Very Urgent.. Critical Listener Issue...Please help!!
Dear All,
i'm getting a critical error with the listener. as per client's request we made 6 listners in different ports since the application is port specific so as to balance the load. The Details of the DB server:
Oracle Version: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
O.S. : Microsoft Windows Server 2003 Enterprise Edition(5.2, build 3790)
Service Pack 2
The service pack 2 patch had been applied just yesterday (18hrs)i.e. one day before
The problem is the listener is getting stopped after some interval. and we have to manually stop and start again and again. I've deleted all the listeners and recreated it but all in vain. When i'm giving the STATUS LISTENER command from lsnrctl utility it is getting hanged and forcefully i've to break the command using Ctrl+C.
Please suggest me what to do since i cannot go on monitoring the process everytime? is it because of the patching ? if so, why it is giving error after so long time i.e . after 18 hrs?
Well if tracing is not helping you than I guess the best way out will be to raise an SR only.Because like you mentioned that its getting hung , I guess only the support people will be in a better position to tell some thing abut it.
Aman....
PS: Please don't use "urgent" word in the posts. Its not really a good gesture on a free and public forum where all posters and all posts are alike.
Similar Messages
-
JSP Question..Very Very Urgent....Please help....
Hi...
I am working on customizing existing JSP Page. The idea is to retrieve the customer name as show in 1 and send is as run time parameter to SQL query and use the result of select statement to pass it to 2.
<INPUT TYPE="HIDDEN" NAME="soldtoCustPartyName" VALUE="<%= soldtoCustPartyName %>">.............1
The above line of code gives the customer name. We need to find the site id for the above customer and pass it to the following line of code. site id will replace the hardcoded number '7945'.
pageContext.setAttribute("party_site_id", new BigDecimal(7945), PageContext.REQUEST_SCOPE);...............2
Hence we create database connection to find out site id. The query will return the site id depending upon the customer name as in 1. SQL statement will be something like:
select site_id from ..... where fixed conditions and sitename = (from 1).
How can we create SQL statement to take run time values.
For eg. we do the following to execute Query after connecting to the databse..
Statement statement = connection.createStatement();
ResultSet rs = null;
rs = statement.executeQuery("SELECT party_id from apps.hz_party_sites where cust_name='IBM'");
<% rs.next(); %>
<% out.print(rs.getInt("party_id")); %>
How can the above query be modified to take run time value for cust_name.
THIS IS VERY VERY URGENT.....PLEASE HELP.......Where are these run time values coming from? The user is entering the values into a form with that input?
If so, then the user will need to submit the form, you need a servlet to process the form, take the value from the parameter with the same name as the input, insert it into the SQL statement, and run the database query, get the results and store them in the context you want. -
Very urgent!!! Please help! Anybody from Oracle who can help?
I am using Oracle9i with oracle pool in my JSP for database handling.
I am using OracleConnectionCacheImpl and OracleConnectionCacheImpl.DYNAMIC_SCHEME.
I am also setting max and min limit for connections
ocacheimpl.setMinLimit (5);
ocacheimpl.setMaxLimit (10);
I have used a startup servlet that loads on tomcat startup
creating pool ( that is, OracleConnectionCacheImpl)
This OracleConnectionCacheImpl in then I am putting as
application wide object and getting access to it in all my JSPs
Initially it creates 5 connections. But after some time (2 hrs or
so) all the connections are getting killed. (I can see this
from the "Sessions" tab of the enterprise manager)
Now if I request my JSP then I get error. But after around 30mins
again 5 connections are created automatically( I hope thats what
DYNAMIC_SCHEME would do) and then my JSp works.
My question is why all connections are getting killed and why it
takes so much time to reset the connections again!
Is Oracle's DYNAMIC_SCHEME has got some bug? or I have to do
some settings in my oracle server. Please help
I am using oracle9i in Japanese OS(Windows).Check once *REMADV *.
Amit. -
Urgent and typical issue- Please help!!
Dear All,
I have a BOM material(say M) which is made up of 3 components(say A, B and C).
I procure component A from 3 different countries(T1, T2 andT3), component B from 2 different countries(T4 and T5) and component C from 4 different countries(T6, T7, T8 and T9).I process them and prepare a finished good M(as mentioned above) and export it. I want to track the country of origin of each of the components of this BOM.How can I achieve this?
