Version 8 configure error when opening Itunes after updating to V8

I have contacted iTunes several times with no answer to this problem.
Everything was fine until I updated to Version 8, now every time I try and open iTunes it starts with a green bar stops about 3/4 along bar then says you need to restart to configure with Windows.
I restart then it does the same as before yes, DEJA VU.
This VERSION 8 is BUGGED I tell ya!
Any solutions would be appreciated before I delete this software and use something else!
Message was edited by: Version 8 bug
Message was edited by: Version 8 bug

I have a similar problem. After updating to version 8 (October 25, 2008) the itunes icon is plain and clicking it gives an error message (translated) like "This measure is only allowed for installed products".
So I fetch the iTunes801setup.exe and try to install it again by clicking the "Repair" button. It appears to do its' thing and asks me to restart the machine. OK, but after that it's the same again: "This measure is only allowed for installed products".
I don't want to lose all my music, can it be saved?
I guess that I will lose it if I remove iTunes and start all over.

Similar Messages

  • Error message when opening iTunes after updating Windows 8.1

    I recently updated my windows software to 8.1.  Now I am getting a message that iTunes stopped responding and must close.  I tried to uninstall and reinstall iTunes but that has not fixed the problem.  I cannot get iTunes to open.  There is no error number when this dialogue box opens. 
    Any help would be greatly appreciated!

    Hello Socestlavie,
    It sounds like iTunes is not opening correctly and is quitting on launch. I would troubleshoot the iTunes launch issues with the following article to help resolve the issue:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    First attempt starting iTunes in Safe Mode to see if the issue persists, and proceed accordingly.
    Start iTunes in Safe Mode
    Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
    Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
    Click Continue.
    See if the issue you're experiencing persists in Safe Mode.
    If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
    If it comes down to reinstalling iTunes, there is an article provided that will uninstall iTunes AND its associated softwares for a complete wipe, and reinstall, so I would try that one more time, if needed.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • Audio Configuration Error when Opening itunes

    I installed the latest version of iTunes onto my PC a few days ago, and just tried to open it tonight. Everytime I try and open iTunes (via shortcuts or the direct icon in the Programs folder), a message pops up, telling me that "iTunes cannot run because it has detected a problem with your audio configuration." I checked through the FAQs and troubleshooting and came up empty-handed. Anyone know how to fix this problem? Thanks in advance!

    Read this and follow the steps:
    http://docs.info.apple.com/article.html?artnum=304424
    Rachyl

  • Getting two errors when opening attachments after updating to latest version of Thunderbird. First one is exception "cannot call openModalWindw on a hidden win

    After the last Thunderbird update 24.4.0, attachments no longer open. Attempt to open attachment flashes a message quickly but not long enough to read. I get the following errors in the error log with every attempt to open a document like word.
    [Exception... "Cannot call openModalWindow on a hidden window" nresult: ox80040111 (NS_ERROR_NOT_AVAILABLE)" location: "JS frame :: resource://gre/components/nsPrompter.js::openModalWindow::line 382" data: no]
    resource://gre/components/nsPrompter.js
    The second error is
    TypeError: this._taskbar is null
    resource://gre/modules/DownloadTaskbarProgress.jsm
    Under tools I have Word docs set to open with Microsoft Word. What are these errors and why can't I no longer open Word documents?
    In addition I also receive multiple warnings at the same time such as Unknown property 'mso-style-type'. Declaration dropped.
    {mso-style-type:export-only;
    Expected '{' to begin declaration block but found 'WordSection1'.
    @page WordSection1
    DCar

    What happens when you save the attachment to disk and open it with Word?

  • Calendar error when opening iCal after Update

    Everytime I try and open my calendar after the software update I get a drop down message "updating calendar" then the whole thing crashes. I tried going in to system preferences to icloud settings but when I go to check the box next to calendar that freezes up and I have to Force Quit that. Please any help would be appreciated. This is the first time I have hated a software update. I am using 2013 MacBook Air.

    Me too - after Yosemite.  It happens while iCal is updating.  I also have CalendarAgent hogging 90% plus of my CPU even when iCal is off.  Please help someone...

  • An unknown error occurred (-42110) when opening itunes after upgrading

    when opening itunes i get "an unknown error occurred (-42110) when opening itunes after upgrading to latest version.

