Very dark prints suddenly

Been using Elements 11 for 8 months - no prob.  PS Elements manages color.  Suddenly, all my prints are coming out darkish blue/green....murky!  I have not done anything different.  I had my printer checked out and it's not that.  I uninstalled Elements and got a new download and still have the issue!  Please help!!

OggieStarr:
Welcome to the Apple Discussions. I've not had problems with my R200 but in the Advanced printer options there are two areas, Color Management and ColorSync.
In the ColorSync section you can select the Lightness Increase Quartz filter to see if that will help.
In the Color Management section you can try several options:
ColorSync
No Color Adjustment
Color Controls where you can try switching from Epson Vivid to Epson standard.
Although the Color Management section will probably affect color it may help in the lightness.
You could also run ColorSync Utility to see if there's anything there you can do to affect lightness thru a color profile.
Color accuracy is usually more difficult to achieve than density. Let's hope it the same in your case.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.

Similar Messages

  • Leopard + Aperture 2 + Epson R1800 == very dark prints

    Hi,
    Before I upgraded to Leopard, I was able to get very nice prints from Aperture on my Epson R1800 printer.
    After I upgraded to Leopard, the prints end up very dark. A bit of additional info follows.
    My monitor is correctly calibrated.
    I installed new drivers from Epson's website (v6.12), and I verified I'm using those, and not Apple's Gutenprint drivers.
    In the print settings I turn color management off, and than select correct ICC profile in the Aperture that matches paper and quality settings. For example, for printing on Epson Premium Glossy paper with PhotoRPM settings, I select "SPR1800 PrmGlsy PhotoRPM.icc" profile. Hit print, and after a bit of time the print comes out of the printer very dark. This sounds like ICC profile got dropped someplace along the way (in Aperture? in driver?).
    If I go the other route, and let driver/printer manage color by selecting either normal or vivid options in print settings, and than use "system managed" setting in Aperture, the prints come out bright (maybe even a bit too bright). However, in this case the colors are off. Very off. Skin tones are especially bad with strong yellowish cast (people on the prints look if they were seriously sick).
    Has anybody managed to get usable prints from Aperture 2 + Leopard combo on Epson R1800? Or any other comparable Epson printer (R800, R2400, new R1900)?
    Searching forums, I found a lot of articles discussing Leopard and Epson printers problems for Adobe products (CS2/CS3/LightRoom), but not much for Aperture 2.
    Unrelated question... I attempted to ask this in Aperture forum, but there was no post link. Do I need something special to be able to ask questions there?

    Well, believe it or not, with the help of Epson support on the phone, I've figured this out. First of all, there is definitely a problem with Aperture's color management. What used to work (setting a color profile in the Aperture print dialog, and selecting "no color management" in the printer dialog) definitely does not work at this point.
    If you want color management, what you have to do is select "System Managed" in the Aperture print dialog, and select "Color Controls - Epson Standard" in the Epson dialog. What this does is select the standard Epson profile for the paper you have selected. For example, if you've chosen Epson Premium Glossy Photo Paper, the printer driver will use the "SPR1800 Premium Glossy" profile (Epson's standard profile for that paper, assuming you've downloaded it). Of course, that gives you Epson's version of what you want to print. If you have created your own profiles, using a spectrophotometer for example, you need to get the printer driver to apply YOUR profile instead of Epson's.
    Here's how to apply your profile: Open Colorsync (in the Utilities folder), and select "Printers" in the Devices menu. Under the printer model, Stylus Photo R1800, for my case, select the profile for the paper you're interested in, say "SPR1800 Premium Glossy", and look on the right side of the window at "Current Profile:". Click the down arrow, and select "Other". Navigate to the profile you've created, and click "Open". This will set the profile you've created as what the printer driver will use when it thinks it's applying the SPR1800 Premium Glossy profile. Set other paper profiles (e.g., "SPR1800 Enhanced Matte") to whatever profile you've created for those papers.
    Now, when you select "System Managed" in the Aperture dialog, and "Color Controls - Epson Standard" in the Epson dialog, it will apply your own profile.
    Hopefully, Apple will fix the problem with color management, and we'll be able to go back to color management as it was before. In the meantime, this is the only work-around I've found.

  • Edited in LR 3 but printed in LR 4 produce very dark prints

    Images I edited in LR 3 and printed in LR 4 all turn out very dark and off color. Images edited in LR 4 and printed from LR 4 print just fine. Can anyone offer me a solution to this issue?

