Very slow network printing in Mac os 10.6
Hi,
I am printing to a HP2035n.
A networked printer.
I bought it while I still had 10.5
It worked like a charm - very fast.
I upgraded to Snow Leopard (10.6) with a new hard disk in the laptop.
After this, the printing is very slow. Painfully slow.
The queue window says "Connecting to the printer..." for each and every print job, and this takes 1-2 minutes for each print job.
Once a job gets started, the printer is very fast, 20 pages in a minute or so.
But when I print several print jobs (e.g. bank transactions today) I have to print 40-50 different print jobs, and the printing time takes several hours!
When I put back the old hard disk with the OS X 10.5, the printing goes very fast on the same hardware, network and wi-fi connection on the airport express.
How can I improve this situation?
It is unbearable.
Kim
Try resetting some of the hardware involved (PRAM~NVRAM). See this Apple KB for details, etc.:
http://support.apple.com/kb/HT1379
Can't hurt to try, and apparently this has helped others recently.
Similar Messages
-
Very slow network connection on Mac Pro
I have a FiOS connection and good speeds on my Macbook Pro and iPad. However, my 2010 Mac Pro connects like a dog. I just connected to my yahoo page which gives typical results. On my Macbook Pro it took 3-4 seconds. On my Mac Pro it took 58 seconds for the initial page content to arrive on my screen and 1:40 for the page to be fully loaded. This is typical. It doesn't matter if I connect through ethernet or wireless - same results. It doesn't matter which browser I use.
I ran speedtest and the results were actually better on the Mac Pro - I have no ide why
Mac Pro ping 16 ms DL 30.73 mbps UL 14.28 mbps
Macbook Pro 17 ms DL 20.58 mbps UL 14.22 mbps
2010 Mac Pro, 3.33. ghz 6 core with 32 gb of ram running 10.8.2
Any suggestions.Please read this whole message before doing anything. This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it. Step 1 The purpose of this step is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.” While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin. Test while logged in as Guest. Same problem? After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it. *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing. Step 2 The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. *Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2. -
Very slow network printing to HP C4795 from macbook os 10.5.8
Printing from Windows on bootcamp (same machine) works fine, but on mac os its extremely slow. I worked with HP tech support at nauseum with no resolution. They said to contact apple. I am on a macbook pro and print via wireless network through the apple airport express.
Please help.
Thanks!
PS- I've been reading about a lot of reported problems with mac-HP interfaces. I bought the macbook and HP printer from an apple store, so I hope you can fix this issue. Otherwise its really just grossly poor QA to sell this item to a customer from an apple store, especially a customer buying a mac.Replying YET AGAIN to my own post... :-)
I decided to uninstall and reinstall, bypassing
the wireless setup. I'm now back into USB
mode, and I'm happy. The wireless problems
I've read about on the forums make me sorry
I bought a wireless printer. Oh, well, I'm printing
again! -
Since I changed from Mac OS 9.2.2 to Mac OS X 10.3.9 on my dual 450 Power Mac i am having always the same problem. after some new starts my network speed becommes very slow. internet, printer connection and also when using personal file sharing. Folder of 22MB takes about 1 hour insted of 3 seconds to send from one mac to the other. I was trying on both HD´s and with only security update from CD before using Internet. I also have to repair volume permissions.tried reset of PRAM. tried it with both HD´s separately installed, sometimes it helped for short time. but unfortunately I always get the problem also when I am not using intenet connection after installing 10.3.9 on a completely empty HD (also tried to formate mith zeros). On my other mac´s: G3 (400MHz), G4 (500MHz) PowerBook and Power Mac G4 450(single)
the system is working without any problem. same settings! Only the Power Mac G4 dual 450 I am having this problem. Software like Photoshop, X-Press and also Maxxon 4D are running fast and without problems. Please help me!!!Since I changed from Mac OS 9.2.2 to Mac OS X 10.3.9 on my dual 450 Power Mac i am having always the same problem. after some new starts my network speed becommes very slow. internet, printer connection and also when using personal file sharing. Folder of 22MB takes about 1 hour insted of 3 seconds to send from one mac to the other. I was trying on both HD´s and with only security update from CD before using Internet. I also have to repair volume permissions.tried reset of PRAM. tried it with both HD´s separately installed, sometimes it helped for short time. but unfortunately I always get the problem also when I am not using intenet connection after installing 10.3.9 on a completely empty HD (also tried to formate mith zeros). On my other mac´s: G3 (400MHz), G4 (500MHz) PowerBook and Power Mac G4 450(single)
the system is working without any problem. same settings! Only the Power Mac G4 dual 450 I am having this problem. Software like Photoshop, X-Press and also Maxxon 4D are running fast and without problems. Please help me!!! -
Photosmart D5160 very slow to print
My printer takes forever to print, either from internet or Word doc. Sometimes the computer 'drops' the print request several times before printing as well. I've reinstalled the drivers but nothing has changed. Any suggestions about what I should do next much appreciated.
Hi @EastDevon,
Welcome to the HP Forums!
I understand that your HP Photosmart D5160 is very slow at printing. I am happy to help you with this issue!
For further assistance, I will need to know:
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer test page prints at normal speed or if it is also slow. How To Print Internal Tests.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
In the meantime, please take a look through this guide. The Printer is Printing Slow.
Hope to hear from you soon!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
Very slow network throughput since 2-3 days ago
I've been having very slow network throughput since 2-3 days ago, with no apparent reason.
I see (from what I can tell) no relevant package updates during that period.
Connections are nfs v3 shares, over UTP cat5e gigabit ethernet.
I've been running this setup for many years now, without such issues.
But now, it's as if throughput is capped around 100Mbps.
Is there a way to see - if for some reason - a network adapter has locked to 100Mbps, instead of 1Gbps?
ifconfig does not say anything.
PS: netstat -i does not report any errors over the connection.
Last edited by wantilles (2011-04-12 15:25:52)experiencing the same issue with my wlan0 since update to kernel2.6.38 yesterday night.
Speed tests grant me a download speed of around 50kbps. Should be around some mbit though! How do I find out, why it's acting so slow?
edit: switched to win7 for the moment. Everything is speedy and normal around here. Something is seriously broken in my arch box!
Can this be related to xorg-server1.10.902 or kernel2.6.38? It would also explain the strange issues with pacman lately (like this https://bbs.archlinux.org/viewtopic.php?id=116429 or this https://bbs.archlinux.org/viewtopic.php?id=116696).
More people seem to experience the network issue: https://bbs.archlinux.org/viewtopic.php?id=116738
Any insights?
edit#2: Just got back from win7. Upload speed in Arch is quite okay. Download speed is extremely fucked though. I wonder why? At least now I know why pacman has problems getting package upgrades, etc.
How do I fix a problem with the wlan0 connection? Haven't had any of those before with gnome and Networkmanager. I'm using the ath9k module.
My rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
HARDWARECLOCK="localtime"
USEDIRECTISA="no"
TIMEZONE="Europe/Berlin"
KEYMAP="de"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
MODULES=(ath9k snd_hda_intel snd_hda_codec snd_hda_codec_idt snd_hwdep snd_pcm snd_seq snd_seq_device snd_timer fuse nvidia loop vboxdrv !vboxnetflt !vboxnetadp !vboxguest !vboxsf vboxvideo acpi_cpufreq cpufreq_powersave cpufreq_ondemand !snd_mixer_oss !snd_seq_oss !snd_pcm_oss !snd_pcsp wacom)
#MODULES=(!snd_mixer_oss !snd_seq_oss !snd_pcm_oss !snd_pcsp !vboxnetflt !vboxnetadp !vboxguest !vboxsf)
#MODULES=()
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="davelab"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
# vboxnetflt
eth0="eth0 192.168.0.6 netmask 255.255.255.0 broadcast 192.168.0.255"
INTERFACES=(!eth0 !wlan0 !lo)
#WIRELESS_INTERFACE="wlan0"
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng laptop-mode cpufreq dbus !hal networkmanager !fam !avahi-daemon samba !smbnetfs cups !webmin alsa !mpd crond bluetooth xinetd sensors clamav ntpd !privoxy !tor httpd !tomcat7 mysqld !iptables)
dmesg output:
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.38-ARCH (tobias@T-POWA-LX) (gcc version 4.6.0 (GCC) ) #1 SMP PREEMPT Wed Mar 30 08:47:36 CEST 2011
Command line: root=/dev/sda3 ro resume=/dev/sda3 5
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000008fec0000 (usable)
BIOS-e820: 000000008fec0000 - 000000008fecf000 (ACPI data)
BIOS-e820: 000000008fecf000 - 000000008fee5000 (ACPI NVS)
BIOS-e820: 000000008fee5000 - 00000000a0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000160000000 (usable)
NX (Execute Disable) protection: active
DMI present.
DMI: Dell Inc. Studio XPS 1340/ , BIOS A14 03/25/2010
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x160000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-DBFFF uncachable
DC000-EFFFF write-through
F0000-FFFFF write-back
MTRR variable ranges enabled:
0 base 0A0000000 mask FE0000000 uncachable
1 base 0C0000000 mask FC0000000 uncachable
2 base 000000000 mask F00000000 write-back
3 base 100000000 mask FC0000000 write-back
4 base 140000000 mask FE0000000 write-back
5 base 09FF00000 mask FFFF00000 uncachable
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 000000009ff00000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0x8fec0 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000f7b50] f7b50
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-000000008fec0000
0000000000 - 008fe00000 page 2M
008fe00000 - 008fec0000 page 4k
kernel direct mapping tables up to 8fec0000 @ 8febb000-8fec0000
init_memory_mapping: 0000000100000000-0000000160000000
0100000000 - 0160000000 page 2M
kernel direct mapping tables up to 160000000 @ 15fff9000-160000000
RAMDISK: 37e56000 - 37ff0000
ACPI: RSDP 00000000000f7b20 00024 (v02 PTLTD )
ACPI: XSDT 000000008fec37f6 000A4 (v01 DELL QA09 06040000 LTP 00000000)
ACPI: FACP 000000008fecec04 000F4 (v03 NVIDIA MCP79 06040000 PTL_ 000F4240)
ACPI: DSDT 000000008fec5388 09808 (v01 NVIDIA MCP79 06040000 MSFT 03000001)
ACPI: FACS 000000008fee4fc0 00040
ACPI: MCFG 000000008fececf8 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
ACPI: HPET 000000008feced34 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
ACPI: APIC 000000008feced6c 00072 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: BOOT 000000008fecedde 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SLIC 000000008fecee06 00176 (v01 DELL QA09 06040000 LTP 00000000)
ACPI: OSFR 000000008fecef7c 00084 (v01 DELL DELL 06040000 ASL 00000061)
ACPI: SSDT 000000008fec5129 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228)
ACPI: SSDT 000000008fec5083 000A6 (v01 PmRef Cpu7Tst 00003000 INTL 20050228)
ACPI: SSDT 000000008fec4fdd 000A6 (v01 PmRef Cpu6Tst 00003000 INTL 20050228)
ACPI: SSDT 000000008fec4f37 000A6 (v01 PmRef Cpu5Tst 00003000 INTL 20050228)
ACPI: SSDT 000000008fec4e91 000A6 (v01 PmRef Cpu4Tst 00003000 INTL 20050228)
ACPI: SSDT 000000008fec4deb 000A6 (v01 PmRef Cpu3Tst 00003000 INTL 20050228)
ACPI: SSDT 000000008fec4d45 000A6 (v01 PmRef Cpu2Tst 00003000 INTL 20050228)
ACPI: SSDT 000000008fec4c9f 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228)
ACPI: SSDT 000000008fec389a 01405 (v01 PmRef CpuPm 00003000 INTL 20050228)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000160000000
Initmem setup node 0 0000000000000000-0000000160000000
NODE_DATA [000000015fffb000 - 000000015fffffff]
[ffffea0000000000-ffffea0004dfffff] PMD -> [ffff88015c200000-ffff88015f7fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00160000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009d
0: 0x00000100 -> 0x0008fec0
0: 0x00100000 -> 0x00160000
On node 0 totalpages: 982605
DMA zone: 56 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3919 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 571128 pages, LIFO batch:31
Normal zone: 5376 pages used for memmap
Normal zone: 387840 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10dea301 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
PM: Registered nosave memory: 00000000000d4000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
PM: Registered nosave memory: 000000008fec0000 - 000000008fecf000
PM: Registered nosave memory: 000000008fecf000 - 000000008fee5000
PM: Registered nosave memory: 000000008fee5000 - 00000000a0000000
PM: Registered nosave memory: 00000000a0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000fff80000
PM: Registered nosave memory: 00000000fff80000 - 0000000100000000
Allocating PCI resources starting at a0000000 (gap: a0000000:40000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88008fc00000 s82176 r8192 d24320 u1048576
pcpu-alloc: s82176 r8192 d24320 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 962887
Policy zone: Normal
Kernel command line: root=/dev/sda3 ro resume=/dev/sda3 5
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3798920k/5767168k available (3795k kernel code, 1836748k absent, 131500k reserved, 2307k data, 556k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Preemptable hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:2304
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 39321600 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2400.376 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4802.78 BogoMIPS (lpj=8001253)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring handled by SMI
using mwait in idle threads.
ACPI: Core revision 20110112
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 06
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 Ok.
