Very strange problem with wrt54g

i have been a network technician for several years and the problem i'm having with my home network is a new one on me. after months of working just fine, i have started having problems connecting to objects outside my local network. after doing some investigation, i found that i could not ping the router...although everything else within the network could be pinged. i thought maybe the dhcp or something weird was breaking...as that has happened before, so i bought a new router...same story...new router....same story. it works fine for about 10 minutes....issues ips, can connect...then all the sudden cannot connect to anything outside the lan. what is really weird is that i can ping anything, inside and out of my network, just not the router. if i cycle power it will work fine...for 10 minutes. also, i can connect through other ports...such as my bittorrent program. torrents stay connected...just not the web. any ideas???

ensure that the router is running on the latest firmware....otherwise seems to be a hardware failure to me...

Similar Messages

  • I have very strange problem with Iphone 3gs. Whenever it gets little hot or exposed to 30 degree temperature it losses signals (No service). Whenever it is cooled down the service is back. Please help!

    I have very strange problem with iphone 3gs. Whenever it gets little hot or exposed to 30 degree or above temperature it losses signals (No service). Whenever it is cooled down the service is back. Whenever I am using Skype or playing game for a while it losses carrier signals and wifi. When it is cooled down afer shutting down the carrier signals and wifi are back. It is for sure problem is with heating, but 30 degree tempeature in Oman is normal and some time it goes upto 50 degrees. I have noticed this has started after I started using substandard charger as I lost my original charger of the phone. Please help!! Thanx.

    The specifications define an operating range up to 35 degrees.

  • 10.4.10 update and very strange problem with Mac Mini

    Dear All,
    I have just updated my Mac Mini Intel and I am having a strange problem.
    My Mac Mini has problems booting up. Sometimes I get through the login screen as normal but my wallpaper shows and there are no desktop icons, no dock, no top of screen finder menu bar. Some other times I get stuck in the progress bar of the booting up.
    I tried to run utilities from install disk and there were no problems detected.
    The VERY STRANGE thing is that several times now as I put my fingertip onto the power button laying it on the button but not pressing it yet (because I would like to shut down the system), the system kicks in and becomes unfrozen!!!
    Someone in the 123macmini.com forum says that this problem is related to the airport receiver which is near the power button.
    What do you think about it???
    MacBook and MacMini   Mac OS X (10.4.10)  

    ok, I have found a kind of fix for the problem, although may run a hardware test to check something!.
    I unplugged all USB and Firewire devices, I turned off Bluetooth and Airport, reinstalled the 10.4.10 combo update, when it restarted the starting mac osx screen took barely a second or 2 to load (my comment above is becuase from when I first got it on Sunday I noticed it was slow to boot up, also noticed that the screen resoulution I have set does not kick in until I log on, although this may be becuase this mac mini is an intel one). The computer booted up very quickly and I tuend on bluetooth and airport with no issues and plugged all the usb and fireware devices back in. I again turned the airport off and restarted and again it booted up very quickly logged on and swithced the airport back on. I decided to reboot with the sirport on and it got stuck at the end of the os x starting up screen, I waited a few mins switched it off and on again and it booted up fine although slower. I dont mind turning the airport off when I power down as the mac usually stays on anyway. I assume Apple will release a fix for this as a lot of people seem to have the problem so think I will stay put with this for the time being. It was taking a several goes to get to the login screen before but usually got there every few boots.