    I have attached 3 photos.
    When I took the photos I shot as both raw and jpeg. I have attached the following:
    https://www.dropbox.com/sh/5ebbdi4o3u14wk3/CZWB8wJcce/Grainy%20Photos?lst
      a.. the original raw photo
      b.. the jpeg that came with it (as is out of the camera)
      c.. the final edited jpeg
      d.. A screen print of the image uploaded to printing lab (It will look grainy around the hair line...but that's the problem)
    I have played around a fair bit. All looks great in LR and when I get out of LR and open them up full screen out of windows explorer they look good too.
    It was only when the bride complained about the blurriness, I then tried uploading the final high resolution file to RGB Digital Labs that you could see how bad they were.
    Last night I was playing around and I tried uploading the jpeg straight out of the camera to RGB labs and that too was bad. So I am starting to think would it be the camera, but then again when they look so good after editing why would they look bad at print time. Photo was taken at f$ 1/200 shutter speed and ISO 320 (so it’s not like I didn’t have light) I had a flash as well
    I think I am going to have a mental breakdown!!!
    So far from what I have found to get the picture looking ok  Sharpness is “0”and luminance is set to 100 – so too extremes which just does not seem right, I have never had to do this before.
    Any help would be great
    Thanks
    Sara

  • Very Dark Prints!!

    Hi, I have a 24" Imac, purchased in March 2009. I have been using Aperture for about 4-months now and finally decided to have some of my images printed by a professional lab. Fortunately they offer a calibration print service for free. So I recieved the prints back today one set colour corrected and the other straight print. What i can see straight away is that the straight prints i.e. no correction are very dark compared to the image on my screen. The colour corrected images are a bit closer to what is on screen i.e lighter. \the process i am using is shooting in AdobeRGB make corrections then export the image 300DPI(requested by lab) Jpeg quality 12, Colour Space SRGB. I am running a Huey Pro calibration tool. I have read on other photographic sites that the Imac's screens are generally far too bright and i may have to use shades software to bring the brightness down to an acceptable brightness. But i am not sure if this will interfere with the Huey calibration. I guess what i am trying to do is match my screen image to my un-corrected print. I am relatively new to photography and very self critical. So any help would be much appreciated!!!

    I used a 24" imac with a Huey pro and got GREAT results before upgrading to a mac pro. Prints ordered directly through aperture where identical to what I saw on screen. Costco prints needed about a 1.05 gamma adjustment in the export dialog.
    When I calibrated the monitor however, I did the following:
    I lowered the brightness to about 25% and I threw a dark sweatshirt over the monitor during calibration to avoid any issues with reflections. You will also want to make sure you are setting your Gamma to 2.2 instead of 1.8.
    Other than that, make sure you use the histogram to confirm your exposure is correct.

  • Very Dark Printing iPhoto 06?

    I have never had a problem printing beautiful images with iPhoto 06 but the first images I have printed (8x10, 5MB file from a 4MP Olympus) show nice and bright on the screen and then show up dark, dull and grey on Glossy paper. I have checked and double checked my settings and they are all the same as before.
    I'm printing to an Epson Sytlus C84.

    I posted in a different thread about this but I will restate more or less. The problem is probably the profile or profiles. Most consumer devices like printers and many cameras use iRGB color space but some software including Apple for years used RGB color space for their profiles. Printing from RGB to iRGB makes a muddled mess of things. Also, many printers nowdays have built in "enhancements" that need to be disabled to get the proper colors.
    My Canon will let me disable the color correction of the Canon driver which gives me very good prints with iPhoto 6. My Epson 1280 is more complicated since it's a better photo printer and GIMP has all kinds of settings. My Epson R200 has the same easy disable color button that the Canon has and all three will print fine with iPhoto so long as I disable all the automatic correction crap and I use the proper screen profile to make sure I "see" what the printer will "see". Many times the display is too warm(redish) or too cold (bluish) out of the box and needs to be dialed in some for the proper coloring.
    Now, if this is all true, and it appears to be at least on my iMac G5, then Apple has crossed a line from easy to use iPhoto to pain in the butt to the less knowlegable digital imagery users. Granted, it gives you much more control over the print but it requires you have a much better understanding of what is really going on with the screen, software, print drivers and printer. For example, the GIMP drivers for the Epson 1280 will let me tune to the particuler ink I have loaded along with everything else. Not what I want to show my father-in-law who has a hard time with the taking of the picture, much less color workflow.
    All of this begs the question if there are significant differences between the LCDs of the old G5 iMac, Cinema displays and the new Intel boxen. I will bet there are which adds to the confusion.
    MikeS
    hackamac.packetattack.com

  • When I am on Firefox, my Netzero email page suddenly dropped to very small print. AOL OK. How do I increase size of the print so I can read the email?