CPU1: Thermal monitoring handled by SMI
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (9604.67 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-07] at [mem 0xe0000000-0xe07fffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe07fffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: SSDT 000000008fee1086 0021F (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0021F (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
ACPI: SSDT 000000008fee1648 0067D (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0067D (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
ACPI: SSDT 000000008fee0ed6 001B0 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 001B0 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
ACPI: SSDT 000000008fee15c3 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x47, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff]
pci_root PNP0A08:00: host bridge window [mem 0xa0000000-0xfebfffff]
pci 0000:00:00.0: [10de:0a82] type 0 class 0x000600
pci 0000:00:00.1: [10de:0a88] type 0 class 0x000500
pci 0000:00:03.0: [10de:0aae] type 0 class 0x000601
pci 0000:00:03.0: reg 10: [io 0x1c00-0x1cff]
pci 0000:00:03.1: [10de:0aa4] type 0 class 0x000500
pci 0000:00:03.2: [10de:0aa2] type 0 class 0x000c05
pci 0000:00:03.2: reg 10: [io 0x3080-0x30bf]
pci 0000:00:03.2: reg 20: [io 0x3040-0x307f]
pci 0000:00:03.2: reg 24: [io 0x2000-0x203f]
pci 0000:00:03.2: PME# supported from D3hot D3cold
pci 0000:00:03.2: PME# disabled
pci 0000:00:03.3: [10de:0a89] type 0 class 0x000500
pci 0000:00:03.5: [10de:0aa3] type 0 class 0x000b40
pci 0000:00:03.5: reg 10: [mem 0xf0600000-0xf067ffff]
pci 0000:00:04.0: [10de:0aa5] type 0 class 0x000c03
pci 0000:00:04.0: reg 10: [mem 0xf0886000-0xf0886fff]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:04.1: [10de:0aa6] type 0 class 0x000c03
pci 0000:00:04.1: reg 10: [mem 0xf0889000-0xf08890ff]
pci 0000:00:04.1: supports D1 D2
pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.1: PME# disabled
pci 0000:00:06.0: [10de:0aa7] type 0 class 0x000c03
pci 0000:00:06.0: reg 10: [mem 0xf0887000-0xf0887fff]
pci 0000:00:06.0: supports D1 D2
pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:06.1: [10de:0aa9] type 0 class 0x000c03
pci 0000:00:06.1: reg 10: [mem 0xf0889400-0xf08894ff]
pci 0000:00:06.1: supports D1 D2
pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:06.1: PME# disabled
pci 0000:00:08.0: [10de:0ac0] type 0 class 0x000403
pci 0000:00:08.0: reg 10: [mem 0xf0880000-0xf0883fff]
pci 0000:00:08.0: PME# supported from D3hot D3cold
pci 0000:00:08.0: PME# disabled
pci 0000:00:09.0: [10de:0aab] type 1 class 0x000604
pci 0000:00:0a.0: [10de:0ab0] type 0 class 0x000200
pci 0000:00:0a.0: reg 10: [mem 0xf0888000-0xf0888fff]
pci 0000:00:0a.0: reg 14: [io 0x30d0-0x30d7]
pci 0000:00:0a.0: reg 18: [mem 0xf0889c00-0xf0889cff]
pci 0000:00:0a.0: reg 1c: [mem 0xf0889800-0xf088980f]
pci 0000:00:0a.0: supports D1 D2
pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:0b.0: [10de:0ab9] type 0 class 0x000106
pci 0000:00:0b.0: reg 10: [io 0x30e8-0x30ef]
pci 0000:00:0b.0: reg 14: [io 0x30dc-0x30df]
pci 0000:00:0b.0: reg 18: [io 0x30e0-0x30e7]
pci 0000:00:0b.0: reg 1c: [io 0x30d8-0x30db]
pci 0000:00:0b.0: reg 20: [io 0x30c0-0x30cf]
pci 0000:00:0b.0: reg 24: [mem 0xf0884000-0xf0885fff]
pci 0000:00:0c.0: [10de:0ac4] type 1 class 0x000604
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:00:10.0: [10de:0aa0] type 1 class 0x000604
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: PME# disabled
pci 0000:00:15.0: [10de:0ac6] type 1 class 0x000604
pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.0: PME# disabled
pci 0000:00:16.0: [10de:0ac7] type 1 class 0x000604
pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:17.0: [10de:0ac7] type 1 class 0x000604
pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:17.0: PME# disabled
pci 0000:00:18.0: [10de:0ac7] type 1 class 0x000604
pci 0000:00:18.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:18.0: PME# disabled
pci 0000:01:07.0: [1180:0832] type 0 class 0x000c00
pci 0000:01:07.0: proprietary Ricoh MMC controller disabled (via firewire function)
pci 0000:01:07.0: MMC cards are now supported by standard SDHCI controller
pci 0000:01:07.0: reg 10: [mem 0xf0500000-0xf05007ff]
pci 0000:01:07.0: supports D1 D2
pci 0000:01:07.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:07.0: PME# disabled
pci 0000:01:07.1: [1180:0822] type 0 class 0x000805
pci 0000:01:07.1: reg 10: [mem 0xf0500800-0xf05008ff]
pci 0000:01:07.1: supports D1 D2
pci 0000:01:07.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:07.1: PME# disabled
pci 0000:01:07.2: [1180:0592] type 0 class 0x000880
pci 0000:01:07.2: reg 10: [mem 0xf0501000-0xf05010ff]
pci 0000:01:07.2: supports D1 D2
pci 0000:01:07.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:07.2: PME# disabled
pci 0000:01:07.3: [1180:0852] type 0 class 0x000880
pci 0000:01:07.3: reg 10: [mem 0xf0501400-0xf05014ff]
pci 0000:01:07.3: supports D1 D2
pci 0000:01:07.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:07.3: PME# disabled
pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:09.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:09.0: bridge window [mem 0xf0500000-0xf05fffff]
pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:09.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:09.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000cc000-0x000cffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0xa0000000-0xfebfffff] (subtractive decode)
pci 0000:02:00.0: [10de:06e8] type 0 class 0x000300
pci 0000:02:00.0: reg 10: [mem 0xae000000-0xaeffffff]
pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 1c: [mem 0xac000000-0xadffffff 64bit]
pci 0000:02:00.0: reg 24: [io 0x4000-0x407f]
pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:0c.0: PCI bridge to [bus 02-02]
pci 0000:00:0c.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:0c.0: bridge window [mem 0xac000000-0xaeffffff]
pci 0000:00:0c.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:03:00.0: [10de:0866] type 0 class 0x000300
pci 0000:03:00.0: reg 10: [mem 0xaa000000-0xaaffffff]
pci 0000:03:00.0: reg 14: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:03:00.0: reg 1c: [mem 0xcc000000-0xcdffffff 64bit pref]
pci 0000:03:00.0: reg 24: [io 0x5000-0x507f]
pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:10.0: PCI bridge to [bus 03-03]
pci 0000:00:10.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:10.0: bridge window [mem 0xaa000000-0xaaffffff]
pci 0000:00:10.0: bridge window [mem 0xb0000000-0xcdffffff 64bit pref]
pci 0000:00:15.0: PCI bridge to [bus 04-05]
pci 0000:00:15.0: bridge window [io 0x6000-0x6fff]
pci 0000:00:15.0: bridge window [mem 0xf0200000-0xf03fffff]
pci 0000:00:15.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:06:00.0: [168c:002a] type 0 class 0x000280
pci 0000:06:00.0: reg 10: [mem 0xf0400000-0xf040ffff 64bit]
pci 0000:06:00.0: supports D1
pci 0000:06:00.0: PME# supported from D0 D1 D3hot
pci 0000:06:00.0: PME# disabled
pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:16.0: PCI bridge to [bus 06-06]
pci 0000:00:16.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:16.0: bridge window [mem 0xf0400000-0xf04fffff]
pci 0000:00:16.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:17.0: PCI bridge to [bus 07-07]
pci 0000:00:17.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:17.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:17.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:18.0: PCI bridge to [bus 08-08]
