Version 7.0.1 gets HUGE, the display gets skewed and then the system (XP Pro) locks up!
Computer is a Lenovo T500, running XP Pro. Since version 7.0.0 Firefox grows HUGE to the point where the display gets skewed and the system is locked and then unlocked.
I have to kill Firefox in order to clear up the problem -- then it starts all over again. I have seen it grow to well over 1,400,000 KB of memory usage-- and more!
It was working fine on the Firefox 5 versions.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Similar Messages
-
I am trying to change country to US for iTunes on my iPad. After I select US in account setting and press NEXT I get message: "Cannot connect to iTunes" and then "The iTunes Store could not process your request. Please true again later". Help please.
downloaded the updated iTunes and that did nothing. I then went through the form about $ very VERY carefully and discovered one field left blank. Once that was filled in, everything worked and I now have my free app.
-
Can't back-up new iMac with fusion HD. The back-up proceeds to within 10% of the total storage needed and then the "of" number increases. I suspect there is a problem with backing up the fusion drive. We have a new 3 TB time Capsule. I tried excluding different parts of the software from the back-up but it didn't make any difference. I even tried exluding "invisible items" to no avail. Any ideas?
When you setup the wireless and ethernet in the computer.. ipv6 will be on automatic.. this is wrong for the latest TC firmware and airport utility. http://support.apple.com/kb/TS4597
Go to the wireless and ethernet setup in preferences and change ipv6 to link local.
Once you do the big backup by ethernet the wireless will function fine for incremental.. it is obviously not estimating the size correctly..
A full back-up on the iMac would be about 650 GB. The partial updates that I have been trying start out at 115MB and keep growing indefinitely. The original back-up never finished nor have any of the follow-up attempts.
The first estimate should be the full backup but it will keep growing as the backup advances.. I would also delete any inprogress files to make sure it is not messing up .. delete even a sparsebundle if there is one for the imac on the TC and start afresh once you have ethernet connection.
See A10 here.
Pondini may have some other clues there to give you an idea of why the backup is slow or not finishing.. there is a lot of issues with TM when it decides not to work. -
When I pull the notification screen down after about 5 seconds the screen goes black and then the apple appears for about 30 seconds and then returns to the home screen, this is an iPhone 4 running ios7 , any ideas??
One problem though, the top button on my phone is jammed so i cant power off the phone, anyway of resetting the phone without using the top button ?
-
My iMac won't start up properly, it powers on the bong sound happens and then the little gear spins forever
ive tried booting from my leapord disk
smc reset
pram reset
and safe bootPlease carefully read Apple's advice letter Gray screen appears during startup for troubleshooting steps.
-
I have a MacBook Pro (purchased in 2011) with OS X Lion 10.7.4. I'm using Microsoft Office 2011 and cannot open older PowerPoint Files (non .pptx). It will always open the same .pptx file and then the machine hangs up and just keeps spinning.
Thank you - that all makes sense. It is, indeed, exactly what I did when I upgraded.
I'm also writing this on the machine that crashed a few minutes ago (I posted the crash in another thread). I got back with a 'safe boot' - as I have done a few times before.
I've also de-installed little snitch (and then done a safe-boot & then re-boot ) since that seemed involved. I de-installed Adobe flash, since that seemed to be a problem - I then re-installed the later, apparently fixed, flash. The most recent crashes don't seeme to have a problem with flash any more.
I've posted the various ( generally different ) crashes. I also posted a summary of the similar lines that turn up in most of the crashes.
Unfortuantely, I'm actually trying to use the machine to meet some urgent deadlines and all this is not making it at all easy.
I had had great hopes for 10.7.2 - I thought that the crashes must be pretty common, so would have a common aetiology. There do seem to have been some fundamental changes to the file sytem and to the video interface (that seems to cause problems to brand new iMacs as well as to my 2009 iMac). -
MB pro late 2011: The program shuts down and then the computer "dies"
Hi! I just bought a Mackbook pro from late 2011 but my programs (as imovie, iphoto, spotify ect) shuts down like all the time and then the computer "dies" and sometimes I have to reformat the computer... Anyone that know why my computes is acting like this? Would be so grateful if someone could help we with this!
Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
OS X 10.7 or later was installed by the previous owner
The startup volume was encrypted with FileVault
You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like. -
My macbook shows up the apple at startup and then the screen turn blue
As I said, when I turn on my macbook, the apple appears and then the screen turns blue and stays like that.
I have a Macbook (purchased in september 2008) in India. I got a blue screen error in 2010 when it was under the Apple care protection plan. I took it to the service centre and they replaces the Logic board to sort this error. After that the blue screen error appeared in 2011, 2012 and 2013. For the past 2 years, I have taken in the macbook atleast 5 times for the same error and the service centre had been re-formatting it and giving it back to me. But the problem kept re-curring. No proper diagnosis is being given at this apple authorised service centre.