    Try the following user tip:
    iTunes for Windows 11.0.2.25 and 11.0.2.26: "Unknown error -42110" messages when launching iTunes

  • Error when opening itunes : iTunes has stopped working ''A problem caused the program to stop working correctly''. When I repaired damaged files the problem still exists and also after uninstalling and redownloading and installing itunes. I have windows 8

    Error when opening iTunes : iTunes has stopped working '' A problem caused the program to stop working correctly''.
    When I repaired damaged files the problem still exists and also after uninstalling, redownloading and reinstalling iTunes.
    My pc is working with windos 8.
    Is there a solution?

    Hey there Rodney274,
    It sounds like you are getting an error from iTunes when you launch it. I would try the troubleshooting in this article named:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Start with troubleshooting for 3rd party plug ins section, then the rest of the article if needed:
    Start iTunes in Safe Mode
    Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
    Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
    Click Continue.
    See if the issue you're experiencing persists in Safe Mode.
    If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • I now get an 500 Internal Server error when loading Firefox, after updating RealPlayer

    I now get an 500 Internal Server error when loading Firefox, after updating RealPlayer.
    When I try to open Firefox, it opens. But there is the error message.
    What is this? How do I did rid of it?
    '''bold text'''

    Clear the cache and the cookies from sites that cause problems.
    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    You can also check the connection settings in Tools > Options > Advanced : Network : Connection<br />
    If you do not need to use a proxy to connect to internet then select "No Proxy"
    See "Firefox connection settings":
    * [[Firefox cannot load websites but other programs can]]

  • APPCRASH error when opening iTunes store on Windows 7

    I keep getting an error while opening iTunes.  I open iTunes and everything works fine. Once I click on Store I either get a APPCRASH error or a BEX64 error. See below:
    Problem signature:
      Problem Event Name: APPCRASH
      Application Name: iTunes.exe
      Application Version: 12.1.1.4
      Application Timestamp: 54de1991
      Fault Module Name: JavaScriptCore.dll
      Fault Module Version: 7600.1017.9000.1
      Fault Module Timestamp: 54dd6800
      Exception Code: c0000005
      Exception Offset: 00000000001d2281
      OS Version: 6.1.7601.2.1.0.256.4
      Locale ID: 1033
      Additional Information 1: c68f
      Additional Information 2: c68f103db5c736478cb372195ad1215a
      Additional Information 3: 0611
      Additional Information 4: 061157244cc9fcdfca979efec0e9f33d
    and:
    Problem signature:
      Problem Event Name: BEX64
      Application Name: iTunes.exe
      Application Version: 12.1.1.4
      Application Timestamp: 54de1991
      Fault Module Name: StackHash_2264
      Fault Module Version: 0.0.0.0
      Fault Module Timestamp: 00000000
      Exception Offset: 0000000014583753
      Exception Code: c0000005
      Exception Data: 0000000000000008
      OS Version: 6.1.7601.2.1.0.256.4
      Locale ID: 1033
      Additional Information 1: 2264
      Additional Information 2: 2264db07e74365624c50317d7b856ae9
      Additional Information 3: 875f
      Additional Information 4: 875fa2ef9d2bdca96466e8af55d1ae6e

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • Unable to open itunes after update

    unable to open itunes after update

    I had a user with the same issue after updates and I was able to resolve. 
    I copied QTMovieWin.dll from:  C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    to: C:\Program Files (x86)\iTunes
    I did so after uninstalling and re-installin, but I don't beleive that was necesssary.  Thanks to user thurdy.  This fix was from apple support for the error "iTunes stopped working".  Figured I'd give a shot and it ended up working.
    For reference the user was receiving the following errors exactly:
    "the procedure entry point [email protected]***@@[email protected] could not be located in the dynamic link library JavaScriptCore.dll"
    and
    "iTunes was not installed correctly.  Please reinstall iTunes.  Error 7 (Windows error127)"

  • ITunes 11.1.2 error when opening iTunes Store on windows 8.1 64b

    After updating iTunes to version 11.1.2 is giving error when accessing the iTunes Store and the program and ended.

