Version A of ODS object 0FIAP_O03 does not exist
I am installing this ODS and when i hit simulate , I am getting this message and only the cube is getting installed and nothing else.
Version A of ODS object 0FIAP_O03 does not exist
Thanks
Hi,
The ODS and update rules might be greyed as they might have already been installed. Even if an object is greyed for the Install check box, it will give you the option to Match or Copy, which would overwrite the current object version with the Business Content version, so try installing selecting this check box.
Moverover when you are trying to view the activated objects some times the displayed objects are not refreshed, so try refreshing the same and then viewing.
Hope it helps.
Cheers
Anurag
Similar Messages
-
Hi,
We are experiencing the following error when trying to retrieve data from the OLAP layer in our front-end:
ORA-34492: Analytic workspace object __XML_GET_FULLTOAW_NAME does not exist.
to be more specific, the following happens:
We are using the Oracle OLAP Java api's to query the analytical workspace. We create a Source object that contains the joins we want. This source is prepared and committed via the TransactionProvider class. Via the DataProvider we then create an SQLCursorManager and generate the SQL and execute it via JDBC.
We were able to execute it without problems on an XP development platform. When switching to another platform that we use, it gives the following error messages:
(platform with the error is Linux x86-64; more version info further down)
Caused by: java.sql.SQLException: ORA-34492: Analytic workspace object __XML_GET_FULLTOAW_NAME does not exist.
ORA-06512: at "SYS.OLAPIMPL_T", line 23
ORA-06512: at "SYS.OLAPIMPL_T", line 17
ORA-06512: at line 4
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:305)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:272)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:626)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:113)
at oracle.jdbc.driver.T4CStatement.execute_for_describe(T4CStatement.java:352)
at oracle.jdbc.driver.OracleStatement.execute_maybe_describe(OracleStatement.java:894)
at oracle.jdbc.driver.T4CStatement.execute_maybe_describe(T4CStatement.java:384)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:984)
at oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:1124)
Platform/version info that produces the error:
Linux x86-64
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for Linux: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
OLAP A patch for 10.2.0.3 is applied.
Platform where this works without problems:
Windows XP
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
Any info on resolving this issue is greatly appreciated!
Thanks,
EdHi Keith,
Yesterday I actually fully rebuilt/redeployed the AW. (I only patched our 10.2.0.3 installation with the OLAP A patch very recently.) Even the AW's tablespace was recreated, just to make sure everything was gone. Redeployment of the OLAP objects from OWB control center went without any problems.
Let me answer your questions one by one below.
1) How did you build the AW?
We use OWB. The only thing I used AWM for is to actually create the AW. Once created, I use OWB to design and deploy. The front-end developers use AWM sometimes for viewing data in the OLAP objects. (I use OWB or AWM for that.)
2) Can you connect to the AW via AWM, if so can you use the Data Viewer option to view:
a) each dimension and check you can drill up and down.
b) each cube
I have been playing around a bit with the dim's and cubes in the AWM by right-clicking and selecting view data ... (that's the data viewer option?) and encountered no problems.
3) You are using the OLAP API directly, what sort of application are you building - Java Client, JSP, Applet and are you using BI Beans?
We are building a JSP type application, but so far only servlet code is being executed as the failure occurs on issuing the query. We are not using BI BEans.
Thanks for your feedback!
grts,
Ed -
Object SYS_PLSQL_534463_100_2 does not exist
I tried to compile a package spec ( header ) and got the error object SYS_PLSQL_534463_100_2 does not exist. The object SYS_PLSQL_534463_100_2 exists as a type and I granted all to public on that object. Any ideas?
Thanks dude. At least I got some idea where it could be messing up. I am using the pipelined functions with my own user-defined types. I went through the article and found something like following
Here is a simple way to bypass the bug before 9207 patchset is applied. Convert those PLSQL TYPEs which are used by table function in the package to Oracle Stored TYPEs. This way, you take control on packages, types and their relationships. Oracle won't version the stored TYPEs automatically as it does for the packaged TYPEs.
Do you know what exactly it means?
Hari -
Object dba_registry does not exist
Hi,
We are performing Preparation Phase for Oracle 9i upgrade.
In check for invalid database objects section, when I ran
SQL> select comp_id, version, status from dba_registry;
got message "object dba_registry does not exist"
I am not sure this is issue or not. Please explain me and tell me solution.
Also when I execute
SQL> select count(*) from dba_objects where status='INVALID';
10
SQL> select owner, object_name, object_type from dba_objects where
status='INVALID'
Displayed 10 objects with details.