pci 0000:00:18.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:18.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:18.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [Z00Q] (IRQs 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [Z00R] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00S] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00T] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00U] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00V] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00W] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00X] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00Y] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00Z] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z010] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z011] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z012] (IRQs 18 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [Z013] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z014] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z015] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z016] (IRQs 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [Z017] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z018] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z019] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z01A] (IRQs 18 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [Z01B] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z01C] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z01D] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z01E] (IRQs 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [Z01F] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z01G] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z01H] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 18 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [LUS0] (IRQs 18 19 20 21 22 23) *7
ACPI: PCI Interrupt Link [LUS2] (IRQs 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [LMAC] (IRQs 18 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [LAZA] (IRQs 17) *11
ACPI: PCI Interrupt Link [LGPU] (IRQs 18 19 20 21 22 23) *5
ACPI: PCI Interrupt Link [LPID] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSI0] (IRQs 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [LSI1] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00O] (IRQs 18 19 20 21 22 23) *5
ACPI: PCI Interrupt Link [Z00P] (IRQs 18 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [LPMU] (IRQs 18 19 20 21 22 23) *10
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009dc00 - 000000000009ffff
reserve RAM buffer: 000000008fec0000 - 000000008fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
hpet0: 4 comparators, 64-bit 25.000000 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [mem 0xffc00000-0xffffffff]
pnp 00:00: [mem 0xfec00000-0xfec00fff]
pnp 00:00: [mem 0xfee00000-0xfeefffff]
pnp 00:00: [mem 0xfed00000-0xfed00fff]
system 00:00: [mem 0xffc00000-0xffffffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:00: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [bus 00-ff]
pnp 00:01: [io 0x0cf8-0x0cff]
pnp 00:01: [io 0x0000-0x0cf7 window]
pnp 00:01: [io 0x0d00-0xffff window]
pnp 00:01: [mem 0x000a0000-0x000bffff window]
pnp 00:01: [mem 0x000c0000-0x000c3fff window]
pnp 00:01: [mem 0x000c4000-0x000c7fff window]
pnp 00:01: [mem 0x000c8000-0x000cbfff window]
pnp 00:01: [mem 0x000cc000-0x000cffff window]
pnp 00:01: [mem 0x000d0000-0x000d3fff window]
pnp 00:01: [mem 0x000d4000-0x000d7fff window]
pnp 00:01: [mem 0x000d8000-0x000dbfff window]
pnp 00:01: [mem 0x000dc000-0x000dffff window]
pnp 00:01: [mem 0x000e0000-0x000e3fff window]
pnp 00:01: [mem 0x000e4000-0x000e7fff window]
pnp 00:01: [mem 0x000e8000-0x000ebfff window]
pnp 00:01: [mem 0x000ec000-0x000effff window]
pnp 00:01: [mem 0x000f0000-0x000fffff window]
pnp 00:01: [mem 0xa0000000-0xfebfffff window]
pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:02: [irq 0 disabled]
pnp 00:02: [irq 8]
pnp 00:02: [mem 0xfed00000-0xfed003ff]
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:03: [mem 0xf0600000-0xf0607fff]
pnp 00:03: disabling [mem 0xf0600000-0xf0607fff] because it overlaps 0000:00:03.5 BAR 0 [mem 0xf0600000-0xf067ffff]
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [io 0x1000-0x107f]
pnp 00:04: [io 0x1080-0x10ff]
pnp 00:04: [io 0x1400-0x147f]
pnp 00:04: [io 0x1480-0x14ff]
pnp 00:04: [io 0x1800-0x187f]
pnp 00:04: [io 0x1880-0x18ff]
system 00:04: [io 0x1000-0x107f] has been reserved
system 00:04: [io 0x1080-0x10ff] has been reserved
system 00:04: [io 0x1400-0x147f] has been reserved
system 00:04: [io 0x1480-0x14ff] has been reserved
system 00:04: [io 0x1800-0x187f] has been reserved
system 00:04: [io 0x1880-0x18ff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [io 0x0060]
pnp 00:05: [io 0x0064]
pnp 00:05: [irq 1]
pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:06: [irq 12]
pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #1
pnp 00:07: [io 0x0010-0x001f]
pnp 00:07: [io 0x0022-0x003f]
pnp 00:07: [io 0x0044-0x005f]
pnp 00:07: [io 0x0072-0x0073]
pnp 00:07: [io 0x0074-0x007f]
pnp 00:07: [io 0x0091-0x0093]
pnp 00:07: [io 0x0097-0x009f]
pnp 00:07: [io 0x00a2-0x00bf]
pnp 00:07: [io 0x00e0-0x00ef]
pnp 00:07: [io 0x04d0-0x04d1]
pnp 00:07: [io 0x0080]
pnp 00:07: [io 0x0910-0x0911]
pnp 00:07: [io 0x0295-0x0296]
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x0910-0x0911] has been reserved
system 00:07: [io 0x0295-0x0296] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io 0x0000-0x0008]
pnp 00:08: [io 0x000a-0x000f]
pnp 00:08: [io 0x0081-0x0083]
pnp 00:08: [io 0x0087]
pnp 00:08: [io 0x0089-0x008b]
pnp 00:08: [io 0x008f]
pnp 00:08: [io 0x00c0-0x00d1]
pnp 00:08: [io 0x00d4-0x00df]
pnp 00:08: [dma 4]
pnp 00:08: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:09: [io 0x0061]
pnp 00:09: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:0a: [io 0x0070-0x0071]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:0b: [io 0x00f0-0x00f1]
pnp 00:0b: [irq 13]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:0c: [io 0x0300-0x0307]
pnp 00:0c: [irq 10]
pnp 00:0c: Plug and Play ACPI device, IDs ITE8708 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:09.0: PCI bridge to [bus 01-01]
pci 0000:00:09.0: bridge window [io disabled]
pci 0000:00:09.0: bridge window [mem 0xf0500000-0xf05fffff]
pci 0000:00:09.0: bridge window [mem pref disabled]
pci 0000:02:00.0: BAR 6: can't assign mem pref (size 0x20000)
pci 0000:00:0c.0: PCI bridge to [bus 02-02]
pci 0000:00:0c.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:0c.0: bridge window [mem 0xac000000-0xaeffffff]
pci 0000:00:0c.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref]
pci 0000:00:10.0: PCI bridge to [bus 03-03]
pci 0000:00:10.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:10.0: bridge window [mem 0xaa000000-0xaaffffff]
pci 0000:00:10.0: bridge window [mem 0xb0000000-0xcdffffff 64bit pref]
pci 0000:00:15.0: PCI bridge to [bus 04-05]
pci 0000:00:15.0: bridge window [io 0x6000-0x6fff]
pci 0000:00:15.0: bridge window [mem 0xf0200000-0xf03fffff]
pci 0000:00:15.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:00:16.0: PCI bridge to [bus 06-06]
pci 0000:00:16.0: bridge window [io disabled]
pci 0000:00:16.0: bridge window [mem 0xf0400000-0xf04fffff]
pci 0000:00:16.0: bridge window [mem pref disabled]
pci 0000:00:17.0: PCI bridge to [bus 07-07]
pci 0000:00:17.0: bridge window [io disabled]
pci 0000:00:17.0: bridge window [mem disabled]
pci 0000:00:17.0: bridge window [mem pref disabled]
pci 0000:00:18.0: PCI bridge to [bus 08-08]
pci 0000:00:18.0: bridge window [io disabled]
pci 0000:00:18.0: bridge window [mem disabled]
pci 0000:00:18.0: bridge window [mem pref disabled]
pci 0000:00:09.0: setting latency timer to 64
ACPI: PCI Interrupt Link [Z00Q] enabled at IRQ 23
