Version 35.0.1 does not connect to network & nothing works

Upgrading from 32.0 for Windows 7 to 35.0. Downloaded and ran 35.0. It asked to close Foxfire which I did. Nothing happen nor does anything work. If you open it, nothing works. It can not attach even thou the network is available and other applications can connect.
It just sits there and tries to connect (icon in the left corner just spins and spins.
Do I deleted the version 35 and try reloading 35? I like Foxfire a lot and what it to work.

hi starbase, normally such issues are caused by a firewall/security software which doesn't recognize & therefore blocks new firefox versions. please remove all program rules for firefox from your firewall and let it detect the new version of the browser again.
[[Fix problems connecting to websites after updating Firefox]]

Similar Messages

Windows 8.1 windows explorer does not connect to network drives

I have a network drive (SAN) on my local network which everytime I re-install windows I cannot connect to it anymore.
Last time I fixed this issue it was just a single checkbox(or radio button) but I cannot remember where it was and what was it called.
I am getting error
"Error Code: 0x800704b3
The network path was either typed incorrectly, does not exists. or the network provider is not
currently available. Please try retyping the path or contact your network administrator."
Which none of them are true and by the way, I am the network administrator in my home network and sorry that I cannot contact myself (ain't sometimes Microsoft error messages as stupid as their developers?)
1- I can connect to internet and browse web and receive mail too. so my network connection is working perfectly.
2- I can ping my device (using both its IP and name). I can see an IP assigned to my device.
3- I can browse my device and even access its management service using firefox (I don't have internet explorer because I removed it)
4- I have File and printer sharing for microsoft network (in ethernet properties) installed and activated too.
5- windows installation is new so nothing is changed in it.
6- my firewall is not blocking the access to device either (If I disable it still cannot see the network drive)
7- Network and sharing center is empty!
8- In IPv4 advanced properties Netbios over TCP/IP is enabled too (which I think that was what fixed it last time)
9- there is no error event is listed in event viewer.
What is this problem that I have to fix every single time I install windows 8.1 I have to fix?

Hi Bob,
It seems like your network is working properly. So If you make sure your network path is correct, let us check other settings for mapping network drives.
Check if the issue persists under safe mode and make sure that “TCP/IP NetBIOS Helper” in service.mcs is running.
Make sure your computer name is unique and using NetBIOS over TCP/IP.
The computer name could be either a Netbios name or a DNS name. so if one doesn’t work check the other one.
You also could try the net use command, to see if it might return additional infomation
About netuse command:
http://technet.microsoft.com/zh-cn/library/bb490717.aspx
Regards

My iphone does not connect with network extender

my ihpne 6 does not get connected via my network extender.

Make sure any Advanced Calling features are turned off. The network extenders will not work with phones with AC enabled.

FaceTime does not connect to network

Why do I get a message "could not sign in. Please check your network connection and try again." when other apps over network do work?

http://support.apple.com/kb/TS3367

My Airport does not connect to network from Windows laptop, but guest network does connect to internet

I set up my new Airport Extreme and can connect to the network with any IOS device (iPod Touch, iPhone or iPad). When attempting to connect to network with my work laptop (Windows 7), I get an error that it cannot connect. I have no problem connecting to the Guest Network on this laptop. Unfortunately, no network connection.
I have Cox Communication Internet through there Motorola SURFBoard Cable Modem Model No. SB5101U.

Hey there shriya bhardwaj!
I have an article for you that will help you troubleshoot this Wi-Fi issue on your computer:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Macbook Pro does not start up and nothing works. Need recovery!

Hi there
My MacBook Pro has shut down while wathcing a video and when ever I try to start up, a sign looking loke"no parking (Prohibitory Sign)" comes up after grey screen.
I tried to start it in safe mode but it does not go in safe mode.
Tried pram and nvram reset pro but didnt help.
Succesfully started in recovery mode ( tried both cmd + R and Cmd +opt+ R) tried disc repair but it cannot repair or verify anything. it gives me errors.
Could not recover anything in here as could not find any back up.
Tried to re-install Maveric but could not see HDD, so could not go ahead.
Inserted OS X installationCD that came with laptop, stared up by holding C, tried to repair disk but again, could not repair disk.
Could not do anything in Terminal.
I cannot even erase and re-install the OS
I also had windows 7 installed but now I cant start it up aswell.
The question is, what else I can try to save my computer? More importantly, I have so many pictures I want to save. How can I save them?
Thanks in advance!
Memis.

