Vertical Scroll Reload on Table Control

Hello,
I've created a couple table controls in ABAP for a custom transaction that is going to be run through the web portal. My problem is that the horizontal scroll on the table is handled on the front end, and the vertical scroll is handled in the program. This means that moving the vertical scroll bar is much slower and not as user friendly as the horizontal one when run on the web (where it has to hit the back end and refresh the screen every time it's moved). I don't think there is anything I can do about that, but on behalf of my customer I thought I'd check to see if anyone here knows any settings or any way to run vertical scrolling without hitting the abap code.
Thanks,
Nathan Beeler

You might also look at the<a href="http://help.sap.com/saphelp_webas630/helpdata/en/24/ef243a84da356be10000000a11402f/plain.htm">ITS Service Parameters</a>. I'm thinking of ~AUTOSCROLL.
Rob

Similar Messages

Remove vertical scroll bar from table control

hi,
i had used table control in my application. i want remove vertical scroll bar from table control.
At initial time in table control there is no vertical scroll bar. In my table control lines are dependent on internal table which i was used to fill it.
i was used these code for to set table control lines.
DESCRIBE TABLE IT_RISK_ZINRISEXC LINES EXC_LINE.
TC_RISK_EX-LINES = EXC_LINE .
Initially there is no data in internal table so there is no vertical scroll bar. After getting value i am filling internal table. and there is scroll bar in my table control. but i does not want that.
i was not selected RESIZING-VERTICAL OR -HORIZONTAL.

Hi,
From Scroll Bars in Table Control
You can remove the scroll bar in the table control by switching off horizontal and vertical scrolling in the properties of the table control. The properties can be accessed from the screen painter by double clicking on the table control. Regarding the page up and page down functions, I believe you add those buttons in the screen layout and code for them. You can use the standard function code for the page up and page down functions.
or
You can get rid of the vertical scroll bars by not setting table control lines. This way the user can only see the visible lines of the table control. As for the horizontal scrollbar, just make sure that your table control doesn't contain too many fields.
Regards,
Raj.

Vertical Scroll in Dynpro Table Control

Hello,
I am currently having an issue with the vertical scroll control in my classic dynpro table. When I scroll down it will scroll past the first record and then freeze. I cannot scroll back up to the first record. If I try to scroll down it jumps many records and then will not let me scroll back. I have compared the coding from this screen to one that works and cannot find any differences. Is there somewhere else I should be looking? Has anyone else experienced this issue?
Thanks,
Jereme

Check out this example program.
REPORT demo_dynpro_tabcont_loop.
CONTROLS flights TYPE TABLEVIEW USING SCREEN 100.
DATA: ok_code TYPE sy-ucomm,
      save_ok TYPE sy-ucomm.
DATA: itab TYPE TABLE OF demo_conn,
      fill TYPE i.
      TABLES demo_conn.
DATA: lines TYPE i,
      limit TYPE i.
SELECT * FROM spfli INTO CORRESPONDING FIELDS OF TABLE itab.
CALL SCREEN 100.
MODULE status_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
DESCRIBE TABLE itab LINES fill.
flights-lines = fill.
ENDMODULE.
MODULE fill_table_control OUTPUT.
READ TABLE itab INTO demo_conn INDEX flights-current_line.
ENDMODULE.
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE read_table_control INPUT.
lines = sy-loopc.
MODIFY itab FROM demo_conn INDEX flights-current_line.
ENDMODULE.
MODULE user_command_0100 INPUT.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
    WHEN 'NEXT_LINE'.
      flights-top_line = flights-top_line + 1.
      limit = fill - lines + 1.
      IF flights-top_line > limit.
        flights-top_line = limit.
      ENDIF.
    WHEN 'PREV_LINE'.
      flights-top_line = flights-top_line - 1.
      IF flights-top_line < 0.
        flights-top_line = 0.
      ENDIF.
    WHEN 'NEXT_PAGE'.
      flights-top_line = flights-top_line + lines.
      limit = fill - lines + 1.
      IF flights-top_line > limit.
        flights-top_line = limit.
      ENDIF.
    WHEN 'PREV_PAGE'.
      flights-top_line = flights-top_line - lines.
      IF flights-top_line < 0.
        flights-top_line = 0.
      ENDIF.
    WHEN 'LAST_PAGE'.
      flights-top_line = fill - lines + 1.
    WHEN 'FIRST_PAGE'.
      flights-top_line = 0.
ENDCASE.
ENDMODULE.
It has the following flow logic:
PROCESS BEFORE OUTPUT.
MODULE status_0100.
LOOP WITH CONTROL flights.
    MODULE fill_table_control.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE cancel AT EXIT-COMMAND.
LOOP WITH CONTROL flights.
    MODULE read_table_control.
ENDLOOP.
MODULE user_command_0100.
Regards,
Midhun Abraham
Edited by: Midhun Abraham on Oct 2, 2008 5:23 AM