pci 0000:00:0c.0: PCI INT A -> Link[Z00Q] -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:0c.0: setting latency timer to 64
pci 0000:00:10.0: setting latency timer to 64
ACPI: PCI Interrupt Link [Z012] enabled at IRQ 22
pci 0000:00:15.0: PCI INT A -> Link[Z012] -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:15.0: setting latency timer to 64
ACPI: PCI Interrupt Link [Z016] enabled at IRQ 21
pci 0000:00:16.0: PCI INT A -> Link[Z016] -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:16.0: setting latency timer to 64
ACPI: PCI Interrupt Link [Z01A] enabled at IRQ 20
pci 0000:00:17.0: PCI INT A -> Link[Z01A] -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:17.0: setting latency timer to 64
ACPI: PCI Interrupt Link [Z01E] enabled at IRQ 19
pci 0000:00:18.0: PCI INT A -> Link[Z01E] -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:18.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
pci_bus 0000:00: resource 20 [mem 0xa0000000-0xfebfffff]
pci_bus 0000:01: resource 1 [mem 0xf0500000-0xf05fffff]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff]
pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff]
pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff]
pci_bus 0000:01: resource 10 [mem 0x000cc000-0x000cffff]
pci_bus 0000:01: resource 11 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:01: resource 12 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:01: resource 13 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:01: resource 14 [mem 0x000dc000-0x000dffff]
pci_bus 0000:01: resource 15 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:01: resource 16 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:01: resource 17 [mem 0x000e8000-0x000ebfff]
pci_bus 0000:01: resource 18 [mem 0x000ec000-0x000effff]
pci_bus 0000:01: resource 19 [mem 0x000f0000-0x000fffff]
pci_bus 0000:01: resource 20 [mem 0xa0000000-0xfebfffff]
pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:02: resource 1 [mem 0xac000000-0xaeffffff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:03: resource 1 [mem 0xaa000000-0xaaffffff]
pci_bus 0000:03: resource 2 [mem 0xb0000000-0xcdffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:04: resource 1 [mem 0xf0200000-0xf03fffff]
pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
pci_bus 0000:06: resource 1 [mem 0xf0400000-0xf04fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:03:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1640k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff88008bc00000 - ffff88008fc00000
software IO TLB at phys 0x8bc00000 - 0x8fc00000
Simple Boot Flag at 0x36 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1302716230.603:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7422
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
intel_idle: MWAIT substates: 0x3122220
intel_idle: does not run on family 6 model 23
ERST: Table is not found!
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Linux agpgart interface v0.103
i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:0a: RTC can wake from S4
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Checking hibernation image partition /dev/sda3
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:0a: setting system clock to 2011-04-13 17:37:11 UTC (1302716231)
Initalizing network drop monitor service
Freeing unused kernel memory: 556k freed
udev[38]: starting version 166
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:0b.0: version 3.0
ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 18
ahci 0000:00:0b.0: PCI INT A -> Link[LSI0] -> GSI 18 (level, low) -> IRQ 18
ahci 0000:00:0b.0: irq 40 for MSI/MSI-X
ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP
ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:0b.0: flags: 64bit ncq sntf led pio slum part sxs
ahci 0000:00:0b.0: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884100 irq 40
ata2: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884180 irq 40
ata3: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884200 irq 40
ata4: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884280 irq 40
ata5: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884300 irq 40
ata6: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884380 irq 40
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata2.00: ATAPI: HL-DT-ST DVD+/-RW GS20N, A106, max UDMA/133
ata2.00: configured for UDMA/133
ata1.00: ATA-8: ST9500420ASG, 0002SDM1, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST9500420ASG 0002 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GS20N A106 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
Refined TSC clocksource calibration: 2399.988 MHz.
Switching to clocksource tsc
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
udev[632]: starting version 166
cfg80211: Calling CRDA to update world regulatory domain
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
forcedeth 0000:00:0a.0: setting latency timer to 64
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
ath9k 0000:06:00.0: PCI INT A -> Link[Z016] -> GSI 21 (level, low) -> IRQ 21
ath9k 0000:06:00.0: setting latency timer to 64
input: PC Speaker as /devices/platform/pcspkr/input/input1
forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x50ef @ 0, addr 00:22:19:f7:35:cf
forcedeth 0000:00:0a.0: highdma csum pwrctl gbit lnktim msi desc-v3
i2c i2c-0: nForce2 SMBus adapter at 0x3040
i2c i2c-1: nForce2 SMBus adapter at 0x2000
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
Registered led device: ath9k-phy0::radio
Registered led device: ath9k-phy0::assoc
Registered led device: ath9k-phy0::tx
Registered led device: ath9k-phy0::rx
ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffc900018c0000, irq=21
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:04.1: setting latency timer to 64
ehci_hcd 0000:00:04.1: EHCI Host Controller
ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2a/PNP0C0E:00/input/input3
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
ehci_hcd 0000:00:04.1: debug port 1
ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
ehci_hcd 0000:00:04.1: irq 22, io mem 0xf0889000
ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ACPI: PCI Interrupt Link [Z00P] enabled at IRQ 21
ehci_hcd 0000:00:06.1: PCI INT B -> Link[Z00P] -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:06.1: setting latency timer to 64
ehci_hcd 0000:00:06.1: EHCI Host Controller
ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:06.1: debug port 1
ehci_hcd 0000:00:06.1: cache line size of 64 is not supported
ehci_hcd 0000:00:06.1: irq 21, io mem 0xf0889400
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
HDA Intel 0000:00:08.0: power state changed by ACPI to D0
HDA Intel 0000:00:08.0: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 17
HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 17 (level, low) -> IRQ 17
hda_intel: Disable MSI for Nvidia chipset
HDA Intel 0000:00:08.0: setting latency timer to 64
[Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
wmi: Mapper loaded
ACPI: acpi_idle registered with cpuidle
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
Switching to clocksource hpet
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: EC: GPE storm detected, transactions will use polling mode
Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
usb 1-1: new high speed USB device using ehci_hcd and address 2
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:01:07.1: SDHCI controller found [1180:0822] (rev 22)
ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11
sdhci-pci 0000:01:07.1: PCI INT B -> Link[LNK2] -> GSI 11 (level, low) -> IRQ 11
sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it.
