Very frustrated with my LG G2. My screen freezes all the time when texting. This started after the upgrade. My husband's phone is doing the same thing. We have reset the phones, deleted off pics and videos but nothing helps.
Very disappointed in my LG G2. My screen freezes all the time especially when texting. This started after the update. My husband's phone is doing the same thing. We have done a hard reset, deleted pics and videos to clean up the phone but nothing helps. Any suggestions? Our phones are new.
Lots of Frustration. In some cases the LGG2 is rendered useless even as a phone.
Here is what I did.
Got replacement Phone.
Same problems but I shut down all apps that I purchased even though they worked before KitKat.
Found that If I have both WiFi and LTE Data on at the same time battery chewing stops. Do Not know why.
Then I got 2 CM free utilities. The Clean and Wash utilities. Run them and find the culprits grinding CPU
cycles and running down the battery. Number One is the Verizon Voice Mail service constantly turning on and off
and retrieving data not there. Turn of the extra Voice mail and use the old access with the *6. Unless you have
100 messages a day for business your hosed until this KitKat issue is fixed. Get the CM battery utility.
YOU can see the battery suckers and shut them down when not using automatically.
Start putting back one application at a time you used often and see it they work and if the utilities will tune them
down if they cause problems. The LG will get better but with some limitations.
LG and Verizon have a problem with what was a great phone.turned bad overnight.
whatmorecanyousay
Similar Messages
-
My iPhone 6plus will no longer connect to my Dodge UConnect system. Phone calls get a beep "phone call completed" message. Music will play though. Just can't make calls. Tried turning off iCloud and repairing but nothing works. It did work a few days
Hi Jpcbew,
The article linked below provides a lot of great information and troubleshooting tips that can help you resolve the issue with your iPhone 6 Plus connecting to you car stereo system.
Get help using your iPhone, iPad, or iPod touch with your car stereo - Apple Support
So long,
-Jason -
it keeps saying running out of disk space need to delete some photos and videos but i already cleared out all my photos and videos and it keeps saying the same thing.
Connect the iPod to your computer. Click on the iPod under Devices and iTunes. How large is the "other" category as shown in the colored bargraph? If larger than about 3/4 GB, restore the iPod. That large of "other" indicates corrupted files.
-
can anyone help me in iphone mobile, i had lost my data in phone, because i restore my phone without backup, how can i get my old data, i lost my photos and videos... help me
Sorry Raj,
If you did not back up your information, and you have now restored your phone, then your information is not recoverable.
Sorry,
GB -
I cant find my flashdrive on my macbook air and ive tried mounting going to preferences and utilities but nothing helps any tips?
What is the exact model MBA that you have and what specific flash drive are you referring to?
What the the current OSX that you have installed in your MBA?
Ciao. -
Hi all. When i try open illustrator cs6 i get the following message: to open illustrator cs6 you need to install the legacy java se 6 runtime. This started after i upgraded my mac to yosemite. I tried looking on java site but cannot find anything. Any suggestions?
Justin,
In addition to what mo said, some have found that the page with the direct download link,
http://support.apple.com/kb/DL1572
may turn up blank to start with, so it may be necessary to reload the page. -
Have ticked " Sync only ticked songs and videos" but I Tunes is ignoring that and synching evrything leaving me no further capacity. Please help
Two points to consider:
You have to remember that when you see the option to Sync only ticked songs and videos, iTunes may already have gone past that part of the Sync process. So once you change the setting to Sync only ticked songs and videos, you may need to click on the Sync button in order for a second Sync to take place. On subsequent Syncs, you will not need to do this.
You have actually un-ticked some of the songs in your library, haven't you? -
I just got my iPad, I have an iPod. When I go to put apps on my new ipad it says my apple ID Is disabled. I have reset the passwords. Somehow I have two id's? I've gone into settings for apps signed out and back in with the new p.w. I can't think of what else to do to get the disabled block off. Any ideas?? Thanks
See this Apple document for help...
http://support.apple.com/kb/ts2446 -
After upgrading to Yosemite on my macbook pro,the spinning wheel doesn't go away.I have reset the SMC and the PRAM but the problem still persists.Can anyone please help
Try starting in Safe Mode
OS X: What is Safe Boot, Safe Mode?
Try booting to Recovery and repairing the startup disk
OS X: About OS X Recovery - Apple Support
Reinstall Yosemite
OS X Yosemite: Reinstall OS X
This is the Mac Pro desktop forum. I requested your post be moved to the MacBook Pro laptop forum. -
Hi, whenever I try to transfer music from the itunes to my iPhone 5s it wont work. It simply does not let me drag the music, sinc my music or add it. I have tried everything I have found on the internet. Please help. Thanks
Hi Johnrjohnr,
Here are some images to help you out. Please be sure to first plug your iPhone in or enable "Sync with this iPhone over WiFi" and be running the latest version of iTunes.