Based on the procedures you have tried and the symptoms you have described, your MBP internal HDD had failed and will need to be replaced.
If you have a backup, your data should be available to you when you install the new HDD. If you do not have a backup, you may try to see if any of the data recovery software available online will work for you. Most have a trrial version that will tell you if they can be of any use for you or not. The last option is to engage the services of a data recover firm. They will not guarantee if they can get any or all of your data and will be very expensive.
Ciao.

Nokia 5230 does not connect with USB

When I plug the cable in my phone and notebook, the phone asks me to select the connection type. I select PC Suite. I have downloaded the latest version, but PC Suite does not connect with my phone.
I use Windows XP Home Edition SP2
I don't have a clue about the cable type, but it fits.
There is no SD card in it
Does anyone have a solution to this problem?

In that case, uninstall all Nokia related software and drivers with Revo, clean the registry with Ccleaner. Reinstall the latest PC Suite, turn off antivirus during install. Reboot the PC. Start PC Suite and then connect the phone in PC Suite mode.
http://www.revouninstaller.com/revo_uninstaller_free_download.html
http://www.filehippo.com/download_ccleaner/
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

I download the recent ios for iphone 4 and connected to my pc and it wont connect to itunes. What is the lastest version of itunes that DOES NOT support ios 7?

i download the recent ios for iphone 4. i connected iphone 4 to my pc and it wont connect to itunes. What is the lastest version of itunes that DOES NOT support the lastest version of ios?

Yes, due to Incomplete Software Update on your iPhone your Device is now in Recovery Mode and you cannot take a Backup now. But if you have taken a backup earlier then you can Restore that backup on your iPhone after you Reset your iPhone to Factory Settings.

Since upgrading to iOS 6 my iPhone now does not connect to my 2013 elantras Bluetooth set up where as with the previous version of iOS it connected seamlessly. Please let me know if you have any solutions. Thanks

Since upgrading to iOS 6 my iPhone now does not connect to my 2013 elantras Bluetooth set up where as with the previous version of iOS it connected seamlessly. Please let me know if you have any solutions. Thanks

Have you checked to see if Elentra has a firmware update since the new iOS release?

HT3669 HP ENVY 4500 e-All-in-One Version 3.2.1 does not work on iMac 20-inch, Mid 2007. Only recognizes scanner not USB printer.

HP ENVY 4500 e-All-in-One Version 3.2.1 does not work on iMac 20-inch, Mid 2007. Only recognizes scanner not USB printer.
I would like to print via the USB connection instead of wireless (the wireless does work, and the scanner works via USB).
I tried connecting the printer directly (via USB) to my MacBook Pro laptop and it worked just fine.
How can I make this printer work on my iMac?
I spent 4 hours on the phone with HP and we did every combination of installation of drivers ad nausum and their bottom line is that it is a Mac problem.
Any help would be appreciated. Will be sending this printer back to Amazon if I can't make it work on the USB.
I am open to questions or suggestions
Thanks,
Chet

After 4 hours on the phone with HP and another hour with Apple (Mavericks support) no real solution other than check everything (removed everything from Login Items, removed all HP software anywhere in the system reboot, reinstall printer) then when nothing worked for the 4500, did an OS Reinstall (boot with CMD+R).
The Mavericks support group did open an incident (# 542875311) and I will update it when I figure out how to find it on the system.
My feel is that the base problem is that somewhere between the HP-Inkjet-SW-OSX-Mavericks_v12.34.49-2 package and the Apple HP Printer software in the Library (version 2.16.1) the app for printing via the USP Port just does not get installed for the mid 2007 20 inch iMac. The scanner is recognized on the USB Port and the Printer works fine on Wi-Fi. I have too many devices to burden my home network with anothe device. Also, every time I put any HP Printer on Wi-Fi, my router (Netgear N600 WNDR3400 running 12 to 20 devices depending on who is home) gets wonky (but that's anothe story...).
Additionally, when I attach the HP Envy 4500 to my MacBook Pro (2010) it works perfect - print and scan via the USB prot and both functions show in the System Preferences - Printers and Scanners just as expected and just as the 3050 does.
Chet

HT4972 The Wi-fi on my iPhone 4 does not connect to my home network or other networks

The Wi-fi on my iPhone 4 does not connect to my home network or other networks that I have used in the past. I noticed this after I updated to version 6. I have tried to reset network settings ;turn off and on wi-fi; reset home network and it's still not working. Is there a fix for this problem?