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:01:07.1] using DMA
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
firewire_ohci 0000:01:07.0: PCI INT A -> Link[LNK1] -> GSI 11 (level, low) -> IRQ 11
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (60 C)
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
firewire_ohci: Added fw-ohci device 0000:01:07.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
ACPI: AC Adapter [ADP0] (on-line)
usb 1-2: new high speed USB device using ehci_hcd and address 3
input: Dell WMI hotkeys as /devices/virtual/input/input7
acpi device:0c: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0b/LNXVIDEO:00/input/input8
ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
[Firmware Bug]: ACPI(Z01I) defines _DOD but not _DOS
acpi device:14: registered as cooling_device3
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input9
ACPI: Video Device [Z01I] (multi-head: yes rom: yes post: no)
usb 2-1: new high speed USB device using ehci_hcd and address 2
firewire_core: created device fw0: GUID 424fc00010f09890, S400
firewire_core: phy config: card 0, new root=ffc1, gap_count=5
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
usb 2-3: new high speed USB device using ehci_hcd and address 3
usb 1-1.1: new low speed USB device using ehci_hcd and address 5
usb 1-1.2: new full speed USB device using ehci_hcd and address 6
usb 1-1.4: new high speed USB device using ehci_hcd and address 7
cdc_wdm 2-1:1.5: cdc-wdm-176: USB WDM device
cdc_wdm 2-1:1.6: cdc-wdm-175: USB WDM device
usbcore: registered new interface driver cdc_wdm
Initializing USB Mass Storage driver...
cdc_acm 2-1:1.1: ttyACM0: USB ACM device
cdc_acm 2-1:1.3: ttyACM1: USB ACM device
scsi6 : usb-storage 1-2:1.0
cdc_acm 2-1:1.9: ttyACM2: USB ACM device
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver cdc_acm
cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
scsi7 : usb-storage 1-1.4:1.0
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Integrated Webcam (05ca:18a3)
cdc_ether 2-1:1.7: wwan0: register 'cdc_ether' at usb-0000:00:06.1-1, Mobile Broadband Network Device, 02:80:37:ec:02:00
usbcore: registered new interface driver cdc_ether
input: Integrated Webcam as /devices/pci0000:00/0000:00:06.1/usb2/2-3/2-3:1.0/input/input10
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v1.0.0)
usbcore: registered new interface driver uas
usbcore: registered new interface driver zaurus
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1.2/1-1.2:1.0/input/input11
generic-usb 0003:046D:C52B.0003: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:04.1-1.2/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1.2/1-1.2:1.1/input/input12
generic-usb 0003:046D:C52B.0004: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:04.1-1.2/input1
generic-usb 0003:046D:C52B.0005: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:04.1-1.2/input2
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1.1/1-1.1:1.0/input/input13
logitech 0003:046D:C517.0001: input,hidraw3: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:04.1-1.1/input0
logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1.1/1-1.1:1.1/input/input14
logitech 0003:046D:C517.0002: input,hiddev0,hidraw4: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:04.1-1.1/input1
scsi 6:0:0:0: Direct-Access Seagate FreeAgent Go 102F PQ: 0 ANSI: 4
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 1c 00 00 00
sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 7:0:0:0: Direct-Access Seagate FreeAgent Go 0142 PQ: 0 ANSI: 4
sd 7:0:0:0: Attached scsi generic sg3 type 0
sd 7:0:0:0: [sdc] 976773166 512-byte logical blocks: (500 GB/465 GiB)
sd 7:0:0:0: [sdc] Write Protect is off
sd 7:0:0:0: [sdc] Mode Sense: 1c 00 00 00
sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: unknown partition table
sd 7:0:0:0: [sdc] Attached SCSI disk
sdb: unknown partition table
sd 6:0:0:0: [sdb] Attached SCSI disk
hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x100f0000
hda-intel: Codec #1 probe error; disabling it...
firewire_core: created device fw1: GUID 0001f2000001eda4, S400, 1 config ROM retries
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:08.0/input/input15
input: HDA NVidia Mic at Ext Left Jack as /devices/pci0000:00/0000:00:08.0/sound/card0/input16
input: HDA NVidia HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:08.0/sound/card0/input17
input: HDA NVidia HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:08.0/sound/card0/input18
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20
ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUS0] -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:04.0: setting latency timer to 64
ohci_hcd 0000:00:04.0: OHCI Host Controller
ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:04.0: irq 20, io mem 0xf0886000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ACPI: PCI Interrupt Link [Z00O] enabled at IRQ 19
ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z00O] -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:06.0: setting latency timer to 64
ohci_hcd 0000:00:06.0: OHCI Host Controller
ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:06.0: irq 19, io mem 0xf0887000
fuse init (API version 7.16)
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [LPMU] enabled at IRQ 18
nvidia 0000:00:03.5: PCI INT B -> Link[LPMU] -> GSI 18 (level, low) -> IRQ 18
nvidia 0000:02:00.0: enabling device (0004 -> 0007)
nvidia 0000:02:00.0: PCI INT A -> Link[Z00Q] -> GSI 23 (level, low) -> IRQ 23
nvidia 0000:02:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none
ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 23
nvidia 0000:03:00.0: PCI INT A -> Link[LGPU] -> GSI 23 (level, low) -> IRQ 23
nvidia 0000:03:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 270.41.03 Sat Apr 9 00:06:19 PDT 2011
loop: module loaded
vboxdrv: Found 2 processor cores.
VBoxDrv: dbg - g_abExecMemory=ffffffffa0f04d20
vboxdrv: fAsync=0 offMin=0x1b9 offMax=0x1368
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.0.4_OSE (interface 0x00160000).
[drm] Initialized drm 1.1.0 20060810
usbcore: registered new interface driver wacom
wacom: v1.52:USB Wacom tablet driver
usb 3-4: new full speed USB device using ohci_hcd and address 2
hub 3-4:1.0: USB hub found
hub 3-4:1.0: 3 ports detected
EXT4-fs (sda3): re-mounted. Opts: (null)
EXT4-fs (sda3): re-mounted. Opts: (null)
usb 3-4.1: new full speed USB device using ohci_hcd and address 3
input: HID 413c:8157 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.1/3-4.1:1.0/input/input19
generic-usb 0003:413C:8157.0006: input,hidraw5: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:04.0-4.1/input0
usb 3-4.2: new full speed USB device using ohci_hcd and address 4
input: HID 413c:8158 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.2/3-4.2:1.0/input/input20
generic-usb 0003:413C:8158.0007: input,hidraw6: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:04.0-4.2/input0
Adding 6243324k swap on /dev/sda4. Priority:-1 extents:1 across:6243324k
usb 3-4.3: new full speed USB device using ohci_hcd and address 5
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
CE: hpet increased min_delta_ns to 11520 nsec
CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load
EXT4-fs (sda3): re-mounted. Opts: barrier=1,data=ordered,commit=360
forcedeth 0000:00:0a.0: eth0: no link during initialization
ohci_hcd 0000:00:06.0: PCI INT A disabled
ohci_hcd 0000:00:06.0: PME# enabled
ohci_hcd 0000:00:06.0: BAR 0: set to [mem 0xf0887000-0xf0887fff] (PCI address [0xf0887000-0xf0887fff])
ohci_hcd 0000:00:06.0: restoring config space at offset 0xf (was 0x1030100, writing 0x1030105)
ohci_hcd 0000:00:06.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00003)
ohci_hcd 0000:00:06.0: PME# disabled
ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z00O] -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:06.0: setting latency timer to 64
NET: Registered protocol family 10
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
Bluetooth: L2CAP ver 2.15
Bluetooth: L2CAP socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
i2c /dev entries driver
wlan0: authenticate with 1c:af:f7:89:a6:76 (try 1)
wlan0: authenticated
wlan0: associate with 1c:af:f7:89:a6:76 (try 1)
wlan0: RX AssocResp from 1c:af:f7:89:a6:76 (capab=0xc31 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: GB
cfg80211: Regulatory domain changed to country: GB
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Intel AES-NI instructions are not detected.