  • Urgent question very Strange problem with an external HD on mac PRO

    Hi,
    I have a problem with a external HD on my mac pro.
    After many month of regular use with out any problem today when I turned on the HD I could not see it in the finder anymore.
    I use this HD for backup of an other external HD and to do the back up I use an application called SYN SYNC
    The strange things are:
    1) If I start Sync Sync everything works properly as if the sofware recognize with out problem that the HD is effectively there.
    2) If I open DISK UTILITY I can see the HD and if I try to repair it the utility after 2 minutes says that everything is ok.
    3) If I look for the mac pro (to which the external HD incriminated is connected) on a different mac in my studio over the net I can see the external HD and I can browse the folder, copy items from the esternal HD to the MAC and even copy thing on the external HD.
    I tried to connect directly via Fire wire 800 the HD on a different MAC and I could not see it like on the mac pro.
    Does enyone have an idea of what's going on?
    best regards
    Lorenzo

    I can still see all the others external Hd with out any problem and I already try this but no results I can't see that HD on the desktop and neither in the sidebar.
    As I said the strange thing is that the external HD shows the same behaviour when is connected to a different MAC.
    Seams the problem is with the HD not with the MAC.
    I even try to use a different case for the HD using also USB connection instead of FW, but nothing change!

  • Please Help - Very strange problem with internal String encoding

    I created a file in one-byte russian encoding cp1251 and declared String literal with 2 letters:
    String str = "ab"; //attention! ab - two russian characters
    After I got bytes from it - str.getBytes("cp1251") - it returned 2 byte's array.
    Now I created a file with UTF-8 encoding with equal content and suddenly:
    After I got bytes from it - str.getBytes("cp1251") - it returned 4! byte's array. Why?
    I need to get a one-byte encoded arrays (cp1251 or koi8-r) but getBytes ALWAYS returns two-byte encoded arrays.
    It is very strange: cp1251 is always one-byte encoded, but .getBytes("cp1251") returns two-byte on each letter. Why? Please help.

    I did not read a string from a file. I created 2 .java files with different encodings (cp1251 and UTF-8) and compiled them, telling compiler with -Dfile.encoding=*** to read them correctly. While execution java interprets two looking equal in editor strings as different objects with different .intern() representation.
    Why java consider source .java file encoding while creating internal representation of String object and creates from looking equally in editor strings two DIFFERENT Unicode representations. And it is impossible to convert one representation to other - impossible to get two equal byte[] arrays.

  • Very strange problem with sound in dvd player

    Hi
    I have a strange issue which I am cannot resolve. I recently purchased season 2 of NYPD Blue on dvd, region 1 (http://www.amazon.com/gp/product/B00008YGRR/qid=1151702794/sr=1-3/ref=sr13/103-1409159-4182204?s=dvd&v=glance&n=130). The season is spread over several discs. The region of the dvds is the same as that of the superdrive on my 1.25 factory spec 15” pb running 10.4.6.(always has been region1) On playing the dvds in dvd player, the sound is very quiet, and you can hear a slight hissing noise (picture is fine). However, if I set the balance of the speakers in system preferences to the left (as far as I can) the sound becomes louder and the hissing disappears. Hence the sound is normal, other that the fact that it is unbalanced. The same happens if I set the balance to the right. Hence the hiss is only there when the balance is set to the centre or around it i.e. slightly to the left or right. This problem is true of all the dvds in the set.
    Fair enough, the nypd discs are defective.
    However, I then played them in a standalone dvd player without any fancy sound settings etc and no problems at all. Hence I then thought that the problem was with my pb - the only different thing I have done lately is use handbrake to put some of my other dvds (not these NYPD ones) on my iPod, so I thought that handbrake had done something (although I don’t know see how it could have done anything). However, today I tried some other commercial dvds in my pb (produced by the same company) and they sounded fine as has been the case for over two years. Hence, there is something about the nypd blue dvds which affects the quality of the sound output in my pb when the balance is centred. However, whatever this is it doesn’t seem to bother standalone players, nor is it something that anoth of my other dvds have.
    Any ideas on what exactly is going on here, as it has me stumped.
    (I don't have any other season of nypd blue, so I can't see if these have the same problem as well.)
    Thanks
    Jef Raskin. A true genius. March 9, 1943 - February 26, 2005 (I'm not Jef!)    