Does above result will make any issue for upgrade? Please explain me.
Regards
Srinivas.Yes Eric, you are correct dba_registry not in 8i. I could not able to find this in Oracle 9i upgrade document. I found this info in Oracle site.
and my last SQL query output
OWNER:SAP<SID>
OBJECT_NAME:BBPV_CTR_LOCAL
VIEW
All other 9 objects names start with BBPV_*
Regards
Srinivas -
E-Recruiting - Synchronization object u2018BPu2019 does not exist in customizing
e-Recruiting Question: Version 6 u2013 patch 10
The following error is presented when new eRec users are created or new external users are created.
Synchronization object u2018BPu2019 does not exist in customizing
I have concern that customizing table CRMC_BUT_CALL_FU is not properly maintained as it initially dumped on creation, but after an update to the table the dump is resolved but I still receive the error.
Any hints or example of the configuration in this table for a working e-Recruiting system?
Regards-
bUpdate:
After a lot of digging, we discovered that the JDO mapping is creating a lower bound with a one that should be a zero on the relationship... A forum suggested that adding cascade-delete will force the zero with no foreign key constraints... -
Object EXTERNAL_TABLE does not exist???
I've written the following function that references an external table within the same schema. When I try to execute the function, it returns an error that "object EXTERNAL_TABLE does not exist"
I've also tried creating a view that points to the external table and then pointing this function at the view but I still get the same error.
Any ideas on how to make this work? Thanks in advance!
CREATE OR REPLACE
FUNCTION ugaps.get_can
p_string_value IN VARCHAR2
RETURN VARCHAR2
IS
can_value VARCHAR2(9);
BEGIN
SELECT CC_ENT_CAN
INTO can_value
FROM CAN_SSN_CONVERTED
WHERE CC_ENT_PRIMARY_ID=p_string_value;
RETURN can_value;
EXCEPTION
WHEN NO_DATA_FOUND THEN
RETURN '810XXXXXX';
WHEN OTHERS THEN
RETURN 'ERROR-->' || SQLERRM;
END;
/I removed the "WHEN OTHERS" clause per your suggestion. Now I'm getting this:
ORA-06564: object EXTERNAL_TABLE does not exist
ORA-06512: at "UGAPS.GET_CAN", line 9
06564. 00000 - "object %s does not exist"
*Cause: The named object could not be found. Either it does not exist
or you do not have permission to access it.
*Action: Create the object or get permission to access it.
The database is Oracle 11.1.0.7 for Windows 2008
The external table, function, and execution of that function are all within the same schema, which has DBA privileges, so I should have permissions. If I run the "SELECT" statement alone, it works properly.
Edited by: markr3 on Feb 19, 2010 2:48 PM -
Text ID for text object MATERIAL does not exist - MM01
Hi All,
I am getting below error message when trying to save Material Master in MM01.
Text ID for text object MATERIAL does not exist
Message no. TD603
Diagnosis
You want to edit a text. However, the text ID (text type) of the specified text object does not exist.
Procedure
You can display a list of valid text IDs (text types) using F4=Possible entries. You can select the required text ID from this list with F2 or a double click.
The valid text objects are listed in table TTXOB. The valid text IDs (text types) for an object are specified in table TTXID.
I have searched the forums but couldn't get relevant message.
Please assist.
Thanks,
RajHi Jurgen,
This is the complete message i am getting.
Text ID for text object MATERIAL does not exist
Message no. TD603
Diagnosis
You want to edit a text. However, the text ID (text type) of the specified text object does not exist.
Procedure
You can display a list of valid text IDs (text types) using F4=Possible entries. You can select the required text ID from this list with F2 or a double click.
The valid text objects are listed in table TTXOB. The valid text IDs (text types) for an object are specified in table TTXID.
If I enter MM02 and without changing anything if i save still i get this error message.
Thanks & Regards,
Raj -
Text ID for text object BUT000 does not exist
Hi Experts.
I am doing data migration using LSMW with IDoc. I have this error message "Text ID for text object BUT000 does not exist" when processing the IDoc.
Can anyone tell me what is this error about and how could i fix it. A step by step guide would be nice. Really need advice urgently.
I'll definitely rewards points.