padlock_aes: VIA PadLock not detected.
wlan0: no IPv6 routers present
EXT4-fs (sda3): re-mounted. Opts: commit=0
warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: [email protected]
ifconfig wlan0:
wlan0 Link encap:Ethernet HWaddr 00:22:5F:62:3D:05
inet addr:192.168.0.6 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::222:5fff:fe62:3d05/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:87499 errors:0 dropped:0 overruns:0 frame:0
TX packets:137443 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:23679050 (22.5 Mb) TX bytes:160748042 (153.3 Mb)
I wonder why this is happening
Last edited by king.flasher.dave (2011-04-13 16:15:59) -
I'm experiencing a very very slow printing of any complex document (1-2 mega spooling file).
Hello ,
Thanks for posting in the HP Forums!
I'd like to help you with the slow printing that you are experiencing when printing more complex files to your HP LaserJet M276nw Printer wirelessly from your Mac 10.9 computer. Generally, the larger/more complex the file, the longer it will take to process, transmit over your network, and print. However, if it is printing extremely slow, I have a few suggestions that may correct this for you. First, you'll want to make sure you have the full feature software installed for this model. If you haven't installed the software previously you can download it here - HP LaserJet Pro 200 Color M276 Full Feature Software and Drivers. Once the software is installed, follow these steps to add your printer to you Mac (ensuring that you're using the proper driver): Click the Apple icon on your Menu Bar.Select System Preferences.Select Printers and Scanners.Select your printer and then press the (-) button at the bottom of the list to remove it.Select the (+) and click Add Printers and Scanners. (NOTE: Do not select the printer from the list of Nearby printers as this will often automatically use the AirPrint driver)Select your printer (the one that shows Bonjour Multifunction under "Kind").At the bottom of the window under Use: does it say AirPrint? If so, click the drop down and you should see a specific driver for the printer. Click Add.Try printing your document again, and let me know the result.Please respond to let me know if we have resolved the issue! -
Officejet 6700 very slow to print does not scan to Imac
I just purchased a new officejet 6700 from Costco it takes at least 10 min to print if at all and does not scan to Imac the current osx is snow leopard 10.6.8 using an airport time machine as a my wireless router / backup I have charter internet with ARRIS modem model # TM502G its also very slow to run any functions in the hp utility I did notice that the home network ip and printer ip are different don't know if that is an issue or not any help would be appreciated thanx.
Hello kennethburland,
Welcome to the HP Forums! I understand your concerns with your Officejet 6700 Premium.
What program are you printing from? Do you notice this issue occur from using multiple program(s)?
Please follow this entire HP document on Slow Printing. Make sure you choose your correct operating system.
You did indicate that your printer's IP address and your home network are different. The first three numbers of the IP address should be the same, but the last number(s) should be different. Please reference this HP document on Wireless Basic.
Are you receiving any error message indicating why you are unable to scan a document to your computer?
If you are receiving a "Connection Error", then please follow this HP document here. If the scanning software isn't responding, then follow this HP document here.
Please inform me your troubleshooting steps.
I worked on behalf of HP. -
Very slow PDF printing on Canon MG7550 printer
Hi,
When I print large PDF files (25 pages) using network or cable it prints very slow. It lasts forever before the print job has been sent to the printer. When the print job is finally received there can be 1-2 minutes between each page. It just stops printing, then starts and so on.
Can someone help me with this?
System and software:
Macbook Pro, OS X Yosemite, version 10.10.1
Adobe Acrobat Pro XI, version 11.0.10I am only guessing here because I don't know the specifics of the printer that you are using. Since all of the pages are scanned that means you basically printing images. This take much more memory than say a text document would take to print. You may be getting a spooled effect as your printer tries to manage the memory it takes to print the document. Your settings are probably set to print directly to the printer. You could try spooling to the hard drive and it might print more smoothly but still take a while to print.
-
Very slow network transfer (AFP, thunderbolt, nas, gigabit, lan, lion)
Hi,
When copying large files (100GB) from my macbook air to my Qnap NAS the transfer is very slow (100kB/s). It becomes immediately much faster (10MB/s) when I lock my session.
The MBA is connected via the gigabit port of the thundrbold display and a gigabit switch to the gigabit port of the NAS.
There is negligible other network activity shown when monitoring NAS or MBA bandwith usage.
So what can limit bandwith of a mac while in unlocked session?
Is the a bug in thunderbolt display dramtically deminishing bandwith when used? Bandwitdth is already high when locked and display shows login screen. It does not need to fall asleep.
ThxI want to thank you for your help but I think I have to give up. I've been trying for days to get the MBP just to recognise the NFS share. I've tried adding a server in Finder with no luck. I tried Directory Utility with full R/W access setup on NAS, then tried accessing root NAS folder, then the specific share folders, then with specific user enabled on the specific share folders but whatever I try I get nothing. I've changed my local username and password and UID on the Mac to exactly the same one I use for my NAS but it still won't find it and none of the command line options that people suggest do anything at all. I've tried SMB and AFP but they're both sluggish and nowhere near the performance of XP on the same hardware. For an OS that supposedly 'Just Works' I've had a very complicated, tedious and fruitless experience (pun intended). Maybe it's just me because others seem to report no problems accessing their NFS shares or transferring at high speeds with AFP or even SMB but I've had no luck whatsoever. Very frustrating indeed.
Again, sincere thanks for your time and I'll tag the post as answered because for all intents and purposes you answered my question very well. Unfortunately, this Mac just doesn't like me and I don't think I'll be spending money on one anytime soon. -
I am getting very slow speeds while transferring from my computer to a server. I only have two accounts on this computer - my account and then an administrator account I use as a backup and clean user. With the admin account I am getting 25 MB/sec (limit of the firewire drive I tested with), but only ~10 MB/sec while logged in to my account. Would seem very odd but is there a preference somewhere that would effect the speed of only sending data? Pulling from the server I get ~65 MB/sec. Output of ifconfig shows that I am connected in 1000baseT full-duplex. I have tried both ethernet ports on the Mac, two ports on the switch, and two cables from the etherent port on the Mac to the switch, so the problem doesn't seems to be on the physical layer, but rather only when logged in to my account. Any ideas are appreciated as this is killing my performance during large file saves. Thanks!
