Very bad bluetooth connection with car

I also have major back ground noise when connecting new 2730 classic (Software 10.40) to blue tooth in car (Mercedes C204) I tryed it with with some other Mercedes (E-Class an B-Class) and my old Medion Navigation system - same problem- can't understand one word! My colleagues have the same problems So I wrote to Nokia support - No answer!!!! Has anyone a solution??? ....

Hi luca-ben, welcome to the community!
Try clearing the data for SmartConnect on your device, just go into Settings > Apps > All > scroll down to SmartConnect and tap it > tap Clear data. You can also un-pair & re-pair the devices again to see if that helps, otherwise try contacting Philips to see whether they have any troubleshooting ideas. Keep us updated
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

IOS6 bluetooth connection with car stereo

With my iPhone 4S running iOS5, my after-market car stereo bluetooth was able to read my song name, artist name, ect. Now that I upgraded to iOS6 my Kenwood receiver cannot read this data while connected via bluetooth. Since the data can't be read, the steering wheel control to search/skip a song forward or back also no longer works. I tested the car stereo last night with an iOS5 phone and it worked correctly, so I know the problem is related to the bluetooth iOS6.

Dear Valued Pioneer Customer:
We would like to inform you of the availability of an optional Bluetooth® firmware update (HW05-SW01.27.20) that enables Bluetooth AVRCP control and metadata display from a compatible Pioneer CD or DVD Receiver when used with an iPhone® 5 or iOS 6 device. If you do not own an iPhone 5 or iOS 6 device, there is no need to install this update.
This firmware update may be used only with the following 2012 Pioneer products:
CD Receivers
DVD Receivers
DEH-P8400BH
DEH-P9400BH
DEH-80PRS
AVH-P2400BT
AVH-P3400BH
AVH-P4400BH
AVH-P8400BH
In order to perform this update, the following items are needed:
A Pioneer CD or DVD Receiver above with built-in Bluetooth
Laptop with built-in Bluetooth running Windows® 7
Bluetooth firmware update (HW05-SW01.27.20)
How to Obtain the Free Firmware Update
1. Download the INSTRUCTIONS for the optional Bluetooth firmware update (HW05_SW01.27.20).
2. Download the UPDATE FILE to a computer and transfer the file to a compatible 2012 Pioneer CD or DVD Receiver via a Bluetooth-enabled Windows 7 laptop.
You can also arrange for Pioneer to update your 2012 Pioneer CD or DVD Receiver by calling Pioneer Customer Service toll free at 800-421-1404 during regular business hours (M-F 10AM-7:30PM Eastern Time, except on holidays). If this firmware update is performed by Pioneer, there is a charge of $60.00 (this charge includes return shipping of the updated unit within the U.S.). Charges for removal/reinstallation of the unit and shipment to Pioneer are the customer’s responsibility.
How to Determine if the Firware Update has Already been Installed
CD Receivers:
• With the unit turned off (press and hold the source button until the CD Receiver turns off), press and hold the center of the volume knob to bring up the Settings menu → rotate the volume knob until "BT Version Info" is displayed and then press the center of the volume knob → The firmware version should show HW05-SW01.27.20.
DVD Receivers:
• With the unit turned off (press the home button and select ‘OFF’ from the source icons), press the home button → Press the “System” icon at the bottom of the screen → Select the “Bluetooth Version Info” option → The firmware version should show HW05-SW01.27.20.
If the Bluetooth firmware version shows HW05-SW01.27.20, no further action is necessary.
Questions
If you have any questions, please contact the Pioneer Customer Service Center toll free at 1-800-421-1404, Monday through Friday, 10:00 a.m. to 7:30 p.m. (Eastern Time), except on holidays.
Sincerely,
Pioneer Electronics (USA) Inc.