1) Select your device from the upper-left corner of iTunes (your application may appear slightly different on a Windows computer). To erase your iPhone, select "Restore iPhone" in the Summary tab of your device. Erasing your iPhone will remove ALL data - including photos, contacts, apps, etc. If you choose to do this, be sure to back up your information to iCloud, iTunes, or another service of your choosing. All apps, movies, music, etc. that you have purchased through iTunes will be available to install immediately after the restore.
2) Remain on the Summary tab. Scroll to the bottom of the screen where you will find the Device Options List. To drag and drop songs to your iPhone, "Manually manage music and videos" must be checked. The remaining items are optional.
3) It appears I was mistaken on the "Advanced" menu, my apologies. It is no longer in iTunes (I believe it was removed with iTunes 11). The option is now located under Store -> "Authorize This Computer..." Selecting this will give your computer full permission to access any content you have purchased through iTunes. I have not personally used podcasts in a few years, but I'd imagine it will apply as well. Sign in using the Apple ID that you have purchased content with and you should have unrestricted access. Keep in mind that you may have up to 5 authorized computers at any given time. To authorize a 6th computer, you will need to go to one of the other machines and select "Deauthorize This Computer..."
I hope this has been of some help to you. Let me know if you have any other questions.
Good Luck! -
I updated my OS to mountain lion and since then my mac book pro is virtually useless, seeng pictures, videos, using graphics applications and Iphoto is impossible, the screen goes black, and the system restarts.
This even happens sometimes at login, the login screen appears then the computer crashes and restarts, sometimes more than once, yesterday it even happened 6 times in a row before I was actually able to enter the password and log in.Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Copy (command-C) the selected text to the Clipboard. Then click anywhere in the Terminal window and paste (command-V). Post the lines of output (if any) that appear below what you just entered. You can do that by copy-and-paste as well. Omit the final line ending in “$”. No typing is involved in this step.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which you do have to type. It won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal. -
MBA keyboard not responding. SMC didn't work.
If the USB keyboard still works after you log in, then the machine needs to be repaired.
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed. -
I shared a message with a friend. After that sharing, I cannot message my friend, Facebook and iPad just kicks me off. I have tried rest allying Facebook, resetting iPad...and still the same. Any suggestions?
Hi Luanfromal,
Thanks for visiting Apple Support Communities.
Be sure to try all of the steps found at this link if the FaceBook application quits unexpectedly on your iPad:
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/ts1702
Regards,
Jeremy -
My pics and videos do not appear in the video browser?
my pics and videos do not appear in the video browser? How do I get it back. I may have denied IMovie access to my pics and videos when opening the app for the first time.
I have the same issue (iPad 3, iOS 6). I have tried to:
-erase all projects on the iMovie
-reset the iPad
-uninstall iMovie and reinstall it
None of these three things worked and I am at lost in terms of what else can be done.
All that happens when I start a new project is that under "videos" there is a big black box (empty videos). Same thing for pictures. When I press the camera button to insert a video from the camera, this works no problem. However, I used to be able to insert videos/pictures from my Camera Roll. -
After updating my iphone 5s ios 7 to ios 7.0.5, i have lost my 3 icons-camera,itunes and videos.
Also i have lost 2 icons in control center -calculator and camera respectively.
can some help me...?
i have tried every thing from restoring to reseting....but was all in vain.Scott Crawley wrote:
But would that still explain why I can't boot into single user mode?
Even before getting to single user mode access and the like the boot process calls on the OS, Scott (in the form of the "BootX" bootloader, which lives at System/Library/CoreServices/BootX.)
You can read more about the boot sequence used in OSX at http://www.kernelthread.com/mac/osx/arch_boot.html and http://www.kernelthread.com/mac/osx/arch_startup.html
These may not be quite up to date, as they were written when Macs were running on PPC chips rather than intel, but essentially the sequence of events is much the same.
http://developer.apple.com/documentation/MacOSX/Conceptual/BPSystemStartup/BPSys temStartup.html should fill in any changes with the new architecture
Cheers
Rod
Maybe you are looking for
-
BO XI 3.0 on RHEL 5.2
Hi everyone, The supported platforms guide says that BO XI 3.0 supports RHEL 4 and higher patches, we are planning to install it on RHEL 5.2, is this installation safe? is this installation supported? Thanks, Fabio
-
Playlists do not show up on iPod Nano 4th G
I've selected a few playlists to sync to my ipod (nano 4G). The songs sync and show up on the ipod alphabetically by title, artist, album, etc., but there are no itunes playlists listed. Is it not possible to play music "by playlist" the way i could
-
Iphone slow to type numbers and letters since downloading ios7
iphone slow to type numbers and letters since downloading ios7
-
i have created numerous mapping in OWB to extract, transform and load data from SAP tables. this of course includes dimension and fact data. i understand that they are ABAP mappings so ABAP source code and an SQL Loader control file will be created f
-
Problem in this FM :SO_NEW_DOCUMENT_ATT_SEND_API1
HI. I am doing a code for mail sending from ABAP to SOST and SBWP(SAP Inbox).Using the function module is SO_NEW_DOCUMENT_ATT_SEND_API1.mail is sending only for SBWP but it is not received in SOST,could you tell me how to find solution for this. Than