Very hard to use LR5 when connected to External TV via HDMI

Hi
I was teaching some post processing today using LR5 connected to a 50" Sony TV via HDMI cable and could barely use LR. It took a few attempts to use the brush or gradient tools.
Did anyone experience this?
Thanks
Micha

After all those iOS 8 updates, Apple proved Apple do not care~ sold the product then don't care~

Similar Messages

  • Display problem when connecting laptop to TV via HDMI

    I have a Satellite L500-19X and when I connect the laptop to my Sony Bravia TV, the display is constantly choppy.
    I've tried changing the refresh rate but that hasn't helped. The HDMI cable shouldn't be the problem because it works fine with my Xbox. The problem is there during both duplicate display and extend display options.
    Anyone else experiencing the same problem and have found a fix?
    Thanks

    > The problem is there during both duplicate display and extend display options.
    And when you see desktop on TV only?

  • Is there any risk to video cards when connecting TVs to iMacs via HDMI cables?

    Just want to know the risks before I do any damage.

    So I assume that if we buy our adapter from an Apple store, then it is the proper one?  I have a Moshi adapter.

  • What's wrong with my macbook pro (15" early 2011) when i connect it with TV via hdmi

    What's wrong with my macbook pro (15" early 2011) when i connect it with TV via hdmi

    Hello Alex,
    It sounds like you are getting excessive CPU usage when connecting an external display via HDMI to your computer. I would try the troubleshooting steps outlined in the article named:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    When using an external display be sure to check the following:
    If you're using an Apple notebook, confirm the AC power cable or adapter is securely connected to the computer and the cable providing power to the display is also secure. It is always good to have your notebook connected to AC power when an external display is in use.
    Confirm display adapters are fully seated in their respective connections and that they are supported models and for the computer and display. Refer to these articles to assist you with adapter compatibility and further configuration information:
    Monitor and Display Adapter Table
    About Mini DisplayPort to HDMI adapters
    Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
    Thunderbolt ports and displays: Frequently asked questions (FAQ)
    Remove all display cable extenders, KVM switches, or other like devices and retest to determine if the issue is resolved.
    Try unplugging the video adapter or cable and then plug it back in.
    If more than one video adapter is in use (or "daisy-chained"), troubleshoot by using only one adapter.
    Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
    If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
    Reset the systemYou can reset the Mac's parameter RAM and SMC.Reset the resolutionStart by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
    Start up in Safe Mode.
    From the Apple () menu, choose System Preferences.
    Choose Displays from the View menu to open the preferences pane.
    Select any resolution and refresh rate that your display supports.
    Restart your computer.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • Is it possible to open a program when connecting an external hard drive?

    Is it possible to open a program when connecting an external hard drive?
    I have a external hard drive with an iphoto library. I just want to connect my drive and automatically see iphoto open! Possible?
    I know there are some action scripts, am i right?

    Ok, here are the steps to take. Doing this involves generating two scripts, the first of which will have the system monitor the attachment of a hard drive, and the second which will conditionally open iPhoto. To make these and set them up, perform the following steps (it is a little involved, but will get you the result you want):
    Script 1: A launch agent to monitor attached hard drives
    1. Open the Terminal utility in the /Applications/Utilities/ folder. Then copy and paste the following command into it and press Enter, which will open up an editor program in the Terminal:
    pico ~/Library/LaunchAgents/iphotodrive.plist
    2. Now copy and paste the following text to the Terminal window in its entirety so it is all entered into the Terminal editor:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
              <key>Label</key>
              <string>local.iPhotoDrive</string>
              <key>QueueDirectories</key>
              <array/>
              <key>WatchPaths</key>
              <array>
                        <string>/Volumes</string>
              </array>
              <key>ProgramArguments</key>
              <array>
                        <string>/Users/USERNAME/Library/iphotodrive.sh</string>
              </array>
    </dict>
    </plist>
    3. Use the arrow keys to navigate your cursor down to the place where it says /Users/USERNAME/Library..., and change the text of "USERNAME" to be the same name as your account home folder. For example, my login name in OS X is "tkessler" so my home folder is also "tkessler," so for me this is what should go in place of "USERNAME" in the text above.
    4. Now press Control-O to save the file, and then Control-X to exit the editor (use Control, and not the standard Command key here).
    Script 2: A shell script to open iPhoto when your drive is attached
    1. Type (or copy and paste) the following command in the same Terminal window to make the second script in the same editor:
    pico ~/Library/iphotodrive.sh
    2. Now copy and paste the following text into the Terminal editor:
    #/bin/bash
    if [ -d /Volumes/"IPHOTODRIVE" ]; then
            open -a iPhoto;
    fi
    3. Again use the arrow keys to navigate, and edit the text IPHOTODRIVE to be the exact name of the drive you would like to spur iPhoto to open. The name will be case-sensitive, and spaces are OK within the quotes.
    4. Again save this file by pressing Control-O, then press Control-X to quit the editor.
    5. Next ensure this new script can be run, so to do this now copy and paste the following command:
    chmod +x ~/Library/iphotodrive.sh
    Now to activate these scripts you can log out of your account and log back in, and they should work as expeted, and will launch iPhoto only when a drive named "IPHOTODRIVE" (or whatever you edited this entry to be) is attached to the system. This procedure will create two files at the following locations on your computer, so to undo it simply remove these two files followed by logging out and back in, and you should be good to go:
    /Users/USERNAME/Library/iphotodrive.sh
    /Users/USERNAME/Library/LaunchAgents/iphotodrive.plist
    If you run into any problems, then write back here and we can figure out if there are any nuance details to cover for your setup.