    I was using Firefox to read my Netzero email. The print suddenly dropped down to very small and I have difficulty reading the email. Netzero said to oper Mozilla Firefox, click "tools", click "options", and click "content" to change the font to a bigger size. But when I clicked the brown "Firefox" button on the Firefox page, I do not see the buttons Netzero told me to click. Can you tell me what they are referring to or just tell me how to increase the size of the font when I am reading email on Netzero. AOL email font size was not affected when I clicked AOL to read the email there.

    See this and reset the zoom level there: <br />
    https://support.mozilla.com/en-US/kb/Page+Zoom

  • Photos in iPhoto are suddenly VERY Dark

    I have over 4,000 photos in my iPhoto library and up until a few days ago everything seemed to be working perfectly. But all of a sudden - literally one minute the application was open and everything was working fine and the next minute all my photos looked very dark. In video terminology, they all looked as though the "black was crushed." In other words, where there was once detail was now almost completely in shadow or dark. What would cause something like this to happen? Everything else on my Cinema Display looks fine… in other words I can open the same photo in Photoshop and the image looks the way it should. Any help would be greatly appreciated.
    I might add, that around the same time this happened, my second monitor, and older Apple 17" with the lucite legs, suddenly began displaying EVERYTHING on it slightly darker. I tried running color sync but that didn't seem to help. Repaired permissions. Ran Disk Warrior. Nothing. I just chalked that problem up to old age, but now I wonder if the two aren't somehow related.
    Thanks in advance.
    John

    John:
    Do the photos display the same using another application, like Preview? If yes then boot into another account and view some of the same photos in Preview or a temp iPhoto library.
    If the other account displays them OK then there may be some preference file in your primary account that is bad. Here's a way to week them out.
    Trouble Shooting Preferences in Tiger
    Go to HD/Users/Your_name/Library. Move the Preferences folder (in its entirety) to the Desktop and make a second copy of it so you have Copy A and B. Now try the the application again and determine if problem is fixed.
    If the problem IS fixed, go to the new Preferencess folder that the OS will have created and open it up.
    Open Copy B on the Desktop and select all of the items inside. Drag them into the open new library folder. When the Copy window comes up check the Apply to All check box and then click on the *Don't Replace* button as seen here. That will keep the new files created and bring back all of the others.
    If the problem is NOT fixed, trash the new Prefs folder and move the intact Copy A folder back to the Library folder .
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • MAC OS 10.5.7 and Samsung CLP-610ND color laser printer, images very dark

    Just picked up this printer 3 days ago, set up fine prints word files fine. Any images print very dark. MY main use is printing a pdf newsletter but the print image is so dark it is useless. I have tried print as image. I have also tried a plain jpg from camera and that was also very dark. Talked to Samsung and they said it was my computer and I should return it. Not what I want to do.
    Also I took my pdf file and tried ot on other laser printers that had a Secure digital file reader and the colors were correct some with my HO color inkjet.
    So printing through adobe or preview images are too dark.
    Any thoughts?
    Thanks in advance.
    Message was edited by: blu62vette

    Went back to HP.com and this time was able to see and download latest driver and firmware for HP LaserJet P3005dn  Installation of new firmware was done thru the HP Printer Utility application on my iMac OS 10.7.5
    I was able to choose my printer and then upload the firmware file from the iMac to the printer. This has completely solved the problem!
    Thank you ~graffiti Not sure why I was not able to access the driver and firmware earlier from the HP site but eventually I found it.

  • Epson R300 prints photos very dark and oversaturated

    My Epson R300 recently began printing photos much darker and heavily saturated relative to what I see on my monitor. It seems to print ok directly from a CompactFlash. Photos I printed in the past no longer print good. I tried different programs (iPhoto and Photoshop) and print settings. I replaced all cartridges and reset the driver using Print Setup Utility. Any idea what I can try? Thanks.

    Have you checked that the ColorSync profiles are OK,
    and have not been changed? Use the ColorSync Utility
    to check them.
    This appears to be a printer problem and not a setup issue. The printer worked good for nearly 2 years. The color isn't just a little off. All colors are very dark like too much ink is being delivered to the paper.
    There is a definite red cast to whites in photos. Printing directly from a CF card (bypassing my computer) shows the same problem. I deleted and reinstalled the drivers. Tried all of the various settings. With/without Colorsync, printer color vs photoshop color. Tried iPhoto vs Preview vs Photoshop. Epson Print vs Gimp Print. Replaced all cartiridges. Used different paper types (Glossy Photo, Matte). Very frustrating!
    Is 2 years the lifetime of an inkjet printer?