    Same issue.   Win 8.1 64-bit.   iTunes 11.1.2.31     Everything else seems to work fine, but when attempting to open the iTunes Store, error message "iTunes has stopped working".    It happens whether or not I'm signed in to my AppleID account.    My computer is 'authorized'.
    This just fixed my issue:
      Level 1 (5 points)
    Mark Justison
    Currently Being Moderated  Re: Itunes crashes under windows 8.1
    Oct 18, 2013 9:53 PM (in response to Mark Justison)
    Found the problem. I considered the fact (not having actually tried Itunes in windows8) that it could be a windows 8 problem exclusively.
    I found this...
    thurdy
    Re: iTunes has stopped working. Why? 
    Sep 11, 2013 6:07 AM (in response to thurdy)
    Resolved!
    After contacting Apple, I received a reply from their engineers:
    Copy QTMovieWin.dll from:  C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    to: C:\Program Files (x86)\iTunes
    And that did the trick.
    Message was edited by: Stryder777

  • Configuration error when open admin tool in BIEE 11g client

    Hi All,
    I have installed BIEE 11g client in my laptop,the version is 11.1.6.2 ,it has show one error in the installation log :
    <action name="Custom Action" target="oracle.bi.CustomIAActionGetInstanceNumber" status="error">
    - <AdditionalNotes>
    <error>class oracle.bi.CustomIAActionGetInstanceNumber.install() runtime exception:</error>
    </AdditionalNotes>
    After installation,when I try to open the admin tool in start menu,it show configuration error , but I can open the admin tool through installation directory.
    And when I try to import metadata,it also shows connection has failed.
    Can any body give some helps on this,thanks a lot.
    Ryan.
    Edited by: 997662 on Apr 5, 2013 1:39 AM

    Hi,
    Let me know which version you are using (OBIEE) ?
    you are trying to install Client (Admin Tool) and OBIEE server in same machine ?
    Thx,

  • Cannot open iTunes after updated to 10.5

    I updated from 10.3 to 10.5 yesterday and I can't open itunes at all.
    when I click iTunes, the message pops up, says
    'This iTunes has not been correctly configured'
    what does that mean? and what should I do??
    please reply with a solution!!
    Thanks

    oh by the way, I am using iMac OS X version 10.7. if this info helps..

  • Re: Can't open itunes after update.

    I just updated my macbook pro to 10.8.2 with the newest update. Im pretty sure the only real update was the new itunes and a few other small things. After my Macbook pro installed the updates and restarted, I can no longer open itunes and when I try to an error message appears saying "This copy of iTunes is corrupted or is not installed correctly. Please reinstall iTunes." So i tried to go to apple.com and redownload itunes but it won't download. Has this happened to anyone else? Anybody have any tips?
    Thanks

    What happens when you try to download it?

  • Error When Opening iTunes

      Windows XP SP2 
    This suddenly started happening and I don't know why. When I open iTunes it says "iTunes has encountered a problem and needs to close." then it closes. No iTunes window pops up or anything, just this error window. It has no relevant information that might help anyone here fix. I've tried re-installing iTunes, scanning for viruses and spyware but found nothing. I even tried removing everything from registry after uninstalling iTunes but that did not help. I'm thinking maybe a iTunes substitute but I don't know if they work, I heard there are some out there but never used before.
    P.S. I have an iPod problem too, check it out.

    Hi there - I have had this exact problem after restoring my computer. I have just had the problem again and found this article. By following all the advice, I was able to get itunes back running again.
    http://docs.info.apple.com/article.html?artnum=93976
    The other thing to do is delete the Quicktime icon from your desktop toolbar. Also in the section which talks about Emptying your Temp Directory, my system would not let me do this as some files were "bring used", so I went into the temp folder and manually deleted any which related to itunes or Quicktime.
    Hope this helps.

Maybe you are looking for

  • Setting focus on a component from backing bean

    Is there an easy way to set focus in a specific component on the jspx from a method in the backing bean? (other than javaScript coding...)

  • Can't convert .DV to any format in Quicktime

    Hi! I've recently created a movie project in iMovie and exported it to Quicktime, for it to keep it's full resolution. The problem is... the file measures about 1.09 Gb, for a 5:49 movie. I want to convert it to .avi to reduce it's size, maintain qua

  • Email Body

    Hi, We are sending Sales or. document as PDF attachement through mail. The requirement is attached PDF document should show in email body. Is it possible? Please provide help full information.

  • Higher Education Cess not appearing in Excise Utilization tab

    Hello Gurus, When i create excise invoice, system is calculating the SeCess in the " CREATE EXCISE INVOICE SCREEN". But, the same is not appearing in the excise Utilization tab.  Plz guide to help me solve this issue. Thanks in advance! Warm Regards

  • How to set Reminder to vibrate?

    Hi everybody, this is my first message in this forum I installed the Reminder application on my Nokia C7. I noticed that it beeps even when I set the phone in "meeting", "vibration" or "silent mode". Ringtones and Reminder settings seem to be indepen


HashFlare