Issue while vertical scrolling in the table control

Hi,
i have my table control which can show 14 entries at a time. and i have almost 100 entries in table control.
now if i selected 2 entries in the visible part.
now scroll vertically.
again come back to see the selected records now they are unselected.
please respond soon.
Thanks
Malya

Hi,
I have redone the scenario and follow the steps it will work....
STEP 1: Create an internal table with field for selection in table.
STEP 2: Assign the selection field in the table control for the line selection.
STEP 3: Now whenever the line is selected, the selection field will have a field 'X'.
STEP 4: In PAI Modify the table fields those are selected with 'X'.
STEP 5: Set a flag in PAI, flag = 'X'.
STEP 6: In PBO set a condition .         " We set a flag so that we fetch the data only once.
If flag NE 'X'.
Fetch data.
endif.
Data:
      begin of ztable,
         ID type char4,
         Name type char30,
         Sel type c,
      end of ztable.
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
LOOP AT ITAB INTO FS WITH CONTROL EMP CURSOR W_I.
    MODULE UPDATE.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT ITAB.
MODULE APPEND.
ENDLOOP.
MODULE USER_COMMAND_0100.
INCLUDE YMODTOP                                 .    " global Data
*&      Module UPDATE OUTPUT
*       text
MODULE UPDATE OUTPUT.
MOVE FS TO FS.
ENDMODULE.                 " UPDATE OUTPUT
*&      Module STATUS_0100 OUTPUT
*       text
MODULE STATUS_0100 OUTPUT.
IF FL_FLAG <> 1.
    SELECT * FROM ZTABLE INTO CORRESPONDING FIELDS OF TABLE ITAB.
ENDIF.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module append INPUT
*       text
MODULE APPEND INPUT.
MODIFY ITAB INDEX SY-STEPL FROM FS TRANSPORTING SEL .
FL_FLAG = 1.
ENDMODULE.
Thanks&Regards
Sarves

Vertical scroll bar in table control with wizrads

Hi,
Im working on a table control with a customised table. I created a table control with wizards. But vertical scroll bar is not working. How can i invoke vertical scroll bar and can any one provide the code for the all the operations on a table control like save,find,find next,change....Thanks in advance.
Avinash

Hi Avinash
move the records number of your internal table into field LINES of tablecontrol. So you should change the code generated by wizard in PBO, for example create a new module:
PROCESS PBO
MODULE SET_DATA_TO_T_CTRL.
LOOP..
ENDLOOP.
MODULE SET_DATA_TO_T_CTRL.
DESCRIBE TABLE ITAB LINE SY-TABIX.
<TABLECONTROL>-LINES = SY-TABIX.
ENDMODULE.
Max

Issue in vertical scroolbar on the table control

Hi All,
I am not able to get the vertical scrollbar on the table control iuf line items increase in number. Please help me in solving the issue.
Thanks
K Sharma

