Very strange (BIG) problem with iWeb!

Hi there,
Hopefully someone can help me and I am not screwed!
When I open iWeb to make changes to my sites (3 in all), it won't open properly. It takes about 10-15secs to load iWeb and for it to appear in the menu bar at the top. Then I get a blank iWeb window with all my sites/pages on the left hand side column as usual. Heres the problem. I can't click on any of the pages to edit them or update the site.
I had backed up the domain file in Applications Support/iWeb and after replacing the one there with the back-up file, there is no change. The site still can't be edited and I can't click on any pages in the left column!
Any help would be great. I've not done anything unusual and I am using the latest OSX 10.4.7 and iWeb 1.1.1.
Thanks, David

Hang on to that backup!
I think this is the time to try deleting those preference files to see if you can get iWeb to function normally again...
"com.apple.iWeb.plist" <== /Users/yourname/Library/Preferences/
"com.apple.iLifeMediaBrowser.plist" <== /Library/Preferences/
If nothing else, then a reinstall of iWeb may be in order. If you resort to this, I would suggest that you download the iWeb 1.1.1 updater directly from Apple...http://www.apple.com/support/downloads/iweb111.html
So what caused this problem, do you know?

Similar Messages

  • Very strange ethernet problem with iMac G5

    Thanks in advance for your help.
    I am helping my boss dust the cobwebs out of our network infrastructure (I work for a relatively small company in Michigan). In doing so, I unplugged all the ethernet cables out of our Linksys 24-port 10/100 switch and blew the dust out of the unit using canned air. I did not spray any of the propellant from the canned air and get anything wet.
    Once I finished cleaning the unit, I powered it up and began plugging cables back in. I decided to try to group all the workstation cables into the first few ports. There are only 7 workstations. The switch indicated that all 7 were connected at full duplex and activity LED was blinking on all 7. I plugged our file server, AirPort and uplink to internet into the last 3 ports, and all the unused cables into the remaining ports. All 24 ports have cables plugged in, but as I said there are only 7 workstations plus the 3 other devices I mentioned. The remaining dozen or so cables lead to unused wall jacks. All ports on the switch were filled before and after the cleaning.
    Here's the problem. One of our workstations, an iMac G5, suddenly was not able to connect to the internet. I checked in the network settings to make sure IPv4 was configured correctly. This particular machine has a manually assigned IP of 192.168.1.16/255.255.255.0. Router and DNS are also manually set. It has to be manually assigned - a public IP forwards to it via NAT in our DSL modem/router.
    I decided to termporarily change this to DHCP. Our DCHP server is on another machine running OS X Server 10.4.11. The DHCP server is configured to assign IPs from 192.168.1.101-200. However, when I set the iMac in question to get its IP adderess through DHCP, it is assigned an IP of 169.254.179.148 (or something close to that). Confused, I checked the DHCP log on the server and found no entry for the problematic iMac requesting an IP.
    I then turned off TCP/IP for the ethernet port, set TCP/IP to DHCP for the AirPort, and renewed. I got IP of 192.168.1.107. So it works properly with AirPort. Disabled TCP/IP for AirPort, FireWire, Bluetooth, enabled using DHCP for ethernet, and renewed. Got 169.x.x.x again.
    Also tried switching ports on 24-port switch (tried 4 different ports), running a 50' CAT5 cable to another ethernet port in same room. Moving machine into the room where the switch is located seems pointless as I've tried multiple ports and cables already. None of my attempts has fixed this problem.
    Please help!

    So it works with AirPort but not over Ethernet?
    Have you tried creating a new location in System Preferences Network pane, and setting Ethernet up from the default settings?
    Make sure the iMac G5 is not set up to do +Internet Sharing+ (using the Ethernet port); look in System Preferences Sharing pane, and turn OFF +Internet Sharing+ if it is currently ON.
    Is one of the other workstations a Mac? If so, you could use it to test the iMac G5's Ethernet port, by connecting it directly and using +File Sharing+ (I suppose you could do that even with a Windows PC).

  • Very strange power problem...

    Hey guys (and girls ofcourse),
    I'm having a very strange power problem with my late 2007 2.2Ghz santa rosa macbook.
    Can you guys help me determine what the problem could be?
    Here's what happened prior, when the macbook was still working. I got home from work, plugged my adapter into the wall, and it started charging. I left it on the table, and when I came back from the diner table I continued working, but suddenly noticed my macbook wasn't charging anymore. (the orange/green led wasn't lighting up but i was able to work on battery power)
    I thought it was the poweradapter, so I went to the apple store the next day to lend one to test it. That didn't work, so it's not the adapter.
    So then I started thinking it must be the magnetic DC connector. So I ordered that from the guys at ifixit, (since it's out of warranty) but I replaced it and it's not working.
    I don't think it's the logic board, because I was able to continue working until I ran out of battery power. And I also don't think it's the battery connector, because if i'm not mistaking, the macbook can run without battery as well, but mine can't anymore.
    Now I can't get any life out of my mac anymore...
    Might there be something I overlooked?
    Any suggestions are definately welcome!
    Thanks a lot.
    Timo from Belgium.