  • My printer -photosmart plus B210a prints but the photos are very very dark HELP please

    I have a Hp photosmart plus B210a just trying to print out some photos and they are very very dark The photos themselves are light and of a high Dpi any suggestions anyone ??? please they are of my son's wedding so are very important to me 

    What program are you printing from? What operating system? What are the printer settings for paper type and quality?
    If you are printing from a program that allows selection of CMYK or RGB printing then select the RGB setting.  Even though the inks are CMYK the driver is expecting RGB data.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • TS3147 Photos print very dark on HP1025 LaserJet, and solutions?

    Photos print very dark on HP1025 LaserJet color printer. I have installed and reinstalled software several times, both from CD and HP site.
    Asides from going into PhotoShop and manually manipulating each color photo, is there something simpler to correct this problem?
    I have read similar comments on other boards, and have not found a solution. Is this just the nature of the beast for the HP1025 for Mac?

    What system and iPhoto versions are you running?  What type of Mac do you have?  Have you tried calibrating the screen in the System/Display/Color preference pane.
    Does the print window for the HP have any of the options that are shown in this screenshot for Epson or Canon printers?
    If it does you can change the color management and color matching and color management to see if you can get what you want.  Once you do you can save the settings as a Preset like the R280 Color Glossy in the screenshot.

  • Exported pdf images print very dark

    I bought a new color laser printer a Samsung clp-610nd. Samsung support has been awful. The pdf I am trying to print has image, jpgs from photoshop. I use a Macbook Pro. The pdf text prints great, the images are very dark. I can print the pdf on a deskjet and the images are accurate. I am sure this is a color issue but I dont know what I am doing wrong. Any thoughts on where to start?  If I print straight from indesign, the images are also dark. I just dont know enough color profiles to figure this out.

    Stix Hart wrote:
    As you've proved yourself this is a printer problem, not Indesign...
    Ah, but which printer?
    Without a calibrated and profiled monitor there's no way to know if the image is displaying correctly, and consequently of knowing if either printer is rendering correctly.
    Make sure you aren't managing color twice. Either your application or the printer should be using color management, but not both. I prefer to let the application do it if it can.
    You can play with profiles until you are blue in the face, but it will be shooting blind unless you calibrate the monitor first, and it will be even better if you get custom profiles for the printers. The odds are equally good that your inkjet prints light as that the laser prints dark. Most laser drivers also include density adjustments that allow you to print darker or lighter.
    Peter

  • Item on screen appears brilliant color, but printed version very dark and untrue to color.

    I have recently received an invitation file for my wedding invitations which are in a very brilliant shade of purple. However, when I had them printed, they turned out a very dark, almost black/blue color. I converted the file from RGB to CMYK as directed, but no color change was observed. I even tried printing a copy at home and I received the same result. No matter how I play around with the shade, the color doesn't even come close to printing true to on-screen color. What am I doing wrong?!
    -Allison

    The Creative Cloud (this forum) is a delivery and install process
    What specific program are you using under the "umbrella" of the Cloud?
    If Photoshop, ask in Photoshop General Discussion
    If Lightroom, ask in Photoshop Lightroom
    If some other program, ask in the forum for that program
    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • Photosmart 1215 printing pictures very dark

    My Photosmart 1215, which I've had for several years, has started to print my pictures very dark and not true to the picture displayed on my screen.  This is a recent development in the past two months.  I've always had beautiful pictures from it.
    The printer has also started to eat the end of the printed paper if I don't remove it from the printer the second it finishes printing. 

    I too have the same printer, and the same problem.
    I have scanned the net, hoping to find an answer to the problem.
    I have changed the settings on my printer to RGB + 2.2 Gamma.  This does brighten the printed photo, to a degree.
    But in doing so, losing some good colour and contrast.
    Fabulous printer, printing fabulous colour. But not very good at reproducing what I am looking at on my monitor.
    Hope some one can give you and I some useful answers!

  • Pictures are printing very dark

    I HAVE A OFFICEJET 7680 AND PICTURES (JPEGS) THAT I PRINT FROM MY HP COMPUTER ARE COMING OUT VERY DARK.  THERE IS NO ISSUE WHEN THEY ARE PRINTED AT A LOCAL STORE.......

    What model of printer are you using and how are you printing the photos?
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Maybe you are looking for