Hi,
In se38
CONTROLS: TCTRL_PHONELIST TYPE TABLEVIEW USING SCREEN 100.
MODULE STATUS_0100 OUTPUT.
   DESCRIBE TABLE itab_PHONELIST LINES LIN.
TCTRL_PHONELIST-lines = LIN.
ENDMODULE.                 " STATUS_0100 OUTPUT
MODULE EXTRACT_USERDATA INPUT.
   lines = sy-loopc.
ENDMODULE.                 " EXTRACT_USERDATA INPUT
In se51
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
PROCESS AFTER INPUT.
LOOP AT ITAB_PHONELIST .
              MODULE EXTRACT_USERDATA.
ENDLOOP.

Scroll bar in table control without wizard

Dear All,
I have made a module pool program for gate pass. In which i have taken a TABLE CONTROL WITHOUT WIZARD. Now my problem is , the table control does not have the SCROLL BAR functionality. It is not showing the scroll bar also. So can any one of you can help with the code that i can use to bring that scroll bar.
Table control is without wizard.
Thanks & Regards
Vijju

Hi,
In PBO module write the code as,
    data: fill TYPE i.
    DESCRIBE TABLE itab LINES fill.
flights-lines = fill.
   Flights is the table control name in screen and itab is the internal table name.
Regards
Haritha
Edited by: Haritha Teegala on Jan 6, 2012 7:53 AM

How to activate the Vertival Scroll Bar to Table control

Hi All,
I Have created a Module pool table control(Wizard) with Input control,where user can enter the values in the screen.
In my screen 15 lines are visible,once i enter all 15 rows,vertical scroll bar is active,but rest of all lines are in deactivate mode.
My requirement is:Once i enter all the visible lines,the remaining lines should be in activ mode(In put control).
I appreciate your response.
Best Regards,
Seshadri

DATA : BEGIN OF IT_MARA OCCURS 1,
       MATNR LIKE MARA-MATNR,
       ERSDA LIKE MARA-ERSDA,
       ERNAM LIKE MARA-ERNAM,
       MTART LIKE MARA-MTART,
       MBRSH LIKE MARA-MBRSH,
       V_FLAG TYPE C,
       END OF IT_MARA.
DATA : WA_MARA LIKE it_MARA .
CONTROLS TABLE TYPE TABLEVIEW USING SCREEN 100.
MODULE POPULATE_100 INPUT.
CASE SY-UCOMM.
    WHEN 'DISP'.
      SELECT MATNR
             ERSDA
             ERNAM
             MTART
             MBRSH FROM MARA INTO WA_MARA .
        APPEND WA_MARA TO IT_MARA.
      ENDSELECT.
      DESCRIBE TABLE IT_MARA LINES V_TEXT.
      TABLE-LINES = V_TEXT.
      CLEAR IT_MARA.
Regards..
Balaji ( assign if this helps u ..)

Scroll Bars in Table Control

Hi,
How do I remove the vertical and horizontal scroll bars in the table control? I would like to use the Pg Up/Down buttons instead.
Thanks,
Mounika.

Mounika,
You can add or remove the scroll bar in the table control by switching off horizontal and vertical scrolling in the properties of the table control. The properties can be accessed from the screen painter by double clicking on the table control. Regarding the page up and page down functions, I believe you add those buttons in the screen layout and code for them. You can use the standard function code for the page up and page down functions.
Regarding the Page up Page down...You need to add some extra code in your program to activvate that. Check the following program for example.
DEMO_DYNPRO_TABCONT_LOOP_AT
or try something like this
try something like:
CASE sy-ucomm.
WHEN 'P+' OR
'P++' OR
'P-' OR
'P--'
CALL FUNCTION 'SCROLLING_IN_TABLE'
EXPORTING
entry_act = tc-top_line
entry_to = tc-lines
last_page_full = 'X'
loops = loops
ok_code = sy-ucomm
overlapping = 'X'
IMPORTING
entry_new = tc-top_line
EXCEPTIONS
no_entry_or_page_act = 1
no_entry_to = 2
no_ok_code_or_page_go = 3
OTHERS = 4
ENDCASE .
Hope this helps
Vinodh Balakrishnan