    Hi Timo,
    I think i have the same problem, my mac is not working without battery in it. and it wont charge it.
    i wrote a post here http://discussions.apple.com/thread.jspa?threadID=2105648&tstart=0
    let me know if you have fixed the problem
    thanks

  • Very big problem with JSF about FORM and "id=" for HTML form's elements and

    I have discovered a very big problem with JSF about FORM and "id=" for HTML form's elements and java instruction "request.getParameterNames()".
    Suppose you have something like this, to render some datas form a Java Beans :
    <h:dataTable value="#{TablesDb2Bean.myDataDb2ListSelection}" var="current" border="2" width="50%" cellpadding="2" cellspacing="2" style="text-align: center">
    <h:column>
    <f:facet name="header">
    <h:outputText value="Name"/>
    </f:facet>
    <h:outputText id="nameTableDb2" value="#{current.db2_name_table}"/>
    </h:column>
    </h:dataTable>
    Everything works fine...
    Suppose you want to get the name/value pairs for id="nameTableDb2" and #{current.db2_name_table} to process them in a servlet. Here is the HTML generated :
    <td><span <span class="attribute-name">id=<span class="attribute-value">"j_id_jsp_1715189495_22:0:nameTableDb2">my-table-db2-xxxxx</span></td>
    You think you can use the java instructions :
    Enumeration NamesParam = request.getParameterNames();
    while (NomsParam.hasMoreElements()) {
    String NameParam = (String) NamesParam.nextElement();
    out.println("<h4>"++NameParam+ "+</h4>);
    YOU ARE WRONG : request.getParameterNames() wants the syntax *name="nameTableDb2" but JSF must use id="nameTableDb2" for "<h:outputText"... So, you can't process datas in a FORM generated with JSF in a Servlet ! Perhaps I have made an error, but really, I wonder which ?
    Edited by: ungars on Jul 18, 2010 12:43 AM
    Edited by: ungars on Jul 18, 2010 12:45 AM

    While I certainly appreciate ejb's helpful responses, this thread shows up a difference in perspective between how I read the forum and how others do. Author ejb is correct in advising you to stay inside JSF for form processing if form processing is what you want to do.
    However, I detect another aspect to this post which reminds me of something Marc Andreesen once said when he was trying to get Netscape off the ground: "there's no such thing as bad HTML."
    In this case, I interpret ungar's request as a new feature request. Can I phrase it like this?
    "Wouldn't it be nice if I could render my nice form with JSF but, in certain cases, when I REALLY know what I'm doing" just post out to a separate servlet? I know that in this case I'll be missing out on all the nice validation, conversion, l10n, i18n, ajax, portlet and other features provided by JSF".
    If this is the case, because it really misses the point of JSF, we don't allow it, but we do have an issue filed for it
    https://javaserverfaces-spec-public.dev.java.net/issues/show_bug.cgi?id=127
    If you can't wait for it to be fixed, you could decorate the FormRenderer to fix what you want.
    I have an example in my JSF book that shows how to do this decoration. http://bit.ly/edburnsjsf2
    Ed

  • Got big problem with my iphone , its not charging as it did before i updated (5.0.1) Now its charging very slowly and it doesnt show the charging sign on screen..

    got big problem with my iphone4 , its not charging as it did before i updated (5.0.1) Now its charging very slowly and it doesnt show the charging sign on screen..

    How do you know its charging very very slowly? Is the screen back on?
    Once a month you should charge your phone to 100% then drain it, then charge it back up to 100%.
    Just leave the phone in and do what is said above.
    How long do you think it will take to charge to 100%?