To make my question more clear ..If I am exporting material M, I should be able to track all the 9 countries(T1 ..T9) because M is made up of 3 components procured from 9 countries(in all).
Since the problem is critical, I would appreciate your urgent help on this.Thanks!!Hi Venkat,
Thankyou so much for your response.I came to know about you beforehand, from one of your students whom you are grooming on GTS.As the problem was really critical I tried to contact you, to seek your help, but couldn't reach you.Can you please mail me your contact number on [email protected]
I need to talk to you for a few minutes to discuss this.
Thanks again!! -
I upgraded my iPad 2 (3G) to the new OS8 and I can no longer connect to 3G. All the settings on the iPad are correct. It just shows that it's searching for a signal. I'm in an area where my signal (pre OS8) was very good in strength. Please help!
Hello Jpahlphoto!
I'm sorry to learn about the issues mentioned in your post. Let's fix this for you OK?
Please restore your iPad and see if that does the trick. You'll find the steps here:
http://bit.ly/16hQAlr
Thanks,
ChristinaB_VZW
Follow us on Twitter @VZWSupport -
Hi there,
Hope you can help me out here.
I've recently purchased a 15" i7 Macbook pro. The machine is but 3 weeks old &, of course, very well looked after.
A few days ago, the built-in trackpad started behaving eratically. Cursor moving by itself, not responding to touch, clicking and opening things involuntarily. Not good at all. Many users seem to have had this exact same issue.
These problems seemed to miraculously stop after a few re-boots and possibly a software update? I really couldn't tell you what resolved the problem.
Unfortunately I now have a totally different problem.
There is a thin, possibly 8 to 10mm horizontal strip across the centre of the trackpad that no longer responds to touch. If I move my finger from the botom of the trackpad upwards (or vice versa), the cursor will stop momentarily as it passes over the horizontal strip. The buttons are fine and the rest of the trackpad is fine. For the moment, I've increased the cursor acceleration so that I can at least navigate round the screen with a smaller area of the trackpad. USB magic mouse seems to work fine.
If anyone else has experienced this &/or found a solution for this issue, please help me out here. I have rifled through endless threads about MBP trackpad issues with little success & do not live close to an apple store/genius bar.
This is a 3 week old machine that cost me a small fortune. To be getting software/hardware issues so early on in it's lifespan is really rather worrying for the future.
Appreciate your help here.
JI'm not sure what caused this, but I extended my lunch break and drove the machine down to the Westfield apple store. I didn't have an appointment with the Genius Bar but I managed to persuade one of the staff to speak to a technician in the workshop. She came back into the store and told me that they had replacement trackpads and that , considering the machine was only 3 weeks old, the technicians kindly sandwiched the repair into their timetable at zero cost. 2 Hours later, I now have a perfectly functioning trackpad/machine.
I can't thank them enough.
My only gripe is that I couldn't speak to a technician to find out what the problem was, how they resolved it or what causes these issues for future reference. Understanding why these problems occur often helps to build your own framework of understanding. Most of the threads i've read about trackpad issues are largely unresolved with people only speculating the problem/solution.
The initial issue I had with the trackpad's erratic behaviour seemed to be a well known problem that many are associating with a trackpad firmware update. Unless by pure coincidence I had an immediate & major hardware fault after it, which is unlikely, my personal guess is that the two issues were related. -
When I instaled new verson my Iphone4 stoped, in the sight shows the Itunes symbol. I tried to connect to Itunes, but can't repair. MISTAKE 3004. What can I do? I'm brasilian and don't speak english very well... Please, help me. Use my e-mail. Junara
<Personal Information Edited by Host>Hello Junara1969,
Thank you for contacting Apple Support Communirties. I have a couple of articles for you to take a look at to troubleshoot your issue.