Regards,
Juliannafor this u need to maintain the text object and its related text id using the TC: SM31 in rel. view of ur tcode( like MM01, Va01 etc).
first get the view names(1 for text object and 2 for text id) from fun. people.
then go to sm31 with 1 view, create BUT000 .
then go to sm31 with 2 view, maintain text id for the text object:BUT000. -
Error: Number range for object RESB does not exist
Hi
I'm trying to convert a planned order (to purch requisition) partially via trxn code MD04. Upon saving I get the above error msg. The complete text of msg is as follows. I've maitained the number ranges of all the objects specified in this error msg. Can somebody explain on how to overcome this problem?
Many thanks
BE
Error Msg Text:
Number range for object RESB does not exist
Message no. 61501
Diagnosis
The system cannot create a document for an MRP element if no number
range or interval has been maintained in Customizing of MRP or if t
number range you have maintained is not allowed.
Below is a list of MRP elements that are affected:
Number range object MRP element
PLAF planned order (operative oder simulative)
EBAN purchase requisition
RESB dependent requirements
MDSM simulative dependent reqmts (long-term plannin
MDTB MRP list
Procedure
Check the number ranges in Customizing. If you do not have the necessa
authorization, please get in touch with your systems administration.Hi
Thanks for the reply. But I have maintained the number ranges for matl. reservations/dependant requirements at OMI2. Here is the screen shot..Do find anything wrong with it? Pl advice.
NR Object MRES/DREQ
No. From Number To Number Curr Number Ext
01 0000000001 8999999999 380 blank
02 9000000000 9500000000 blank checked
RB 9500000001 9999999999 blank checked
Number ranges for the plants are assigned to 01 (0000000001 to 8999999999).
thanks
BE
Edited by: Brian Elfie on Jan 10, 2008 11:27 AM -
Number range for object MDTB does not exist - Message no. 61501
Hi All ,
I have done the necessary configurations in PP say
Order Type
Order Type Dependent Parameters
Scheduling parameters for planned & production order
Confirmation parameters
Availabilty check etc
and iam able to create planned & production order and confirma the production order.
I want to configure for MRP: -
Settings done are
Have activeted planning file entry for all plants.
When i run MRP system throws a error <b>Number range for object MDTB does not exist - Message no.61501 </b>
Is there anything to do with plant parameters OPPQ and Mrp Group OPPR.
I just tried plant parameters,standard 0001 is not available for copying.
Suggest me how to proceed to set MRP.
ShankarHi shankar
it is a good practice while creating the plant copying the plant from the standard plant so that all the standard table enteries will be copied for the plant as the standard plant is not there youcan think of copying from any other plant similar to your plant which has the required entry. else
in SE16N check the NRIV table for the Object MDTB. if enteris found then make the table entry with the help of abaper.
hope this helps
regards
SK -
Error: Object "Dot11BandSelect" does not exist.
Has anyone else received Error:Object "Dot11BandSelect" does not exist. when configuring the 802.11 settings on a 4400 WLC runing ver. 6.0.196.0
If so what did you do to resolve it.
Thanks
Barry6.0.196.0 is a deferred code.
http://www.cisco.com/web/software/Wireless/Deferral/Software_Advisory_6_0_196_0.html
Are the global band select enabled, are you getting this error when enabling bandselect on a WLAN's advanced tab. -
ORA-04043: object Table_Name does not exist
Can any one tell me if this is a known bug or am I doing something stupid?
STEPS:
1 - I create a table under user1 ID (user1 table space)
2 - I describe the table and it exist (describe Analyte)
PKANALYTEKEY NOT NULL NUMBER(38)
ANALYTENAME VARCHAR2(64)
ANALYTEABBREVIATION VARCHAR2(20)
ANALYTESTATUSCODE VARCHAR2(20)
STANDARDOPERATINGPROCEDURE NUMBER(38)
UOFM VARCHAR2(15)
ROWSTATUS NOT NULL CHAR(1)
CREATIONDATE DATE
MODIFICATIONDATE NOT NULL DATE
RECTIMESTAMP TIMESTAMP
2 - I grant all privileges on this table to user2 (Successfully granted)
3 - I log into SQLSheet using user2
4 - Try the Describe on the table and get "ORA-04043: object <Table_Name> does not exist" Error.
Any help will be greatly appreciated.