  • Very Strange Internet Problems

    I own a MacBook Pro 15.4 Inch that I purchased about a year and a half ago. I recently upgraded to Leopard and have all the latest updates. I am from the US, and when I am home my internet works fine. However, I am on travel to Seoul, South Korea right now and am having a very strange internet problem.
    As far as I can tell, the URLs that I type in to my browser are, sparodially, not translated correctly into the webpages that they are supposed to represent. This problem is probably effective 75% of the time, and the rest of the time my internet works roughly correctly. For instance, when I enter http://www.google.com, instead of being taken to the Google homepage, I am taking to the homepage of Jammin Beats DJ Service, an obscure website about a company in northern Pennsylvania. The actual URL of this website is http://www.jamminbeats.com, but when my internet is malfunctioning, 'jamminbeats' is for all intensive purposes replaced by 'google' (that is, it applies not only to the main page, but to sub pages, so "http://www.google.com/weddings" takes you to "http://www.jamminbeats.com/weddings" and etc). For most other webpages, one of two things happens. Either I am taken to the correct page but it is displayed without any images or frames (just the html text and links), or I am taken to a blank page with the header "Under Construction", which I assume is the default for a page that doesn't exist. This is why it seems as though the URLs are simply being interpretted erroneously.
    This problem occurs when connecting both to the wireless and the wired internet at my hotel, and it occurs on both Safari and Firefox, so it is not a connection-specific or browser-specific problem. It may be a problem with the hotel's internet, and as of yet I have not had a chance to test the computer at another location. However, a colleague using an IBM computer has had no problems, and I am currently on a Samsung machine in the business center of the hotel and it is working correctly as well. I have searched extensively online for a similar problem but have come up empty handed, and more than anything, I am confused about what might be causing this problem. The strangest thing is that a fraction of the time, the internet functions normally, but it is usually roughly 15 minutes out of every hour, and eventually I am inevitably taken back to Jammin Beats.
    I am a computer science graduate but I still have no idea what would cause this problem. At first I thought it might be a hacker, but if it is, he or she has been at it consistently for 3 days now, and only seems to be targeting my computer. Any ideas or solutions would be greatly appreciated, as I have been forced to resort to the hotel's business center for checking email, doing work, etc. Thanks in advance.

    I did consider that, as I was in Beijing last week and there are a number of censored sites. However, in Korea I have had problems with very basic sites like facebook, wall street journal, google, yahoo, Korean google, my hotel's webpage, etc. Further, I have successfully gotten all of these sites to load seemingly at random, and can access them without problems on other computers. The only disconnect seems to be between my MBP and the internet, not between Korean internet and the web. I have toyed around with the network settings, and although sometimes after switching from "Automatic" to a fixed connection I get some sites to work, it usually only lasts a short time and eventually the same sites stop working. I reset my cache regularly to make sure I'm not getting sent to cached sites, but this also doesn't help. Further, my Apple Mail, Skype and AIM accounts jump between being connected and disconnected randomly as well. Again, this is isolated to my own computer, which is why I'm so confused.

  • I have big problems with mountain lion. you can not have a boot disk system I resulted in the need to re-download the os from scratch impiegandoci 8 hours, it is outrageous even with windows 95.

    I have big problems with mountain lion. you can not have a boot disk system I resulted in the need to re-download the os from scratch impiegandoci 8 hours, it is outrageous even with windows 95.
    at least that the operator has confirmed to me that he called me. I also have problems with either the start of the mac with the power off. I can not understand if it crashes or is just very very slow.
    Finally, I have a problem with the external hard disck. I often said to have been ejected incorrectly (not true) and I start to restore the startup recovery disk because disk utility is ineffective from the normal operating system .. is a shocking thing, but how you reduced. in four years it had never happened. seem to have windows or worse. Wake up.
    I am an Italian, alas, and then I would like an answer to my language because my € are the same as German French or English.

    You are on Windows 2000, you do not have a "Firefox" button, and should consider yourself to be fortunate in that you still have menus and don't have to do anything to get the menus back instead of the "Firefox" button. (The same applies to Windows XP users).
    Use the "File" menu to get to Import. You are not on Windows 7 or Vista, and don't have to put up with the nonsense added for Aero.
    If you want the "Firefox" button you can get it with View -> toolbars -> (uncheck) Menu Bar. The menu bar and the "Firefox" button were supposed to be mutually exclusive (which is impossible in some cases without being incompatible).
    Once you are using the "Firefox" button ...
    Use the "Alt" key to view the menu bar (temporarily) containing File, Edit, View, History, Bookmarks, Tools, and Help. On Windows 7 and Vista, the menu bar was hidden by default in Firefox 4 and above. These menu items are more or less available under the "Firefox" button which has the most used of the built-in Firefox menu items available in a different format.
    To get back to having menus again. "Firefox" button -> Options (second column) -> (check) Menu Bar
    You can make '''Firefox 7.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
    * http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface

  • A big problem with using endnotes in Pages 5

    Unlike Pages 09 which worked flawless with endnotes functionality, Pages 5 has a big problem with the feature that maybe been addressed.
    When I insert an endnote, I am prohibited from clicking the citation number at the end of the document which is supposed to take me back to the inserted citation.
    Am I doing something wrong here or this is just another invaluable feature removed by Apple?
    Please help!!!
    Thank you.

