also silent in iTunes, check the info tab where you can see the item is an audiobook, etc. Check the volume bar, this normally is on the zero point.
When an audio book is really low in audio, I tend to move this to the plus side (+1=max), but for some strange reason this bar was at -1 in some books I had and they also seemed to play in absolute silence.

Had iphone 4 a week and it got dropped and theres a crack all the way down the screen, will you replace it?

iphone dropped only had it a week, got replaced because the power button broke. Now the screen is cracked all the way down the middle. Will i get a replacement?

We are users. Not Apple. If the phone is from a country where Apple offers an out of warranty replacement program, Apple will be happy to replace it for US$149.
Accidental damage is not covered by the warranty.

I changed from one iPhone to another and backed the first one up to the icloud. I have restored the content to my new iphone but cannot download the photos. Any advise will be greatly appreciated

I changed from one iPhone to another and backed the first one up to the icloud. I have restored the content to my new iphone but cannot download the photos. Any advise will be greatly appreciated

Welcome to the Apple Community.
Photos and some other items are added back after the restore has completed, you may need to wait a while.

IPhone 4s call waiting; how do I get back to the first call?

When I'm on a call and a second call comes in I tap "hold current call and answer." I get connected to the second call and the first call is put on hold. But when I am done with the second call, how do I get back to the first call? I can't find any way to get back to the call that is on hold. I usually end up hanging up on both calls. Not good.
Also, how do I switch back and forth between two calls? How do I put the second call on hold, go back to the first call to tell that person I must call them back, then return to the second call?

http://support.apple.com/kb/TA38607?viewlocale=en_US
Good Luck

HT201210 i have update and restore my wife iphone to 7.0.4 and i lost all the data what to do now? all contacts and kids photos goooone , we have the same apple ID and when i tried to restore from i cloude , i restored my contacts not her???!!!!!

i have update and restore my wife iphone to 7.0.4 and i lost all the data what to do now? all contacts and kids photos goooone , we have the same apple ID and when i tried to restore from i cloude , i restored my contacts not her???!!!!!

Looks like you restored your backup file to her phone. If you didn't back up your wife's phone first, then the data is gone, sorry.

Skype Windows client hangs for the first call - co...

Hi,
Skype on my Windows 8.1 (depending on its mood) hangs for the first call. It will keep ringing and ringing till it times out, during that time I am not able to hang up the call as well, the red hang up button doesnt work and we have to let the call go on till it drops on its own. Then on the second try it connects perfectly fine. This happens most of the times, there are only a few days where it connects on the first try otherwise its always the 2nd time.
Please let me know what could be the possible solution for this one?
Thanks

Hi Marcin,
This forum is mainly for talk about the product use related issue and not the best place to talk about the develop issue, for the develop issue we can post in MSDN forum for
the further help and your issue may need capture a dump then for the further analysis it is not an efficient way to work in this community since we may need more resources which is not appropriate to handle in the community. I‘d like to suggest that you submit
a service request to MS Professional tech support service so that a dedicated Support Professional can further assist with this request.
MSDN forum
https://social.msdn.microsoft.com/Forums/en-US/home
Please visit the below link to see the various paid support options that are available to better meet your needs.
http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone
Thanks for your understanding and support.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Verizon's iPhone 4S is dropping the first call almost all the time?

Similar Messages

Maybe you are looking for