How to handle scroll bar in table control in bdc

hi friends,
how to handle scroll bar coding in table control in bdc
Thanks & Regards,
Srinadh D

hi,
check the sites :
table control scrolling:
Scrolling in table control
Re: scrolling in table control
Table control - Vertical scrolling problem
table control scrolling problem

BDC_OK code for scrolling in custon table control

Hi All,
I have a requirement to create a BDC program for transaction ME31K, but the problem is this ME31K transaction is enhanced adding a custom screen which has three custom table controls. Now this screen is also included in the BDC program.
I am facing problem in tracking the BDC_OKcode for scrolling for these custom table controls. Tried with '=P+' but not working.
While recording it is capturing '/00' for scrolling but while executing through program it is not working.
If anybody has faced this situation before please suggest how to go about it.
Please note '=NP' is not avaiable as it is a custom screen.
Thanks in advance.

go on the screen where you have table control, put /h in command field.
now scroll in table control, this will go in debugger and now check sy-ucomm.
hope you get it.

Urgent!!!!Add a Horizontal Scroll Bar for Table Control

Hi Experts,
I want to have a Horizontal Scroll Bar on my Table control.
I tried with few properties for the Table UI Element but not able to solve it.
If any one who had already done this please help me out.
Thanks in advance..
Regards, Kishore K

HI Koen,
Thanks for early Reply.
When I use this I get
Page Down ( ->!!, Arrown with lines pointing Down)
Page UP
Page Top ( ->, Arrown with lines pointing Top)
Page Down ( ->, Arrown with lines pointing Down)
But I need only Page top and Page down for this Table UI .
I think my question is clear enough.
Please let me know this also.
Thanks & Regards,
Kishore K

Vertical Scroller in ADF table

hi,
Can anyone tell me how to add vertical scroller/scrollbar for ADF table?
Thanks,
Senthil

Thanks for your replies.
(i) i tried setting scrollbar for IFrame, the scrollbar didn't appear. and in addition to that, the af:table doesn't come inside the frame. the frame comes separately below the actual table
my jsp code :
<afh:body >
<h:form>
<f:verbatim>
<iframe scrolling="yes">
<af:table>
</af:table>
</iframe>
</f:verbatim>
</h:form>
</afh:body>
(ii) With div tag, is it possible to get the vertical scroller alone. i am trying to get rid of the horizontal scrollbar. am exploring the options.

Unable to scroll down in table control screen .

Hi techies ,
am attaching the table control screen .
am not able to scroll down in that .
and also may i know the reason why am not able to tick the checkbox ?
it seems in disable mode .

Hi Ajay,
It was the only reason, ever i have faced...
And other possibility is regarding tbc-lines, but i saw that you were doing this using describe table.
Sometimes the table control will not show all the records in internal table(case while changing number of records in internal table each time )..
At this case you have to set the lines in TBC.. using
describe table itab lines tbc-lines.
tbc-lines is very useful, if you want to enable a new blank line in table control, just do this
tbc-lines = tbc-lines + 1.
Explore all properties of table control it is very useful.
I think, i could solved your issue.. thanks for your appreciation.
Regards
Sreekanth

How to get vertical scrolling in the table

Hi Experts,
Appreciate your help. I have created table in the screen but couldnt get the vertical scrolling option. It was able to get the horizontal scrolling but not vertical. Can you please guide me how to get it.
Thanks

Hi,
Vertical scroll bar will come automatically if more entries are maintained in the table.
Hope this helps,
Reward points if helpful,
Thank You,

Vertical Scroll Reload on Table Control

Similar Messages

Maybe you are looking for