    It's not a feature I use much, so haven't worked at finding the flaws in the Pages 5 version, but going on just how badly Apple has done everything else in Pages 5 I am not at all surprised. It had problems from the beginning and Apple has take over 15 months to do frankly very, very little to fix anything.
    There was much heated debate by certain people on this site who swore blind that Apple would fix everything.
    Just remember the definition:
    Pessimist: n. Optimist with experience.
    Peter

  • Big problem with playing videos on Vista

    I have a big problem with iTunes and Quick Time on Vista. I know other people in the german cmmunity who have it, too.
    If ich want to play a video with iTunes or Quickt Time my PC starts wokring very heavy. Then the programm shut down. Sometimes there is a bluescreen, too.
    In iTunes it is enough just to leftclick on a video an the programm is freezing without an error message.
    I bought a new iPod classic some days ago. With this error i can't use it and 350 € would be thrown away.
    I installed both prgramms again and again but that's no use.

    Seems to be a hard drive issue. I sometimes get the blue screen of death or a message that one of my 2 raid0 hard drives is starting to fall down. If I restart the PC (3 seconds on the power button... since iTunes blocked everything) and declare the hard drive is OK using the Intel Matrix soft provided by Dell on their website, everything is back to normal (as long as I don't use iTunes). Problem only occurs with iTunes. I am currently doing a backup of my complete HDD to an external drive. I'll try moving my iTunes library to this drive and see if it works better from a non raid 0 drive. Will keep you informed. But an external drive is always VERY slow compared to an internal so it can only be a degraded mode solution to the problem. Apple please do something!!!

  • Big problem with a select using remote database

    Hi Guy.
    I have a big problem with a simple query, but this is a scenario.
    Actuallly I'm in Alexandria - Egypt with a server with Oracle 10.2.0.4 database 32 bit on linux Red Hat as 4.8. the server can connect to another database oracle but 9.2.0.6 installed on Red Hat As 4.5 placed in Milano Italy . Ttwo networks are connected via two adsl cisco router with firewall and Vpn functions. In Egypt there isn't a very good adsl.
    In Alexandria, I'm trying to connect to database in Italy with sqlplus. The sqlplus connected I write.. select * from addetti and all work fine.
    My problem is that when I try to make the same select on a table with many columns oracle database kill me a session.
    My table (ic_lav) is long 174 colums 1924 byte for row. Well when I write a query with select * from ic_lav all oracle close my session.
    So I began to change my query I start to
    select field1 from ic_lav... and work
    select field1,field2,field3,..........field50 from ic_lav and work
    select field1,field2,field3,..........field70 from ic_lav and doesn't work
    the select work with 68 columns
    problem: the query with more then 1064 byte for row doesn't work.
    I've tryed with anoter big table with the same problem, but the select fwork with 65 columns...
    Iit is obvious that there is any problem with the limit of the query.
    The same query (select * from ic_lav) in localMilano)l work fine.
    The same query (select * from ic_lav) in vpn with a better adsl line and openvpn software (NO CISCO firewall) WORK FINE.
    The same query connectetd in Milano with a vpn make with analogic modem and remote access by windows work fine.
    the query (make on my laptop connectet with vpn by cisco doesn't work.
    In cisco firewall we haven't any error (cisco man tell me so)
    on database 9 I found :
    *** 2009-06-12 09:49:45.509
    *** SESSION ID:(66.44406) 2009-06-12 09:49:45.497
    FATAL ERROR IN TWO-TASK SERVER: error = 12152
    *** 2009-06-12 09:49:45.509
    ksedmp: internal or fatal error
    Current SQL statement for this session:
    select * from ic_lis where ditta
    ----- Call Stack Trace -----
    but I don't understand why the lost connection problem (bug 3816595 A processstate dump is produced for a lost connection (12152) ) is caused by len of row
    Anybody have some idea ?
    Thank you

    My table (ic_lav) is long 174 colums 1924 byte for row. Well when I write a query with select * from ic_lav all oracle close my session.Do you get any error?
    If the query length is a problem, you could create a view and query the view instead to see if this problem is resolved.