    DVD

  • [Solved] Very strange problem with kernel-modules & NTFS write speed

    I was getting very low copying speed when copying files to NTFS partitions, around 8-10 MB. But, when I commented the modules section in /etc/rc.conf file, the speed dramatically improved upto 5-6x. Now, it also created some problems for me. Like vboxdrv is required by Virtualbox to function & cpufreq_ondemand is required by my AMD processor. Please help me & tell what I'm doing wrong. I'm also posting the output of my /etc/rc.conf file here
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
    # startup and during the boot process. If set to 'no', the C locale is used.
    # HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
    # in the hardware clock being left untouched (useful for virtualization)
    # Note: Using "localtime" is discouraged.
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    # VERBOSE: Verbose level (from 1 to 8). man 3 syslog for level info
    LOCALE="en_US.UTF-8"
    DAEMON_LOCALE="no"
    HARDWARECLOCK="localtime"
    TIMEZONE="Asia/Kolkata"
    KEYMAP="us"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    VERBOSE="3"
    # HARDWARE
    # MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
    # Replace every !module by an entry as on the following line in a file in
    # /etc/modprobe.d:
    # blacklist module
    # See "man modprobe.conf" for details.
    #MOD_AUTOLOAD="yes"
    #MODULES=(microcode powernow-k8 cpufreq_ondemand cpufreq_powersave vboxdrv vboxnetflt )
    # Udev settle timeout (default to 30)
    UDEV_TIMEOUT=30
    # Scan for FakeRAID (dmraid) Volumes at startup
    USEDMRAID="no"
    # Scan for BTRFS volumes at startup
    USEBTRFS="no"
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
    HOSTNAME="AX-64"
    # Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
    # Wired network setup
    # - interface: name of device (required)
    # - address: IP address (leave blank for DHCP)
    # - netmask: subnet mask (ignored for DHCP)
    # - gateway: default route (ignored for DHCP)
    # Static IP example
    # interface=eth0
    # address=192.168.0.2
    # netmask=255.255.255.0
    # gateway=192.168.0.1
    # DHCP example
    # interface=eth0
    # address=
    # netmask=
    # gateway=
    interface=eth0
    address=192.168.1.2
    netmask=255.255.255.0
    gateway=192.168.1.1
    # Setting this to "yes" will skip network shutdown.
    # This is required if your root device is on NFS.
    NETWORK_PERSIST="no"
    # Enable these netcfg profiles at boot-up. These are useful if you happen to
    # need more advanced network features than the simple network service
    # supports, such as multiple network configurations (ie, laptop users)
    # - set to 'menu' to present a menu during boot-up (dialog package required)
    # - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network.d
    # This requires the netcfg package
    #NETWORKS=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    # - prefix a daemon with a ! to disable it
    # - prefix a daemon with a @ to start it up in the background
    # If something other takes care of your hardware clock (ntpd, dual-boot...)
    # you should disable 'hwclock' here.
    DAEMONS=(hwclock @acpid syslog-ng network netfs dkms_autoinstaller sshd @crond @alsa dbus hal gdm @cpufreq @cpu)
    Last edited by tarun.hellknight (2012-02-04 16:55:39)

    Sorry for replying late.. Was very busy.. So, the thing is that I disabled every module & loaded only microcode & powernow-k8 in /etc/rc.local. Now, I'm getting good speed while copying data but the problem is that the processor is running & full speed i.e. 3.0 GHz. I checked it via cat /proc/cpuinfo. Also, there is a message in the bootime, that i'm posting here..
    grep: /sys/devices/system/cpu/cpu*/cpufreq/scaling_available_governors: No such file or directory
    If it helps, here's the output of cat /proc/cpuinfo
    processor : 0
    vendor_id : AuthenticAMD
    cpu family : 16
    model : 5
    model name : AMD Athlon(tm) II X4 640 Processor
    stepping : 3
    microcode : 0x10000b6
    cpu MHz : 3000.000
    cache size : 512 KB
    physical id : 0
    siblings : 4
    core id : 0
    cpu cores : 4
    apicid : 0
    initial apicid : 0
    fpu : yes
    fpu_exception : yes
    cpuid level : 5
    wp : yes
    flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt npt lbrv svm_lock nrip_save
    bogomips : 6002.74
    TLB size : 1024 4K pages
    clflush size : 64
    cache_alignment : 64
    address sizes : 48 bits physical, 48 bits virtual
    power management: ts ttp tm stc 100mhzsteps hwpstate
    Last edited by tarun.hellknight (2012-02-01 18:49:55)

  • Very, very strange problem with iPod Touch. Won't play in my car.