I would start with basic troubleshooting
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/TS1275
If you are still having the same issue, then there are further steps for this specific error code here:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/TS3694
Regards,
Jeff D. -
Mid 2010 15" MBP i5 A1286 POWER ISSUE-PLEASE HELP-
The MBP works fine when mains connected but the only issue is every time I take the charger out it shuts down on me!!! So I have checked with a multitester & looks good the only thing i find hard to check for power is the battery itself as its hard to get a good connection, also I took to local Apple store & they checked with a new battery but said its still same issue so the guy disconnected nearly all the connecters off to check if they causing issue & he said now the battery is charging.
So they still have the laptop to do further tests etc, but I’m not sure what could be the problem hear as maybe there is some component which is bad so the battery’s not charging or what else could be the issue please help & advice as I’m really confused as if it was something to do with the logic board then surely it would not even charge even after checking with the multitester or like Apple genius done by disconnecting other components...
ANY HELP OR ADVICE WOULD BE HELPFULL,
THANKS GUYSTHANKS FOR THE HELP GUYS!!! BEEN AROUND 5 DAYS & NOT ONE PERON HAS HELPED...
BUT YEAH THANKS AGAIN...
WASTE OF TIME THIS IS... -
I'm having multiple crashes on my new 5s. I can't connect to my Mac Pro!! Power cord broken. How can I fix this without connecting to my MacBook? Very frustrating and disappointing. Please help!!!
Hi there Rlong50,
You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
-Griff W. -
Very urgent!!! pls help to debug!!!
Hi, friends:
when I work on a data loading project, use the script like:
INSERT INTO xhealthcall_script_data
(xhc_call_ended, xhc_switch_port, xhc_script_id,
xhc_fax_specified)
SELECT TO_DATE (hh_end_date || ' ' || hh_end_time, 'MM/DD/YY HH24:MI:SS'),
hh_switchport, hh_script, 'N'
FROM tmp_healthhit_load
WHERE hh_script != 'BROCHURE'
UNION
SELECT TO_DATE (hh_end_date || ' ' || hh_end_time, 'MM/DD/YY HH24:MI:SS'),
hh_switchport, hh_script, 'N'
FROM tmp_healthhit_load
WHERE hh_script != 'BROCHURE';
the problem is, when I execute this script, I always get the error:
ERROR at line 1:
ORA-03113: end-of-file on communication channel
then I was disconnected with database server in sqlplus (kicked out).
Background: all datatype for tmp_healthhit_load are VARCHAR2
This project is really very urgent, is there anyone can help me to figure out this problem?
thank you very much in advance, regards
jerryFrom metalink:
Note: 19790.1
Error: ORA 3113
Text: end-of-file on communication channel
Cause: An unexpected end-of-file was processed on the communication channel.
The problem could not be handled by the SQL*Net, two task, software.
This message could occur if the shadow two-task process associated with
a SQL*Net connect has terminated abnormally, or if there is a physical
failure of the interprocess communication vehicle, that is, the
network or server machine went down.
Action: If this message occurs during a connection attempt, check the setup
files for the appropriate SQL*net driver and confirm SQL*Net software
is correctly installed on the server. If the message occurs after a
connection is well established, and the error is not due to a physical
failure, check if a trace file was generated on the server at failure
time. Existence of a trace file may suggest an Oracle internal error
that requires the assistance of customer support.
*** Important: The notes below are for experienced users - See Note 22080.1
Explanation:
There are numerous causes of this error. It is a 'catch all' type
error which means 'I cannot communicate with the oracle shadow process'.
This usually occurs when the Oracle server process has died for
some reason.
Diagnosis:
Oracle support need more information to determine what caused the
error. The most useful items are:
1) Does this occur when trying to (a) make a connection to the
database or (b) on an established connection ?
2) There should be a trace file from the failed session in
USER_DUMP_DEST
3) Does a particular statement reproduce this problem or is it
random ? Use SQL_TRACE on the session to find the problem
statement. -
yesterday I bought 65$ worth of iTunes music using a iTunes gift card. Then I got these emails saying I am being billed again????? What do I do???? I'm very frustrated with this. Please help me
What e-mail are you talking about?
What exactly did it say?
Are you sure that the e-mail was not your receipt? -
Hello,
I have got a major prolen during transport.
I have GEMPLOYE1 Which is a time dependient master data. which has Attribute called 0COUNTRY_ID.