  • BIG PROBLEM with Lenovo A320 wifi - extremly slow

    Hello Lenovo community,
    I have a big problem with my lenovo A320 all in one.
    The wifi connection is extremly slow. I have 3 differen devices at the same place one macbook, one phone and my lenovo a 320 connectet to the same wifi. The macbook and phone get about 50mpbs but my lenovo gets only about 0.3 to 2 mbps. I have tested it wit different networks and differnet routers but is always very very slow.
    When connected via LAN works fast and well but via wifi its useless.
    I have the intel core I3 and Broadcom 802.11n with the newest drviers.
    I have tried everything possible but nowthing helped.
    Can you please help me with any solution ?
    Thank you in forward

    Thats great news for you.. it probally is a defect on my phone, I purchased it new from apple and tommorrow its going in for service..
    I have seen others with similar issues, must be a bacth, I even heard that there are 2 wifi antenas that were used on them, one of them gives problems the other not...
    Just a shame, its a great phone
    thanks for all the feedback

  • Very Strange Focus problem

    I've encountered a very strange focus problem that I hope someone can help me
    with. In my frame, I have a toolbar and some JTextFields. When I press one of
    the toolbar buttons, I do whatever and at the very end I use requestFocusInWindow()
    to set the focus to one of the JTextFields. Now here's the strange part. If I don't
    touch the keyboard or the mouse, I can see the caret in the JTextField as expected.
    As soon as I move the mouse or touch any key, the focus changes to the next
    toolbar button. Makes no sense to me. By the way, I'm running 1.4 on Windows NT.

    Create a new class ToolbarButton extends JButton where you have the following method:
         * Identifies whether or not this component can receive the focus.
         * A disabled button, for example, would return false.
         * @return true if this component can receive the focus
        public boolean isFocusTraversable() {
           return false;
        }This prevents the buttons from getting keyboard focus, this makes only sense for toolbar buttons.
    Cheers,
    Taoufik

  • Very strange MRP Problem

    HI ALL
    I am having a very strange mrp problem and that is
    I created a material with all mrp1and mrp2 requirement,created the info record and source list for that material.I created a reservation for that material which in turn created the deficiency when I did the MD04.I run the MD03,as per re-order point and fix lot size two Preqs created( vendor was not shown in the Preqs even though I established the source list for the material?).I change these Preqs into PurOrds and did the Gr.Every thing fine till here all changes happened in material requirement list(MD04).Now I did one more reservation and created the deficiency again and run MD03 again with a message that mrp done but this time when I went back and checked MD04, there is no Preqs shown and deficiency remained  same as was before. I did the same exercise on several material and every time I am having the same problem as the 2nd time the Preqs don't show in MD04. Please help me as I check upto my knowledge but unable to resolve this one.

    what is the control parameter of the MRP run that you select.

  • Very Strange Bluetooth Problem

    Hi There
    My mac seems to have developed a very strange bluetooth problem. When i try to connect my mighty mouse, it 'connects' then a couple seconds later disconnects, then connects and disconnects etc. during the time that it is apparently connected, the LED on the bottom of the mouse keeps flashing in the way it does when it's searching for a connection, which tells me it ain't connected at all.
    Thinking this was just a mighty mouse problem i try connect my iPhone, same problem. This time I do it with the bluetooth preferences open i notice that the status of the iPhone connection has gone funny (like it has not connected on top of the word connected in the status, one atop the other) this weirdness happens irrespective of what you connect, and only to the iPhone status, even if it's bluetooth is off.
    This weird status thing has happened before, when i was messing about with bluetooth tethering on my iPhone. So, naturally, i assume the iPhone's buggered up the system somehow. I remove it from the list of paired things and try the mouse again, no luck. I try to re add the mouse, but the pairing process doesn't complete itself before the mouse drops signal again. I can't re-pair my iPhone either for the same reason.
    how can i fix this?
    Cheers, Joe

    Hey there,
    Navigate to HD > Users > Your Account > Library > Preferences.
    Locate, and move to the Trash, this file com.apple.Bluetooth.plist.
    If still no luck, try zapping the PRAM to see if that helps. Instructions on how to do that can be found [HERE|http://support.apple.com/kb/HT1379].
    B-rock

  • Hi I've a big problem with adobe acrobat reader XI pro and I hope you can help me. The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reade

    Hi
    I've a big problem with adobe acrobat reader XI pro and I hope you can help me.
    The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reader (adobe pdf reader, internet browsers, ...etc.).
    This problem started to happen since yesterday when I installed adobe acrobat reader XI pro to try it before I buy it, and before that when I was using the free adobe pdf reader I was totally able to copy any text from any pdf and past it anywhere with nothing wrong.
    What can I do?
    thank you a lot.

    There is no product called Adobe Acrobat Reader Pro. There is
    - Adobe Acrobat Pro ($$)
    - Adobe Reader (free)
    Which do you have? And are you a programmer?

Maybe you are looking for