Tried again on the admin side. Seems that has slowed down now too. Getting about the same speeds on that account. Is it possible Vmware Fusion is causing any problems? Looks like it created a couple interfaces for network bridging to function, but I can't see how this would effect my network speeds on the host OS. Here is an output of ifconfig just in case it helps
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0 mtu 1280
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078
lladdr 00:21:e9:ff:fe:c8:62:4a
media: autoselect <full-duplex> status: inactive
supported media: autoselect <full-duplex>
en0: flags=8822<BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 1500
ether 00:1f:5b:39:ba:a8
media: autoselect (<unknown type>) status: inactive
supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 10baseT/UTP <full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX <full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT <full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::21f:5bff:fe39:baa9%en1 prefixlen 64 scopeid 0x6
inet 192.168.2.12 netmask 0xffffff00 broadcast 192.168.2.255
ether 00:1f:5b:39:ba:a9
media: autoselect (1000baseT <full-duplex>) status: active
supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 10baseT/UTP <full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX <full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT <full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control>
en2: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:22:41:d0:38:a1
media: autoselect status: inactive
supported media: none autoselect 10baseT/UTP <half-duplex>
vmnet8: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 172.16.95.1 netmask 0xffffff00 broadcast 172.16.95.255
ether 00:50:56:c0:00:08
vmnet1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.179.1 netmask 0xffffff00 broadcast 192.168.179.255
ether 00:50:56:c0:00:01 -
Very Slow Network access for some computers
This has me baffled, I'll try my best to explain.
We have an xserve g5 conected to xserve RAID, the xserve has gigabit ethernet.
All Client computers are also on Gigabit ethernet.
Users are all on network homes on the Server.
Most users are getting descent speeds, transfering a file from the RAID to their (network) desktop takes around 40 seconds for a 1Gb file.
However two users noticed transfer was much slower, 20 mins for the same file.
I've ruled out cable problems and hardware problems because if I transfer to the local computer harddrive the speed is up to around 1 minute.
But I've also ruled out a problem with the user account, because if the same user logs onto another mac the speeds are around 40 seconds.
I tried logging other users into the problem macs and all users drop to 20 minutes.
The only thing I can thing it could be is some problem with how those computers are binding with the server, I tried unbinding and resetting up directory access but that made no difference.
What else can I try other than re-installing?I went ahead and did a fresh install, but this did NOT fix the problem.. I really can't think what else I can do!
Noticed in Network utility there are a lot of received errors when copying a file.
I replaced all the cables but again I don't think its can be a hardware problem because transfer rates are fine from local harddrive to server, but very slow between 2 network disks (unusually slow, considering all other computers are fast transfering the same file to the same place) HELP! -
Very slow wireles printing MG7500
Hello, Two days ago purchased the MG7520 printer. Set it up today and it connected to my wireless (Dish network, satellite). Printing a regular Pages document is pretty slow, but printing a photo is nearly impossible - so very slow it would take 30 minutes to print a 5 X 7. I printed a Network Configuration Page, the signal strength is 100%. I'm running OSX Yosemite on my MacBook Air that is connected to the printer. Not sure what to do next - any suggestions? Thanks to everyone here in advance :-).
Hey, thanks for your help! I tried re-connecting the printer to wireless and moved it somewhat closer too with an unobstructed view. It still printed slow but faster than before, so I think it is definitely the wireless connection. But, just to make sure will pick up an ethernet cable this week and try that. Will also try the USB when I have time later in the week. I have to say that the photo I printed today is exactly the color of the subject so I am VERY pleased with the color printing capability of this printer. And, also very pleased that everything is working fine on the printer regarding both document and photo printing. Thanks again!
-
HP8500 Very Slow to print or pauses in the middle of page.
I have had this printer for some time now and this issue has just started recently. Print jobs used to print right away but now they sometimes take forever to print or on multiple pages one of the pages stops right in the middle of printing and you have to wait a LONG time for it to re-start and finish. Message in window just says "now printing" no errors. I have not added any new programs. Anyone else ever had this problem? Helpful suggestions would be appreciated. Thank you.
Also don't know if this is related or not, the print window is now placed on my screen, sometimes overlaid several times. You have to close each one.
Think Pad SL500
Windows XP Pro Ver 2002 SP3
HP 8500 PremierYou're welcome. I am happy to help. This is definitely a rare instance so I will at least do my best to help out. When was the last time you reset your network? By that I mean, if you have not done this in a while, turn off the iMac, the printer, and unplug the power cord from the back of the router for ten seconds. Plug it back into the router, turn on the computer, and then the printer. This may help.
Also, here is a great document about your computer and what HP suggests for further troubleshooting.
--Slow Printing in Mac OS--
Let me know if this helps you any.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution! -
Very slow network connection via LAN or Wifi problem
Hello,
I am running Windows xp MCE version on my Macbook 2.2. I have a very bothersome problem with my network speed at work.
When I run Windows on my Mac and connect to the network of my workplace using LAN or Wireless, I can surf the local websites and Email by a very nice speed but when I try to open any page outside the companies website, it is very slow or sometime it does not even open it. In status bar it says "Waiting for www...".
I tried almost everything. The problem does not come from my firewall(I even unistalled it). My network setting are like everybody else. I dissabled the auto Comunication speed. nothing seems to help.
It seems to me that this is a problem with windows on Macbook.
I was wondering has anybody a similar problem?
Does anybody has any solution for that?
ThanksHello,
I am running Windows xp MCE version on my Macbook 2.2. I have a very bothersome problem with my network speed at work.
When I run Windows on my Mac and connect to the network of my workplace using LAN or Wireless, I can surf the local websites and Email by a very nice speed but when I try to open any page outside the companies website, it is very slow or sometime it does not even open it. In status bar it says "Waiting for www...".
I tried almost everything. The problem does not come from my firewall(I even unistalled it). My network setting are like everybody else. I dissabled the auto Comunication speed. nothing seems to help.
It seems to me that this is a problem with windows on Macbook.
I was wondering has anybody a similar problem?
Does anybody has any solution for that?
Thanks
Maybe you are looking for
-
Acrobat X problem with image scaling in Excel
We are using Acrobat X standard with Excel 2007. The problem is that when using the Create PDF button on the Acrobat toolbar within Excel, if the document has been scaled using Page Layout-Scale option within Excel, the resulting PDF has the image th
-
Embedded fonts not working in Air for ios
hi am building an ActionScript mobile project 4.6 for ios and want to use embedded fonts for my app. we are using the swf method for embedding the fonts , after loading the xml and even got the embedded resourses from swf , the output is not showing
-
Final cut x frezes at start up
help!!! the rainbow icon just cartwheels and while the software face stays static? Ugh..
-
How do I put notes to an ipod?
I dont understand how to put the notes into the ipod. I have the ipod nano 3rd Generation. I enabled the disk use thingy. It says to add text files to the Notes Folder but I dont see it anywhere on the device on iTunes. help!!!!
-
HT1719 Question on syncing Ipad shuffle
Unable to locate any area in my I-tunes page that shows how to sync my new shuffle. Any suggestions? Thanks, Hank