I have a custome attribute Called Actual PSGroup/Grade GPAYSCGR which has a compounpunding attribute 0COUNTRY_ID
Now when I am trying to transport PSGroup/Grade GPAYSCGR to QA that transport is failing , the log massage is
Characteristic GEMPLOYE1: Attribute GPAYSCGR compounded to 0COUNTRY_ID has a diff. time-dpdncy
If any one saw this issue, please help me to fix the same.
SamitHi Venu,
We can't add authorisation objects on Individual servers.We need to add authorisations on BWD ie Dev system and transport to BWI QUA system.This is the Process we need to follow as per our rule set.
So,As the problem mentioned above if i add some auth. objects on BWD DEV system and transport it to BWI QUA system,it is getting transported Successfully to BWI,but the auth.objects what i have added on BW DEV system is not found on BW QUA system.
What could be the problem for that,Is that the problem with transports like TP error or is it related with some tables of auth.objects...................
Could u please analyse the problem and tell me the solution for this..........
Thanks Much
Swapna.D -
Headerrenderer issue -Please help
Headerrenderer issue -Please help
hi
I have a datagrid and I am doing a custom sorting on the grid(by getting data from DB).
I achieve this by capturing the headerrelease event of datagrid .In thee venthandler I will query from DB and do event.preventdefault to prevent standard grid sorting.
Now I need to display my own custom ascending/descending arrows in the header.i have created an header renderer for this,
In the headerrenderer I am lsitening to the headerrelease event of datagrid and in the eventlistener, as per the sortfield, i am trying to make the sort arrow visible/invisible.
But somehow making the sort arrows visible/invisible is not working.The initial arrow works fine.it is shown the correct column(Name) as done in the init() method.
The eventhandler is invoked on clicking the column headers and all the alerts are shown.
Please see the headerrenderer code below and help me.(code is not complete only the relevant part is included)
<?xml version="1.0" encoding="utf-8"?><mx:HBox
xmlns:mx="http://www.adobe.com/2006/mxml" width="100%" height="100%" horizontalScrollPolicy="off" creationComplete="init()" implements="mx.controls.listClasses.IDropInListItemRenderer">
public function init():void{
headerLabel = dataField.label;
_dataGrid.addEventListener(DataGridEvent.HEADER_RELEASE,sortChanged,false);
if(_dataField.localeCompare('Name')==0)asc.visible=true; }
private function sortChanged(e:DataGridEvent){
var dg:DataGrid=e.currentTarget asDataGrid;
varcolumn:DataGridColumn = DataGridColumn(e.currentTarget.columns[e.columnIndex]);if(_dataField.localeCompare(e.dataField)==0)
if(asc.visible ||(!asc.visible&&!desc.visible))
Alert.show(
'in..');
asc.visible=false;
desc.visible=true;
else if(desc.visible){
asc.visible= true;
desc.visible=
false;
else{
asc.visible=
false;
desc.visible=
false;
]]>
</mx:Script>
<mx:Text text="{_headerLabel}" />
<mx:Image source="{ascIcon}" id='asc' visible="false">
<mx:Image source="{descIcon}" id='desc' visible="false"/>
</mx:HBox>I got the solution!!
i need to assign the headerrendereer to the columns dynamically inorder for this to work:
if anybody wants to know details of solution let me know -
IOS 7 very slow, i have many problem , exemple download documents , typing doc to go . Very slow, sometime no response , please help us for this error,
spacepilot wrote:
i live in the WS10 / 0121 area and have been having similar problems. i have an up to 20mb services, but up to a month ago connected at 4800, then my line went dead for 6 days, and all indis could do was send me new router, which came the day after my line was restored, but had dropped to 2418 and remained so for the past 3 to 4 weeks, then i dropped to 1963 yesterday, and 729 today.
all speeds are far lower on my upto 20mb than they where on my upto 8mb link.
foegot to add, i reported the problem via the report a problem link, which hopefully will be red by someone with a firmer grasp of english that the normal call centre staff
welcome to the forum why don't you start your own subject and post the adsl stats from your router and also run btspeedtester and post the results and someone may be able to offer assistance
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
!!!Very Urgent-Production Issue -Please help
Hello IDMers,
We are facing an issue in production, we updated the AD Process form yesterday. Two fields- Employee Type and Employee ID field in AD User Process form got refreshed for all existing users. Those two fields are empty now for all users.