  • Iphone 4s does not download emails using imap when connecting to smartermail mail server

    iphone 4s does not download emails using imap when connecting to smartermail v2 mail server.
    when I search - the search results show and i can view the emails, but inbox doesnt download emails - says load more messages x read..
    the folders are displaying ok.
    Smartermail 2 is about 10 years old ( im not upgrading as its working fine other than this issue ) imap is fine with other mail clients.
    has anyone else experienced this?

    Just had the exact same issue on iOS 7, SmarterMail Enterprise 6.8
    https://discussions.apple.com/thread/5462200

  • Will my Mac automatically stop using wifi when connected to an Ethernet enabled thunderbolt display?

    Will my 2012 Macbook pro retina  automatically stop using wifi when connected to an Ethernet enabled thunderbolt display?

    Depends.
    If you go in System Preferences / Network, you will see a list of all the network interfaces your current configuration has. If you click on the gear icon next to the minus sign, the drop menu will offer "Set Service Order...". There you can prioritize the order of use: Ethernet above Wi-Fi and wireless will be ignored if Ethernet is available.
    Note that the Wi-Fi card will remain active and associated with an access point nonetheless. It just won't be used for communications by the OS and apps.

  • Issue with 2wire dsl router when connecting power pc g4 via ethernet

    Issue with 2wire dsl router when connecting power pc g4 via ethernet. The 2wire will keep resetting. When I connect my macbook pro via ethernet to the 2wire all is ok, but as soon as i connect the power pc. . . .reset. I have emailed 2wire support. They recommended using a different patch cable. Tried that.. .. anyone else having this issue???? Any help would be appreciated. . .

    Search the discussions for issues with 2wire dsl routers. This has come up before in a discussion I've been involved with, but probably not to do with the MDD. I do remember it being a design issue with the router, something that was done to it before dispatch.
    Let us know if you can't find it and we'll have a look.
    If you afford it, bin the 2wire and go buy something decent like a Netgear.

  • How do I set up my iPhone 4s to sync automatically to iTunes when connected to my iMac via USB?

        How do I set up my iPhone 4s to sync automatically to iTunes when connected to my iMac via USB?  Currently it only syncs when I manually click on sync.
        Somehow I do have my 5th gen. iPod set up to sync automatically with the same iTunes / computer.  But I do not actually see a checkbox for either device.
        (yes, the 'prevent devices from automatically syncing' is unchecked)
    thank you!

    Turn off mobile data?
    Talk to your carrier about the usage increase.
    Googling provides many tips- https://www.google.com/search?q=reduce+iPhone+data+usage&ie=utf-8&oe=utf-8

  • Cannot change display resolution when connected to external display

    On my 2.0GHz 13" MacBook, I have no problem with the display resolution when connecting to external display/projector when I am running in Mac OS, everything work perfectly! But things start to get messy when I am running in Windows VISTA 32 (installed within the Boot Camp 2.1). Whenever I connect to any external display/projector via a MiniDisplay-to-VGA cable, the resolutions on both my MacBook LCD and external display/projector drop to 640x480. And i am not able increase the resolution in the Display Settings. Does this mean that I have not installed the latest version of display drivers? Or is it that Apple did not provide the VISTA 32 drivers (in Boot Camp 2.1) that is compatible with the Mini Display port.