N95 Bluetooth connection with car

I drive an AUDI A6. Before I got my N95 I had a Sony/Ericsson i800. When I connected this phone with my car (Bluetooth), everything can be done from the car environment such as lookin for phonebook entries, selection of entries, dialing etc.
With my N95 I can connect with my car and I can use the hands-free speeking system ... but only this! I can't read any phonebook entry, calling list etc.
Is there any trick to open the phone directory for use in bluetooth mode?
Best regards and thanks in advance.
Sunni

Having just bought a new Audi A6 Le mans 3.0tdi quattro Avant - I was keen to find a solution to this bluetoth/phonebook problem. I too have the Nokia N95 and can confirm that the above link works 100%. Firstly you need to have Nokia PC Suite installed on you PC & phone .. then download the application and save to your pc. With your phone now connected to your pc.. download the saved application to the phone... [ make sure bluetooth is off and not paired to your car ]
Once installed on your phone - go to your car & connect/pair via bluetooth.... go to applications and run the application. It took a couple of minutes "processing " .... then switches to " transferring " ... again a minute or so.... Job Done.. My phone book is now integrated with the car and the MMI.
Thanks for the above link. http://europe.nokia.com/A4143881
It's the 2nd one down.....ie
Nokia 810 Contact Download Application for Nokia S60 3rd edition devices Download now
Nokia_810_Contacts_Download_S60_3rd.sis
103.80 KB | English
This contact download application enables you to download the contacts from the following Nokia phones to your Nokia 810 Car Phone via Bluetooth technology: Nokia E50, E60, E61, E61i, E62, E70, E90 Communicator, N71, N73, N77, N75, N76, N80, N91, N91 8GB, N92, N93, N95, 3250, 5500 Sport, 5700 XpressMusic, and 6290.Message Edited by audinut on 16-Oct-200703:19 PM

Bluetooth Connection with Car - Ipod plays automatically for some reason?!?

When I start my car (Ford Fiesta), the Bluetooth connects fine to my Iphone, but for some reason the Ipod also starts to play the last track played? This is really annoying because not only does it affect my battery life when I forget, but I also lose my place if I've been listening to an audiobook. Can anyone help please??!!

Looks like this is related to this issue
/t5/Nokia-with-Windows-Phone/Lumia-800-Opel-vauxhall-CD400-bluetooth-problem/td-p/1332963
The Lumia doesn't support SAP (Sim Access Profile) that some Handsfree kits use
If this Post is helpful. A click on the White Kudos star is always Appreciated
Last Nokia: Nokia Lumia 800
Current Phone: A Non Nokia Device
Previous Phones:Don't Ask ;-)

Iphone 3gs with ios5 update. bluetooth connection with car problem.

I updated my iphone 3GS to IOS5. After the update, the bluetooth (handsfree) connection to my car (Lexus RX350) does not work anymore. I can connect any other cell phone bluetooth to my car. Only iphone after the IOS5 update is failing. Any suggestions (I reset many times)?

Some people havent had one problem when updating to iOS4, others have been over run with problems. I myself have lost virtually all sound from my loud speaker so calls, txt messages and ipod are virtually unheard now..
Went to my local Genius bar in Liverpool today, complete waste of time, the guy restored it like I hadnt already done that a 100 times, then said oh yeah it is qeit not heard of that one before, to get a new one will cost you £139!!
Yeah right mate, not payin that as its not my fault! did ask him if he ever looks on the Apple forum about faults people are having, and I got a blank look. Told him a thread with tens of thousands people all having the same problem with low sound from the speakers and calls being ended in mid conversation since updating to OS4 seems a bit strange then... another blank look!
Ive lost all faith with apple as a company now and will not be upgrading to a iPhone 4 anytime soon or any apple product, no one seems interested in helping but quick enough to take your money, thats my opinion anyway..
Gaz

Bluetooth connectivity with car

I have recently changed to a Nokia 7230 and when I connect via Bluetooth to my car (Grand Cherokee) with a MyGig system some numbers do not sync across to the telephone address book in the car. I have a 2nd 7230 and the same applies, I have tried a different car at the dealers same problem, so it appears to be a phone compatibility issue. Reverting to my old phone works ok. Any suggestions or ideas greatly appreciated.
Thanks
Les

mch44120 wrote:
Je possède un Nokia 7230 et lorsque je veux le connecter à mon Peugeot 3008 (Wip Nav) via BT, je ne peux âs accéder à la totalité du répertoire. Certains noms sont ignorés, seuls les numéros apparaiseent. Quelqu'un aurait-il une idée ? Merci par avance
No French, please.
I own a Nokia 7230 and when I connect it to my Peugeot 3008 (Wip Nav) via BT, I can't access the entire directory. Some names are ignored, only the numbers appear. Does anyone have any idea? Thank you in advance
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

E51 Drops Bluetooth connection with Car Radio afte...