    I'd understand if I just plugged my iPod Touch into my car and it didn't work. That could mean it's simply not compatiable with my head unit, it could mean the head unit isn't up to date enough for it. However, the first couple of times I plugged my iPod in, it worked perfectly. It charged the iPod, loaded playlists and played the songs without any problems. But suddenly, it has stopped charging and playing songs. It won't even load the iPod anymore. On the head unit it just says it's searching for the iPod, but it never finds it. On the iPod it says it can't be charged on this device.
    I have an Alpine head unit and a 3rd generation 64GB iPod Touch. I really don't understand why it would start saying it can't be charged on the device, when I've charged and played songs on it before. I already know it can work on the head unit.

    Unless I'm missing something Chris, I would think it very important if the Touch was charging from the very beginning. Of course if the Touch was fully charged when you first tried it then the songs would play.
    Are you saying that your Touch appears to be playing tracks fine and has a charged battery, it's just that the sound isn't being played through the Alpine? Does it connect via the headphone socket of the Touch? If so, then plug some earphones in to see if any sound is coming out. If it is then it's either the cable connection to the Alpine (assuming it isn't Bluetooth as I'm not familiar with you Alpine or the Touch version you have) or the Alpine head unit itself.
    You can very easily determine if the Touch is working and thereby eliminate that as being the problem.
    Finally, I'm surprised you don't appear to think that it's important your Touch is being charged as obviously if it's not then after a while it will stop!

  • Very strange problem with wikipedia on my Macbook Pro 15"

    I have a Macbook Pro that I bought in June 2010, 2.66 GHz Intel Core i7 4 GB memory, Snow Leopard OSX (of which all may not be relevent) but recently I've been having possibly the WEIRDEST issue with wikipedia.  I just go to the site, and a split second after it loads the main page, part of it becomes blue almost like it's highlighted.  You may think this is just me being stupid and highlighting text but believe me I've tried to deselect and it isn't any use...I don't even think it's highlighting the page at all.  Frankly, I don't even know what it is.  here's a screenshot:
    http://s1165.photobucket.com/albums/q597/wmblair/?action=view&current=Screenshot 2012-04-16at44957PM.png
    I highlighted part of the body of the article to show that it's something weird with wikipedia and not just me selecting something...I mean, at least one other person must've had this problem at some point, RIGHT?  It really looks like I'm highlighting it but it isn't possible to highlight those two specific parts of the article at the same time.  Hopefully I don't sound crazy, but this has been a puzzling mystery for me for weeks now.
    Anyone have any ideas/suggestions on what could've happened?  Obviously it didn't use to be like this.
    Thanks,
    Will

    wmblair wrote:
    It really looks like I'm highlighting it but it isn't possible to highlight those two specific parts of the article at the same time. 
    I cannot find a way to select two different chucks of text in safari, chrome, opera or omniweb.  In firefox however, I can use the command key to select additional text.  So that implies its a function of the browser implementation.

  • Very strange problem with Ethernet

    (All this started to happen after Maverick update)
    On fresh start everything work OK, Ethernet and Wireless. I usually work only on Ethernet, with Wirelles turned off. But after some time, my Mac just turn Wirelles on by itself, and disable Ethernet connection. What is most strange, after that point I cannot open System Preferences. Start to open (jumping icon few times) and nothing happen, no window, nothing. Only thing I can do is to Force Quit System Preferences. And only after that I can restart Mac.
    Of course, after restarting everything is back to normal, i can open System Preferences, Ethernet is working etc. Didn't figure out yet after which time ethernet stop to work.
    Please help!