Regards,
Kumar.You need to qualify the table name with the schema.
desc user1.analyte -
Emca fails - ORA-04043: object HA_HOST_CREDS_ARR does not exist
I'm recreating an EM repository in an 11g database which I upgraded from 10g recently. Its running on Solaris 10 and its repository wasn't working so I dropped it with plans to recreated it. As part of the prep work I did the following:
- Dropped user sysman with cascade option
- Dropped public synonyms referencing tables owned by sysman
- Altered profile default making its attributes unlimited (company I work for change it for security)
- Dropped role MGMT_USER
After setting the Oracle Home and SID I ran emca:
emca -config dbcontrol db -repos create
It produced errors detailed in emConfig.log and its associated emca_repos_create_<date>.log respectively:
emConfig.log
Jan 18, 2011 1:48:20 PM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Jan 18, 2011 1:48:27 PM oracle.sysman.emcp.EMReposConfig createRepository
CONFIG: ORA-04043: object HA_HOST_CREDS_ARR does not exist
ORA-06512: at line 14
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-04043: object HA_HOST_CREDS_ARR does not exist
ORA-06512: at line 14
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1650)
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeScript(SQLEngine.java:1000)
at oracle.sysman.assistants.util.sqlEngine.SQLPlusEngine.executeScript(SQLPlusEngine.java:339)
at oracle.sysman.assistants.util.sqlEngine.SQLPlusEngine.executeScript(SQLPlusEngine.java:380)
at oracle.sysman.emcp.EMReposConfig.createRepository(EMReposConfig.java:511)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:229)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:589)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1448)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:573)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:521)
Jan 18, 2011 1:48:27 PM oracle.sysman.emcp.EMReposConfig invoke
SEVERE: Error creating the repository
Jan 18, 2011 1:48:27 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Refer to the log file at /u01/app/oracle/cfgtoollogs/emca/t28gdr/emca_repos_create_<date>.log for more details.
Jan 18, 2011 1:48:27 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Error creating the repository
Refer to the log file at /u01/app/oracle/admin/t28gdr/scripts/emConfig.log for more details.
Jan 18, 2011 1:48:27 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error creating the repository
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:241)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:589)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1448)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:573)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:521)
Jan 18, 2011 1:48:27 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to /u01/app/oracle/product/11.2.0/db_1/oui
emca_repos_create_2011_01_18_13_48_20.log
Check if repos user already exists.
old 6: WHERE username=UPPER('&EM_REPOS_USER');
new 6: WHERE username=UPPER('SYSMAN');
old 8: IF ( '&EM_CHECK_TYPE' = 'EXISTS') THEN
new 8: IF ( 'NOT_EXISTS' = 'EXISTS') THEN
old 11: raise_application_error(-20000, '&EM_REPOS_USER does not exists..');
new 11: raise_application_error(-20000, 'SYSMAN does not exists..');
old 14: ELSIF ( '&EM_CHECK_TYPE' = 'NOT_EXISTS' ) THEN
new 14: ELSIF ( 'NOT_EXISTS' = 'NOT_EXISTS' ) THEN
old 17: raise_application_error(-20001, '&EM_REPOS_USER already exists..');
new 17: raise_application_error(-20001, 'SYSMAN already exists..');
old 21: raise_application_error(-20002, 'Invalid Check type &EM_CHECK_TYPE');
new 21: raise_application_error(-20002, 'Invalid Check type NOT_EXISTS');
Create SYSMAN user.
No errors.
Script to revoke DBA role from SYSMAN and grant required privileges
No errors.
Create core schema..
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
DECLARE
ERROR at line 1:
ORA-04043: object HA_HOST_CREDS_ARR does not exist
ORA-06512: at line 14
How can I correct this so the repository install progresses?
Thanks!
Edited by: Timothy from Minneapolis on Jan 18, 2011 1:04 PM
Edited by: Timothy from Minneapolis on Jan 18, 2011 1:05 PMHi,
the missing object is a "table-type" object which you can create with the statement:
CREATE TYPE "SYSMAN"."HA_HOST_CREDS_ADDR" AS
TABLE OF "SYSMAN"."HA_HOST_CREDS_OBJ"
But this will work only if the "object-type" object HA_HOST_CREDS_OBJ exists. If not, here's the statement:
CREATE TYPE "SYSMAN"."HA_HOST_CREDS_OBJ" AS OBJECT ( "CRED_SET"
VARCHAR2(32), "PASSWORD" VARCHAR2(256), "USERNAME"
VARCHAR2(256) )
I'm not sure why this objects don't exist - the belong to the user SYSMAN and should get created when creating the user SYSMAN...
HTH -
Object dba_tablespaces does not exist
Hi,
after db restore (cold backup, noarchived log mode, OS -AIX backup) I receive:
user is sys
SQL> desc dba_tablespaces;
ERROR:
ORA-04043: object dba_tablespaces does not exist
SQL> desc all_tablespaces;
ERROR:
ORA-04043: object all_tablespaces does not exist
user_tablespaces is ok
Any suggestions?