Hi Guys,
Just wondering if anybody has seen this before. It seems like a few people are seeing this but I have yet to find a solution. My phone pairs perfectly and works as it should for about the first 30 mins, then for no reason, it drops the bluetooth connection and I either have to power my phone or radio on/off. This is very annoying as it has now dropped the call too and I am force to redial.
Sometimes it does not even last 30 mins, and might happen after only 10 mins or so.
Any ideas would be great.
Thanks.

Yes, I have a similar problem which is a real pain if the call is dropped mid-conversation. Have you installed the MS Exchange email client from Nokia because that may cause a disconnect during a poll update.
Other than that I can't suggest anything, except it would be good to get a solution to the problem!

Bad bluetooth connection with philips

After bluetooth pairing with my Philips Fidelio E5 (CSS7235Y/12) you can't hear music. The sound is so bad, you can't understood anything. You hear only scratching and static noises. It's the same with my xperia tab 2(lollipop 5.0.2) but not with the xperia z(kitkat 4.4.4) from my son and phones from other manufactures...

Hi luca-ben, welcome to the community!
Try clearing the data for SmartConnect on your device, just go into Settings > Apps > All > scroll down to SmartConnect and tap it > tap Clear data. You can also un-pair & re-pair the devices again to see if that helps, otherwise try contacting Philips to see whether they have any troubleshooting ideas. Keep us updated
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Nokia E5 bluetooth connection with car

When I connect my E5 with Toyota over bluetooth I can't prevent autoanswer - my phone automaticaly answers after 2 seconds. I tried other phones (Sony Ericsson and Nokia E52) and with them there were no problems.
I tried to disable autoanswer on my Nokia E5 but I couldn't.
Any ideas?
Solved!
Go to Solution.

Just wondered whether under Menu > Ctrl. panel > Settings > General > Enhancement > Wireless car kit = Default and presumably it is here you have set Automatic answer = Off ?
Happy to have helped forum with a Support Ratio = 42.5

Iphone 4 bluetooth connection with car

My iphone4 (iOS 4.2.8) pairs with my 2008 toyota Sienna bluetooth; however, it continues to fail and drops connection after a day. It shows it is paired, but I have to continue to re-pair it to actually get it to work. My ev3 LG phone worked great, so it's not an issue with my car. Any fixes? Is this an iOS problem. I've hear that from the Toyota dealer. They seem hear the issue frequently with iphone users.

It's not just the bluetooth car radio. Lots of problems with bluetooth stereo overall.. My s305 motorola headphones worked fine until I upgraded recently to 4.3.1 now and it's pretty much unuseable. Practically impossible to get to connect, pair, unpair, reset etc.. Sometimes it will connect but then it pretty much disconnects again after a minute or so. Used to work for me most of the time but it's never been great; now it's abismal.
Check this thread out for lots of others with the same problem...
http://reviews.cnet.com/8301-195127-20008764-233.html?refresh=1301768822360&tag=rbcontent;overviewHeadProfile
Message was edited by: unclej2k

Wrong Bluetooth connection with car speakerphone

Yesterday I received in exchange for the Omnia 7 a Lumia 800. The first thing i did was to test the BT Connection to the BT speakerphone in an Opel Astra. Worthwhile the functions are different between the Omnia and the Lumia.
The connection works. But with the Lumia I had no network operator display, no signal strength and can not even call from the car. How can that be for the same operating system? Unfortunately, this point is a big reason for a return of the phone. For me, this is a step backwards, I dare not go into ...
Is this Problem know?
Greetings

Looks like this is related to this issue
/t5/Nokia-with-Windows-Phone/Lumia-800-Opel-vauxhall-CD400-bluetooth-problem/td-p/1332963
The Lumia doesn't support SAP (Sim Access Profile) that some Handsfree kits use
If this Post is helpful. A click on the White Kudos star is always Appreciated
Last Nokia: Nokia Lumia 800
Current Phone: A Non Nokia Device
Previous Phones:Don't Ask ;-)