    So it works with AirPort but not over Ethernet?
    Have you tried creating a new location in System Preferences Network pane, and setting Ethernet up from the default settings?
    Make sure the iMac G5 is not set up to do +Internet Sharing+ (using the Ethernet port); look in System Preferences Sharing pane, and turn OFF +Internet Sharing+ if it is currently ON.
    Is one of the other workstations a Mac? If so, you could use it to test the iMac G5's Ethernet port, by connecting it directly and using +File Sharing+ (I suppose you could do that even with a Windows PC).

  • Two very STRANGE problems with JWindow and JTextField

    I am having some trouble in the program that I am making. It is a Swing based GUI.
    I have a JWindow with a JPanel in it that holds JTextFields and JLabels.
    problem1----I can't see a caret in any of the textfields but I can still enter text.
    problem2----If I control + tab to another window, and control + tab to get back to the JWindow then I can see a caret, but the caret will not change if I click on another textfield and also I can't move to another textfield to enter text. If i do another control tab, then the textfield that i tried to switch to will have focus, but there is now two carets...the first one is where I was but that field does not have focus. I can do this control-tab for as many textfields as I need to fill, but it obviously is not practical.
    I am using a call to super(Frame frame) when calling my JWindow but that didn't seem to fix it.
    Any help would be great!!!!! thanks john

    try checking out this thread :
    http://forum.java.sun.com/thread.jsp?forum=57&thread=153344
    sounds like your problem, kinda. it looks more like a repaint issue, since u get two carets at the same time - as if the screen isn't refreshing enough (u could give it some Spearmint POLO :)

  • Very strange problem with my 5g

    hello
    i updated my ipod today, he started to reset and now he cant load OS, there is only white apple on the screen, i can`t turn him off and i can`t use him beacause he is freezed
    what i schould do ?
    sorry for my english

    What version did u update with - 1.2 has loads of problems. When I updated mine it came up wit a white screen 2 but when I reconnected it it showed up in my computer as a disk so i downgraded it. But my friend upgraded it again for me and it seems to work ok but no album art.... but try that might work!! If it doesnt it could be that the OS has crashed and you may have to contact apple about it.
    Dell   Windows XP  

  • Very strange problem with ORDSYS.IMGSimilar

    Hi, could anyone explain me why this query:
    select 100-ORDSYS.IMGScore(123) score, ORDSYS.IMGSimilar(a.signature, b.signature, 'color=0.20 texture="0.80"', 4, 123) similar
    from app_img a, app_img b
    where a.id_img = 2377165 and b.id_img = 2377183
    returns
    score: 98.18756
    similar: 1
    while this
    select 100-ORDSYS.IMGScore(123) score
    from app_img a, app_img b
    where a.id_img = 2377165 and b.id_img = 2377183
    and ORDSYS.IMGSimilar(a.signature, b.signature, 'color=0.20 texture="0.80"', 4, 123) = 1
    returns no rows?
    I'm using Oracle DB 10.0.1
    Thanks in advance.
    Stefano E.
    UPDATE:
    if I use this variant
    select 100-ORDSYS.IMGScore(123) score
    from app_img a, app_img b
    where a.id_img = 2377165 and b.id_img = 2377183
    and to_number(ORDSYS.IMGSimilar(a.signature, b.signature, 'color=0.20 texture="0.80"', 4, 123)) = 1
    it works, but in the case of 1 to many image match the performances drop. It seems like in some cases the = 1 condition is not satisfied. Any Ideas?
    Message was edited by:
    thepomy

    instead of request.getParameterValues("")
    use request.getParameter("")==null, because the former
    returns array of values and not one value.