Try resetting your network settings. Go to General\Reset\Reset Netork Settings. Sometimes this will fix things. If not, what type of router do you have, what network are you running (B, G, N, etc.).,
Good luck!

After recent upgrade Mozilla will open but does not connect - I have Norton Antivirus.

After recent upgrade Mozilla will open but does not connect. I have uninstall/reinstalled several times. I have NortonAntivirus.

It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to install for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
*https://support.mozilla.org/kb/troubleshoot-firefox-issues-caused-malware

Bluetooth ANYCOM FIPO Pairs with iMac but does not connect

Bluetooth ANYCOM FIPO Pairs with iMac but does not connect. Have paired and connected iMac to Bluetooth Keyboard, Mouse and a Plantronics Headset without issue. I have a Dell Latitude D620 that paired and connected with the ANYCOM FIPO so I know the device works. It is currently plugged into the iDock port in a Bose SoundDock..
Bluetooth Device Details.
Devices (Paired, Favorites, etc):
FIPO:
Name: FIPO
Address: 00-07-88-a0-12-ce
Type: Headset
Services:
Paired: Yes
Favorite: Yes
Connected: No
Apple Bluetooth Software Version: 1.9.0f8
Hardware Settings:
Computer:
Address: 00-14-
Manufacturer: Cambridge Silicon Radio
Firmware Version: 3.1965 (3.1965)
Bluetooth Power: On
Discoverable: Yes
HCI Version: 3 ($3)
HCI Revision: 1965 ($7ad)
LMP Version: 3 ($3)
LMP Subversion: 1965 ($7ad)
Device Type (Major): Computer
Device Type (Complete): Desktop Computer
Composite Class Of Device: 1057028 ($102104)
Device Class (Major): 1 ($1)
Device Class (Minor): 1 ($1)
Service Class: 129 ($81)
Requires Authentication: No

You may have to enter device code like 000 in phone so it can pair up.
Try checking the box you mentioned
Check the manual for your Bluetooth device it will tell you the code Read all of it!!!!!
Try turning on Bluetooth just as phone is put in search mood.

When i try and connect my phone to my laptop it does not connect

when i try to connect my phone to my laptop it does not connect to itunes. so it will not let my backup sync etc

many thanks.
Are you currently running iTunes version 11.1.4.62? If so, I'd try updating to version 11.1.5.5:
http://www.apple.com/itunes/download/
If you're already at version 11.1.5.5 (or the update didn't help with the recognition trouble), try the procedure in Cerbu's post:
Re: sync problem
... or try section 5 from the following document:
TS1538: iOS: Device not recognized in iTunes for Windows.

FaceTime 1.0.2 does not connect.

After upgrade to 1.0.2 last week, my FaceTime just does not connect.
When I call my friends, the FaceTime do appear on their side, but it does not connect after my friends click connect button. After a while, my FaceTime shows that my friend is busy, and ask me to try again.
When my friends call me, my FaceTime did not even appear.
Please help!
Thanks
Bailing

I too downloaded the new version of Facetime this evening. I had previously been using v.0.9 and it worked fine. Now that I've downloaded 1.0.2, it does not work at all. Half the time it tells me the camera is off and then tells me there was an internal error and i was disconnected from facetime. The other half of the time, when I try to turn on face time it just sits and whirls but never connects. I've tried many of the other suggestions on this topic including repairing disk permissions, changing my DNS settings, re-booting etc. None of it has worked so far. I am on a iMac (late 2009) version. Any suggestions would be much appreciated

Version 35.0.1 does not connect to network & nothing works

Similar Messages

Maybe you are looking for