C7 Bluetooth Connection with car equiment

Hello,
I have recently bought a nice nokia C7 and I am very happy of its functions!
The only problem is that I am not able to connect correctly with my Ford C-Max's bluetooth hand-free equipment:it seems the connection is somehow established, but I can-not hear correctly the person I am talking to via the phone, but if I click on the phone on the "bluetooth activation" while the call is active. Them sometimes,it seems to work properly till the next switch.on/switch off of the phone, others it doesn't work ev en during the same "session".
Does any one have the same problem?
Is there any compatibility problem (I bought me CMAX in August 2009!)? If yes, is there any firmware version for Nokia C7 that solve this problem?
Thanx in advance

Thank you for your reply,
Do you think, that the solution is new update for Parrot device?
As I understand, you still have the problem and your hope is this update eventually.
Do you read somewhere something about this?
I have registration in Parrot forum, but I haven't read inside anything about the problem . It looks, that they never heard about it...

C7 - Bluetooth connection with car kit - problem

Hi all,
Can anyone help me about my problem. I bought new phone Nokia C7 with Anna software and I have a problem with pairing with my car (Bluetooth device Parrot CK3000 Evo). I think that the problem is with phone, because when I paired devices all things work well, but when I turn off the car (Parrot is switched off) and go away, other phones that I previously used disabled connection and can be used normally. But with this phone I see that for the phone connection still present (?!?) The car symbol on display still shown, and when I try to use the phone, I can make call, other people say that they receive calling , but I can't hear them, and they can't hear me. When I manually disconnect Bluetooth device, phone work normally, but when I am in the car again, two devices doesn't initiate pairing, and again I have to do this manually. It' a huge problem for me.
Is there anyone who have the same problem, or anyone who know how to solve this. I couldn't find option to solve this from menus.
Any ideas?
Unfortunately my warranty doesn't allow me to change software version from 022.014 to another... but if this will help...

Thank you for your reply,
Do you think, that the solution is new update for Parrot device?
As I understand, you still have the problem and your hope is this update eventually.
Do you read somewhere something about this?
I have registration in Parrot forum, but I haven't read inside anything about the problem . It looks, that they never heard about it...

Anyone else lose bluetooth connection with car radio since updating to IOS 6?

I've lost consistent connection between my iPhone 4S and car radio (Kenwood) ever since I upgraded to IOS 6. This is apparantly happening to lots of people. I use this bluetooth for hands-free calling on my phone so I'm hoping Apple will come out with IOS 6.1 soon to address this software patch. Others experiencing this with their phones and car stereo systems?

I'm having probems as well. I can make calls and play music but I can only change songs on my iPhone 4S but not with the controls on the car. I was able to do this before the upgrade.

Bluethooth connects with car bluetooth but no sound. This problem started after up dating to IOS 8.0.2. Any suggestion to fix the problem?

iPhone: 5s,
Problem started after IOS 8 up date.
Problem: Bluetooth connection with car indicated: connected.
               Incoming call: no sound (caller's voice) from car speaker.
               Out going call: no ring sound through speaker.
              At random shows calling but can not hangup & no ring sound.
Car: Infiniti G 37    2009.

I uploaded ios 8.0.2 on my iPhone 6 128 GB today 9-29-14 due to problems with Bluetooth talking to my ReSound Linx hearing aids to hopefully fix the problem. It sounds like the Bluetooth looses connection to the hearing aids and turns them off for about 1 1/2 minutes, then they come back on and I can hear again. I understand there are problems with Bluetooth and cars using the phone. I believe this Bluetooth problem is causing my hearing aid problem as my hearing aids connect to the iPhone via Bluetooth and the ReSound Smart App. I tried the reset fix, Settings>General>Reset>Reset All Settings as some have suggested but that did not resolve this issue either. I can't believe Apple is not talking about this ios 8.0.2 Bluetooth problem. This affects my everyday life in that I cannot hear when the Bluetooth drops.Try working with your hearing dropping every few minutes! If Apple wants in the Health field, I suggest they take their QA a little bit more serious than they are at present. Whomever was responsible for testing ios 8, 8.0.1 & 8.0.2 should be fired! This is causing more trouble than anyone can imagine. I understand the car - Bluetooth problem but think about the fact that if every time the Bluetooth drops, you can't hear.My job could be in jeopardy. I posted the problem to Apple Support and they will not even have the decency to respond with even a "we are sorry." How long do I have to go without being able to hear before Apple responds??????

Very bad bluetooth connection with car

Similar Messages

Maybe you are looking for