  • Strange problem with desktop

    Hi, I have a very strange problem with desktops and dashboards something else. For example, when I am on desktop 2 and i go to desktop 1, when I click with the mouse on it, it goes again to desktop 2. or when I am on desktop 1 and I go to ddashboard, it returns again to desktop 1 when i click to something in the dashboard.
    but, if i am on desktop 3, and i go to desktop 1 throguh desktop 2, there is no problem. the same if i go from desktop 2 to dashboard.
    I hope i've been clear enough to let you understand this... explanation =P
    Anyone can help?

    My system has started "freezing". Actually, usually when I'm browsing the net, Chromium stops loading pages. Conky stops updating, and usually I can't switch to another programs. I can't start xkill from menu, menu opens but nothing starts. If I run "ls" etc in Terminal, nothing happens
    I can however control+alt+F1 to CLI, but if I try to login nothing happens.If doesn't help even if I kill X (I started it with startx). And if I don't kill X, I can't go back from CLI with control+alt+F7, there's just a black screen.
    I'm using Nvidia drivers also, and XFCE4. This started happening some time ago, I think I was using Gnome2 back then. And I have updated my system, and this has happened at least with 3 kernel versions. There's nothing on logs. Well, actually, there's "TCP: Possible SYN flooding on port 6881. Sending cookies" errors on everything.log. But those don't happen when system freezes. And sometimes Chromium stops loading pages but other programs don't freeze, I think it's a problem with cache or something.
    Not really sure if this everything happens because of Chromium. I think I'm gonna switch back to Firefox and see what happens. Usually I'm running Chromium, Opera (use it just for a couple of pages), couple of Terminals and Kaffeine.

  • Strange problem with 2 different Soundblaster car

    I have a very strange problem with these 2 cards First i had soundblaster li've value which was installed with the default windows drivers. Although it'swas installed correctly in device manager, i hear no sound and when i go to control panel->sounds and audio devices, under the volume tab there?was no audio device and everything?was greyed. But when i restart or shutdown the pc the windows sound suitable for this action played without problems. Media player couldn't play any sound, neither youtube. I downloaded and installed the Li'veDrvUni-Pack(ENG). Everything worked ok but after a while i had the same problem. So i decided to buy a different sound card, the Li've Audigy SE. Installed, worked fine, but after a short period of time i have the same problem. Most of the times when i boot into Windows the sound is ok, after a while (5 minutes or hour) i hear no sound and in the control panel i see the no audio device message although in control panel the card appears to be installed correctly. Any ideas?

    Yes, I agree.
    But my question: is there any software trick that I could use to fix the situation.
    For example, how can I ask 2 keyboards about each one's NumLock state ?
    I know about getLockingKeyState() function, but it always returns the NumState of the regular keyboard. How can I know and/or change the NumLock state of the small one ?
    Thanks

Maybe you are looking for

  • Can't get external speakers to work (not wireless)

    I have the same speakers I had with my former Mac, they are not wireless, they plug in and they are turned on and working perfectly.  But my computer keeps using the internal speaker.  How do I get it to "see" the externail speakers?  I checked all t

  • Interface SAP/ABAP-Host - Non SAP/ABAP Host

    Hi experts, I need to define an interface technoloty between an ABAP-host and a Non-ABAP host. I know, that non-abap hosts are able to call RFC-Function Modules of the ABAP-host and that I can use this method to exchange data between the systems. Thi

  • Ethernet and WiFi not working in browsers

    We have about 13 iMacs and 3 MacBooks connected to our LAN network.  Earlier this afternoon, one of our iMacs (20 inch early 2008) would not connect to Firefox or Safari internet browsers.  However, I was able to log into our practice management syst

  • Drag and drop files to replace older only?

    I often find have folders which share some of the files.  If I drag and drop one folder onto the other I get a prompt for duplicates to keep both, replace or skip.  But how can I ensure that if I select replace Finder will only replace the file if th

  • Sales report with gl numbers

    Hi Gurus, I want to generate a report from SD showing details of Material description (items sold) and amount from G/L Numbers 400013, 400017, 400018, 400001 and 400005.with the gl number also displayed. pls help. thanks Maureen