I finally called up Apple tech support, who made me give the machine back to the same centre. Techsupport asked them to perform some check measures and finally decided that the OS being installed in my machine was the wrong one.
So the Service centre installed the original one from the CDs I had.
But this is no resolution as no one is willing to comment on this service measure nor is there any assurance that this will not happen again.
I have spent more than 15,000 rupees on the repairs for the past 2 years and am fed up of this.
I came to know from an Apple source that in the US, Apple has no "repair" policy and in the event of such a case, replaces the machine.
Can anyone here guide me on this please?
I will be grateful for any and every input.
The Apple authorised service centre is TRESOR SYSTEMS in Gurgaon, Haryana, India.
thanks a tonne
Shalini -
I can't download Firefox. Every time I try a popup says the file is corrupt and the download goes away. What do I need to do to make the download work?
Download a fresh Firefox copy and save the file to the <u>Desktop</u>.
* Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/Profile_backup -
I have an iPod Classic 4th Generation and my click wheel connection is broken and so does not work. I can still play music on my Bose dock station but I cannot choose which album I want to play because I cannot scroll down the playlists. I can just play the first tune in the list or from where I last paused a tune. Is there a way to scroill down the list, including the top menu list, without using the click wheel?
Index Values, I think, is the property you are looking for. Set the index to 0 to be at the top.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
Does anyone know how to delete an iTunes account?
Welcome to the Apple Support Communities
You must create a new user for your other Apple ID so you can use them on your PC -
I have an iPod Classic and the latest version of iTunes. I make all my purchases on my computer, but when I try to click the "add to" option and transfer the songs to my iPod, it doesn't work. How can I get my songs from my computer to my iPod?
See this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
Recovering your iTunes library from your iPod or iOS device
B-rock -
I have the mini display port cable to hdmi. When I connect I can get audio but on the video I get the display auro screen and can't get my actual display to show as that is not what shows on my display. How can I fix this?
System Preferences>Displays
There is a little white bar. When you have your TV connected, move the white bar to the other display. Your main desktop is now the TV screen -
MBP in lid closed mode, will the display get to hot?
i run my MBP in lid closed mode all of the time, as i have a Cinema Display hooked up. i'm not too worried about the MBP overheating, but i was wondering about the display getting extra hot from the MBP when it's closed. i do have a radtech microfibre cloth on top of the keys as protection...
should i be concerned?
17" MacBook Pro Mac OS X (10.4.8)I'm interested in this issue too, as I intend to get an MBP but use it with an external screen and keyboard most of the time.
I'd also like to know about ventilation - where does the cooling air come from and go to? What parts need to be kept clear, and which bits can I have up against or close to a bookshelf or hutch or whatever?
Thanks in advance.
PS, I think the glossy screens look fantastic, but also think I'll go for matte since they are more practical.
G3 B&W Mac OS X (10.4.8) -
My thuderbolt display is 3 weeks old which I'm using as display for my mac mini. I no longer get the display on but can hear the sound. Please suggest.
Make sure the mini-displayport/TB plug is fully seated. It may look fully plugged in but isn't.
Make sure the Displays system preferences has an Arrangement tab. No Arrangement means the monitor is not being detected.
Do a smc reset.
If none of this works I suggest you take it back to apple (along with your mini).
Maybe you are looking for
-
Stored DB Procedure - Need help
Hi. I have a stored database package containing 2 functions. I need help with the function named ret_columns. If you look at the code below you will see this function has two different FOR loops. The Select statement in FOR loop that is commented out
-
How can you save the cuepoints so you can easily modify them in the future?
I encoded my videos with cue points using the Flash encoder, so that is relatively smooth. However, I want to be able to save all the cue point / parameter information so that I can use that as the starting point if I need to change / add cue points.
-
PLS-00201 error occurs when batching a stored procedure in SQL*Plus
I have a batch file to run a stored procedure and spool the results to file. When I enter the commands manually in sql*plus the output works fine and my results are spooled to the output file. But when I run the same commands in the batched script I
-
How to setup everything to start making mobiles games?
I want to learn how to write applications/games for a HTC hero (and other mobile phones) in java me. I installed: - netbeans - mobility Version: 1.6.1 (I guess that is the same is java ME?) When I press: file/New Project Select "java me" Select "CDC
-
Photoshop CS5 32-bit vs 64-bit
I have a quick question about using the 64-bit version of PS. Right now, I primarily use Photoshop for my college classes. I was wondering if I used the 64-bit version of Photoshop and my professor doesn't have the 64-bit, will she still be able to o