But these fields have appropriate value in the Xellerate User Table for all users. Now I need to some how populate the Employee Type and Employee ID field for all employees from User Table to AD Process form.
for example: Consider an Employee called Peter- His emp type is Full Time and Emp ID is 100; which i have it in OIM User Table, but this user is provisioned with AD and now i will have to update his AD Process form so that these two fields are populated. I need to do this for all users in OIM. I guess the prepop adapter triggers only when the form is created for the first time. Please suggest me some ideas.
Is there a easy way to do this task?
What my thinking is, I need to have a scheduled task that basically loops through all users and updates their employee type and id field in AD User Form from Xellerate User Table.
Please help me with this as it is highly important.
Thanks again every one for your support all the while.
Regards,
~VSNhey,
i was doing lots of migration from one OIM box to another during our last release. I guess something would have gone wrong while doing an import/export from one OIM system to another.
What I learned was while doing an import the vulnerable object is AD USER (or any resource of OIM) Object (both Process form and process definition), because those are the two objects which you need to import fully no matter how big a change you have done.
So when you do an import watch out for USER DEFINED FIELDS in the process form because for me the two fields which disappeared were user defined/custom created by me. So make sure you export the latest version;even if you didnt make any changes to them better create a new version copy of the form and then export it.
Hope that helps.
~VSN -
Zen 2GB Battery Issue - Please help!
$? I bought two Creative Zen 2GB as their battery life is up to 30 hours. I have a Microsoft Zune and it gets the 4 hours listed but both of the Zen's only get 0- hours per full charge. I fully charge, then run the recovery tool and run disk clean up, format, new firmware. I then add all mp3's at 28 bitrate, EQ off, bass off and keep the volume on 3. In the setup I the brightness down as far as it will go at 0%, I think you should be able to set it to 0%. But what am I missing to only get 0-2 hour max on these two new units? I recently read about Idle shutdown, but yesterday I charged the Zen 8 hours to be sure, then with all the optimal settings I cut it on at 0pm and let it run througout the night and at 9am it had very little charge left...please help with any ideas/suggestions as I just get links from Creative tech telling me things I am already doing.
MickeyMicktarheel wrote:
Excellent, thanks for the replies and I read about the lock function online but it said for 4GB and up I think, but not 2GB. I thought, even with the screen at the lowest, 0% that it was too much lcd and a battery drainer...thanks!
Yes, I have the 2G ZEN player and it does have the "lock function" (often on the Creative's web site they neglect to mention the 2G) - I "lock it" every time I listen to my audio books. By using this function it "closes" (blackens) ?the LCD screen and saves the battery considerably.
When I first bought this player it was the first time I had an internal battery, all the other ones I had used -AAA battery. I was hesitant about using the type of battery in the ZEN player but I can listen ALL day and ALL night and still have battery life left. Then I recharge the battery in the wee hours of the morning, ready to listen to more books and music that day.
Just some thoughts,
katdesigns
Maybe you are looking for
-
How do I change the Facebook account that my photos are shared on?
When I share pictures from iphotos on Facebook, they're going to the wrong account. Does anyone how I can change which acount photos are shared on?
-
Required help with date format
Hi All, I am calling a webservice from plsql, for this I am using UTL_DBWS package. I want to insert the format of date as 'YYYY-MM-DD' only. I used to_char(sysdate, 'YYYY-MM-DD') , but it is throwing error. Please suggest any solution. Thanks and Re
-
Calling a Function Within a For-Each in Powershell
Error: Unexpected token 'in' in expression or statement. At :line:1 char:22 + ForEach-Object ($i in <<<< $fs_size_info) { $i.Name.Name, GetGB($i.Sum) } Code: foreach ($i in $fs_size_info) { $i.Name.Name GetGB($i.Sum) } If I omit the function from i
-
I cant change my monitor back from a (non existent) second screen to my main screen
I change my settings for my monitor in error so now when i load up my pc it doesnt show anything cause it thinks its on a second screen the pc does not have a second screen.
-
My husband downloadeda ringtone he would like to use but we do not know how to apply it. He gota samsung galaxy nexus