Thx,
DobbyWhat stage is your instance in, MOUNTED?
SQL> shutdown abort;
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 404723928 bytes
Fixed Size 735448 bytes
Variable Size 234881024 bytes
Database Buffers 167772160 bytes
Redo Buffers 1335296 bytes
Database mounted.
SQL> desc dba_tablespaces;
ERROR:
ORA-04043: object dba_tablespaces does not exist
SQL> alter database open;
Database altered.
SQL> desc dba_tablespaces;
ERROR:
ORA-04043: object dba_tablespaces does not existIf you describe dba_* views at mount stage you cannot query them even after opening the database. You need to restart again.
SQL> shutdown abort
ORACLE instance shut down.
SQL> startup mount
ORACLE instance started.
Total System Global Area 404723928 bytes
Fixed Size 735448 bytes
Variable Size 234881024 bytes
Database Buffers 167772160 bytes
Redo Buffers 1335296 bytes
Database mounted.
SQL> alter database open;
Database altered.
SQL> desc dba_tablespaces
Name Null? Type
TABLESPACE_NAME NOT NULL VARCHAR2(30)
BLOCK_SIZE NOT NULL NUMBER
INITIAL_EXTENT NUMBER
NEXT_EXTENT NUMBER
MIN_EXTENTS NOT NULL NUMBER
MAX_EXTENTS NUMBER
PCT_INCREASE NUMBER
MIN_EXTLEN NUMBER
STATUS VARCHAR2(9)
CONTENTS VARCHAR2(9)
LOGGING VARCHAR2(9)
FORCE_LOGGING VARCHAR2(3)
EXTENT_MANAGEMENT VARCHAR2(10)
ALLOCATION_TYPE VARCHAR2(9)
PLUGGED_IN VARCHAR2(3)
SEGMENT_SPACE_MANAGEMENT VARCHAR2(6)
DEF_TAB_COMPRESSION VARCHAR2(8)
See Metalink note 296235.1 (ORA-4043 ON DBA_* VIEWS IF THEY ARE DESCIBED IN A MOUNT STAGE). -
Number range for object BANF does not exist
Hi Guru's
I have been trying to convert the Planned orders to Purchase requisition and unfortunately the system consistantly giving me the error as reflected below despite changing the numbering range on the affectred documents. Please help.
Number range for object BANF does not exist
Message no. 61501
Diagnosis
The system cannot create a document for an MRP element if no number range or interval has been maintained in Customizing of MRP or if the number range you have maintained is not allowed.
Below is a list of MRP elements that are affected:
Number range object MRP element
PLAF planned order (operative oder simulative)
EBAN purchase requisition
RESB dependent requirements
MDSM simulative dependent reqmts (long-term planning)
MDTB MRP listHello,
You can define number range for Purchase requistions in OMH7 transaction agaist each number range number and you assign can assign these number range number to your purchase requistion document types in SPRP >> Materials management >> Purchasing >> Purchase requistion >>Define doucment type.
E.g for NB doc type number range number is 20
and in OMH7 number range number 20 has interval from- 2000000000 to 2099999999
same way
for RV doc type number range number is 21
and in OMH7 number range number 21 has interval from- 2100000000 to 2199999999
Regards,
Shailesh
Maybe you are looking for
-
Collapsible Panel Open/Close
Currently my tab text "See What Everyone's Talking About" will open and close the panel. I would like to assign an image inside the panel to also close the panel after it has opened. So, essentially the current tab would open and close the panel and
-
I am unable to delete whole texts from left-swipe. i click delete and they dissappear. But then i can't send or recieve texts. i reboot phone and deleted message reappear, but i am able to continue send/recieving texts.. i've synced, backup, everythi
-
How Can I install Solaris on a new Machine
I'm not familier with any sun products. When I tried to install the Solaris 8.0 on a new Sparc Machine I couldn't make the system to boot from CDROM. In response of my command : boot CDROM -s I recieved this messgae: Can't open boot device
-
When trying to join a webinar I get an error message that Safari can not find Java. I deleted Java and reloaded it. Chrome does not have a problem accessing Java. I am on a PC with windows Vista
-
I have problem with the sound entry. The imac does not recognize next sound internal microphone and external microphone). I have checked the configurations. Everything looks like OK but it does not bring in sound. Can they help me? I have Snow leopar