    Cool!
    I'm glad you have it fixed.
    Please resolve the thread so others can find your answer faster.
    Thanks,
    Bifocals
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • When connected to lg monitor with hdmi cable i get no sound

    when connected to lg monitor with hdmi cable i get no sound

    The issue here is that HDMI cables, as the name indicates, carry audio signals to the monitor. Therefore if the monitor has no built in speakers then there will be no sound. If you have external speakers you can plug them into the audio out slot on the back of the monitor and the problem will be solved. 
    However, if the screen does have built in speakers you need to go Control Panel>Hardware and Sound>Manage Audio Devices and set either your headphone jack or the screen to be the default device. And then you ca pick which device the sound will play from. Either yourlaptop speakers or whateer speakers are plugged into the laptop or the Monitor and whatever speakers are plugged into the monitor

  • Cant open web pages when connected to the internet via Telstra's Pre Paid WiFi has anyone else had the same issues works fine with BigPond WiFi

    Cant open web pages when connected to the internet via Telstra's Pre Paid WiFi (this connection is working on other devices) has anyone else had the same issues, works fine with BigPond Wifi

    and now, when i tried to check again my network preference below the airport tab is showing a message that
    "my airport does not have an IP address and cannot connect to the internet!"
    then after seconds it will goes back to the first message that
    "airport has the self assigned IP address etc....."
    i don't know whats going on now!
    airport tab is not showing green color anyway! i'ts always in yellow!
    i tried turning it on and off but nothing happen! HEEELLLLPP!!!!

  • Best settings when connected to am amplifier via digital i/o

    There are all these crazy settings on the creative software and of course my amp has crazy settings as well. Wondering whats the best settings in the software so I am not "double processing" my soud. Seems to me I would want a neutral choice going to my nice amp to start with. something like default to av reciever so the reciever would process an unmodified signal. so not even perhaps make speaker choices dolby choices adc filtering effects et al. Now I know then I wouldnt be taking advantage of the cool software, but once set up a neutral connection I could mess around with the software.
    Any help and or opinion would be wonderful. Over and out.

    @Re: best settings when connected to am amplifier via digital i/ow of note and interesting is my Amplifier Harman Kardon avr320?displays PCM and 96 KHZ, not sure exactly what this means but I will be posting at audiogon and/or AVForums maybe look at audiholics to figure out if I really have the best case scenario here. Somewhere I read I would be better off with just bitstream.....which is what Ibelieve I selected?selected in soundblaster software.....things sound about as good as I can imagine but I'll check back in.
    I think Pandora one only streams at 48khz anyways. Not sure about Netflix. Looks like dvds can have even higher bitrates especially foy stereo. A yi yi, I think I'll just listen a bit to the bits.
    much is explained here, yikes its a heavy read perha
    ps.
    I just glanced.
    http://en.wikipedia.org/wiki/DVD-Audio

  • Is it possible to connect an external camera via bluetooth to the Iphone 4 and use it with Facetime, if not.. why?

    Is it possible to connect an external camera via bluetooth to the Iphone 4 and use it with Facetime, if not.. why?

    Ok, in 2015 is it possible now? I would like to use an iPad and Face to share content between a dressmaker in Asia and a customer in the US, and I would like to attach better camera's than the built-in camera's on the devices.
    Any thoughts? Any updates to the original post?
    Thanks,
    James

  • My Macbook Pro will no longer connect to my tv via HDMI

    Well basically it is in the title, my Macbook Pro will no longer connect to my tv via HDMI.
    I have been using this cable for a long time and works perfectly.
    earlier today i used it to connect my mac up to my parents 4k tv, it worked fine, did what i wanted to do.
    but now when I've come to connect it up to my tv it recognises there is something connected but it won't display anything
    it just says no signal on my tv
    im not sure whether my mac has changed some settings on its own to run on 4k but now to high to run on my 1080p tv
    pretty annoying so any ideas id be very grateful.
    I've already tried
    restarting my mac
    turning tv on and off
    different hdmi ports
    thank you

    Try resetting the SMC and PRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    About NVRAM and PRAM
    Try another cable

Maybe you are looking for